My ipod touch is in dfu mode and does not want to turn on.

my ipod touch is in dfu mode and does not want to turn on.

What happens when you connect the iPod to your computer and restore viia iTunes?

Similar Messages

  • Hi, I wonder what to do because my ipod touch 5 wish neither open and do not want to load. I really wonder what to do, please help me? : $

    Hi, I wonder what to do because my ipod touch 5 wish neither open and do not want to load. I really wonder what to do, please help me? : $

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My iphone 3gs suddenly turned off and does not want to turn back on.

    My iphone 3gs all of sudden turned off and does not want to turn back on.

    Charge it with a wall charger for 15 minutes, then hold the HOME and SLEEP buttons until an Apple logo appears, about 10 seconds.

  • My iPod touch stuck in recovery mode and can not be detected by my lap top.  HELP PLEASE!! Thanks

    It stopped chargin and now is not being recognized by my computer, it says that the device has malfunction. It also is stuck in recovery mode but since it is not recognized by my computer it does not appear in iTunes either.

    - See if placing the iPod in DFU mode will allow iTunes to see the iPod.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    - Try another cable
    - Try different USB ports
    - Try another computer.
    - Last, make an appointment at the Genius bAr of an Apple store

  • M phone is ded and does not want to turn on.

    okay I have an iPhone5c,my iPhone is dead at the very moment, I thought maybe it was just dead, I tried to charge it anyay it does not want to turn back on,at all the screen was just black most of the time it comes out as the little battery with the red charging and the bottom is the plug , although my charger is broken but it always comes out as the stuff  just said but im holding the slep button to turn on as always it does not work CAN YOU PLEASE HELP ME NOW!!!!!!!!!!!!!!!I have ios 8.1 update the latest update.

    If ti has been connected to a known-good charger/cable/outlet, and left to charge for at least 30 minutes, then try this.  Disconnect it from the charger.  Press & hold the Home button & SleepWake buttons firmly for up to 1 minute, watching for an Apple logo to appear.  If it does, then let go of the buttons and let the device reboot.  If it does not, then contact Apple for support options.  Your device may have a hardware failure and need to be serviced/replaced.

  • Ipod touch stuck in recovery mode and will not restore. error code 3194

    ipod touch stuck in recovery mode, will not restore and comes up with error code 3194, itunes is up to date, please help

    Hi @rchangel - Thanks for the ideas...
    Yes - it won't let you install the 32 bit version on a 64 bit machine.
    I've had a cursory look at the SP1 release notes, and couldn't spot anything vital - what critical stuff do you know of in SP1?
    I don't want to have to go through all the pain of setting up VM's, reinstalling iTunes, getting all my album art back in etc. (though I could, as I do have Win7 pro). I've also heard that running iTunes in Windows 7 compatibility mode might help. Can anyone confirm whether that actually works?
    I think it's in Apple's gift to fix this issue, given that they say that they support Windows 7. So far I've had no feedback from a mail I sent to Apple, and the number of users reporting this problem keeps going up and up.
    I want Apple to recognise that there is a problem, and then I want them to fix it.

  • IPod Touch 3G in DFU Mode and won't come out

    Hello,
    My daughter's iPod Touch 3G appears to be in DFU mode, but won't come out. The screen is completely black, and when I attach it to the computer, it comes up with the message "iTunes had detected as an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes." When I hit the restore button, I receive the error message "software for this iPhone is not currently available. Make sure you have the latest version of iTunes and try again."
    I've seen this message posted several times in the forum, and I have tried all the troubleshooting tips offered by Apple Support and in the answers to some of the questions. I am a Systems Engineer, so I consider myself pretty technically savvy. These are the steps I have followed so far:
    1) Completey removed and reinstalled iTunes according to the instructions provided by Apple.
    2) Downloaded the firmware for both the 3G and IOS4 from http://www.felixbruns.de/iPod/firmware/ and attempted a manual install - when I do this, I receive the error message, "the iPhone "iPhone" could not be restored because the firmware is incompatible"
    3) Downloaded RecBoot to attempt to exit recovery mode, but it does not appear to be detecting the iPod.
    4) Attempted to exit and re-enter DFU mode several times to no avail.
    5) Called Apple Express Lane and was willing to pay the 1 time phone support charge, however the agent told me that he could not help me, and that I needed to take the iPod into an Apple store (the iPod is 190 days out of warranty).
    My last effort is to try the install from another PC. So, prior to taking the iPod into the store, I was wondering if anyone has had any success other than the steps I have tried above. I'm appreciative for any assistance anyone is able to provide.
    Message was edited by: kander1625

    Check the model number on the back, "A1318" = 3G, "A1288" = 2G. If it truly is a 32GB 3G Touch, then you're going to have a rough time going back to an iOS version earlier than the current release (4.3.1, available from iTunes). The iOS packs you get from the site you mention are not "signed" and you probably won't be able to install them ... I think 2G owners have better luck with those "unofficial" versions.
    So, if you have a 3G, your best bet is to erase (or move) all earlier iOS versions and let iTunes download a fresh copy of 4.3.1 for the iPod -- no need to go to a 3rd party site. If you have a 2G, then the latest version you can install is 4.2.1, which is also available from iTunes. To increase your odds of this working out, you might temporarily disable any AV software and firewall(s).

  • My 4th generation ipod touch is in recovery mode and will not restore

    Everytime i try to restore my ipod it loads until there is a little bit left to load and then shuts off and itunes says that there is an unknown error (9) and can not restore. Does anyone know what that means and/or what i can do?

    Hi @rchangel - Thanks for the ideas...
    Yes - it won't let you install the 32 bit version on a 64 bit machine.
    I've had a cursory look at the SP1 release notes, and couldn't spot anything vital - what critical stuff do you know of in SP1?
    I don't want to have to go through all the pain of setting up VM's, reinstalling iTunes, getting all my album art back in etc. (though I could, as I do have Win7 pro). I've also heard that running iTunes in Windows 7 compatibility mode might help. Can anyone confirm whether that actually works?
    I think it's in Apple's gift to fix this issue, given that they say that they support Windows 7. So far I've had no feedback from a mail I sent to Apple, and the number of users reporting this problem keeps going up and up.
    I want Apple to recognise that there is a problem, and then I want them to fix it.

  • My new iPod touch has a white screen and does not reset

    Just bought a new iPod touch and I got a white scree and cannot turn it off. I have tried reset via the power and home button but still have the white screen.
    Is there a quick fix or should I just return it under warranty?

    mgerace wrote:
    Just bought a new iPod touch and I got a white scree and cannot turn it off. I have tried reset via the power and home button but still have the white screen.
    Is there a quick fix or should I just return it under warranty?
    Don't mess around with it.  Return it.

  • My iPod touch 4th gen 8GB hot and does not charge

    Help!!! My iPod will only get real hot on the back and will not take a charge when trying to charge it. I have already had the battery switched out so I know that's not the issue.
    thank you

    Then that means a problem with the logic board. Typically it is best to purchase a used iPod.

  • HT201269 What if my iPod Touch is an earlier version and does not have iOS ?

    I want to transfer my music from an older iPod touch to my new iPodTouch iOS 4 but the old model does not have iOs. Am I still abel to perform the action ?

    iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device
    If you have any non-iTunes purchased music on the old iPod that is not in your iTunes library then you need a thrid-party program like one of those discussed here:
    iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device
    For iTunes purchases:
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer

  • My phone completely discharged and is now completely dead and does not want to turn on

    What can I do?

    Hi andreafromcam,
    The following article will provide some troubleshooting steps for this issue:
    iPhone, iPad or iPod touch: Not responding or does not turn on
    http://support.apple.com/kb/TS3281?viewlocale=en_US
    I hope this information helps ....
    Judy

  • IMac turns off by it self and does not want to turns on later, do i have to feel the fan at the back?

    1.- The imac turned off by it self.
    2.- I tried to turned on pressing the turn on/off button and it did not do anything.
    3.- I disconected the computer form the wall and wait for some minutes, and it did no do anything.
    4.- After about 20 minutes i tried again and turned on by pessing the on and off button.
    5.- The imac turned off again and disconected form the wall and conected to another electrical contact at the wall, adn it did not turned on.  i wait for some minutes and turned on again, but after about five minutes it turned off again.
    6.- I left the imac connected to the wall for a couple hours and i tried to turned onn by pessing the on/off button and it did not turned on.
    7.- I left all night connected form the wall and tried to turn it on this morning and it did not turn on.
    8.- This time, I only disconnected the imac cord form the back of the computer and left it for a couple of hours, then I concected and turned on
    9.- All the times that the computer turned on it started like a restart and no announce or windows appear telling me about an error or something like that.
    10.- One of the times I touched the computer at the back and felt it hot, not too hot, but I do not how normal is.
    11.- I can feel some very, very little air at the back form the vent.
    What do I hve to do?
    What kind of tests can I do to know if the computer's an is working ok?

    Contact Apple Service, iMac Service or Apple's Express Lane. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you're eligible for onsite repair since yours is a desktop machine.

  • I have a 4th gen iPod touch that won't power up! I tried all the traditional stuff. I want to know how to tell if the battery is good. itunes see's the ipod in recovery mode. Tried dfu mode and did not work. Any ideas?

    I have a 4th gen iPod touch that won't power up! I tried all the traditional stuff. I want to know how to tell if the battery is good. itunes see's the ipod in recovery mode. Tried dfu mode and did not work. Any ideas? I can hear the PC beep when plugging it in! I suspect a bad battery and trying to charge it ina wall charger made it hot!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. The appointment is free.
    Apple Retail Store - Genius Bar       

  • What to do when your ipod touch is in recovery mode and you dont have access to itunes

    I just got done updating the Ipod . And I had to conect it to iTunes but I am not able to access my iTunes.
    Anything i can do ?

    You have to connect the iPod to your computer and restore via iTunes. The computer has to have an internet connection
    Try DFU mode if necessary to allow the restore.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

Maybe you are looking for

  • Error in generating the condition table.. pls help urgent

    Hi all, I have some condition tables to be generated in CRM from ECC. i am getting the following error for 2 tables : " Generation for application CRM, Usage PR and table CUS601 failed". But other tables data has been corectly downloaded from ECC to

  • HELP! ViewObject Generation From SQL

    Hi, I was wonding if anyone knew how to get a viewobject from an sql statment with 4 paramters and diplay it as a read only form. The sql statment takes 4 parameters form a jsp form. I am currenlty able to get my viewoject from the generated by mysql

  • Upload Master data and hierarchy from BW to BPC : Account Hierarchy

    Hello, I know that you all are aware the property "ACCTYPE" is not available in BW for Account master data. The requirement here is to load master data and hierarchy for Account dimension from BW to BPC. Can anyone suggest the best approach to popula

  • SMTP error, cannot send mail

    I just moved and have begun using RCN internet services. I use mail to access a .Mac account. Now, I can receive mail but not send mail. RCN insists it is a problem with .Mac's DNS and that they are not blocking port 25 nor smtp.mac.com. I can send a

  • Copy Performance question

    I have a Account's dim with some calculated values, the next step is to copy calculated values to GL accounts. Next, I copy from Local Currency to US currency. Is it faster to copy to US before the calc, or to calc then copy to US ? Thanks, Jz