My iPod, when connected to my iMac, is invisible.

My iPod icon does not show up on my iMac when connected.  It syncs and charges but I can't eject it.  Anybody have any ideas as to the problem?

What do you see when you click on the Music sub section underneath your device in the left hand of iTunes?  Are the tracks grayed out?  Looking for a bit more detailed information on what you are doing exactly and what you are seeing.
B-rock

Similar Messages

  • How do I set up my iPhone 4s to sync automatically to iTunes when connected to my iMac via USB?

        How do I set up my iPhone 4s to sync automatically to iTunes when connected to my iMac via USB?  Currently it only syncs when I manually click on sync.
        Somehow I do have my 5th gen. iPod set up to sync automatically with the same iTunes / computer.  But I do not actually see a checkbox for either device.
        (yes, the 'prevent devices from automatically syncing' is unchecked)
    thank you!

    Turn off mobile data?
    Talk to your carrier about the usage increase.
    Googling provides many tips- https://www.google.com/search?q=reduce+iPhone+data+usage&ie=utf-8&oe=utf-8

  • TS3716 My relatively new ipod touch 16 gb either does not show up as a drive or everytime says it does not recognize my ipod when connected to add music.  I didn't have problems loading music originally, but this is a new occurrence.  Could you help?

    My relatively new ipod touch 16 gb either does not show up as a drive or everytime says it does not recognize my ipod when connected to add music.  I didn't have problems loading music originally, but this is a new occurrence.  Could you help?

    Hey, Thanks a lot.  It took quite a bit of time to resurrect this ipod.  I tried the upgrade again, but still would not recognize my ipod. So I went to the next step and reset my ipod, wiping of all of the information like it was new.  This helped my laptop see the ipod on itunes, but did not sync. So, I deleted the itunes off my computer completely, restarted and then reinstalled the newest itunes, and then restarted.  Finally, it recognized my ipod and started to download each song.  It took awhile as there was 602 songs, but finally it works.  Yea!!!  I never had any problem with my old nano, but this touch has been another animal for sure. Thank you again and also the community for information.  This was a helpful forum and will recommend to others if they get stuck with their ipod or iphone.  Take care, Karen

  • Why isn't my iPad2 charging its battery when connected with my iMac?

    Why isn't my iPad2 charging its battery when connected with my iMac?

    A lot of computers, especially older ones (I don't know how old yours is), don't provide enough power through their USB ports in order to charge the iPad - it may still be charging, but at a low rate (it may charge quicker if the iPad's screen is off). If you want to charge it at a reasonable rate then the wall charger is better.

  • Since software update, can't see contents of iPod when connected to iTunes

    About 2 days ago, when I connected my iPod to my pc (iTunes), it said there were some software updates for my iPod so I downloaded them and the iPod rebooted itself. Once it came back up, my iPod showed up in iTunes under "devices" on the left hand sidebar. I got the registration page - I usually click register later, but nothing happened this time. It didn't bring me into my iPod. So I tried to Register. I could get so far, then it asked if I wanted some free movie or something, I said NO THANKS, CONTINUE, but nothing happened. I wasn't registered AND I couldn't access my iPod. I can see my iPod under My Computer. I can see "sandra's iPod" uder devices in iTunes. BUT, I can't get to the content when connected to iTunes. All of my stuff is there on the iPod. I can play my iPod when it's not connected to iTunes - but I can't see the content, manipulate playlists, delete songs, etc. when connected to iTunes. I am almost positive this is a result of the latest software updates to the iPod. I have not updated iTunes - I didn't want to and compound the problem. I'm not a techy person - so please be gentle! Thank you. Sandra

    Resolved at home.

  • Why can't I use the Column Browser for my iPod when connected to the computer?

    In iTunes 11, I can use the Column Browser while viewing my music library on the computer.  But it's inexplicably not available for viewing the music on my iPod when it's connected to the computer to sync.
    The Column Browser is the simplest, easiest, most elegant way for me to review what's on my iPod, and create Playlists from my music and CD books.  It was available in 10.7 and is available on the computer, why not the iPod????!!!???
    Why mess around changing something that isn't broken - after all these years why can't that option still be available?  It doesn't have to be the default, just be available. Will I have to downgrade to 10.7 yet again????
    And you don't even have a relevant category for me to choose from below!!  It makes sense to me that you provide a general "Using iTunes" category.

    Thanks for your reply, but I've already done that and the Column Browser options are completely grayed out.  I've taken a screen shot and hope I can paste it in here.  You'll see I have the sidebar open.  That's the way I prefer to deal with iTunes.
    This happened after I updated to iTunes 11.0.4.  Perhaps that changed the setting options. I think I had the Column Browser option prior to that, but I just got a new iPod and I was busy loading stuff, so not completely sure if it worked before the update.  But I think I would have noticed, because it bugs me so much not to have the option.

  • Unable to access song list in ipod when connected to the computer.

    My daughter loaned her ipod to a friend who tried to download some music to her ipod. A box opened asking if she wanted to delete all her songs from her ipod and she was given yes, no, and cancel. She pushed cancel and got out.
    My daughters ipod has not worked correctly since.
    When connected to the computer and logged into iTunes she can see all the songs in her ipod but they are light in color and she can not play or pick songs from the list. She can't delete anything from her list in the ipod. She can play her music from the computer list just fine.
    What has happened and can we somehow get her ipod back to working correctly?

    Hello jhfields,
    So, you are saying that you are unable to pick and choose songs from the Music list for the iPod while it is plugged into iTunes?
    If the songs are grayed out, it is probably because the iPod is set up to automatically sync. In order to play music from the iPod through iTunes, you have to enable the "manually manage music and videos" option from under the iPod's Summary tab.
    Does that do the trick for you?
    B-rock

  • Are there any iPod Speakers that do NOT charge your iPod when connected?

    Hi there,
    I'm looking for an affordable iPod speaker that does not charge or gives you the option of not having your iPod charge.
    I know people who keep attaching their iPod to the dock speakers that they have, and it constantly keeps charging and that literally killed the battery on their iPod's.
    I know there is the Logitech MM32 (connects through headset jack), but not sure if that is compatible with the new Nano 3rd Generation.
    Does anyone know of any other speakers that does not charge your iPod while connected (when connected to the wall outlet -> AC) or gives you the iPod not to charge the iPod?
    Thanks in advance!

    Constantly charging does NOT kill the iPod battery, it is a myth.
    Once the battery is charged the main charging stops and it is switched to 'trickle' charge which means it get a slight charge every so often.
    There is not problem at all in keeping the iPod topped up, just make sure you discharge it fully approx once a month as per Apple's instructions here :-
    http://www.apple.com/batteries/ipods.html
    And general battery advice here :-
    http://www.apple.com/batteries/
    The key is the number of full charge cycles you o through, if you only ever keep topping up the battery then you will not go through full charge cycles very quickly. If you only ever top up the last 5% of the battery then you can do this 20 times and it will only count as 1 charge cycle. Based on the 400 they say you can get from a battery before the capacity drops to 80% that would mean you could top up the battery that last 5% over 400*20=8,000 times.
    Ian

  • HT201413 Why does iTunes not see my iPod when connected?

    My computer does not see my ipod when I connect it to it.  Nor does it come up in iTunes.  How can I sync my music with this problem going on?

    Try one or more of the following:
    > Restart your computer
    > Uninstall & Reinstall iTunes
    > Reset iDevice Settings (will not delete everything)
    > Go to My Computer (Windows XP) or Computer (Windows Vista & 7) and see if your iDevice shows (should show as a digital camera)
    > Restore iDevice completely (will delete everything)
    > Make sure both iTunes and iOS firmware is Up-To-Date
    iPod Classic driver not recognized in Windows 7. Tried to "troubleshoot," message says "Not Fixed." No recommendations - Microsoft Answers
    iPod not recognized in 'My Computer' and in iTunes for Windows
    Hope this helps.

  • Why cannot I see my music on my iPod when connected to the pc, using Windows explorer

    I am having problems with seeing my iPod Classic in my Windows Explorer.... when connecting using the correct leads I can only see the non-essential directoris, my music is hidden and is shown as F1, F2, F3,etc......
    Please help as I wish to transfer the music to my netbook...
    Thanks

    Those F1, F2, etc., folders are the ones containing your actual music.  If you copy these over to your Desktop and then into iTunes most of your track tags should still be with associated with the correct tracks in these folders.  Some may not.
    B-rock

  • ITunes on my computer does not recognize my IPod when connected to my computer

    When my Ipod is connected to the computer, it does not recognize there is a device. I have been able to sync my Ipod to my Itunes in almost 4 months. Songs transfer to Ipod but the playlists do not. I have tried to figure out the problem and nothing has worked so far to correct the problem. I hope someone is able to help me.

    Hello bre8613,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning recognition issues:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Your iPhone, iPad, or iPod touch may not appear under Devices in iTunes after you connect it to your Windows PC. Any of the following may also occur:
    The device cannot be restored in iTunes.
    An exclamation point, question mark, plug symbol, or "X" appears next to the device's entry in Device Manager.
    During an update or restore, the device may no longer be recognized by iTunes
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • My iPod Touch doesn't show up in finder or iTunes when connected to my iMac. Help!

    I have completely updated everything; uninstalled and reinstalled the latest version of iTunes...just about everything but do a headstand... what is next?

    Open up the the Finder app. Then go to the Go tab at the top.  Then select Go to Folder near the bottom of the menu that opens when you go to the Go tab.

  • Can i have multiple screens on my mac book pro when connected to my iMac using a firewire cable?

    What do I need to have multiple screens when I connect my iMac to my Mac book

    You should also ask this in the MacBook Pro forum. This is the forum for the 13” white and black plastic MacBooks that were discontinued in 2010. You should also post this question there to increase your chances of getting an answer.
    https://discussions.apple.com/community/notebooks/macbook_pro

  • Songs that appear in my ipod when connected to itunes disappear when discon

    when i connect my ipod color - 60g - to i tunes..all playlists show...when i add or delete songs, it apprears in the itunes directory under my ipod...when i disconnect my ipod...none of the changes show on the ipod....any ideas???

    This Apple knowledge-base article may help address that issue.
    Strange iPod behaviour.

  • Can't Play Songs on iPod when connected to iTunes

    This is a problem with my daughter's iPod, not mine (thankfully).
    When she plugs her iPod into her computer, she sees the iPod icon in the iTunes Source list. But when she clicks on the iPod, ALL of the songs are grayed out and can't be played. Doesn't matter whether we look in her iPod Library or in the playlists.
    All of the songs on her iPod are in iTunes, but she was hoping to delete the songs from iTunes in order to save disk space, and just play the songs on her computer thru the iPod connection.
    Anyone have any idea why her iPod songs are grayed out, and more importantly, how we can fix this?
    Thanks,
    Steve

    Resolved at home.

Maybe you are looking for

  • Corrupt file Unable to Download

    Itunes; 'cannot be updated because all of the playlists selected for updating no longer exist" Norton Alert "itunes.exe- Corrupt File the file or directory ( ipod_controlitunes/playcounts is corrupt" Itunes recommended updated to newer version-which

  • Ensuring that an text/calendar header is seen in MS Outlook

    At one point I thought I had this but alas not entirely. I'm working on a calendaring server which serves a fairly large community and need to be able to email calendaring requests out across clients. When I send out a few (say two or three) invitati

  • Error in Getting Database Connection from datasource

    Hi, I am getting the following error when I tried to get the connection from the datasource object. The call is made by the client proxy and the code is getting executed on the server side.    InitialContext ic = new InitialContext();    DataSource o

  • Portal Workprotect in Talent Profile - WebDynpro ABAP FPM application

    We are trying to implement Workprotect in ESS - Talent Profile application (HRTMC_EMPLOYEE_PROFILE). The requirement is that when user had entered data in either Internal work experience, External Work experience or other tabs; before he has saved th

  • Outbound Vendor CREMAS idocs failing due to No global company code assigned

    Hi I am triggring the vendor master Idocs from BD14 but they are failing with the error "No global company code is assigned to the company code" were as teh Company code that is mentioned in the error is maintained as a global compont code can some o