My ipod touch has stopped playing through my Sony docking station, It only plays through i pod. It's not the docking station as my daughter's ipod works fine on it. It can synch when connected to computer. Any ideas what is wrong?
My ipod touch has stopped playing through my Sony docking station, It only plays through the i pod. It's not the docking station as my daughter's ipod works fine on it. It can synch when connected to computer. Any ideas what is wrong?
Have discovered that I had not in fact updated the ios!!
Went through the process last night and my ipod now works fine on my docking station.
Thank you very much for your advice.
Similar Messages
-
IPod touch has stopped playing through docking station, please help
Please help, my ipod touch has stopped playing through my docking station, what should I do?
Undock the Touch, get a flashlight and inspect the docking connector. Clear any dust/debris you find. Do the same on your docking station.
-
The voiceover on my ipod touch has stopped working. Not sure what i have done to stop it. anyone any idea how i get it started again?
Turn VoiceOver on or off: Go to Settings > General > Accessibility > VoiceOver. You can also set Triple-click Home to turn VoiceOver on or off. See “Triple-click Home” on page 129.
copied from page 120, ipod touch user guide 5 -
Can anyone help me? My ipod touch has stopped syncrinising with itunes following a download from audible. It seems to be recognised as a camera. The ipod sign dows not come up in the left hand side of itunes.
I have now removed and re-installed every piece of Apple Software on my laptop. I assume this would result in the drivers being re-installed.
However, when I plug the iPOD in a message comes up 'Installing Device Drivers'. Then a message comes up that they are installed successfully, but it does also say 'Searching folders for preconfigured drivers...'. After 10 mins I assumed this did not mean anything and closed the window.
It is not convenient for me to check the other computer's drivers. Anyway, the iPOD used to work on this computer. The only thing I have done on this computer re device drivers is to start using a USB mouse (which installed drivers) and I also checked them all for updates. Only the Intel ones updated.
Needless to say the iPOD is still unrecognised in iTunes.
Any further help much appreciated.
John -
My Ipod touch has stopped working all of a sudden. It stopped charging, turngin on etc.....It has frozen twice...Any suggestions? I am out of warranty etc.
Try here:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Frozen and unresponsive -
Ipod touch has stopped working. the screen showes that it need to connect to power.
ipod touch has stopped working. the screen showes that it need to connect to power.
Hey there our3goldens,
It sounds like you are unable to successfully boot your iPod Touch. I would recommend these steps specifically from the following article, named:
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
If the device remains unresponsive or does not turn on (or power on), reset your device.
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
Thank you for using Apple Support Communities.
All the best,
Sterling -
An email sent from my iMac has a button linked to a clip hosted on Vimeo. When received, the link functions on iMac and iPad, but opens a window of app icons on iPhone and iPod touch. Any ideas what's wrong?
For anyone else reading this thread, it is worth knowing that sometimes an email is, or can be, corrupted thereby jamming the works. The solution above is good, but I just wanted to suggest another one.
If the problem arises, go to an online mail access service, such as Mail2Web.com and login to you mail account there and delete the offending message.
Problem solved.
And George, as this is all entirely voluntary, whinging about no takers may not endear people to you. Besides which, a few minutes of searching on Google would have found you a number of solutions. -
i downloaded the GV app to my iphone but i'm trying to set up the app and it says it can't connect to google when i try to sign in to my google account.... any ideas what's wrong? i can access my gmail account just fine with my gmail app on the same phone
What's a GV app?
-
I am using windows 7 starter,just downloaded itunes 10.5.2,while install getting prompt,cannot read ipodservice.exe,and after install itunes is not reading iphone or ipod while plugging in through usb cable. Any ideas ,whats going wrong?
problem solved.
I phone 4s screen froozen -
My buttons and screen work, but I can't activate the screen to see what I'm doing. This is after water damage. Any idea what is wrong? I'm not sure what to fix..
I know the screen works because when it first turned on I saw the apple logo and then the screen. If I hold the home and power button, I see the apple logo when it resets. Then it goes blank again.
I can hear when I get a call and pick up, and I can stop the sound and/or decline the call with the power button and side buttons. It also still vibrates. I'm confused - if the screen works, the buttons work, it vibrates, makes sound, and the touchscreen feature also works... what is wrong for me to fix? Why can't I see anything?!
I appreciate any help anybody has to offer!!!I apologize for the confusion. This was literally the only option on Apple's "Contact Us" section that I was able to access. I assumed that Apple's clear intent to have me go here instead of speaking with someone in live time, and the fact this is on the Apple website, meant I could get some advice... Both over the phone and online they require information I need to see my screen to provide so those are not options. I tried to bypass this when calling through Skype. Some lady who didn't know what was going on, who I waited a good while to speak with, put me on hold; I gave up after 30minutes of waiting to speak to somebody again.
I've stumbled upon a few tricks to help me get through this problem, but I'm at a loss. I need this phone to work until late December. I need more tricks. So yes, it's worth understanding. Knowing what is going on will let me Google it and work with it, if nobody here is willing to help...
And yes, it IS a glitchy phone. It has been a glitchy phone for a long time. Long before this. But completely unrelated issues. I was assuming this wasn't just a glitch but something maybe somebody could help me understand. -
Just installed Mac OS X 10.8.5 on a Mac Pro 2010 platform.
The App Store shows there is an upgrade, so I click the download button.
After about 2 hrs the process stops and an Error (102) appears on the screen.
Any idea what goes wrong?
THXYou just now installed 10.8.5? Did you purchase that at the app store?
What is the upgrade being offered?
FWIW, you are not running iOS on a Mac Pro (we are talking about the desktop tower Mac Pro, right?) -
Just installed Mac OS X 10.8.5 on a Mac Pro 2010 platform.
The App Store shows there is an upgrade, so I click the download button.
After about 2 hrs the process stops and an Error (102) appears on the screen.
Any idea what goes wrong?
THXahstephen wrote:
Thank you for the response.
The upgrade I'm interested is for OS X v.10.8.5...
...The App Store page shows 2 different upgrades:
Mountain Lion (10.8.5) Software Upgrade, and
Yosemite FREE upgrade
If the App Store is showing 10.8.5 as an update, what do you currently have installed? The final update to Mountain Lion was 10.8.5, and since the basic OS installation of Mountain Lion is no longer offered in the App Store, that would suggest you're currently at an earlier version of Mountain Lion - 10.8.x where x=less than 5. If that's the case, I'd suggest getting the 10.8.5 update. There is also a Supplemental Update for 10.8.5 and that may be what the App Store is offering. -
I keep getting a message that my ID has been disabled when trying to download an app. I have changed password with apple. Any ideas what is wrong?
If you've changed your password and it still shows disabled then try logging out of your account on the iPad by tapping on your id in Settings > iTunes & App Stores and then log back in and see if that 'refreshes' the account on it
If that doesn't fix it then you might need to contact iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page -
My phone is always charged and always on but when i make or recieve a call it shuts down after 2 mins and just shows the apple icon and after another 2 mins will restart, any ideas what is wrong?
You may have to restore your phone to correct the problem.
-
After a recent upgrade, I've completely lost iPhotos and all my pholto files.
It now comes up with 'You cant open the application iPhoto because it is not supported on this type of Mac'
Any ideas whats gone wrong?Reinstall it:
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2. Download it from the App Store to reinstall It's on your Purchases List* there.
For older versions that have been installed from Disk you'll need these additional steps:
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
*Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.
Maybe you are looking for
-
My new computer did one complete backup on the Time Capsule now I get the message that there is insufficient room to complete further backups. (128 GB available, my backup size is 170GB but the time capsule is 998GB) I suspect that information from o
-
I have an Early 2011 MacBook Pro from Early 2011 that is a 13-inch model... why won't it support airplay? why can't I get a software update to allow it to work?
-
C# console app - print job vanishes in Windows 8 regardless of print driver used; works in Windows 7
I have the following which sends a print file to a specific printer. It works perfectly in Windows 7, but not in Windows 8. The print job shows in the print queue until the print job is closed. Then the print job literally vanishes from the print que
-
To change order of columns in a table
Hi All, I have a table with structure like idx varchar2(250), name varchar2(250), dept varchar2(250) required idx varchar2(250), dept varchar2(250), name varchar2(250) table is created just want to change the order? dont want to drop and recreate tab
-
Query Rewrite (QSM-01263) and Views in Execution Plan
Hello! I created a query rewrite enabled materialized view from a query, which contains only tables (no views). Query rewrite didn't work, so i checked the query with dbms_mview.explan_rewrite, which told my that my query contains references to views