My ipod touch has a usb cable picture with an arrow pointingto the itunes logo. the ipod will not connect to a computer and is unable to be turned off as there is no red power slider when the powerbutton is pressed. what can i do to fix this?
my ipod touch has a usb cable picture with an arrow pointing to the itunes logo. the ipod will not connect to a computer and is unable to be turned off as there is no red power slider when the power button is pressed. what can i do to fix this?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
My airport turns off by itself and I have to restart the computer for it to work again and it only turns off again. I have Mac OS X version 10.6.8. What can I do to solve this problem?
Usually the HDD is the frist place to look. Use the original install disk and start up the MBP with the C key down. Go through the installation process until you see on the display a menu bar on top.
Click on UTILITIES.
From the drop down menu select Disk Utility.
Open Disk Utility>First Aid and run Verify and Repair.
What are the results?
Also look at these articles:
https://discussions.apple.com/docs/DOC-3521
http://www.thesafemac.com/mpg/
Ciao. -
2nd gen iPod shuffle stops during play back every 15 min. What can I do to fix it? I turn it off then back on, but it still only plays 15 min then stops.
Thank you....I have tried a few things but I will try to reset and restore.
lllaass wrote:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
lllaass wrote:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I have a brand new Ipod touch with front facing camera. Not sure which generation it is. My wife connected the iPod Touch and chose the restore option when connecting to iTunes. It was a mistake and by the time I got there, I saw the screen with USB cable with an arrow facing towards iTunes logo. I cannot get the iPod out of this state.
Try here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
Also reset the iPod.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears. -
my ipod touch wont play any music, when i try to play a song, it just keeps pausing. no sound comes out of the headphones or internal speakers. what can i do to fix this problem? ive tried charging it and resetting it but nothing works.
my ipod touch has the same problem. I restored it three times, but that can't help.
-
I have an iPod Touch version iOS 4.2.1, 8 G capacity, and whenever iTunes tries to sync my iPod, I get an error message saying "Mobile Backup has encountered a problem and needs to close", and the sync fails. I have tried deleting and reinstalling iTunes, and the same thing happens. What can I do to fix this problem?
Try:
iOS: If you can't back up or restore from a backup in iTunes -
My ipod touch 4g will not connect to my computer. Its not even in the device manager
My ipod touch 4g will not connect to my computer. Not to charge or connect to itunes. My usb ports work fine with everything else. I went and bought a new wall charger that came with a synce cord and it works fine, as a wall charger with wont work with my computer. Ive done the whole rebooting, re downloading itunes, redownloading apple software, the whole 9 yards.
What exactly happens when I plug my ipod touch 4g up if it turns on like it suppose to but instead of going to the home screeen with the little lighting bult in the battery is just acts like its not even plugged in. It just goes to connect to itunes screen.
I sent it to apple and they told me that whatever was wrong with it wasnt under warrenty but didnt tell me what it was. Ugh! It doesnt have water damage, I checked the indicators. So what do I do now? I would rather not go and get it fixed and spend 100 dollars. I would rather try and figure it out myself. Help please!From what Apple said it appears you have a hardware problem. I would either pay to get it fixed or make an appointment at the Genius Bar of an Apple store and discus it with them.
-
Ok earlier today I was at work on break and I usually use this time to check emails,iChat messages ,etc. when I tried to turn my MacBook Pro I hear the sound as if it' is gonna turn on....but my screen is still black mind you the battery is fully charged.....why is that and what can I do to fix this problem......I LOVE MY MACBOOK PRO and I'm upset because of the issue. Can someone please help me ? I'm suffering from MacBook Pro withdrawal :(
If you've activated FileVault, only the users that were authorized to unlock the startup volume will appear in the pre-startup authentication dialog. Once the system has started up, all users will appear in the login dialog.
To authorize more users after the volume has been encrypted, select the FileVault tab in the Security & Privacy preference pane. Click the lock icon in the lower left corner and authenticate to unlock the settings, if necessary. Click Enable Users...
You should only enable users whom you trust implicitly with all data on the system, not just their own data. -
The music on my ipod touch comes out with vocals in the background. What can I do to fix this issue?
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
I have a few iPods (all nanos) that cut off the ends of quite a few songs. When I play the same songs on iTunes, they play through. It's only the iPods that cut off. What can I do to fix this?
Hi
This is the same problem I am having, did you figure it out yet?
Thank you -
Like idk how to ask but would anyone know why my iPod touch 4g will not connect to a computer to my apple account but yet it will only charge I have tried numerous cords and pc's and still the same occurs
Here:
iOS: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X -
Hi i'm trying to restore my iPod classic and it says that the iPod could not be restored. An unknown error occurred (1434) what can i do to fix this? Thanks
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
http://support.apple.com/kb/TS3694#error1015 -
Help!
My ipad touch wont play music, an arrow flashes by the battery icon, which is charged and it just reverts back to the selected song in a second without playing...what can i do to fix this? thanks, joeFirst, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes." -
I get an error that says that LR5 encountered a preview cache error when trying to start LR5 and that it will try to fix it the next time it starts. What can I do to fix this error?
Go to the folder with you Lightroom Catalog (usually in Pictures) and delete the folder ending in .lrpreviews
This contains the previews for the files Lightroom has linked to. They will need to be rebuilt which can be done while working or selecting an amount you want to rebuild and accessing the rebuild command in the Library Dropdown menu... -
all of the apps on my ipod touch dont respond, or will stop working after a short period of time. ive had my ipod for less than a year and this has been a reaccuring issue for a while. what can i do to fix this problem?
Have you tried a hard reset yet? To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
Otherwise, try a restore from an earlier backup in iTunes.
iTunes: Backing up, updating, and restoring iOS software
And lastly, restore to factory defaults in necessary.
B-rock
Maybe you are looking for
-
Error while importing the patches
Dear All, I started importing the patches through Solution Manager.from SAPKB7007 to SAPKITLQ13.But from three days its showing the message EXECUTION OF REPORT AFTER PUT FINISHED WITH RETURN CODE 4. Plz suggest me what to do in situation. 1.can i rev
-
Tableview Cell - setting the font and background colors
Hi, I am developing a BSP with a Tableview. The user asked me about displaying a row with a diferent color (font or background) when some data changes on this table. I am thinking about using a Tableview Iterator to evaluate the content of a cell...
-
What things will be cached after starting a xlet ?
hey! what is Prefetch descriptor and DII descriptor in the application descriptor in the AIT? Do they provide hints to the receiver about which DSM-CC modules should be cached in the initial time,or provide hints to the receiver the all the resources
-
Hi, We have upgraded our development system to BI7.0 SP7 and currently shortdumps in the system when we try to manage/administer the info-providers. The problem seems to be that the interface IF_RSBK_REQUEST has a method GET_DELETABLE which is missin
-
HT4592 Java for Mac OS X 10.5 Update 10
Does Java for Mac OS X 10.5 Update 10 stop Filemaker server from working ?