My Ipod touch email stopped working after installing Update

my Ipod touch email stopped working after installing the latest firmware update from Apple what should I do?

Hi, jewlssch. 
Thank you for visiting Apple Support Communities.
If the Mail application will not launch, I would recommend processing any available updates on your Mac Pro and test launching Mail.  If the issue persists, process a reinstall of Mavericks.
Reinstall OS X
http://support.apple.com/kb/PH10763
Make sure to backup all of your data prior to reinstalling OS X 10.9.
Back up your Mac
http://support.apple.com/kb/PH11371
Cheers,
Jason

Similar Messages

  • Ipod touch won't work after installing a new app.

    Hi!
    Last night, I decided to install a new "Alarm clock," app and test it out by setting it to ring a minute later- what a BIG mistake, because during the time it was supposed to ring, it made my Ipod touch completely crash instead. For the past few hours all it's been doing is flashing back and forth between my homelock screen (with the "slide to unlock," bar at the bottom) and the Apple logo, with the round 'processing' image infront of it.
    I have tried many different things to get it out of this funk but nothing has worked! I tried resetting the Ipod by holding down the menu and power button, the screen went black temporarily, didn't show the "slide to power off" bar and then just reloaded with the same two flashing images. I tried restoring it, but it wouldn't restore, until I did a special reboot that I read about via online boards- where you have to hold the power + menu buttons for 10 seconds, then release the power button whilst holding just the menu button for 10 seconds- but, whilst the Ipod did go through the whole restoring process thereafter, it didn't manage to sync up.
    Now, not only does my ipod STILL flash back and forth between those two images. I keep getting an error message of (0xE80000001)! I used a different cable to try and sync up, but the blasted thing still won't stop flashing back and forth between those two images, and the ipod is not being recognised by itunes so the ipod keeps beeping, in and out of itunes and won't sync!
    My ipod isn't 'jailbroken,' I haven't touched it's software or altered it in any way, to how it was sold to me. I would've liked to have brought it back the the Apple store to be looked at, but I don't think they'll help me because the top left hand corner of my Ipod is completely missing after my niece dropped it a few months ago- the Ipod still worked (up until I installed the **** alarm app) perfectly well until now!
    Also, I have a mac, so any tips on how to access/help/fix this problem would have to have instructions for a Mac OS not Windows please!
    Many thanks!

    I keep getting an error message of (0xE80000001)!
    Read here.   iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

  • Ipod Touch internet stops working after 2.2.1

    Hey everyone, for a while now, my internet has stopped working on my ipod touch. After the 2.2.1 firmware update, the internet just stopped. I decided to restore my ipod back the the 2.2.1 firmware and the internet started working again. Is there any solutions to getting it to work again for the 3.xx firmwares?

    The only known problems with 3.x firmware and WiFi are related to old router firmware problems. There is nothing inherently wrong with the touch WiFi and the 3.x upgrade did little else than make the WiFi indicator more realistic and the need for up to date routers more important.
    When you get ready to go to 3.x, update your router firmware or replace it with something newer.

  • IPod Touch sreen stops working after getting wet. After, work again normally for two weeks. Now, sometimes work, sometimes don't. Any clues?

    My iPod took a bit of rain when i'm cooming home. After that, the touch stops responding. I tried restart and everything, but I only get to destroy the iOS. After, I put the iPod under the notebook in order to try to dry him with the heat. The touch work again! I restored the iOS and everything goes fine for two weeks. Yesterday, I plug the iPod for use the iTunes and he wasn't recognized by the iTunes, and the touch stops working again. I restored again the iTunes start to recognize him, but the touch works for a little bit and stop again. I put it under the note and the touch works for time enough for me to turn off the iPod. Anybody has any ideia what is going on? Thanks.
    PS.: Sorry about my terrible english. Is not my mother langage.

    Malarauco wrote:
    Thanks guys, I shut the thing off and left in a bowl with uncooked rice, in found several tips on the net saying that this might help absorve the wet, also this don't seem capable of creating damage to me. I think I will left the iPod in the bowl for three days before turning it on again, that seems ok?
    7 to 10 days is better, and the failure rate is very high, you may need a new iPod.

  • My ipod touch won't work after software update.

    Last month I downloaded a software update for my iPod Touch and afterwards it wouldn't work or connect to my PC. It just showed a picture of the USB cable with an arrow pointing to the iTunes logo.
    I fixed the problem by plugging the iPod into my other PC - where it connected no problem - and I Restored it. I then plugged it back into the first PC and re-synchronized it there. It worked fine after that.
    I just downloaded a software update for iTunes and the iPod Touch, and I have the same problem. I know that I can go through the same time-consuming solution as last time but how do I fix this so that it doesn't keep happening?
    My PC does seem to recognise the iPod as a camera when it connects. Could that be it? Help please.

    Have you tried everything here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    It is normal/expected for the computer to recognize the iPod as a camera.  It would only be a possible problem if you installed a program such as for a camera or scanner.

  • Macbook Pro stopped working after installing updates

    My friend has exactly the same macbook as I do, a few hours ago he did some software updates (more then 10). After his macbook restarted it go stuck in the grey screen with the apple logo. After 15minutes it automatically restarted again, and it keeps doing that...
    We've tried safe mode boot, PRAM, and all the other stuff but nothing works. We're on vacation so we don't have the installation DVDs.
    What should we do?
    Thanks.

    Hello faab:
    Welcome to Apple discussions.
    I am afraid to indicate that you probably will need to wait until you are back and have the software install DVD.
    There is really no way to tell what happened. To fix it, however, you really need the DVDs.
    Barry

  • HT5313 Time Machine stopped working after installing update 10.7.5

    Time Machine does not back up after installation of Mac OS X update 10.7.5. Anyone know if there a fix in progress.

    https://discussions.apple.com/thread/4324046?tstart=30

  • Why did my Windstream email stop working after latest update?

    I can't send or receive emails from my Windstream Email account.  It seems to have started with the latest Samsung update.  Any answers?

        MarcySCS,
    We'll get your emails sending and receiving again! What make/model phone do you have? Have you tried deleting the email account and then adding it back?
    SarahO_VZW
    Follow us on Twitter @VZWSupport

  • HT201263 My iPod touch suddenly stopped working. It was fine, but when I went back the screen had gone black and I was unable to turn it on. It is now unresponsive and my computer does not recognize it when it is plugged in. What should I do?

    My iPod touch suddenly stopped working. It was fine earlier, but when I went back a few hours later, the screen had gone black and I was unable to turn it on. It is now unresponsive and my computer does not recognize it when it is plugged in. I thought it just needed to be charged but there seems to be a larger issue now. What should I do?

    Let your ipod die. Then when it is dead charge it adn turn it back on. After that it should be fine.

  • WiFi stops working after install of latest 10.8.5 update on MacBook 5,1 third time reinstall OS X

    WiFi stops working after install of latest 10.8.5 update on MacBook 5,1 third time reinstall OS.
    MB used as email and surfing tool when on vacation. Worked fine for months. Installed the latest security patch (update) and WiFi quit working. Two days later (still on vacation) WiFi started working again and worked fine for the next 2 days.
    Came home and formatted and reinstalled 10.8.5 and all was fine again. We are selling the MacBook and setup new user, everything worked fine.
    The update came up again so I decided to install it and WiFi instantly stopped working after the restart.
    Does anybody have any idea what is happening.
    Thanks

    Not really, although WiFi has been a longstanding problem for lots of people. I fix for some breaks others.
    However, if you are trying to sell it, you need to revert it back to the OS that shipped with it. You cannot sell your copy of Mountain Lion with the Mac. It is only licensed to you.
    You also need to include the system disks that came with the Mac. If it came with Leopard (10.5), and you have a Snow Leopard (10.6) disk, you can install that if you provide that disk also.

  • The voiceover on ipod touch has stopped working.  not sure how i managed to stop it.  Any ideas how I get it speaking again?

    The voiceover on my ipod touch has stopped working.  Not sure what i have done to stop it.  anyone any idea how i get it started again?

    Turn VoiceOver on or off: Go to Settings > General > Accessibility > VoiceOver. You can also set Triple-click Home to turn VoiceOver on or off. See “Triple-click Home” on page 129.
    copied from page 120, ipod touch user guide 5

  • My ipod touch just stop working the screen is blue I cannot re-set it but the time is correct and it keeps up-dating

    My IPOD Touch just stop working - I was listening to music and it stop.  I cannot power it down or re-start it.  The time is correct and that is I can see at the top of the screen of the IPOD along with the battery info

    Try resetting:
    Hold both the home and power buttons at the same time until the Apple boot logo appears. No data will be lost.

  • Ipod touch has stopped working. the screen showes that it need to connect to power.

    ipod touch has stopped working. the screen showes that it need to connect to power.

    Hey there our3goldens,
    It sounds like you are unable to successfully boot your iPod Touch. I would recommend these steps specifically from the following article, named:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    If the device remains unresponsive or does not turn on (or power on), reset your device.
    Let it charge for at least twenty minutes, then see if it starts normally.
    If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
    If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
    If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
    If the above steps do not resolve the issue, contact Apple.
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • 2ng gen ipod touch, Apps NEVER work after sync, please help a noob

    2ng gen ipod touch, Apps NEVER work after sync.
    am i missing something? i basically have to lose all my apps in order to add tunes.
    its doing my head in, Help pweeeessee..

    Hi
    Try to reset your iPod and then deauthorize and reauthorize your computer, then sync the iPod again.
    To reset the iPod touch just hold the Home and Sleep/Wake buttons until you see an Apple logo appear.
    You can deauthorize the computer from the iTunes Store menu.
    This article: http://support.apple.com/kb/TS1702 provides more general troubleshooting tips for applications purchased from the App store.
    -Jason

  • My ipod touch just stopped working! how do you restore?

    I was playing a game and my ipod touch just stopped working!  How do you restore it , as of now it has a bright white screen and won't power off or even connect to my computer.

    Try restoring via iTunes. If necessary. try placing the iPod in recovery mode using one of these programs and then restore:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                           
    RecBoot tip
    RecBoot may have problems on 64X windows, then try:
    Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single ClickFor MAC or PC           
    The Firmware Umbrella - TinyUmbrella
    Installs blootware on PC too

Maybe you are looking for