My ISP requires a http login. I can use the iPad fine if I am logged in on a PC connected to the same wifi network, but if I login on safari on my ipad, the connection drops after some time.. any workaround?

My ISP requires a http login. I can use the iPad fine if I am logged in on a PC connected to the same wifi network, but if I login on safari on my ipad, the connection drops after some time.. any workaround?

TJBUSMC1973 wrote:
The iPhone is working, as designed and advertised.  In this case, the user failed to educate themselves properly, either by proper research or asking the right questions, before purchasing the device.
I understand that the OP failed to do research. But then, I wasn't replying to the OP. I was replying to Chris. I have Verizon. I can talk and use data at the same time with my Droid Maxx. Therefore, the problem is not just with the network. It would be technically possible for an iPhone to do that on Verizon/Sprint if Apple had chosen to use a different chip, such as the kind other phone manufacturers have elected to use.
Of course, this is probably all irrelevant to the OP's issue. It was merely a point of clarification, especially for those people who are used to being able to use both voice and data at the same time on Verizon. When they switch to an iPhone, they are often surprized at the limitation.
Best of luck.

Similar Messages

  • My iPad2 no longer connects to my home wifi network but there is no problem connecting to other saved wifi networks. Currently using iOS8.0.2. with storage capacity of 12.2Gb but only 147Mb free. Disconnecting the router and rebooting the iPad worked

    My iPad2 no longer connects to my home wifi network but there is no problem connecting to other saved wifi networks. Currently using iOS8.0.2. with storage capacity of 12.2Gb but only 147Mb free. Disconnecting the router and rebooting the iPad worked briefly as a temporary fix but not anymore

    You could try this
    Temporarily disable security on your home network
    See if the iPad connects
    If it does then reset the security - with the same or different password

  • My iphone5(ios 8.1) is not connecting to my home wifi network but connects to office wifi. This problem is only after updating 8.1

    My iphone5(ios 8.1) is not connecting to my home wifi network but connects to office wifi. This problem is only after updating 8.1I have already done "Reset Network many times. I have switched off and on my router multiple times. No luck.

    Hi vpraghu,
    If you are having an issue with connecting to a Wi-Fi network with your iPhone, I would suggest that you troubleshoot using the steps in this article - 
    iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • HT4356 I am trying to connect my printer, canon MG3170, it has been connected to the same WIFI network, but I still showing "no airprint printers found". I have tried to restart the printer few times but still the same. Please help, thanks (Dhoni-Singapor

    I am trying to connect my printer, canon MG3170, it has been connected to the same WIFI network, but I still showing "no airprint printers found". I have tried to restart the printer few times but still the same. Please help, thanks (Dhoni-Singapore)

    power everything off printer & router.
    re-boot ipad.
    Press and hold the Sleep/Wake
    button until a red slider appears, then drag the slider. Then press and hold the Sleep/Wake
    button until the Apple logo appears.  page 128 iPad user manual.
    more details on re-booting:
    http://ipad.about.com/od/iPad_Guide/ss/How-To-Reboot-Your-iPad-Power-Off.htm
    power on router then printer then ipad
    Cross your fingers.
    Robert

  • Device is connected to to a wifi network but does not have access to Blackberry services over wifi connection

    please help me, my blackberry curve has been working perfectly fine (everything network and wifi connection are working great) since i got it but all of the sudden when i connect to our wifi at home i noticed that the wifi logo on the upper screen is grayed out. i checked the manual and it says: device is connected to to a wifi network but does not have access to Blackberry services over wifi connection. i dont  know what to do, i tried the hard reset (removed batt for 1 min while phone is on and put it back in) i also tried to remove the wifi profile and added it back up but still nothing seems to work, my service provider has BB services available on my phone, i can received BBM, pushed email, use FB on my phone using my network but i cant use my wifi to browse.. what should i do? help me please!

    With a PC, the Windows Firewall and/or the anti-virus software will sometimes block an attempted Internet connection.
    Check both applications to see if you can find a "blocked" item and then take steps to "allow" the connection.
    If still no luck, temporarily disable the wireless security for a short period to see if the PC can connect that way. If it can.....then you know it is security related issue.
    See if the PC can connect using a setting like WPA-PSK-TKIP. The equivalent Apple setting would be WPA/WPA2 Personal.

  • It says im connected t a wifi network but when i go to safari it says im offline, it says im connected t a wifi network but when i go to safari it says im offline

    it says im connected to a wifi network but when i go to safari it tells meim offline

    Despite the WiFi sign you may not really be connected to your WiFi network.
    Your router may not have given your iPod a valid IP address. To check on this go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address shown starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
    Sometimes the fix for this can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
    If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

  • Odbc connection drops after some time over vpn -- help needed

    hi,
    sorry to tell u that i am not able to find the right suggestion/ solution in previous posts in this forum. my problem is like this:
    I am running oracle database (11g) on windows 2003 server. my oracle client (9i) is accessing database on that server. if the server is on a simple LAN, all the clients are able to login and the connection is lasting fine. recently, the server is configured in a VPN. now the clients are not able to sustain the connection for long time, the connection is getting dropped within minutes. whats the problem with VPN? even though the cluster configuration (VPN) is said to be done properly, whats going to be the problem?
    my client side application is with VC++ and using ODBC for accessing database. with oracle Net Configuration Assistant, the connection is working fine even on VPN, but when my application is trying to access the database over VPN, the connection seems to be intermoittent. please suggest me in this regard. thank you in advance.
    swamy.

    hi,
    sorry to tell u that i am not able to find the right suggestion/ solution in previous posts in this forum. my problem is like this:
    I am running oracle database (11g) on windows 2003 server. my oracle client (9i) is accessing database on that server. if the server is on a simple LAN, all the clients are able to login and the connection is lasting fine. recently, the server is configured in a VPN. now the clients are not able to sustain the connection for long time, the connection is getting dropped within minutes. whats the problem with VPN? even though the cluster configuration (VPN) is said to be done properly, whats going to be the problem?
    my client side application is with VC++ and using ODBC for accessing database. with oracle Net Configuration Assistant, the connection is working fine even on VPN, but when my application is trying to access the database over VPN, the connection seems to be intermoittent. please suggest me in this regard. thank you in advance.
    swamy.

  • SA 540 drops wan connectivity after some time interval

    hello guys,
    I have problem.  after a certain period of time (ranging from 2 minutes to several hours) the unit keeps dropping the WAN connection, making the unit unaccessible from the WAN side. The strange thing is, that when the connection is dropped, the unit is perfectly accessible from the LAN side, the WAN LED is still on, status info shows the WAN link up, and packet trace shows broadcasted traffic on the WAN interface, so only the directed communication to and from the ISPs gateway (configured to fix IP) seems to be blocked for some reason. When this happens, then plugging the WAN cable to the Optional WAN port enables traffic again, but it is also dropped after some time, and then only power cycling the unit restores WAN connectivity.
    please suggest me as soon as possiblethat how to fix this problem?
    Awaiting for valuable reply.....

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • HT3867 I am connected to the hotel wifi network, but the login screen does not appear.

    Hi,
    I am connected to my hotel wifi network, but the login screen does not appear. I am able to access the login page on my PC, but on the iPhone it does not appear and just tries to connect to the webpage (e.g. google.co.uk), and eventually gives up. I've tried opening pages in Safari and Chrome, but none cause the login screen to appear. I have also tried trying to log into the login page that the PC opens when connected to the wifi, but the same thing happens. I am using a iPhone 3G with the latest iOS version 6.0.1.
    Is there a way to make the iPhone try to open the login page?
    Ben.

    I have the exact same problem as the original poster and I tried many times already the solution proposed by trstark66 and it's still not working. It's not working for both my iPad and iPhone 5. I'm using the latest iOS version available all the time. I have my iPad since 3 years and my iPhone since 1 years and I always had that problem. I'm an airline pilot so I'm always in hotels. I asked my colleagues who also have iPhones and iPads and they all have the same problems from time to time. And when I go in an apple store they all say that it's the first time they hear about that problem. I never have that problem with my PCs, my previous phone and my BB playbook. Only with my iPhone and iPad....since now 3 years...Always the same problem. I'm connected to the Hotel Network, I have an IP address but nothing popup to register with a user name, password or just to access the "I have read and accept the condition.../connect". And when I go in Safari or other Browsers, I am not redirected to a login page. All I have is a message saying cannot access the webpage because I'm not connected to Internet. I tried already hard resets, on/off Wi-Fi, automatic connexion off, forget this network, reset network setting...
    My solution for now is to use my Boingo account. I connect to the hotel Network and then I use the Boingo app to connect to Internet.
    But, sometimes it works the first time or suddenly for no reason.
    Very funny, I was using Boingo on my ipad to write this message in my Hotel room because I was unable to use my free connection as usual. When I tried to press "Add Reply" it failed and I had the message "An error occured while trying to submit your post, please try again". The reason was that boingo was disconnected since I was taking too long to write this message. So I wasn't connected to Internet anymore. I opened a second tab in Safari and what did I see!... the login page to access the free connection from the hotel. This is crazy. Apple, you really suck with hotel/coffee hotspots... I tried for hours and nothing, now hours later I just open a new tab and it works. But tomorrow I know I will try the same and it will not work again. It shouldn't be that complicated.

  • HT1695 my ipad will not connect to wifi but my iphone 4 will connect to same wifi network

    i have an ipad but for some reason it will not connect to my wifi network. It is showing my network on the network page but will not connect to it just shows the circular icon loading. i have an iphone 3g and an iphone 4 they both connect to the same wifi network everytime no problem, the ipod used to connect to the same wifi network but not anymore ive tried re set etc but still nothing can anyone help thanks

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • HT3819 Home Share issue: I have a Mac and Apple TV. Both are log into the same Wifi network and the same iTunes account (I can view purchased movies on AppleTV). Home Sharing shows 'ON' for both devices. BUT...AppleTV shows no computers. Itunes sidebar-no

    Has anyone else found solution to Apple devices not 'seeing' each other on Home Share?  I have a Macbook Air (new Nov'12) and Apple TV (new Dec'12). Software updated on both. Both are logged into the same Wifi network and the same iTunes account (I can view movies purchased from iTunes on my AppleTV). Home Sharing shows 'ON' for both devices. BUT...AppleTV shows no computers... and ... Itunes sidebar does not have a 'Shared' area at all.  Help please as without this functionality, my Apple TV only provides portal to purchased (i.e. Netflix,...) content which I can get from Wii or Xbox.
    I have already tried the following without success:
    1. Homeshare DID work the first day after I setup Apple TV... but the next day it has not worked since then.
    2. Powered off 30 sec then re-started (Apple TV & Macbook & iTunes login)
    3. Checked Firewall settings per Home Sharing troubleshooting guide (correct settings)
    4. Turning on Photostream in iPhoto and selecting iPhoto within iTunes and then checking to see if Photostream shows anything on AppleTV (it shows 'on' for my iTunes account but 'Zero' pictures found ... despite the >3,000 pictures showing avail in iTunes).
    I also have 'Remote" app on my iPhone 4, with Home Sharing turned on (same Wifi network)... it has a very similar message as the Apple TV and same result that despite all devices having HomeShare 'on' they cannot see each other:  "Remote will automatically find the iTunes libraries and Apple TVs that have Home Sharing turned on using the account xxxx (it lists my correct itunes account name)."

    I solved this by reset of the Wifi (unplug cable and power to both modem and wifi ... wait 60 sec ... plug in modem cable and power ... plug in wifi power and LAN to modem ... restart AppleTV and Mac ... Turn Home Share 'OFF' in iTunes then back "ON" ... it took ~60 sec for the AppleTV to pick up my Mac in computers.

  • I currently have a WPN824 v3 Netgear router and I'm trying to set up my Apple TV. I'm able to connect it to my wireless network but my airplay feature is currently not working.

    I currently have a WPN824 v3 Netgear router and I’m trying to set up my Apple TV. I am able to connect it to my wireless network but my airplay feature is currently not working. The icon does not appear on any of my devices. My ipad and ipones all are currently up to date and are all joined to the same network. Is it the way that my router is configured. Please help let me know what I need to change in my router settings or does my router not work with Airplay. Or is there a simple fix.

    you don't mention which products you use
    only ipad2 and up support mirror
    and only iphone4s and up support mirror
    other devices only use airplay for apps which support tvout options

  • My iphone 4S is not able to connect to my home wifi network although it easily connects to others. Infact, i have tried connecting another iphone with my home network without any difficulty. So its just my new iphone 4S that is not connecting.

    My iphone 4S is not able to connect to my home wifi network (BSNL). It does detect it and even tries to connect to it but in vain. However, it connects to all other available networks easily. Another interesting thing is that all other devices including an iphone 4 easily connects to this home network. So what is the problem with iphone 4S???

    There are two ends to a wireless network. Try rebooting your router. Just pull the power for a few seconds and replug. No settings are lost.
    (The fact that all your other devices connect to the internet is irrelevant)

  • I purchased Fifa13 from the App Store, downloaded it in my pc..,but whrn i am trying to install it in my iad frpm the pc, i couldnt do it. The installation process stops after some time and the ipad shows some thing like "can sync..,failed to install fifa

    I purchased Fifa13 from the App Store, downloaded it in my pc..,but when i am trying to install it in my ipad frpm the pc, i couldnt do it. The installation process stops after some time and the ipad shows some thing like "can sync..,failed to install fifa13"
    What can i do?
    btw....,its happeniing only wth the fifa13,     installed other apps from pc previously.

    anybody answer me fast

  • TS4148 i update my 3gs to 6.1 from 4.1 after installation of software it shows connect to itunes or connect  to wi-fi when i connect it to itunes it shows the iphone tab in itunes bt after some times it say we are unable to complete your request please he

    i update my 3gs to 6.1 from 4.1 after installation of software it shows connect to itunes or connect  to wi-fi when i connect it to itunes it shows the iphone tab in itunes bt after some times it say we are unable to complete your request please help me

    That would be the wireless number assigned by AT&T when the purchaser of the iPhone signed up as a customer with AT&T. If neither you nor your uncle ever activated the iPhone with AT&T, click the "non customer" button.
    Note that jailbreaking often renders it impossible to get an iPhone officially unlocked, so don't be surprised if it fails. If it does, then you may have to buy a new iPhone, this time one that is officially unlocked.
    Regards.

Maybe you are looking for

  • How can I prevent a "Thread registered implicitly" error when using dlopen on a library that is built with a 3rd party library provided by FTDI?

    I build a dylib and link with FTDI's libftd2xx.1.1.12.dylib. However when I then use dlopen to load my library I get the "Thread registered implicitly" exception thrown. This is on Mountain Lion 10.8.2, using Xcode 4.5.2. I've checked FTDI, and the v

  • Problem in shut down

    i have recently bought leveno 3000 G410 2049-5AQ. i have installed vista os in it. now sometimes when i shut down it it hangs...  plzz help ...  u can reply on by email also   [email protected]

  • Trouble with e-mail & music

    I just got my TX palm and I set up my e-mail but I cannot figure out how to get it so that my yahoo mail will be sent to my palm instead of this "versaMail User" Also, I uploaded pictures with no problem, but is there a secret to getting music on it?

  • Safari 5 reopens tabs at random

    I have a very strange error in Safari 5 (Mac). If I close a tab, then go into one of the other open tabs, after a short while when clicking on a link, or refreshing a page, the previously closed tab will re-open and Safari switches me to it. I haven'

  • Custom HTML email stationary as default stationary

    I have a custom html email stationary that i need to have as a default setting so that i don't have to choose it before i compose an email. Any elp would be much appreciated.