My ipod touch is stuck on itunes
My ipod touck 1st gen is stuck on itunes.
What do you mean?
If it show the iTunes logo and an USB plug you need to connect the iPod to your computer and restore via iTunes.
iTunes: Backing up, updating, and restoring iOS software
Otherwise, please provide additional information.
Similar Messages
-
My iPod touch is stuck on iTunes logo and USB cord image.
I just bought a brand new iPod touch two days ago. So I am new at this, I plug the USB into my iPod touch last night to buy and download music and apps from iTunes; it worked just fine. Today, I go to charge my iPod into my computer and put some more music on it. Then, iTunes pops up a warning sign of some sort and says I needed to upgrade my iTunes, I clicked okay while my iPod touch was still plugged in my computer. In the middle of its process, another warning sign pops up and says I needed to cancel the process immedently. So, I did; and now my iPod is telling me to connect my USB to iTunes. And it's stuck on that screen; and my iPod won't show up on my computer nor iTunes, but it makes the "ding" noise when i replug my USB into my iPod.
I tried Apples support searches, and going to Youtube to search how to fix it, but non have both problems at the same time.
PLEASE SOMEONE HELP, I'M DYING TO SAVE MY NEW iPOD!
Thank you,
Sincerely, AdelinaFirst and foremost...
Are you absolutely certain that you're using a USB port that does, in fact, provide power to the iPod? If there is the slightest doubt, use an Apple wall-mount charger if you have one. If you don't have one, use a USB port directly on the CPU. Do NOT use a port on a hub. Do NOT use a port on the keyboard (which is really a hub). Charge the unit preferably overnight but a full hour as an absolute minimum.
If you're still having a problem after doing the above, try this.
http://support.apple.com/kb/TS1369
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again. -
4th gen ipod touch stuck on itunes plug in screen and don't have computer i setup with
Hey 34grumpy4u,
Thanks for the question. I understand that your iPod touch is currently in recovery mode, and needs to be restored. You can restore your iPod with any computer, then transfer your information back to your iPod once you have access to your backup (whether it was made via iCloud or iTunes).
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Thanks,
Matt M. -
my iPod touch is stuck in restore, if i rebute iTunes will it delete all my stuff on iTunes?
WELL U SHOULD CHECK UR ACCOUNT PURCHASE IT GOAS UP TO TO 2 COMPUTERS AND IF THAT DOESN'T WORK U SHOULD CALL UP APPLE {THEY COULD HELP U } P.S DON'T EVER PULL OUT UR PLUG WHILE UPDATING UR IPOD IT WILL SCREW U IT HAPPENED TO ME RECENTLY
-
ok - my ipod touch is stuck on the itunes screen. Have tried shutting it off, plugging it into my windows computer, and it does recognize that it's there. it goes to restore mode, then immediately goes to restore and update. then back to restore mode, then an error message. don't know where to go from here, any suggestions?
Try here:
iOS: Not responding or does not turn on
iPod touch: Hardware troubleshooting -
My ipod touch is stuck on a screen that show a picture of the USB cable with an arrow to a picture of a CD with a music note over it. I have reset and turned on and off.....what do I do??
Connect it to iTunes and restore it.
B-rock -
my ipod touch is stuck on the restore picture and when i try and sync it to itunes i cant sync to itunes because i have a password on my ipod touch and i cant get to the main screen so how do i reset my ipod ?
Connecting in recovery mode will help: http://support.apple.com/kb/HT1808
-
My ipod touch is stuck on the connevt to itunes screen! Wont go away!
My ipod touch is stuck on the connect to itunes screen. It will not go away, no matter what I do. I have tried to restart it, but the screen comes back. I don'tknow what to do please help!
You need to connect it to iTunes and restore it. If necessary, manually place the iPod in recovery mode first using the instructions in this Apple support document
iOS: Unable to update or restore
B-rock -
My iPod touch is stuck in recovery mode, but when I connect it to my computer to restore it, my computer does not recognize it. It does not appear as a device in my iTunes. What can I do to restore it/make my computer recognize it?
DId it successfully connect to this computer before?
Try:
iOS: Device not recognized in iTunes for Windows
or
V
Also try placing the iPod in DFU mode and then try restoring
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X -
My ipod touch is stuck up at Apple Logo, I have tried to update and restore through ITunes but no use, It stuck up again at Apple Logo with no Error, after restoring ITunes showes your ipod is restore but still apple logo won't go, Due to new Laptop, I do not have any backup, therefore i have tried to select new Ipod touch and goes through step by step procedure but no use, Please help what to do?
i tried reseting my ipod today and had a similar problem... it wont be recognized by itunes, the only thing i havent tried is putting it into DFU mode, or the state that it is in when u recieve it telling u to connect it to itunes.i recommend putting it into DFU mode. http://www.youtube.com/watch?v=34v8HMC9B98 this should better explain it. if i find another way, ill keep u updated
-
My iPod touch is stuck on apple logo and isn't recognized by iTunes
My iPod touch gets stuck on the apple logo and won't let me get to the home screen. I tried plugging it into iTunes but It was not recognized. When I hold the power button down it tells me to charge it. When I do it gets stuck on the apple logo again. Please help!
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
whenever i connect my ipod touch 3rd gen to itunes itunes responds really slowly and when i try and sync it it says sync in progress on my ipod screen but then is stuck with "verifying "matts ipod" at the top of itunes and stays like that for ages.. help
You buy one and only one download.
As it should have been transferred to your computer when you synced, you can contact itunes support and ask for an exception.
http://www.apple.com/support/itunes -
TS1368 ipod touch 4g stuck on loading scene and doesnt connect to itunes
ipod touch 4g stuck on loading scene and doesnt connect to itunes
Start here:
iOS: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
Then try a restore.
You may also have to place the iPod in Recovery mode or DFU mode to allow a restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Did you install any phone software? You may want to uninstall any. -
My iPod touch is stuck in recovery mode and my lock button is broken what do I do
My iPod touch is stuck in recovery mode and my lock button is broken what do I do?
What happens when you connect to computer and restore via iTunes?
iTunes: Restoring iOS software
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My iPod Touch is stuck in DFU Mode
Hi,
My Third Generation iPod Touch is stuck in DFU Mode (Completely Black Screen) and I cannot exit it as I have a broken Sleep/Wake button on the iPod. Even worse, iTunes will not see the device so I can restore it.
The only thing that I can think of is to wait until it's battery has completely drained and then restore it.
Please help me!Try placing the iPod in recovery mode using one of these programs and then restoring:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
Maybe you are looking for
-
How can I give songs on one album different illustrations.
Pete Philly, a Dutch singer, did a project, called "Open Loops". He uploaded a number of songs that didn't really fit in his new album, to be downloaded for free. I downloaded it, and it turns out that every song has its own illustration. I was curio
-
hey, alv grid method for export data from alv grid to itab. regards, purna
-
HCM Processes & Forms: Field not updating after Drop Down list selection
Hello all, I am having a problem that I think happens a lot, but I can't solve it through all the examples given here. I have a Drop Down List where I change the value. On the CHANGE event, I have: xfa.record.CONTROL_PARAM.ISR_EVENT.value = "GET_ORGI
-
Hi all, can you tell me what is shared objects and how it is used in abap objects, if possible explain with some examples. Thanks Sathish
-
HR ACTION- BDC should update both 0000 and 0001 or should not commit at al
Hi, I have a requirement in which a action is to be performed. Action could be terminate, hire, or anything. Consider HIRE action, in hire action info type 0000 and 0001 should be updated. I have recorded to save info type 0000 first and then 0001 as