My ipod touch is stuck on the apple logo. i restored and updated it with itunes and now it wont get off the apple logo. what does this mean and what do i need to do?
i was trying to delete some songs from my ipod. so i plugged it into itunes and it froze. i help the home and menu button to reset it and now its stuck on the apple logo. i plugged it back into itunes, it updated the software i dont know if it restored the ipod. but now its stuck on the logo and it keeps going to the white screen and then back to the logo. what do i do?
Try restoring. Make sure you have a backup first.
Similar Messages
-
When I plug my ipod touch into the pc, it tells me:the ipod cannot be used because the apple mobile device service is not started. What does this mean and how do I get rid of that and enable syncing?
Hello Julia,
Start with this article.
http://support.apple.com/kb/ts1567
B-rock -
I plugged my 4th generation iPod touch into my computer and when iTunes popped up, there was a notice that read, "The iPod cannot be used because the Apple Mobile Device is not started". What does this mean and what do I do?
Type "Apple Mobile Device Service" into the search bar at the top of the page by Support and read the help article.
-
When I plug my iPod in my computer, "This iPod cannot be used because the Apple Mobile Device is not started" message pops up. What does this mean and how can I fix it?
Hello di_gitrdone,
Start with this article describing how to restart this service.
http://support.apple.com/kb/ts1567
B-rock -
when connecting my iphone 4 to itunes for the first time i get the following message "cannot connect to this device because Apple Mobile Service is not started" what does this mean and how do I solve it?
I'd start with the following document with that one:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows -
i have a screen with the apple logo on it and a bar underneath it. it has been this way for about an hour now. what does this mean and is there a way to reset the iphone without going into the store? it isnt showing in my computer or on the itunes page.
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
When I try to sync my iPhone 4S with my computer, I get this message: "This iPhone cannot be used because the Apple mobile device service is not started" What does this mean, and how can I fix it?
means that apple mobile device service needs to be started try this article to get it turned back on
Restart apple mobile device service -
i downloaded the latest itunes and i recieved a message that the apple mobile device failed to start. It asks me to verify that I have sufficient privileges to start system services. What does this mean and how do I fix this so computer will sync iphone?
You need to follow the instructions of tt2 in https://discussions.apple.com/thread/5822086 to straighten it out.
-
my ipod touch 2nd generation wont connect to itunes. my computer says it is connected, but has no drivers. what does this mean and how do i fix it?
Start here. See the driver topic first.
iOS: Device not recognized in iTunes for Windows -
My iPod doesn't sync it keeps coming up with the message "The iPod 'iPod Nano' cannot be synced. An unknown error occurred (13019)." What does this mean and how can I fix it?
I am getting the same error message. Have you figured it out?
-
Hi what does this mean and what do I need to do?....You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms.
well not sure of what the problem is besides you running an operating system that adobe cannot work with. reply with that type info ie I am running windows xp home or OSX version 7.5.3 etc. Meanwhile here is the link for minimum system requirement for adobe's creative cloud products System requirements | Creative Cloud that should help. good day
-
My HP 3054 printer/scanner worked very well for my needs, but today I tried to scan something and I get this message:(com.apple.ImageCaptureCore error -9922.) What does this mean and what can I do to get my scanner to work again?
i have this too on my hp photosmart b210
no one seems to know how to fix it!! -
My Iphone 4s is plugged in charging after it has fully died. Instead of the apple appearing and staying constant on the screen...the apple is blinking. What does this mean and how do I get the phone to charge/turn back on.
- Try:
iOS: Not responding or does not turn on
- Next try letting the battery fully drain. After charging for a least an hour try again
- Last, make an appointment at the Genius Bar of an Apple store, it appears you have a hardware problem. -
What does this mean and how do i fix this so my ipod works again on my computer and itunes: "Service 'apple mobile device' failed to start. Verify that you have sufficient privileges to start system services." I tried "retry", i tried "abort" and started over. I keep getting stuck in the same place.
Hello DEstadt,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Best of luck,
Mario -
In place of the percentage number next to my battery icon, it now says "single percent format." What does this mean and what do i do about it?
You can use a keyboard command to prevent your iPod auto-syncing with iTunes. While connecting the iPod to the computer on a Mac hold down the Option and Command (⌥ and ⌘ Apple) keys together. This will stop the iPod from auto-syncing with iTunes and it will appear in the source list. Wait until you are sure the iPod has mounted, and that it will not auto sync and then you can let the keys go. This may take between 20 to 30 seconds depending on your computer. Once you are safely connected go to the iPod Summary tab and make sure "manually manage music and videos" is checked:
iTunes for Mac - Keyboard Shortcuts
Managing content manually on iPod and iPhone -
i just got my mac book pro and i am trying to log into my app store and iTunes and i try to log in and it keeps saying you need to review your account what does this mean and what should i do
Please provide the full text of the message and describe at which point in the login progress it is displayed.
In the meantime, make sure you're logging in with the same Apple ID and that the new computer is authorized with that iTunes account.
Maybe you are looking for
-
[iPhone] How to change Portrait / Landscape mode.
I am tring to change view mode between portrait and landscape mode. UIViewController has two UIViewes and I want them to be shown as a landscape mode. I found the property of interfaceOrientation in UIViewcontroller. but it is readonly. Is there a wa
-
Looking for driver of Model CT4
i am looking for the driver for creatives sound blaster model CT4730.can anyone hlep me finding the driver for the card.
-
Hi All, I have created resource using /SAPAPO/RES01 using copy resournce how to assign the model to the resource creted. Thanks, Yogi
-
I know... Many people have posted these questions over and over again, but i'm a relatively new iWeb user. Most of all it's because i can't get the **** page to work. Is it possible to make such a page? -nfxnru
-
A problem was encountered while trying to send information over the Internet.
I have CS3 - Design Premium. I had it installed on my old computer which crashed and was reformatted. I have a new computer now and am trying to install it again but I am getting an error that says: Registration Unscuccessful A Problem was encountere