My iPod touch does not connect to my iMac, it just displays the iTunes logo and a USB connector on the screen?
When I conect my iPod touch to my iMac. The screen on the iPod touch displays the iTunes logo and a picture of a USB connector. The iPod touch seems to be frozen in this state. can anybody help with this problem?
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
Similar Messages
-
My iPod touch is off and wont turn on because it has the itunes logo and a usb pointing to it, so when i looked it up online, it says i have to restore it but i don't want to because i don't want to lose all my pictures. What can I do?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My iphone is no longer working I have black screen with a picture of the itunes logo and a USB cable. When I try to connect my iphone to itunes the device is not detected, can anyone help me? I desperatley need my phone back
I have had a 3GS for 2+ years. After upgrading to IOS 4 (now 4.3.5) I began having problems. In the past week, my screen went to the itunes logo and USB cable twice -- unprovoked -- just found it sitting there like that! I connected to itunes and it did restore from a backup but it is a major inconvenience. I am also searching for answers, but better back-up regularly!
-
My ipod is displaying the itunes logo and a usb cord. I've tried resetting it but it didn't work. Any suggestions?
Your in DFU mood do this:
iOS: Unable to update or restore
Follow these steps to perform a recovery-mode restore on your iPhone, iPad, or iPod touch
You may need to perform a recovery-mode restore if you experience any of the following situations on your iPhone, iPad, or iPod touch. The device:
Displays the Apple logo with no progress bar or a stopped progress bar for over ten minutes.
Restarts but never displays the Home screen.
Is no longer recognized in iTunes after an update or restore did not complete.
Automatically goes into recovery mode after having an issue while installing an update or performing a regular restore.
How to perform a recovery-mode restore
If your iPhone, iPad, or iPod touch is already showing the "Connect to iTunes" screen, please go to step 5.
Connect your USB cable to your computer but not to the iPhone, iPad, or iPod touch until step 3.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button down, connect the USB cable to the iPhone, iPad, or iPod touch. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen. When this screen appears, you can release the Home button:
Note: If the image of a battery appears, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again. If you don't see the Connect to iTunes screen, try these steps 1 through 4 again.
iTunes should automatically open and display the following message:
"iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."Note: If iTunes not open after two minutes, please open iTunes yourself.
Use iTunes to restore the device.
If you see the Connect to iTunes screen but the device does not appear in iTunes, follow these troubleshooting steps if you're using a Mac, or these steps for Windows computers.
Additional Information
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. -
MY IPAD IS STUCK FOR ALMOST ONE DAY.. LAST NIGHT I TRIED TO INSTALL THE LATEST IS UPDATE WHICH IS IOS 6.1 BUT THEN MY IPAD2 TURNED OFF AND THE ITUNES LOGO AND USB CABLE CAME OUT ON THE SCREEN SO I TRIED TO CONNECT IT TO MY ITUNES ON MY COMPUTER AND IT SAYS RECOVERY MODE SO I CLICKED OK BUT THEN IT ALWAYS END UP CORRUPTED... AND IM CONNECTED TO MY INTERNET 24/7...I JUST DONT KNOW WHAT TO DO...I HOPE APPLEWILL FIX THIS AS OSOON AS POSSIBLE...SO DISAPPOINTED!! PLEASE HELP ANYONE... BEEN TRYING TO RECOVERY MODE OVER 150 TIMES...
Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
My Ipod touch does not connect to wi fi
my screen crack a friend replaced it,ever since cant connect to wi fi.
it said debug console so i turned off.and still not working. what can i do to fix it?- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router.
- Reset networks settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
Does the iPod see the networks?
Error messages when you try to connect? -
Ipod Touch does not connect to Itunes
I´ve just bought an Ipod Touch, I´ve updated Itunes and OS, but when I connect the Ipod through the USB-port (tried both) it does not pop up in Itunes as with my previous Ipods
What's the specific model (e.g. size/processor speed) of your PB G4? I ask, because my wife's 12" PB G4 (867 MHz), which is capable of running Leopard (barely), has only USB 1.1 ports, not USB 2.0. The requirements for the IPT include USB 2.0 (1.1 is unsupported, apparently works, but not consistently, and often not for a full sync, just for small updates).
(Purchase location is irrelevant.) -
My new macbook pro does not seem to recognize my ipod touch..
The sync screen is not appearing and it is not connecting to itunes.
The Ipod is not getting electricity from the usb port.
The USB ports work well with the flash memories.
What could be the problem?Try here.
http://support.apple.com/kb/ts1591
If you can, try a different USB port.
If you can charge the iPod from a wall outlet, charge to 100%, then try connecting to your Mac. -
HT204387 iPod Touch does not connect with iPad or iPad mini via Bluetooth
I am trying to use my iPod Touch as a Remote using bluetooth and Keynote on my iPad and now my iPad Mini.. it works using WiFi...
Yes, the iPod can control Keynot on an iPad via BTY. See:
https://discussions.apple.com/thread/2394198?start=105&tstart=0
and http://www.themobilepresenter.com/article.php/bluetooth-remote-control -
I started to Update my Ipod, and now it is a useless paper weight, what do I do?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
my iphone has a itunes logo and usb cable picture on the screen....what can I do to get it to work
What happens when you plug your phone into itunes
-
I downloaded the update to my phone and now it won't go beyond the Itunes screen?
Happen on my iPad. When I plugged it back in to iTunes I got a message that it needed to restore. I tried restoring and got "Fatal Error 20008". At that point I called Apple. They are shipping me a new iPad.
-
My ipod touch does not restore properly and comes up with an unknown error (9). What do I do? I have tried restoring it a few times and it keeps coming up with this error. Yet on Itune on my computer, it tells me that the ipod software is up to date. ipod screen is just showing the itune logo and a usb connector.
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
http://support.apple.com/kb/TS3694#error9 -
My son's iPod Touch is displaying the iTunes icon and a USB connector image. He cannot charge or connect.We have tried a different USB cord. We have tried reset his iPod. No luck. Any suggestions?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My computer no longer recognizes my iPod Touch. And the iPod Touch does not recognize that it is connected to a computer. It has worked great for many days until today.
I’ve tried two different Apple cables.
I’ve tried different USB ports on the computer.
I have rebooted both the Mac and the iPod.
I’ve wiggled the cables and checked for dust in the connectors.
The iPod charges using this same cable connected to wall wart. That’s a good sign.
Both the Mac and iPod seem to work fine separate from each other. They just won’t talk anymore.
Mac mini
1.83 GHz Intel Core Duo
OS 10.4.11
iTunes 9.2.1
iPod Touch 32GB, version 3.1.3 (7E18), model PB533LLI found this possible solution on another support thread, so I tried it.
turn off iPod
hold Sleep and Home buttons to start it.
When Apple appears, let go of Sleep button, but keep holding Home button.
When screen goes blank, let go of Home button.
Connect cable and check iTunes to see if it has conencted.
This did not work for me.
I then turned off the iPod, restarted the Mac, and restarted the iPod normally.
I connected them with the cable, and it works like normal. :-)
Maybe you are looking for
-
Using array from one vi in another vi
Hi, Im new with NI LabView and i have few Qs: 1. I'm writing a vi and I'm creating a numeric array in it. How can I use the array (It's content) in a different vi that's I'm writing? 2. How do I link between vi's? Im writing few vi's and pressing a b
-
Scanning problems in Mac OS 10.9.5 - J6480 All-In-One
i can no longer get the scanner to save a scan to a folder or an app (iPhoto, Preview) from within the Acanners and Printers system pref. i have the same problem why using the app Image Capture. I get this message when i hit the Scan button: This fol
-
Adobe Illustrator CS2 v 12.0.1 and Windows 7
We just got new computers for our office (Dell M4500) with Windows 7 and Office 2010. I re-installed Adobe Illustrator CS2 v 12.0.1 on the machine and today I started it for the first since I re-installed it. Before starting Illustrator, I was going
-
IPhone 5 camera has a problem it's crashed on the shutter
My camera on the iPhone 5 has crashed on the shutter so I can't take photos or videos how can I fix the problem ??? Help
-
Cannot install BPEL 10.1.2
Hello, I have downloaded teh latest bpel software from otn. I am unable to complete the installation. everything goes fine till configurating assistant which fail with the following log: ===============================================================