My ipod touch is stuck on a screen that shows me to plug into itunes but it will not do anything else, its just stuck there, what can i do
My iPod is stuck on a screen that shows me to connect to iTunes and it wont do anything else...What can I do?
Try:
- First
Connect to computer and restorer via iTunes
For how to restore:
iTunes: Restoring iOS software
If still problem
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
My ipod touch is stuck on a screen that show a picture of the USB cable with an arrow to a picture of a CD with a music note over it. I have reset and turned on and off.....what do I do??
Connect it to iTunes and restore it.
B-rock -
I have forgotten my password for iPod Touch 4G and it is now disabled. I tried connecting to iTunes but i haven't synced before and i need to enter the password before i can back it up so i can restore it. I don't want to lose pictures so please HELP!
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased. That is how it works
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
My touch screen is not responding, I have reset the phone, plugged into different charger and tried to update it to itunes but they will not connect because I cannot put my passcode in, HELP please!
ME TOO. NOW MY IPHONE 6 PLUS IS SAME LIKE YOU.
iphone is diabled- connect to iTunes because i forget passcode.
i cannot connect iTunes because it's always asking to enter passcode on iphone.
So, i cannot make restore my iphone 6+. And then, I cann't erase "device" in icloud.
My iphone is new. No icloud. didn't connect to itune backage.
That's why I try to connect iTunes but it need to enter passcode.
So, my iphone just keep "iphone is disbled-connect to iTunes".
IPHONE 6 PLUS -
my ipod touch was water damaged, i hear that we have to restart,rest,restore, but i want to know ,step by step , how to restart,reset and restore
iPod touch User Guide (For iOS 5.0 Software)
-
After my ipod touch restarts because it says plug into itunes and it does not pop up it does not show up in the itunes window like it says it would. why.
Start here:
iOS: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X -
my ipod touch is fully charged but will not turn on have tried soft reset and pluging into itunes but it does not even register it is plugged in help??
See Here > Device Not Recognised http://support.apple.com/kb/TS1538
-
I have an ipod touch and have had it for about six months. I have not had any trouble with it but now it will not let me sync- I have downloaded cds to itunes but when I sync my ipod it does not put the cds on my ipod. I have downloaded new versions of itunes and synced multiple times but it still will not let me put them on my ipod. Any ideas on how to help with my problem?
liddodrea wrote:
Please help, I want to update Itunes but it will not allow me to with this issue.
iTunes free download from www.itunes.com/download -
I purchased a video from iTunes but it will not sync to my iPod. I get a message stating that the video "was not loaded to the iPod because iyt cannot be played on this iPod." I tried to use the "create an iPod version" but the command is grayed out
I was refering to the "sample rate", normally 44.1 KHz, the iPod might not be able to play tracks with a non-standard rate. Otherwise I'm not sure what the issue might be.
tt2 -
After I tried to update my Ipad mini to the newest update, it kept saying hello on my lock screen in different languages and then when I slide the screen across, it says connected to itunes but it's not doing anything!! By the way my Ipad mini is plugged into my computer and connected to itunes!! Please help me!!
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
Tried restoring my iPhone 4s iTunes said it couldn't restore it and now iTunes won't recognize it and the screen is frozen on the plug into iTunes message
iOS: Unable to update or restore
-
my ipod has "ipod is disabled connect ti itunes" but it will not let me put in the passcod or anything! i cant get off this display?
You have to restore:
Forgotten Passcode or device disabled after entering wrong passcode -
Anyone any ideas, I have just purchased 3 tunes from itunes, but they will not sync with my ipod.
https://discussions.apple.com/message/23071575#23071575
-
When I turn on the iPod touch, I get the screen that has a picture showing that I should plug it into iTunes, but when I do, I get a message that says I need a passcode. I downloaded the latest version of iTunes and ran a diagnostic test to see if there were any problems and it said that iTunesHelper is currently not running. Everything else was working just fine. I don't know how to make sure iTunesHelper.exe is running. Also, the volume was not working properly before this happened. I'm not sure if that is related to the issue. Any suggestions?
You'll need to connect in recovery mode to get past the passcode and restore the ipod. After that you can set up a passcode you choose. Log into the ipod after that with the new passcode and deactivate the passcode in the Settings of your device. iPhone and iPod touch: Unable to restore and iPhone and iPod touch: Wrong passcode results in red disabled screen
Message was edited by: Ingo2711 -
I have a disc an a cord comming up on my screen will not do anything else whats up with it
I have a disc and a cord on my ipod screen an will not do anything ?
1) Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
2) If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Maybe you are looking for
-
How come Power Nap doesn't work on late 2011 MacBook Pros?
I have a late MacBook Pro, recently bought Mountian Lion hoping I would get Power Nap, but unfortunatly not, could someone be able to explain why Power Nap is only for MacBook Pro Retina and MacBook Air please? Much appreciated.
-
I am trying to connect my I phone to my I pad so I can import pictures from one to the other but neither one seems to react to this connection. How should I proceed?
-
How can use java emulate ping function?
When I type ping xxx.x.xx.x,it would send a icmp package. If the remote mechine has no echo,it would wait too long. So Making a runtime process to invoke ping command directly is not efficient. My single aim is showing the remote mechine exiting or n
-
HI I want that in my dynpro application at run time user can not change settings for this purpose i have set a personalization parameter WDDISABLEUSERPERSONALIZATION = X like that. it is working fine in dev and QA but not working in PRD Kindly help
-
Is my images hardware accelerated???
hello guys, i'm testing my game engine currently in my p4 1.7ghz, unknown s*ck gfx card i got only 40 fps for displaying 900 sprites (32x32) in windowed mode using bufferstrategy and my question is: is my images hardware accelerated? why i got only 4