My iPod touch went into a green screen when I was upgrade the software it's in iPod 4th generation I tried restoring it did not work
My iPod touch 4th generation went to a green screen when I was upgrading the software I tried to reset the Green screen came back I tried to restore nothing
This has workd for others:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
my ipod touch 2g is on black screen.when i connect it to my pc it is not recognizing it.then i opened i tunes and put the phone in dfu mode it says an ipod is detected but it cannot be restored error 1600.plz help me...
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software. -
Got a black screen on the iPod Touch 4th Generation. Tried restoring it and holding the lock and hold buttons but this didnt work. Do i need a brand new screen?
If you successfully restored to factory settings/new iPod via iTunes (Not via Settings>General>Reset>Erase all Content and Setting) and still have the problem that indicates a hardware problem. Could be the screen or something else.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar -
My ipod comes up with a green screen when i turn it on. I did once eject it safely like a flash drive instead of through itunes. What exactly is wrong with it and can it be fixed?
What exactly is wrong with it and can it be fixed?
If you have AppleCare and/or iPod Nano is still under warranty, give them a call. If not, take the computer to your local Apple Store or AASP. The staff will tell you what is wrong w/it and let you know if it can be fixed after it is examined. -
I've followed all the instructions in order to restore my ipod touch yet it won't even turn off or show the red slipper to shut down. I've tried holding down both buttons each at a time it doesn't do anything. Anybody ever experience this? If so help? Should I just go to the apple store?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Hello. I am owner of an iPod Touch 5gen. I have an error "iTunes was unable to load provider data from sync services". I tried: All Apple's tutorials including reseting sync data, reinstalling and deleting all of iTunes components including deleting it from system registry. My system is Windows 7 64bit.
UPDATE: The true error is : '
"itunes was unable to load data class information from sync services"
Any of the topics didnt work.
Sync on my wife's laptop works. -
when i go in my settings on my ipod touch 3gen it says no wi-fi as in i cant connect to any wi-fi at all i tried to restore but did not work HELP PLEASE
See:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar -
Ipod Touch can't find Bluetooth device. (Jam Box)
Upgraded Itunes software did a backup and restore on the Ipod.
My PC sees Jam Box fine. IPod used to work with JamBox. Reset Jambox, no luck.
Followed every instruction from the forums. Still no luck.
Reset Jam Box to factory settings.Did a network reset on the Ipod after the backup and restore. No luck
-
What can i do to get my phone working. It went to a black screen when I was playing a game. I pressed the power and home button then it showed the apple logo and went back to a black screen. Doesn't came on, show a charging sign, read on iTunes.
Press and hold the home and power buttons for 15-20 seconds until the white Apple logo appears.
-
HT201263 while of restore mode, my ipod touch went back to disabled screen..
im restoring a disabled ipod touch....suddenly, from restore screen it went back to disable screen... what must i do?
- Try placing the iPod in Recovery mode and then restore.
- Next try DFU mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
I was updating my ipod touch to iso 6.1 (i think) and when my ipod restarted after the update it froze on the loading bar so i held the lock and home buttons down to restart my ipod it showed the apple logo for a few seconds then the screen went random colours. I tried to let the battery drain then plug it into the computer but it doesen't recognize it when i connect it.
Please help!!!Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
i have an i pod touch with ios 4.3.3 i need to upate the software but i have alot of puchased music and stuff that i need .. is it possible to inport this purchased music to your i pod libary
Use the Transfer Purchases function in the File menu. If you're on Windows, press the Alt and F keys.
(75943) -
My ipod touch went into Recovery Mode, How do i fix it without recovering(deleting)?
Earlier this week, i was on my laptop when i decided to look at my ipod touch with was next to me, about 10 mintues later. I tried turning on, and the ipod was stuck on the connect to itunes screen, and i was wondering why it was doing that. I plugged it into my computer and it said " Itunes has detected an ipod in recovery mode. You must restore this ipod before it can be used with itunes". Restoring was going to delete everything! I already lost my infomation last year to a similar problem. I tried holding the power and menu button for 10-15 sec and then just hold menu 2 secs, it didnt work. I know most people are going to say use a backup, but i havdn't been albe to back up for about 70 weeks. I know i can get back music, but i have a bunch of apps that have memory and pictures and songs, that i'll never get back,like last time. I don't want to lose important docunments again either! Please Help!! ps. I dont remeber my oss or what version it is(like itouch 3 or 4s)
If this program will not get the iPod out of recovery mode you will have to restore the iPod and thus lose everything.
RecBoot: Easy Way to Put iPhone into Recovery Mode -
After updating to itunes 10.4 restarted my pc windows 7 64 bit, my ipod touch 3rd gen went into restore mode,when trying to restore it works for several minutes then says it cannot be restored, unexpected error occured (1604) I have followed the reslution checklists, still wont work, any thoughts?
Hi
Cannot offer any thoughts other then i am having the same problem. updated my itunes windows7 32bit ipod touch 4th gen. went into restore mode lost over 700 songs. i dont get any error messages i just cannot get into itunes store. Firewall is allowing access, etc resolution checklists done, and nothing.
Hopefully this issue is fixed up soon... -
My sons ipod touch has frozen on a black screen with a waiting symbol rotating on it. We cant get it to turn on or off. When I tried to attach it to his itunes page we got the message "Cannot connect ipod error code OXE8000065". When I try to dio a search for the problem I keep getting told to resynch it but I cant!! Is this a common problem or do I need to send ipod back he has only had it 10 months
Did yu try here:
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting
Maybe you are looking for
-
Can't change the background of table cells on a page with CSS
New CSS guy here, so excuse me if I sound stupid! I built up a site with DW8 using CSS for basic page formatting. The site is a new version of an old one I did in GoLive. I copied/pasted a fairly large table onto the new site in DW, and the table cam
-
Item outside the memory bounds
Hello I built a COBOL service that calls COBOL programs contained into a DLL file. From time to time an error is recorded into the 'stderr' file: Execution error : file 'MQN_SECMQNTESTORCL' error code: 114, pc=0, call=1, seg=0 114 Attempt to access i
-
Fading garbage mask with scrolling text
Hello, I have some scrolling text which I have added a 4 point garbage mask to, I want the text to fade at the top of the screen where it disappears, instead of how it disappears now, it goes from totally visable to 100% gone, and looks unprofessiona
-
Hi, I have WinPE boot image and added support for Powershell (all required packages). Now in WinPE, I cant access the NetAdapter module (infact its not available in winpe). The version on PS is 4.0 , any thoughts? N.A.Malik
-
Trying toi nstall itunes 10.6. Freezes on Publishing Product Information. Using windows 7 64 bits