My ipod wont turn on, even when i have it plugged into the car or computer

I've had this problem earlier, but when I plugged my ipod into the car charger and held down the menu button, it turned on. My guess is that it just completly died. I have checked to see if the hold button was on also. I've even tried plugging my ipod into another computer, but still the same thing. I've been trying to read up on other similar problems, and i was wondering if i had to leaave my ipod unplugged for over 24 hours ( i heard that's what you have to do to solve some other problems.)
thanks for your time, please help me

If you haven't done so already, check out these. One of the recommendations is to leave it for 24 hours.
iPod won't turn on.
iPod battery doesn't charge.

Similar Messages

  • My Iphone 4 wont turn on, but if i have it plugged in the wall for in long time it turns on by itself and gets stuck at the apple logo

    My Iphone 4 wont turn on, but if i have it plugged in the wall for in long time it turns on by itself and gets stuck at the apple logo.
    i've tried everything but it still doesen't work, can you please hep me?

    First - Press both home button and switch on/off for 15 seconds it will reboot,If it does't work try 
    second -  connect ur iphone to system and open itunes then Press and hold both home button and switch on/off for 15 seconds phone will reboot then as soon as apple logo appears leave switch on/off without leaving home button it will go to restore mode then restore ur phone with latest version.
    Hope this will resolve ur issue but all ur data will be errased.
    Thanks

  • My ipod touch wont turn on even when i had it plugged in over night HELP!!!!!!!!!!!!!

    i am trying to get my ipod touch up and working since i came across it doing spring cleaning and i dont know what could be wrong with it my friend said it was hers and she had the same promblem with it so she just dint bother with it but i want to get it working but am CLUELESS help me?

    Try here:
    iOS: Not responding or does not turn on

  • When my phone is not plugged into the charger or computer, it will not turn on at all; even though it is not dead. When it's plugged into the computer, it will go to a white screen with a grey apple icon and then it will turn off again and repeat. IOS7

    When my phone is not plugged into the charger or computer, it will not turn on at all; even though it is not dead. When it's plugged into the computer, it will go to a white screen with a grey apple icon and then it will turn off again and repeat. IOS7 and iPhone 5.

    http://support.apple.com/kb/HT1808
    Try this step and if you cannot get your device into recovery mode there is a chance you have a hardware failure and you need to call apple to see what service options you have.

  • I was on the phone last night and my phone randomly turned off.  It will not come back on even when I have tried to hold the home button and the power button together while being plugged into the computer.  What do I do?

    I was on the phone last night and my phone randomly turned off. It will not come back on even when I have tried to hold the home button and the power button at the same time, while being plugged into the computer? What do I do?

    Plug it into power for at least 15 minutes.  If it doesn't automatically come on, try a reset... press the home and sleep (on/off) buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

  • Why does adobe premier elements render my video everytime i change something in it even when i have lots more of the video to edit? other editing software only seems to render at the start then lets you edit until your ready to save at the end.  Constant

    why does adobe premier elements render my video everytime i change something in it even when i have lots more of the video to edit? other editing software only seems to render at the start then lets you edit until your ready to save at the end.  Constant rendering means its almost impossible to edit anything. Please help.

    H TheGamer
    What version of Premiere Elements and on what computer operating system is it running? It will not influence my answer but will give me information in case I need to get into version specifics to detail my answer further.
    Timeline rendering is a preview matter. It does not fix anything, but it is your window of opportunity to catch of problem sooner than latter. If the Timeline rendering indicator displays orange (11 or higher) for the line above the Timeline content, that is the project telling you that you are not getting the best possible preview of the playback of that content in the Edit area monitor. And, every time you edit a file, you have altered the file from the time before. So, if you want to see the best possible for what you now have, you Timeline render. This is particularly helpful when you are dealing with titles, effects, transitions, and non native formats. You cannot turn off the Timeline render indicator system, at least none that I have ever found nor seen reported. You can do selective Timeline rendering by having the gray tabs of the Work Area Bar span only the Timeline segment that you want Timeline rendered.
    Consequently, you either ignore the Timeline render indicator system, move on in the project, and take your chances in the outcome or you Timeline render to get your best possible preview if the Timeline render indicator is suggesting that you do so.
    I am not approving or disapproving of this project feature, just commenting on the what is.
    This is not Adobe. Rather user to user. If you want to have your voice heard at Adobe, you might consider filing an Adobe Feature Request Bug Report Form.
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
    Please consider.
    ATR
    Add On...it is also possible to do Timeline rendering in a project, save close the project, and reopen it to find your previously "green" lined content now "orange", indicating unrendered. Yet the preview files generated originally by Timeline rendering are still existing in their hard drive save location. That is another story for other time.

  • WHY does the finder insist on rearranging the files in a folder in alphabetical order even when I have selected "none" in the preferences for file organization?

    WHY does the finder insist on rearranging the files and/or documents in a folder in alphabetical order even when I have selected "none" in the preferences for file organization? Even after I numbered the documents/folders to keep them in my preferred order, it will still displace them occasionally. This is becoming increasingly frustrating!
    Is this a "Pages" issue or "FInder"? The vast majority of documents I use are in Pages, but there are also Numbers, PDFs, jpegs and a few other applications involved. This never happened before I upgraded to Mountain Lion; in Tiger, the documents (mostly Appleworks) and files stayed where I wanted them to be.
    I am visually oriented, and prefer to arrange items in a folder in an order that makes them easier for me to access, which is often NOT alphabetical.
    Can anyone suggest a solution? Please??
    Thank you.
    Sara

    nbar,
    Thank you for your reply.
    However, I do not understand what you mean by "user account." I am the only user, and can find no options for "user" or "guest." The parental controls have always been off, as there are no other people who have access to my computer.
    Frank,
    Thank you for your reply.
    All my documents, files and folders are in icon view, Arranged By: none in both view and view options. This arbitrary rearranging does not happen all the time, only when I make a substantial change to one of the documents in the file or folder. I'm not sure what you mean by "column heading."
    MichaelLAX,
    Thank you for your reply.
    I know, to my sorrow, that Appleworks does not work with Mountain Lion. I spent at least three months converting approximately 2,000 Appleworks documents to Pages, Numbers, Bento (for databases) and Touchdraw (for drawings). So this is not the problem; but as I said, I did not have this rearranging problem with Appleworks - the icons stayed where I wanted them to be. I still miss the ease and reliability of Appleworks, darn it!
    Frank,
    Thank you for your second reply.
    I do have the Sort By: in view options as well as in view set to "none."   The finder still insists on rearranging, but only when I have made a substantial change to a document in that file or folder.
    Any futher thoughts?
    xdab, 
    Thank you for your reply.
    "Are you are using icon view, but for some reason the finder moves files around? is that the problem?"
    YES!! This is exactly the problem.
    "If this operation is successful then erase the original and rename the new one to the name originally chosen by the user."
    This seems like a lot of trouble, especially as I often work on several documents at the same time.
    "By the way, the finder has a "clean up by" menu that rearranges icons in one of the standard orders, there are shortcuts that produce the same effect, for example <option><cmd>1 sorts them by name. Is it possible that this shortcut was typed by mistake without you noticing?"
    I do know about this "clean up by" option, and avoid it like the plague! So I doubt this is the issue, and I infrequently use keyboard shortcuts like this anyway.
    Thanks all who replied. None of the suggestions seem to work, however. Any others out there?
    Regards,
    Sara

  • How to simply make the new ipod touch appear on itunes when it have been working in the previous computer (mac)

    how to simply make the new ipod touch appear on itunes when it have been working in the previous computer (mac)

    If the new computer is a PC see:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    If a Mac:
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    Mac OS X v10.6 or later: iOS device not recognized in iTunes after restart

  • How do I set up my time capsule to operate as a wireless hub when it is not plugged into the internet?  I want to be able to share wirelessly the information on the time capsule. thanks!

    How do I set up my time capsule to operate as a wireless hub when it is not plugged into the internet?  I want to be able to share wirelessly the information on the time capsule. thanks!

    I would prefer to answer in your post. as I have tried on two occasions to help.. so far this is the first time I can see you stated  you are using Lion.
    1. Did you download and install the 5.6 utility..?
    I said to do it.. you never said yes.. I did that.
    Please do it. .. you will get no place before you do.
    2. Did you bridge the TC.. ?
    If so it will work perfectly.. please post a screen shot of the summary page from the 5.6 utility. If something is wrong I can work it out from there.
    3. Or ring apple support and get them to walk you through the setup.. there should be phone support for the first week or two.

  • When I have headphones plugged into my iphone it says warning'' high volume'' and becomes first a red and then plop a number of red pops but it will not be so for someone else I know. My sound will be much lower than anyone else in the music, and when I t

    When I have headphones plugged into my iphone it says warning'' high volume'' and becomes first a red and then plop a number of red pops but it will not be so for someone else I know. My sound will be much lower than anyone else in the music, and when I talk by phone headset

    Hi! I have the same problem when I use my headphones .
    iPhone 4s England, iOS 6.1.2

  • Why is my ipad tell me it is not charging when I have it plugged into my home's power supply?

    Why is my ipad telling me that it is not charging when I have it plugged into my home's power supply?

    1. Reset iPad
    2. Try another wall socket
    3. Try another cable (make sure it's an original Apple cable)
    4. Try another charger (make sure it's an original Apple charger)
    5. Clean Lightning port with compress air

  • My iPod wont turn on anymore. I have had my iPod since the end of January of 2012, Last night it shut off on me. It keeps trying to reboot itself, but all it does it show the apple symbol, then the screen goes white and reboots again. I need help. :(

    Hi, My name is Cassie.
    I bought my iPod off of amazon just around the end of January of this year (2012). Last night I was playing around on my iPod. Listening to pandora, and editing pictures. I got to a picture and clicked edit, and then my iPod shut off. It rebooted itself and seemed to be running as if nothing had happened. I put my music back on and went back to the picture and tried to edit it again. I clicked the edit button and the ipod shut off again. This time, it kept rebooting. It went to the apple symbol to turn on and about thirty seconds, the time it normally takes to turn on, the whole screen went white and then shut off and tried rebooting again. It kept doing this over and over again. After a while, it did eventually stop, but only to a completely white screen. It was like that all night long because I fell asleep. (gave up on it). It is now the afternoon and after I held the lock button and the home button down the screen when off. I let it sit for about a half an hour, then I tried turning it on again. But it still is doing the same thing. I have no idea what I could have done to make it do this. Unfortunalty, I am not home to connect it to my own iTunes, but regaurdless, it wont even connect to the computer. I did have my ipod plugged in the whole time it was rebooting and shutting off last night. It was connected to my wall jack which normally works fine. But even having it plugged into the computer as it is now, its still doing the same thing. I am dissapointed that I might end up loosing everything that I have on it. I have not been able to sync it to my computer to save all the apps and pictures and music I have stored on it. I really do hope I can get some help or advice!
    Thank You!!
    -Cassie Lawrence

    Reset the PRAM
    Reinstall the operating system from the dvd (you will not loose your data)

  • IPod touch is unresponsive (black screen) unless it is plugged into the computer or wall adapter. It is fully charged. I have tried powering it off on back on.

    iPod touch is a blank black screen  doesn't respond unless it is plugged into a source ie computer or wall charger. It is fully charged and I tried turning it off and repowering it

    If Ingo's suggestion doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."

  • My cordless mouse dosn't work when I have it plugged into a hub!?

    Hi. I have a cordless mouse plugged into a usb-hub in which I also have plugged in a midi-keyboard. When I launch on of the applications, logic or protools, the mouse can't keep up. I simply have to unplug the midi-keyboard to use the mouse again! One of my freinds haves a similar setup as mine and seems to have no problems at all plugged either devices into the same usb-hub! Any ideas how that can be? I only have a mouse, a midi-key and a logic key plugged into the usb-hub and nothing else.

    Okay - I get it.
    Although it doesn't really solve the immediate problem, I'm wondering why you're not using the internal bluetooth in your computer to run your cordless mouse. If the mouse isn't bluetooth compatible, why not just get one that is? The new cordless mighty mouse should be available in stores shortly - I'm told - and that would solve all of your problems.
    Good luck.
    Paul

  • My iphone 4 has a broken lock button and wont turn on even when plugged in. How do I get it to turn on?

    I had 67% power at 10 am but when I went to lunch at 1 my phone was dead. I tried plugging it into a power source but it still wont turn on, and as previously stated my lock button is broken. How do I turn it on?

    If that is not successful try the remaining items of:
    Try:
    - iOS: Not responding or does not turn on 
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar 

Maybe you are looking for

  • Cash Management - refunds and unpaid DD - how to reconcile?

    Can someone help me on this ? We're implementing CM R11. Until now we've found solutions for most of the problems except for the following - refunds and unpaid DD AR uses debit and credit memos for the refund (no payment created in AP,) and adjustmen

  • I have to tell the world . . .

    THIS POST WAS ACTUALLY TAKEN FROM MY BLOG. <Edited by Moderator> "I have something to tell you." That was the phrase I uttered to my wonderful husband, when I got home from work the other day. But, before I tell you why, let me back up. You see, for

  • HT1296 I have accidentally created two iTunes accounts and I clouds.  How do I merge these into one account

    When I closed my mobile me account it appears as if it created two iTunes accounts and two iCloud's. Is there a way to combine the apps and data into a single account.  I want to get this straightened it before I get a new phone.

  • Object binding and ISDN connections

    Forté users, the problem is the following: we have a win95 client running remotely and connected to a server (ultrasparc solaris) via an ISDN line. The application works normally for almost all applicative functionality and Fortè mechanisms (events p

  • SAPScript - To break a line in two

    Hello Experts, I am using an standard text, where I need to display email in the right side. If email is 20 char, it comes normally, but if its longer then it wont come. Please suggest. &V_SMTP_ADDR1& - char(20) &V_SMTP_ADDR2& - rest part(221 char) W