My ipod touch was trying to update and is now broken how do i fix it
My ipod touch was trying to update but wouldnt finish so i tryed restarting it, it is now frozen on a white screen, wont restart properly, and itunes wont read it. How do i fix it and whats wrong with it??
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
My Ipod touch was in an update and froze. It shows a blank screen and sometimes shows an apple. Now it will not restore. What do I do?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
Ipod touch 3gen failed to update and will no longer work
my ipod touch 3g tried to update but i failed and now my computer dosent reconize the ipod and the screen will not change
how can i fix it?
-
my ipod touch was submerged in water and now it is telling me to connect to itunes, but itunes won't connect until i put in the passcode, and i can't do anything to my ipod until it connects to itunes. so, basically i can't do anything from the ipod or to it from the computor. what should i do?
Restore...
From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.
There's more to try but let's go a bit at a time. -
hi. my ipod touch i guess finished updating. and now when it trys to turn on, a blue screen comes up and then the blue screen changes to a white one. and i cant do anything to it. also it own connect to itunes. help pls
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Some other users have had the same problem -
My daughters ipod touch was reset by accident and I don't think it was ever plugged into a computer. Is there a way to restore all the games she purchased on it?
Restore from iCloud backup if shed has one.
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
I was trying to update my imac now i can't do anything
i was trying to update my imac now i can't do anything
If you'll look at the little toolbar above the reply window, you will see an 'A' to the left of the little smiley face. So, if you want to post a link to another site or thread here, first copy that URL (have your cursor in the address bar of that site and hit Command + C to copy. Then come back to your reply window, click on the A and you'll get a window in which you can simply hit Command + V (pasting the URL there) - hit insert and you'll see this:
https://discussions.apple.com/thread/4139771?start=75&tstart=0 -
I was trying to update my phone now is asking me to restore my phone, can I have some help please?
https://discussions.apple.com/message/18750831#18750831
-
My iPod Touch was disabled due to incorrect password entries. How do I unlock it?
Hi there EllaBella0,
You may find the information in the article below helpful.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
-Griff W. -
I was trying to restore and update my phone and my itunes in the lappy.it says we're sorry.ur phone can't be restore right now
That message usually indicates that your phone was hacked or jailbroken to unlock it.
Then when you updated your phone it locked back up to the original carrier. -
I was trying to sync and update my phone with ITunes, about 5 minutes into the process everything stopped. Now the phone does not work, it will not turn on or off, the screen of the phone shows the Apple Logo and a straight line. ITunes seems to not "see" the phone. Suggestions??
http://support.apple.com/kb/HT3965
-
I was trying to updat my software and now my iphone is frozen. I tried to turn it off but I dont think it turned off. Please Help!!!
Connect in recovery mode and restore, as described in this article:
If you can't update or restore your iOS device -
Sooooooo sick of trying to fix the bug with the newest version of itunes and Windows 7. I'm over it. Tried syncing ipod to hubby's laptop. When update and sync was complete, all my apps, music, and pictures were gone. When I open my itunes account on his computer, they are gone from there as well. I cannot open itunes on my computer because I cannot fix the compatability issue. Don't tell me how to go to 'computer', click 'program files' etc. etc...... Did that, unchecked compatability mode and nothing is fixed. About to take a hammer to darned thing.
Also, I have forgotten the password to my backup file, which could solve everthing. I don't really remember ever setting a password for the backup file. Tried every password I've ever used with this device.
-
how do i sync it with the compter without deleting all data?
The first thing you can do is transfer your iTunes purchases from your iPod Touch to your PC. To do this, choose File -> Transfer Purchases in iTunes. You should authorize your new PC before doing this by clicking the Store drop down menu and selecting Authorize this Computer. Then enter in your Apple ID/iTunes Store account credentials.
For all other content that was not purchased from the iTunes store, see this older post from another forum member Zevoneer covering the different software available to assist you with this task.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
Finally, right->click on your iPod Touch under the Devices section in iTunes, and choose Backup. Then after erasing and syncing your iPod, restore from that back up. Or better yet, copy a backup from your old PC to your new one if at all possible. Here is more information on backing up and restoring your iPod . Doing so will restore all of your App data.
http://support.apple.com/kb/ht1414
B-rock -
what does error (1) mean... not able to restore iPod touch... please help
Usually indicates a hardware failure. Try restoring again, on a different computer if you can. And use Recovery Mode: http://support.apple.com/kb/HT1808. If that fails then it is nearly certainly a hardware issue as I said.
Maybe you are looking for
-
Just installed itunes on windows 8 and can't open it
Have purchased a new computer with Windows 8. Have just installed itunes on it and now it will not let me open it!! Please help
-
I created a SSIS package that litterally just export a view onto a server. The database, ssis and location are all on the same server. When I run the SSIS package in SSIS works perfectly. When I run it in SQL it doesnt work. I have read way to many a
-
How can I know the encoding format for a file.
I have files encoded in English, Spanish, Japanese etc. I want to know which file has which encoding format while reading. Can anyone suggest. Ashish
-
Hi , When i am doing MRP run, purchase request are not created.
-
Hi all, i'm using the UDP protocol to exchange information between a PC and a cRIO; the first is the master, the second is the slave. In the cRIO i developed a piece of code in order to realize a loopback, so that the message sent from the PC is sent