My ipod touch is not being recognized by my computer and gives no feedback when I connect it to my pc

Hi... I really need some help from you guys. My ipod touch is not responding whenever I connect it to my PC. It gives no feedback. The battery image that is shown when I charge my ipod touch doesn't show up unlike if I charge it using the wall charger. I have used different kinds of ports and I ended up with similar things. No response! . However, I can still use my ipod and play music with it. The only problem is its syncing ability is gone. I have only used it for a year now and the warranty that came with it is expired. I hope I can get a good answer from you guys. ThanKs!!!

I am afraid that the solution did not work... the ipod touch of mine seems really not functioning. It receives an electric isgnal from the computer but it doesnt sync at all... Whenever I put my ipod touch off and plug it to my computer it turns on but it doesnt sync... .. Moreover, I have used different PCs so as to try it syncing.. I have used mac book pro and windows 7 laptops but it gives similar feedback, which is NO FEEDBACK at all...

Similar Messages

  • My second Generation ipod touch is not being recognized by the computer and is not charging.

    I plug it in but it wont charge and windows says the device has malfunctioned. help please.

    Try the following and then try a restore:
    - A reset.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Placing the iPod in recovery mode.  See:
    iPhone and iPod touch: Unable to update or restore
    - Placing in DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • My 4th generation ipod touch is not being recognized on my computer ?

    My 4th generation ipod touch is not being recognized on my computer what do i do ?

    iOS: Device not recognized in iTunes for Mac OS X
    or
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or               
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    - Try on another computer to help determine if computer or iPod problem

  • Brand new iPod Touch is not being recognized by my computer

    Hello,
    I just bought a brand new iPod Touch. I had iTunes installed since this is a replacement to a very old iPod. When I plugged my new iPod Touch to start the very first sync, iTunes crashed and started giving me a Windows 7 error (999). After many frustrated attempts to reinstall iTunes (and a few blue screens in between), I followed a recommendation in one of the postings to delete all the Apple programs in a certain order. It worked and I was able to reinstall iTunes. The problem now? My USB, which at one point kept asking for the software to install the iPod, won´t recognized it anymore. Period. I´ve rebooted several times and whenever I plug my iPod in any of the four USB ports, absoluletely nothing happens, as if nothing had ever been plugged in. I tested the USB with my blackberry and it recognized it. Please help!! Thanks!

    Ok, I just figured out so I´ll post it here in case someone has the same issue. I turned off my iPod while connected to the computer. Afterwards, the "other" connection showed up again in the device manager but this time it stayed there without disappearing and with the exclamation point on. I then proceed with one of the instructions in this posting to install the driver for the apple mobile which then showed up in the USB section of the hardware (it was never there until now). Bingo! I got my iPod Touch to connect for the first time! But seriously, why should it be so hard???? I'm concerned with the number of postings here. It looks as if Apple is selling the hottest toys but not be the best ones in terms of quality...

  • HT1386 Since installing the latest itunes to windows 8 my iphone and ipod touch is not being recognized in itune

    Since installing the latest itunes to windows 8 my iphone and ipod touch is not being recognized in itunes, therefore i can't change playlists or add songs etc. Is this a fault with itunes as it was fine with the older version or is there something i can do. I'm not on IOS yet but would like to backup my phone first but can't do that atm due to not being able to view my phone on itunes!
    Thanks

    Hi, jodie_0182.
    I would recommend the steps in the article below.  See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    If the above step does not resolve the issue, try all remaining steps in the article. 
    Cheers,
    Jason H.

  • HT1335 My Ipod touch is not being recognized on my PC as a usb device.

    My Ipod touch is not being recognized on my PC as a usb device.

    Hey MOIMC,
    Sorry to hear your computer isn't recognizing your iPod Touch when you plug it in. I was able to find two articles that might help you out:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    and
    iPod not recognized when connected to Windows laptop over USB
    http://support.apple.com/kb/TS1401
    Hope this helps,
    David

  • HT1510 My iPod shuffle is not being recognized by my computer. I have the original USB cord but when I plug it into my computer there is no recognition. The first time I plugged it in it recognized but never again.

    My iPod shuffle is not being recognized by my computer. It is flashing orange and when plugged in with the original USB cable nothing happens to show the computer recognizes it.

    Flashing orange usually means it is being recognized by the computer.  The flashing means do not disconnected, because the shuffle's "disk" is mounted.
    In iTunes (with the shuffle connected), when you look in the sidebar (left side of window), under DEVICES, the iPod is not shown there?  Does it say DEVICES in the sidebar?

  • My ipod is not being recognized by my computer AND itunes

    When i connect my ipod, its not getting recognized by the computer AND itunes. i've read all the troubleshooting things and nothing works. is there someone who could help me please? i can't put any music, movies or anything on my ipod and just a while ago, all my songs got deleted so i'm listening to very little music now. please help me!
    from,
    troubled travieso

    Did you try using another usb port? my hardrive has two maybe yours does. And if you have a game console, some of those have usb ports so plug your ipod in there and see if that reconizes it.

  • I recently purchased an iPod touch and it is not being recognized by my computer, iTunes is also freezing when I try to close it out.  Anyone have suggestions?

    I purchased an iPod touch for my husband, he was still using the first iPod classic. The iTunes has not recognized the iPod and iTunes is not working properly, it continues to freeze and won't close down properly.  Has anyone else run into this?  He has run the antivirus software, updated his Windows, uninstalled and reinstalled iTunes.  Nothing....any ideas?

    Have yu tried here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • My iPod Touch Will Not Be Recognized By My Computer But By Others

    I had my iPod touch on charge last night and then turned everything off. This morning,, I needed to charge my iPod so I plugged it and my laptop wouldn't recognize it at all. In "My Computer" and iTunes, and it won't even charge. I plug it in different USB ports and it still doesn't do anything. I try a different computer and it works fine.
    What's wrong?

    Have you tried here:
    http://support.apple.com/kb/TS1369
    (iPod not recognized in 'My Computer' and in iTunes for Windows)

  • My new 4th gen. iPod touch is not being recognized by my PC

    When I plug in my new 4th gen iPod touch, the computer just says that it is a USB device that is not recognized, what can I do? My operating system is Windos Vista.

    Does the iPod work OK?
    Have you tied resetting the iPod? Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    Next would be to place the iPod in recovery mode and then restore via iTunes.  If iTunes does not see the iPod then the iPod is not usable. For recovery mode:
    iPhone and iPod touch: Unable to update or restore

  • HT1494 My old iPod nano is not being recognized by my computer.

    I recently lost my iPod touch so I am trying to move my music to my old nano. However, the new iTunes does not recognize it and also says I have only 1 device registered to my Apple ID... I have tried different USB ports, resetting my iPod, charging it, disc mode, updating iTunes, and resetting my computer, but nothing works. Any ideas?

    Try the following and then try a restore:
    - A reset.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Placing the iPod in recovery mode.  See:
    iPhone and iPod touch: Unable to update or restore
    - Placing in DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • IPod Touch 1g not being recognized after installing iTunes.

    Win 7 Ultimate
    itunes 9.0.2 64 bit
    With iTunes or any Apple software uninstalled the iPod is recognized in device manager under portable devices> Apple iPod. I can browse to it within Win Explorer. All looks normal.
    Once I install iTunes and I plug in the iPod a popup informs me that it's imstalling Apple Mobile Device USB driver (and is ready to use). Then iTunes starts up and another popup informs me that device driver was not successfully installed. This time MTP USB Device. It then switches to device unplugged, without touching it. Itunes then reports an error (iTunes could not connect to this iPhone because an unknown error occurred (0xE8000065). Device manger then reports a warning for Portable devices > MTP USB Devices. The device status reports This device cannot start (Code 10) (Apple iPod went away)
    I have tried uninstalling several times. Different iPods. iPod and cable work just fine on another laptop. Updated MB BIOS.
    I need some more clues on what might be wrong. Anybody!!

    Hi, jodie_0182.
    I would recommend the steps in the article below.  See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    If the above step does not resolve the issue, try all remaining steps in the article. 
    Cheers,
    Jason H.

  • My iPod Touch is not being recognized by iTunes.

    I already went through all the sugested tips such as restarting the 'Apple Mobile Device' and updating my computer's softwear. I restarted my computar many times, but nothing is being fixed. Help

    Have you tried this:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    Does it charge?
    Tried anohter cable?
    Another USB port?
    Try another computer to help determine if you have an iPod or computer problem.

  • My ipod touch isn't being recognized by iTunes or my computer. It's in "ipod recovery mode"?

    My ipod touch 5th generation is not being recognized by my computer under devices or in itunes; however, when I click on devices and printers it comes up under "unspecified" and is labeled as "Apple mobile device usb driver." I right clicked the icon and hit troubleshooter and it opened itunes and told me I should restore and update my ipod. I did this twice and nothing has changed, it is still not being recognized. This is a big problem because the only thing that will pop up on the screen of my ipod is the symbol for the usb plug with an arrow pointing to the itunes symbol (meaning plug into itunes I assume). I have tried restarting my ipod and restarting my computer and nothing is working. I have the most recent version of itunes. How do I fix this?

    first try:
    iOS: Device not recognized in iTunes for Windows
    next
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Maybe you are looking for

  • Forms 10.1.2.0.2 - Global Search

    Good day everyone, I've run into several situations with some larger forms where I have a custom procedure and I have no idea where to find the procedure in the form or attached libraries. Is there a way to do a global search in a form to search in e

  • How to get the RFC destination from logical system

    Dear all  ,   i am working on one system and want to fetch data from another R3 sys   i have written call ' FM' dest 'HPCR3' where HPCR3 is hardcoded.   now if i want to remove the hardcoding i need to find out the RFC dest ( HPCR3)   form logical sy

  • Change Data Synchronizer 1.2.5.299 default webside?

    Hello, if i connect via browser to by datasync server, the following message occurs - "Forbidden. Not a mobile device"! Where can i change this entry??? I'am not a cherrypy webserver specialist! Who can help me? Thanks for any answer! Regards, Norber

  • Pinch to Zoom Gesture ISSUE!

    My MacBook Pro, running 10.6.8 SL, is having some major issues with the pinch to zoom, or pinch open & close, whatever you want to call it, only in Safari 5.1! I'm able to only 'pinch' once, but I cannot pinch any further or return it to its original

  • Thinkpad T400, Win 7 Pro 64bit and sleep

    I have a ThinkPad T400 laptop that is running Windows 7 Professional 64bit with SP1. I use a docking station with it as well. When I go home at night, I put the computer to sleep, undock it and take it home with me. On most nights, I don't do anythin