My iPod touch is permanently disabled and it says to connect my iPod to my iTunes yet when I do that, it tells me to type in pass code even though it's still disabled. i cant go to DFU mode cause my home button is broken PLEASE HELP ME GOD I MISS MY IPOD
My iPod touch is permanently disabled and it says to connect my iPod to my iTunes yet when I do that, it tells me to type in pass code even though it's still disabled. i cant go to DFU mode cause my home button is broken PLEASE HELP ME GOD I MISS MY IPOD TOUCH PLEASE :'((
i cant do that sir ,my ipod touch 4g keeps rebooting and rebooting all over again until the battery is empty HELP GUYS PLEASE
Similar Messages
-
My iPod touch is permanently disabled and it says to connect my iPod to my iTunes yet when I do that, it tells me to type in pass code even though it's still disabled. PLEASE HELP ME
I have the same problem with mine... but im trying to find a way to fix it without restoring it...
but one fix is to shut it down completely ... then press and hold BOTH the power button and the home button .. hold both of those 4 ten seconds .. then release the power button but still hold down the home button .. and then it'll show something that says "connect to itunes" once u get it connected to itunes , click the restore button ... BEWARE THIS WILL WIPE OUT EVERYTHING ON YOUR IPOD!!! IT WILL RESTORE IT BACK TO FACTORY SETTINGS , AS IF U JUST BOUGHT IT !!!!! then it should work fine again .. but u will lose all data on there besides the things you have synced with itunes already..
Thats y im iffy with doing this , im trying to find a fix where i wont have 2 restore it but i dont think there is 1 :'(
good luck tho
~sam -
hi guys urgent please help me ASAP my ipod touch 4g reboots/restarts over and over again and i cant enter DFU mode cause my home button is stuck/broken please help guys i cant enter itunes too cause it said it needs my passcode the problem is i cant even enter my passcode in my ipod touch cause its rebooting over and over again help please guys
- See if this program will place it in recovery mode since that erases the iPod and bypasses the passocode.
RecBoot: Easy Way to Put iPhone into Recovery Mode
- Next try letting the battery fully drain. The try again. -
i need help with upgrading my ios for my ipod touch it keeps saying the connection has timed out and i have full bars for internet. So i don't knw wat is going on
I have been trying many times every day for the last few days. Same thing is happening to me. I even uninstalled itunes and reinstalled it and it still won't work. What is up with this?
-
i need help updating my iso for my ipod touch it keeps saying the connection has timed out and i have full internet access so i am not sure wat is going on.
Try deleing the download and try again. It is located:
IPSW file location for Mac and Windows
If yo restore, the iPod will also be update. You can try that. Just make sure that you backup first so yo can restore from backup
iOS: How to back up -
How can i put my iphone in to dfu mode if my home button is broken i am on ios 7
i cannot figure out how to put my iphone in dfu mode with a broken home button on ios 7
Then you use this support document to restore it. http://support.apple.com/kb/ht1212 Then, if the device is on iOS 7, you will need his Apple ID and password for Activation Lock. If he cannot remember that, there is nothing you can do to change that. DFU mode will not correct that. It will be locked and cannot be activated, period.
-
my ipod got disabled and it says to connect it to itunes but the computer i use got reset so it lost all the memory of itunes and i re downloaded it and it says it cant connect my ipod to itunes because i need to put the pass code in on the ipod but it wont let me because its disable some one help me out.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
My ipod touch is disabled and it says to connect to itunes but itunes says it can't sync because it is locked. Any way to unlock and keep data? (apps, gaming levels, music).
Hi,
Take it to you nearest Apple Store and see what they have to say. You should back up you data before you go in but in your case you can not.
xxmitchxx90 -
Often, when I connect my iPod Touch 2G to the PC, instead of showing up as a device on iTunes, a pop-up appears that says I have connected a camera and asks what I want to do. This device doesn't have a camera in it. When this happens, (not always)I can't update my iPod, no matter how many times I try to connect it. I have an old Nano that has never had this problem at all. Can anyone tell me what to do about this?
Try here:
iPhone, iPad, iPod touch: Disabling digital camera notification in Windows XP -
My iPad is disabled and it says to connect to ITunes with my Mac. It still is not working.
Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
My ipod touch 5th gen. 16gb ios 8.1.2 wont turn on, i press the power button and nothing happens, and my home button doesnt work, PLEASE HELP ME OUT!!!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My ipod touch is not working and it won't connect to itunes either what do I do? HELP PLEASE!!!
My ipod touch is not working and it won't connect to itunes either what do I do? HELP PLEASE!!!
-
My iPhone 4 wont turn on, It wont go passed the charging icon and then when I take the charger out it says it needs charge. Its not the charger as iv tried several and holding lock and home button doesnt work please help!!!!!
Hello there, Conorjl7.
The following Knowledge Base article provides some good, practical steps for troubleshooting issues with charging:
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
Particularly:
If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
Inspect the connector at the bottom of the phone:
Make sure that there are no bent pins in the connector.
Make sure that the connector is free from debris.
If there are bent pins or debris, please contact Apple Support.
Otherwise, continue troubleshooting.
Make sure that the outlet you're using works.
Make sure that the Apple USB cable and Apple USB power adapter work.
Plug the device in to power and let it charge for up to 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
If the device still exhibits an issue, try turning your device off and then on again while connected to power.
If the issue is persists, please contact Apple Support.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
My iphone 4s will not allow me to open applcations that I have downloaded. I have tried a few things but still will not allow me to open. Shows they are open once pushing the home button twice. Please help!
Pressing the Home button twice does not show you what apps are running. It shows you what apps were recently used.
Download a free app from the App Store. Once it downloads, your other apps should work properly again. -
my IPod is disabled and says connect to iTunes but when I plug it in it says I need a password. I would put it in recovery mode but my home button doesn't work. any suggestions?
Use the method listed in this previous discussion for placing the iPod in Recovery mode without buttons
Turn on without Home/Power Button
Maybe you are looking for
-
Laptop won't start up! please Help
Hello, Can someone help me with my laptop. I have mac os x 10.2x. It completely froze and and i shut it down. When i press on the power button to start it i just got a white screen with grey apple sign with little wheel spins around, and nothing is h
-
ITunes will no longer accept my password
The same password I have used previously will no longer get accepted so I changed it and that will not get accepted either. Any suggestions?
-
Why does itunes say the entry point is not found
why does itunes say it didn't install correctly and to reinstall?
-
How can config for SNP Aggregate only aggregate demand not stock on hand?
Dear SCM Expert, Now we want the system aggregate only demand and not aggregate stock on hand ( Stardard system aggregate both of them) so what i have to do? thanks so much.
-
hi here the issue is what is impotance of in material master wm1 and wm2 view and can any body tell me the difference between the HUM and SUM what are the transaction codes are using in HUM thanks inadvance.