My ipod was frozen while opening an app and it is still frozen. The volume button and time is working fine but it wont even lock or turn off. Not even close the app. What should I do?
I was trying to open facebook and it just stopped without anything really on the screen, the time is working and I can change the volume, but my friend tried to send me a message on another app and it didn't notify me or anything. I bought it used and I don't have a warrenty. Help?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
Thenb the remaining items of
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
I just replaced my iPod 5th gen. a week ago, and it was working fine, but when I went to go turn the screen on, it wouldn't turn on. I've tried to put it on the charger and it wouldn't charge and it wont connect to my computer, how do i fix this? I tried to reset the iPod, by pressing the home and power button but nothing works. It's literally a brand new iPod, I dont know what to do now. Help?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Had my Nikon D600 recently in for the updated service call. Camera works fine but Photoshop says it cannot open my RAW (NEF) files now? It worked fine before and I have done all my updates.
The only thing I can think of is if you got a replacement D610 as rumored here:
http://nikonrumors.com/2014/01/27/nikon-is-replacing-some-d600-cameras-with-new-d610-model s.aspx/
In that case, you would need the new version of Camera RAW or DNG converter as per Camera Raw plug-in | Supported cameras .
The other thing to check is if the files open in the Nikon native ViewNX software. If they don't it's time to call the service center. -
I have iphone 4s 32GB ,the volume of the ringer and alerts can't be adjusted using the volume buttons and lock sounds and keyboard clicks available, but all not appear ??!!!!!!!
Hi nitramred,
To start troubleshooting this issue where you are unable to adjust the volume after receiving a call, please go ahead and first force close all of the apps currently running on the device, and then reset it by following the steps in the articles below.
iOS: Force an app to close
Turn your iOS device off and on (restart) and reset
Take care,
Alex H. -
I have an iPhone 6. For the first two weeks my bluetooth worked fine but then started having issues. Now, although it shows that it is connected to Bluetooth, I can't hear any of the calls. The radio continues to play. Please help!
Hello there, Srushevics.
It sounds like you may be having issues with the connectivity of your iPhone with the Bluetooth in your vehicle. The following Knowledge Base article offers up some great steps for troubleshooting that Bluetooth connectivity with your iOS device:
If you can’t use a Bluetooth accessory or car kit
To resolve the issue, you'll need to first sign in to iCloud and review your devices:
Sign in to iCloud on your iOS devices and Macs with OS X Yosemite (available this fall).
On one of your devices, tap Settings > Bluetooth and look under My Devices. You'll see all devices that are connected to Bluetooth, but make sure that you see your Apple devices that are signed in to iCloud and are using iOS 8 or OS X Yosemite.
Sign out of your iCloud account from any devices that you don't want to use. To sign out of iCloud on an iOS device, tap Settings > iCloud > Sign Out.
Then, remove any inactive devices from iCloud:
Sign in to iCloud.com.
Select Find My iPhone.
Select any devices that aren't active anymore.
Wait for Find My iPhone to stop trying to find the inactive device.
You should see the option to remove this device from your account. Select it to remove the device.
After following the steps above, restart the device with the issue. Then try to use it with your Bluetooth accessory.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Can you charge a macbook by any other means than the power cord? For example the usb drive? My cord works fine but the outlet on the laptop is not.
The only way to charge a MBP is with a MagSafe power supply (wall or airline) try http://support.apple.com/kb/TS1713
-
i dropped my ipad mini and the left side got dented .. so the volume buttons and the mute is not working anymore .... and when i am playing games the volume automatically goes up... i still have warranty .. so does apple replace a new one?
Steven ~ Welcome to the Support Communities. The following may be useful for next time...
AppleCare+ for iPad extends your coverage to two years from the original purchase date of your iPad and adds up to two incidents of accidental damage coverage, each subject to a $49 service fee. Note: AppleCare+ must be purchased within 30 days of the date you bought your new iPad.
iPad mini cases from Tech21
iPad mini screen protector from Tech21 -
When I double click Home button to change apps quickly, only the four apps that reside on the task bar show. All of my apps would show prior to my reset of the iPad last night (to fix the Home button). Any ideas on how to fix?
My undertanding is that when you double-click the home button, the apps that are shown are those that are currently active. The reason you are not seeing all of them is that not all of them are active. Before you can access an app in the multitask bar, it has to be turned on first. As a test, try accessing the Notes application. Return to the home screen by clicking the Home button ONCE. Once the home screen appears, double click the home button to bring up the multitasking bar. The Notes app should be on the far left.
-
My iPhone 3GS just turned off for no apparent reason. What should I do?
I have an Apple iPhoe 3GS, and I was just chekcing my text message when it suddenly turned off. Can I fix this? I am still covered by the Apple 1 year warranty.
Thank you (:Having the same problem but unfortunately not covered
Noting i have updates to latest os software 4.3.5 in Aug 5th but it happened to me again?
is it battery problem? Shall i send it for service and maintenance??
Thanks -
Mac seems to turn off whenever I close the lid
Whenever I close the lid, my mac seems to turn off. Once I open it the screen will be a greyish hue (you can still see the windows and desktop) but there is a loading bar with a number of small vertical bars. This happens whenever I close the lid leave it for a while (1 - 2 minutes). What is this and how do I fix it?
Does it really and truly turn off? Cause if you get a grayed out screen and a progress bar, that normally means the Mac coming out of hibernation and should be up and running as soon as the progress bar finishes. As for why it doesn't sleep, no clue unless you or somebody changed the configuration.
The difference? Sleep merely shuts the screen, CPU, GPU and network down, while placing the RAM in a low-power quiesced state; recovery is very fast cause the system merely powers everything back up, validates that the RAM is not corrupted and all is good to go. Hibernation copies the entire content of RAM to disk in a "sleepfile", then turns everything off; recovery entails copying the sleepfile back to RAM, slower than sleep but still much faster than a complete boot. By default, Mac does both, using sleep as the preferred method and hibernation as a fallback measure.
There'a a utility called SmartSleep that allows you to switch one, the other or both. Available for a fee on the App Store, or use the previous perfpane free version from here: http://smartsleep.en.softonic.com/mac -
My iPad mini was working fine then screen black and will not. Respond to any buttons or connect to iTunes
Plug it into the wall charger an wait for at least 30 minutes.
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
My 5Th Gen iPod (video) never hibernates nor turns off, not even manually.
I have a 5th Gen 30GB iPod (video) (2006-May). Last one year I used it without any trouble.
Very recently it started behaving wired. First I noticed this, when I found the battery gets drained out overnight everyday. Then I figured out that my iPod is not hibernating as it used to do, when not used for long. Then I tried to turn it off manually. I pressed and hold the play/pause button for more than 2 min, couple of times (as described in manual to turn off) with no results. I am using latest software both for iPod and iTune, also tried resetting it, wiping out all music and video, but no change in its behavior. My iPod simply refuses to shut down or turn off or hibernate; only when battery gets excused the screen gets blank after draining out all the battery. Apart form that everything works fine, it pays all music and video without any problem after a recharge, of course the charge does not exist more than couple of hours.
Please help if anyone know the reason and/or fix for this problem.
Dell-6000 Windows XP Pro iPod - 5th Gen, 30GB, video, black. Used in Win-XP ProHow to reformat specifically to Windows FAT32? I get only one button "Restore" in the iTunes summery tab when I connect the iPod. After clicking the button it gives me a yes/no option. On yes it goes ahead with the restore operation with progress bar etc.
The problem is, in the connected mode it behaves correctly and turns off momentarily by pressing and holding play/pause button, but comes back with the charging/charged logo. Which is normal. Now at this point if I disconnect, the screen gets white for some time and then turns off.
But when not connected through the USP port (i.e. with the battery only mode) it refuses to turn off, even if I press and hold the play/pause button, also does not hibernate as it used to do previously. -
Why has my iPad screen stopped rotating? I have tried by using the mute button to unlock. It says it is unlocked. But it won't rotate.
1. Make sure the Side Switch is set to Lock Rotation: Settings>General>Use side switch to
http://i1224.photobucket.com/albums/ee374/Diavonex/59baf839.jpg
2. Now check the Side Switch to make sure it's in the unlock position
http://i1224.photobucket.com/albums/ee374/Diavonex/6a787edc3564e00c2ca6b70d4f236 e8b.jpg -
Why does the volume button on iPad stop working
Sound comes on sometimes works fine other times I go to change volume and it won't sound
Is there anything around the volume rocker that might he affecting how it works? Maybe some sticky substance or anything that could be causing the button to stick?
Have you tried resetting the iPad?
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
The new update, IOS 8.0 worked fine, but today it changed why
I updated my iphone 5.S a few days ago, it worked fine, I loved the message changes, where it gave you allot of choices, when you type your words, but today it went away, why, I want it back. how do I get it back.
Hi there Sams Jeep,
It sounds like you may have diabled or hidden the pridictive text. You may find the information in the User Guide below helpful.
Enter text - iPhone
Hide predictive text. Pull down QuickType suggestions. Pull them back up when you want them to reappear.
Turn off predictive text. Touch and hold or , then slide to Predictive.
If you turn off QuickType, iPhone may still correct misspellings and anticipate your next word. Accept a suggestion by entering a space or punctuation, or by tapping return. To reject a suggestion, tap the “x.” If you reject the same suggestion a few times, iPhone stops suggesting it.
-Griff W.
Maybe you are looking for
-
Exporting a Frame yields soft image
I've been using CS4 for about 2 months now. So far I've been happy with it. Can anyone tell me why the resulting exported frame from my Timeline ends up soft or blurry? I've tried following the manual instructions and have tried all the different
-
If a malware warning comes up on a site I reguarly use and subscribe to how can I protect my pc and still access the site or contact the site holder to get the problem rectified? There was a link to google web checker and they said that they hadn't b
-
How to remove page in the workset
Hi all, Currently, I have removed an old page from the workset which has a Delta track to the workset to a Role in the Content Administration tab. However, the role still able to view the old page. How to remove unwanted page in the workset which is
-
How do i read microsoft emails saved from old pc?
My old laptop died and the local computer shop managed to salvage my old emails and files but I dont know how to read them on my lovely new macbook pro. Simple help needed please! Thanks Emma
-
??