My iPod touch isn't being recognized by my pc. The lock button on it won't work due to water damage, and a friend of mine fixed the problem by restoring it on his computer. How do I restore it without the lock button?
My iPod touch isn't being recognized by my pc. The lock button on it won't work due to water damage, and a friend of mine fixed the problem by restoring it on his computer. How do I restore it without the lock button?
first try:
iOS: Device not recognized in iTunes for Windows
next
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Similar Messages
-
My ipod touch isn't being recognized by itunes ?
So my ipod wasn't being recognized by itunes so i sent it away to apple to be fixed and they sent me a brand new one but this one isn't being recognized by itunes eitheir? I've uninstalled and re-installed itunes plenty of times, my lead is perfect and its really annoying me i have no music or anything on it? Help please:o
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem -
This happened after trying to "restore"
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My ipod touch isn't being recognized by iTunes or my computer. It's in "ipod recovery mode"?
My ipod touch 5th generation is not being recognized by my computer under devices or in itunes; however, when I click on devices and printers it comes up under "unspecified" and is labeled as "Apple mobile device usb driver." I right clicked the icon and hit troubleshooter and it opened itunes and told me I should restore and update my ipod. I did this twice and nothing has changed, it is still not being recognized. This is a big problem because the only thing that will pop up on the screen of my ipod is the symbol for the usb plug with an arrow pointing to the itunes symbol (meaning plug into itunes I assume). I have tried restarting my ipod and restarting my computer and nothing is working. I have the most recent version of itunes. How do I fix this?
first try:
iOS: Device not recognized in iTunes for Windows
next
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
My iPod touch isn't being recognized by iTunes but my computer recognized it.
It recognized before but isn't working now. I tried all the troubleshooting and nothing is helping. What can I do?
My iPod is an iPod touch 5th gen and I have the latest version of iTunes on my computer. Help me please!Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My ipod touch isn't being recognized by my windows8 computer... HELP!!!!!
***???? Why doesn't my Windows8 Computer recognize my ipod?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My 5gen iPod touch isn't being recognized by iTunes.
I've followed the Apple support to try in fix it and nothing is working. I also tried it with my iPod Nano and got a message about it being detected but not being ID'ed properly.
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Featurs appin the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
- Try on another computer to help determine if computer or iPod problem -
My 4th generation ipod touch is not being recognized on my computer ?
My 4th generation ipod touch is not being recognized on my computer what do i do ?
iOS: Device not recognized in iTunes for Mac OS X
or
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
- Try on another computer to help determine if computer or iPod problem -
HT1335 My Ipod touch is not being recognized on my PC as a usb device.
My Ipod touch is not being recognized on my PC as a usb device.
Hey MOIMC,
Sorry to hear your computer isn't recognizing your iPod Touch when you plug it in. I was able to find two articles that might help you out:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
and
iPod not recognized when connected to Windows laptop over USB
http://support.apple.com/kb/TS1401
Hope this helps,
David -
Since installing the latest itunes to windows 8 my iphone and ipod touch is not being recognized in itunes, therefore i can't change playlists or add songs etc. Is this a fault with itunes as it was fine with the older version or is there something i can do. I'm not on IOS yet but would like to backup my phone first but can't do that atm due to not being able to view my phone on itunes!
ThanksHi, jodie_0182.
I would recommend the steps in the article below. See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If the above step does not resolve the issue, try all remaining steps in the article.
Cheers,
Jason H. -
My Ipod touch isn't being recognizd in iTunes or in my computer.
I need help badly lol. Ok as in the title my ipod isn't being recognized by iTunes or windows. Also it doesnt come on unless plugged into my computer or some power source. But when it does come on all it shows is a USB cord with an arrow pointing to the words iTunes. I don't know what to do, I've searched for about 5-6 hours trying to fix this blasted thing and no solution works yet. I've done the reset, uninstall reinstall itunes, restart my computer, uninstall the drivers from device manager and reinstall them after a computer restart. Absolutely nothing works, is it time i chunk the thing in the garbage or what?
first try:
iOS: Device not recognized in iTunes for Windows
next
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
My second Generation ipod touch is not being recognized by the computer and is not charging.
I plug it in but it wont charge and windows says the device has malfunctioned. help please.
Try the following and then try a restore:
- A reset.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Placing the iPod in recovery mode. See:
iPhone and iPod touch: Unable to update or restore
- Placing in DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
Brand new iPod Touch is not being recognized by my computer
Hello,
I just bought a brand new iPod Touch. I had iTunes installed since this is a replacement to a very old iPod. When I plugged my new iPod Touch to start the very first sync, iTunes crashed and started giving me a Windows 7 error (999). After many frustrated attempts to reinstall iTunes (and a few blue screens in between), I followed a recommendation in one of the postings to delete all the Apple programs in a certain order. It worked and I was able to reinstall iTunes. The problem now? My USB, which at one point kept asking for the software to install the iPod, won´t recognized it anymore. Period. I´ve rebooted several times and whenever I plug my iPod in any of the four USB ports, absoluletely nothing happens, as if nothing had ever been plugged in. I tested the USB with my blackberry and it recognized it. Please help!! Thanks!Ok, I just figured out so I´ll post it here in case someone has the same issue. I turned off my iPod while connected to the computer. Afterwards, the "other" connection showed up again in the device manager but this time it stayed there without disappearing and with the exclamation point on. I then proceed with one of the instructions in this posting to install the driver for the apple mobile which then showed up in the USB section of the hardware (it was never there until now). Bingo! I got my iPod Touch to connect for the first time! But seriously, why should it be so hard???? I'm concerned with the number of postings here. It looks as if Apple is selling the hottest toys but not be the best ones in terms of quality...
-
Hi... I really need some help from you guys. My ipod touch is not responding whenever I connect it to my PC. It gives no feedback. The battery image that is shown when I charge my ipod touch doesn't show up unlike if I charge it using the wall charger. I have used different kinds of ports and I ended up with similar things. No response! . However, I can still use my ipod and play music with it. The only problem is its syncing ability is gone. I have only used it for a year now and the warranty that came with it is expired. I hope I can get a good answer from you guys. ThanKs!!!
I am afraid that the solution did not work... the ipod touch of mine seems really not functioning. It receives an electric isgnal from the computer but it doesnt sync at all... Whenever I put my ipod touch off and plug it to my computer it turns on but it doesnt sync... .. Moreover, I have used different PCs so as to try it syncing.. I have used mac book pro and windows 7 laptops but it gives similar feedback, which is NO FEEDBACK at all...
-
My new 4th gen. iPod touch is not being recognized by my PC
When I plug in my new 4th gen iPod touch, the computer just says that it is a USB device that is not recognized, what can I do? My operating system is Windos Vista.
Does the iPod work OK?
Have you tied resetting the iPod? Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
Next would be to place the iPod in recovery mode and then restore via iTunes. If iTunes does not see the iPod then the iPod is not usable. For recovery mode:
iPhone and iPod touch: Unable to update or restore
Maybe you are looking for
-
I tunes and comp not reading my ipod
All of a sudden my ipod is not being read by comp or i tunes. Dont think its my drive cause it reads hubbys ipod. Ipod charges but doesnt show up. what do i do. Thanks Cin
-
Problem while populating RFC table into HTMLB tableView control
Hi, We are trying to populate some data from R/3 into the front end. For this we are using tableView control in HTMLB. But the problem is, one particular field is behaving strangely where as all other fields are displayed correctly. This value is som
-
LiveCycle Designer - Vector + Text + XML
Hallo Community. Normalerweise stelle ich mich erst einmal vor. Heute jedoch, eilt es sehr und darum verkürze ich es mal. Einleitung: Ich möchte in Adobe LiveCycle Designer ES 8.2 einen Fragebogen erstellen, der mir dann via klick auf einen Button al
-
Hi! I hope someone can help me with this. I have done a program in Java-code and now I want to convert that code into an executable file that can be run on most computers. I have tried to convert the code to a JAR-file and then, using the program JSm
-
An Apple ID blocks my Apple ID
Many years ago I made an Apple ID with my current e-mail. When I needed it again I could not get the password. I made a new Apple ID which I use now with the e-mail at work. This works fine, except that my e-mail at home is blocked from my new Apple