My ipod touch 5 wount let me back in after trying to update ios with my computer and now says connect to itunes. it still wount work when i plug it in and click restore for it?

my ipod touch 5 wount let me back in after trying to update ios with my computer and now says connect to itunes. it still wount work when i plug it in and click restore for it?

it went through the extracting software stage but then an error message saying that it encountered problems came up and it didn't restore.

Similar Messages

  • IPod Touch 4G stuck in recovery mode after trying to update iOS!

    so while trying to update to the newest iOS (6.1), the iPod just went into recovery mode and has been stuck there ever since. When I try restoring it, it always begins "Extracting software.." only to then tell me "The iPod cannot be restored at this time because the iPod software update server could not be contacted or is temporarily unavailable".
    I have tried literally EVERYTHING to restore it but it just won't work!
    Also when I run Diagnostics, everything is fine, except for my iTunes Store connectivity part, where it says that the internet connection failed, even though my Internet works just fine & I can open my browser as well as browse the iTunes Store.
    Someone said to let the iPod drain & then recharge for 1 hour & I'll try doing that now but I don't think it'll help much..
    I HAVE NO IDEA WHAT TO DO ANYMORE  :-( someone please help!

    Errors 3000-3999 (3004, 3013, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
    Update to the latest version of iTunes.
    Verify the computer's date and time are accurate.
    Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
    Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
    Test restoring while connected to a known-good network.

  • TS1441 My ipod was recently disabled and now says "connect to iTunes" although my ipod has never been synced to my Mac laptop it will not allow me to. I need help.

    My ipod was recently disabled and now says "connect to iTunes" although my ipod has never been synced to my Mac laptop it will not allow me to. I need help.

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                          
    If recovery mode does not work try DFU mode.                         
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings         
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup (if you have an iCloud backup) see:
    iOS: How to back up
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • HT201210 I've updated my iPad to iOS6. Now saying connect to iTunes, which is saying my iPad in recovery & to restore to factory settings & all media & data will be erased. I DO NOT WANT THIS TO HAPPEN. What can I do?

    I've update my iPad to iSO6. Now saying connect to iTunes, which is saying my iPad in recovery & to restore to factory stting & all media & data will be ereased. I DOT NOT WANT THIS TO HAPPEN. What can I do?

    You have no choice now. Unless you want a brick for an iPad. After you restore to factory settings you can restore from your backup ..... And you do backup don't you? I would never update the iOS software without backing up first. After you restore from the backup, sync with iTunes again and you should be OK. Assuming that you do sync with iTunes .....
    Read this for info on how to restore from the backup.
    http://support.apple.com/kb/ht1766

  • Just updated my iPad it shut off and now say connect to iTunes and when I connect it it says restore ipad hit that button and says that it can't restore

    Just updated my iPad it shut off and now say connect to iTunes and when I connect it it says restore ipad hit that button and says that it can't restore

    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    If you can’t update or restore your iOS device
    http://support.apple.com/kb/ht1808
     Cheers, Tom

  • IPod Touch 2nd gen in recovery mode after trying to update to OS 4.0

    I was trying to update and the usual auto backup came on when you update not the sync iPod one and it was backing up then had an error and sent the iPod into recovery mode I can't get it back out. Tried all the button tricks. What to do?

    I know it is just not right. I keep seeing sites that suggest quickpwn, redsn0w, blackra1n but when I try to use files they are always missing something. My iPod is not "JAILBROKEN" or anything but I have seen video of these techniques being used and they work but for me the programs won't run or I can't find a good source file. I don't want to restore and frankly I feel we should not have to. This is an Apple problem that seems to be constant I have had numerous failures lately and I am not real happy about it. I will try to call them 2mrrw but I doubt they will tell me anything new other than you don't have an apple care plan and there is nothing you can do but restore it. I have found this file that is suppose to fix the problem when you shift click restore and then select it but I don't know how to use it... any ideas would be helpful... ipod2,14.0_8A293Restore I want to know if it will delete all my files on ipod or just fix the OS issue? or if anything else can be done.

  • My ipad turned off and now says connect to itunes. when i do this it says the ipad must be restored but says i can't do it ? i havn't synced my ipad on a pc before and it will not work what do i do?

    help

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • I tried to update to iOS on my ip4 and it didn't go through and the it turned of and now says connect to iTunes I'm beyond mad and would like to know why my phone did this I payed go money for nothing

    I tried to update my iPhone 4 to iOS and it was going fine intell it got to the part where the screen was black with the apple logo and had the loading bar and it didn't load then it shut off for 30 seconds and turned on and said connect to iTunes I payed a lot of money for that phone and. I'm beyond mad......!!!!

    We'll I don't have a laptop but can my carrier fix it I have only had it for 10 months and my 12 month warranty isn't up yet so can sprint fix it that my carrier

  • My ipod is disabled and it says connect to itunes. the only way i found to fix it is to restore it but i dont want to loose all my data. what should i do?

    My iPod is disabled and it says connect to iTunes. The only way i found to fix it is to restore it but i don't want to loose all my data. What should i do?

    You must restore it, losing anything you have failed to backup or store on your computer or cloud service.

  • My ipod touch has been locked,it now says "connect to itunes" i have done this but my itunes says to insert a passcode on my ipod touch so that it can conecct to itunes.But how can i when it wont let me?HELP!

    my ipod touch has been locked,it now says "connect to itunes" i have done this but my itunes says to insert a passcode on my ipod touch so that it can conecct to itunes.But how can i when it wont let me?HELP!

    just219, note that terms of use of this forum includes:
    Do not ask for points. If you feel the system is not clear to users, please provide feedback to Apple; do not instruct other users unless they ask.
    For peterevs169
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                          
    If recovery mode does not work try DFU mode.                         
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings         
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Please help block my ipod touch second generation and forget the code, try putting the code so many times that now says connect to itunes, I connect but will not let me do anything that tells me this should unlock with key and I should do for Please help!

    please helpme i block my ipod touch second generation and forget the code, try putting the code so many times that now says connect to itunes, I connect but will not let me do anything that tells me this  should unlock with key and I should do for Please help!. thanks

    Place the iPOd in recovery mode and then restore. For recovery mode:
    iPhone and iPod touch: Unable to update or restore

  • My ipod touch has been disabled and it says connect to itunes, and I dont have any access to the primary computer that i used first , what do I do ?

    My ipod touch has been disabled and it says connect to itunes, and I dont have any access to the primary computer that i used first , what do I do ?

    put it into recovery mode
    See here
    http://www.apple.com/support/ipodtouch/assistant/restore/
    Then restore
    http://support.apple.com/kb/HT1414
    You'll probably lose all your data

  • I disabled my iPod and it says connect to iTunes I tried that but it doesn't do anything and  I want to get it back to the lock screen ??

    I disabled my iPod and it says connect to iTunes I tried that but it doesn't do anything and I want to get it back to the lock screen ??

    iOS: Forgotten passcode or device disabled after entering wrong ...

  • While updating my iphone software it got intruppted and now showing connect to itune not getting restored

    while updating my iphone software it got intruppted and now showing connect to itune not getting restored please help

    Try doing a hard reset on the phone;
    1. Hold Home and Sleep/Wake buttons at the same time;
    2. Wait for the Apple logo to appear (ignore the slide to Power Off option)
    3. Let go of the buttons when you see Apple on the screen
    4. Allow iPhone to reboot;
    If you are still unable to get the phone to power on, charge, or connect to iTunes; it could possibly require service. (hardware replacement)

  • I have updated my iPhone tithe new software and my phone is now saying connect to iTunes I have tried to do this but iTunes is saying I need to restore my phone

    I have updated my iPhone tithe new software and my phone is now saying connect to iTunes I have tried to do this but iTunes is saying I need to restore my phone help! My phone will now not turn on and only shows connect to itunes

    Then connect it to iTunes. Hope you backed it up, because the restore will wipe your phone.

Maybe you are looking for

  • Material Issued from other Plants

    Hi All, I have 2 question here. I have created a STPO with delivery date say 12.09.2009 from my plant ABC to the Plant XYZ and 140 qty, For this XYZ plant has issued material on 15.09.2009 around 100 qty., Now I am looking for the report ME2W to find

  • Trying to Update iPhoto 6.0.6

    Hello, I have a feeling there is no way to do this but I am trying to update iPhoto 6.0.6 however I can't find the Updates available before 7.1.0. I need 7.0.1 and so on but those updates are no where to be found. I'm assuming Version 7 had to be pur

  • Update EKPO-MFRPN using BADI

    Hi everyone. I'd like to update 'EKPO-MFRPN' using me_process_po_cust. Method is PROCESS_ITEM. <cording>    data: ls_mepoitem TYPE mepoitem.      ls_mepoitem = im_item->get_data( ).      ls_mepoitem-mfrpn = '000000001'.      im_item->set_data( ls_mep

  • Backup Mode and Error Checking

    If I use RMAN why would I want to set the database to backup mode? Is there a way to monitor if RMAN fails or has errors? Can RMAN do compression?

  • Magic mouse is lag on Yosemite

    My magic mouse is lag when macbook air mid 2013 was upgrade to Yosemite. The mouse scrolling is sometimes slow but sometimes too fast on the safari page. How to solve this is problem?