My iTunes appears to be installed on my laptop (25%) and external hard drive (75%). To get it all in 1 place is it simply a copy-paste exercise for the folders?

Most probably, you have a 'private'-folder = part of an AVCHD-structure on your root-level of that drive.
Put it back into its folder (or any folder) - done.
Don't rip AVCHD-folders apart!

Similar Messages

Installing Windows 7 RC From and External Hard Drive?

I burned a DVD of the Windows 7 64-bit RC installer and successfully booted from the DVD. However, I hit the following error once the installer collects information about my hardware:
"A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, of USB Flash Drive, Please insert it now."
I cannot proceed any further. Another discussion board noted that June 2007 Macbook Pros have had internal DVD drive problems from recent firmware upgrades. I seek an alternate installation method. (Would and external DVD reader work at boot time?)
I'm trying to make a bootable external hard drive that has the Windows 7 Installer on it. I have tried extracting the contents of the Windows 7 RC iso file, and then placing the contents in a FAT32 formatted hard drive with the GUID Partition Table. However, my mac does not recognize the drive as bootable. I believe I am missing the procedure needed to make bootcamp recognize the drive as bootable. The drive was connected by Firewire if that matters.
My computer currently runs Mac OS X Leopard and Windows XP SP2. I have no access to a machine running Windows Vista.
How can I make a bootable external hard drive containing the Windows 7 installer for my macbook pro?

You can't get there with GUID/GPT.
There are tips on making a USB flash device that is bootable.
You can set aside a small 6GB partition somewhere and put Windows 7 installer there and run it WHILE IN Windows.
Windows Vista can be upgraded in place to 7 RC.
You'll need NTFS (30-50GB).
Windows doesn't support FW for booting.
You can create a drive that has Master Boot Record.

How do I stop iTunes from automatically importing songs I listen to from my external hard drive into the music library?

How do I stop iTunes from automatically importing songs I listen to from my external hard drive into the music library?

Mac OS X: Double-Clicking a File Opens the Wrong Application - http://support.apple.com/kb/TS2291
-= Changing the application used to open all files of a certain kind (written with reference to OSX 10.4 but may not have changed) =-
1) In a Finder window highlight a file of the kind you want to change the application to open that kind of file.
2) While that file is highlighted, select File > Get Info or press command (apple or propeller icon) + i to get a file information window.
3) In the lower part of the info window there is an "open with" menu with a list of applications.
4) If your application is already in the box then it is the default application for opening that kind of file and you don't need to do anything more. Close the get info window.
5) If the application showing in the menu is not the one with which you wish to open the file then select a new application. If your application does not appear there then select the "other..." and track down the application (usually in the Applications folder at the main level of the computer).
6) If you wish to change all files of this type to open with this application in future, make sure the "change all" button is selected.
7) Close the get info window.

I have all my music on an external hard drive. I just transferred all my files to a new hard drive . How do I sync all my files with my itunes library without losing all my playlists etc and keep everything intact?

I have all my music on an external hard drive. I just transferred all my files to a new hard drive . How do I sync all my files with my itunes library without losing all my playlists etc and keep everything intact?

Launch iTunes with the Option key held down, click on Choose Library, and specify it. If the external drive doesn't contain the iTunes database files, create a new library there and import that music.
If the library contains any rented movies, they won't play on a different computer.
(109334)

I transferred all my itunes music from my old pc to a new laptop using an external hard drive. I can drag songs to out ipods, but when i try to add songs to my Iphone 4, I get the red circle with a line through it. It will not allow me to transfer music

I have transferred all of my itunes music for my old pc to a new laptop via an external hard drive. All songs are sucessfullt loaded in itunes and I can drag songs to my husband's ipod without any problems. However, when I try to drag songs to my iphone 4, it will not let me. I get a red circle with a line through it. Why would it work from itunes to ipod but not to my iphone? HELP!!!

You might want to check your process for moving your iTunes music against this: http://support.apple.com/kb/HT4527.

I have tried and failed to copy my iTunes library and playlists from my Windows 8 desktop to my Windows 7 laptop using an external hard drive. Can it be done? Help would be appreciated.

I have tried and failed to copy my iTunes library and playlists from my Windows 8 desktop to my Windows 7 laptop using an external hard drive. Can it be done? Help would be appreciated. I have followed instructions found online but the library of music doesn't pull in. Thanks!
Nate

Migrate an iTunes library from one computer to another
These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entireiTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one, with ratings, play counts, playlists etc. preserved. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd normally recommend method 1 since it establishes an ongoing backup for your library and unlike copying with Windows Explorer the process can be resumed if it is interrupted and it will continue to the next item if there are any read/access errors.
Note if you have iOS devices and haven't moved your contacts and calendar items across then you should create one dummy entry of each in your new profile and iTunes should merge the existing data from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See Make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library or a backup then then seeRecover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
tt2

Installing Mac OS X onto an External Hard Drive

Will installing Mac OS X onto an external hard drive erase or mess with in any way files that are already on the external hard drive?
Can I safely install Mac OS X to an external hard drive that already has stuff on it to make it a bootable volume and still be able to access those initial files on the hard drive?

Will installing Mac OS X onto an external hard drive erase or mess with in any way files that are already on the external hard drive?
Not unless an Erase & Install is performed.
Can I safely install Mac OS X to an external hard drive that already has stuff on it to make it a bootable volume and still be able to access those initial files on the hard drive?
Yes.
(42261)

I run my iTunes via a external hard drive, however it has lost all it's contents and I haven't backed up! What can I do?

I run my iTunes via a external hard drive, however it has lost all it's contents and I haven't backed up! What can I do?
My iPad contents probably 75% of my iTunes library, but I'm scared to sync just in case in wipes the entire contents. I know I should of backed up but it was one of them jobs I never got round too (will def do now if my problem is solved)
Can anyone help with a solution?
Many thanks
Cobwebs73

If all of your media is from iTunes, don't worry about it. You can either transfer everything on your iPad from your iPad to your commputer; and/or you can redownload from iTunes all music and apps, and most of everything else.
If any of your media is from other sources, that's not so easily recoverable. If it's on your iPad, you can transfer it to your computer via a third-party application such as Senuti. (There are many alternatives to Senuti, some work just as well and are free.) Anything from non-iTunes sources and not on your iPad is completely gone, unless you have CDs or other physical media from which you obtained it stored somewhere.
At least now you know how important it is to have a backup.

TS1967 My external hard drive was stolen that stored all my purchased iTunes music. Is there a way to sign in to my account and redownload previously purchased music?

My external hard drive was stolen that stored all my purchased iTunes music. Is there a way to sign in to my account and redownload previously purchased music?

Yes, a search would have found the instructions.
Downloading past purchased from iTunes

I'm need to sell my MacBook and need to back up all my files includingn itunes will I be able to do so using an external hard drive?

I'm need to sell my MacBook and need to back up all my files including itunes will I be able to do so using an external hard drive?

To copy your current hard drive I like the free application Carbon Copy Cloner. It makes a bootable copy of everything on your hard drive http://www.bombich.com/index.html Check that it's set up right by booting up from the external drive.

How do I install an operating system on my erased hard drive when I get the error "This item is unavailable"?

So i erased my MacBook's hard drive trying to get a fresh, clean system install. After erasing, I tried to install a new OS X with the Recovery drive but after entering my Apple ID it simply says "This item is currently unavailable, Please try again later." So now my computer has no operating system on it, and I can't get one.

You may need to do the following. Check this to be sure you can: Computers that can be upgraded to use OS X Internet Recovery. If you are OK:
Install OS X Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.
If the above does not work, then you have to first install Snow Leopard:
Clean Install of Snow Leopard
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. After you finish Setup Assistant will complete the installation after which
         you will be running a fresh install of OS X. You can now begin the update process
         by opening Software Update and installing all recommended updates to bring your
         installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
You can now upgrade from the App Store, but right now Apple's servers are not working for Snow Leopard users, so be patient and keep trying to download Yosemite.

How do I stop ITunes from loading songs into library when played from an external hard drive

How do I stop ITunes from loading every song I play into my library from an external hard drive?

Mac OS X: Double-Clicking a File Opens the Wrong Application - http://support.apple.com/kb/TS2291
-= Changing the application used to open all files of a certain kind (written with reference to OSX 10.4 but may not have changed) =-
1) In a Finder window highlight a file of the kind you want to change the application to open that kind of file.
2) While that file is highlighted, select File > Get Info or press command (apple or propeller icon) + i to get a file information window.
3) In the lower part of the info window there is an "open with" menu with a list of applications.
4) If your application is already in the box then it is the default application for opening that kind of file and you don't need to do anything more. Close the get info window.
5) If the application showing in the menu is not the one with which you wish to open the file then select a new application. If your application does not appear there then select the "other..." and track down the application (usually in the Applications folder at the main level of the computer).
6) If you wish to change all files of this type to open with this application in future, make sure the "change all" button is selected.
7) Close the get info window.

Problem with itunes and external hard drive

I've have recently downloaded the newest version of itunes, I also have an external hard drive with 40gbs of music on.
When I open itunes preferences and set library to an external one, none of my music copies to itunes.
I have tried to individually copy music folders to itunes, but my whole mac freeze's
Any advice please?

You might find this article useful: iLounge - Managing your iTunes Library on an External Hard Drive

I have my iTunes Library on and external hard drive. I have a new computer and want to use iTunes and KEEP my files on the external drive.

My iTunes library is on an external hard drive, and I was able to access / add to the library from my windows laptop.
I now have a new laptop, and want to be able to KEEP the library on the external drive while being able to use iTunes from the new laptop.
I have selected "choose library" in iTunes, and have chosen the iTunes Library.itl file on the external drive.
My media populates in iTunes on the new laptop version of iTunes, but when I click on a song iTunes says that it cannot locate the song.
Your help is kindly appreciated!

Thanks. Were the settings shown in your last screenshot in force when you added the song that's shown on being on the C: drive? It is also possible that at some point you ran iTunes with the external drive disconnected, in which case it will have defaulted to the library on the C: drive, or that you've run iTunes without explicitly selecting the library on the E: drive. To make sure the latter is the case, hold down SHIFT while starting iTunes, then when you get this prompt:
click on Choose Library..., navigate to the location of your current iTunes Library.itl file, and click Open.
Part of your issue may that its not obvious where that current database file is located. The folder layout on your E: drive isn't the one that's most easily managed - so its possible that the database file could be in:
E:\xxxx\Files\iTunes
E:\xxxx\Files\iTunes\iTunes
E:\xxxx\Files\iTunes\iTunes 1
I suggest that a lot of your issues can be addressed by reshaping your library into the reliable "portable" layout as described in tt2's Make a split library portable user tip. Comparing your screenshot with the equivalent on my system (where I have a "well-formed" library on an external drive):
where:
there is just one iTunes folder with everything used by iTunes inside it
all media is held within subfolders of the iTunes Media folder
The way you have yours set up, where the iTunes Media Folder location is set to E:\xxxx\Files\iTunes rather than E:\xxxx\Files\iTunes\iTunes Media is probably why some of your media is not being located correctly - the extent to which iTunes can correctly resolve locations is, to an extent, reliant on the folders for the different media kinds (Music, Audiobooks, etc.) being inside the iTunes Media media folder. One common misunderstanding (not helped at all by Apple's documentation!) is that the iTunes Media Folder location setting in Edit > Preferences > Advanced does not tell iTunes where to find anything; rather it determines where iTunes will put new additions to your Library, in conjunction with the Copy files to iTunes Media folder ... flag:
I would definitely take the time to work through the steps to bring your library into the "portable" shape - there may be few remaining issues with broken links when that's complete but this will be much easier to fix if your library is in a more standard structure.

Can I split my itunes music library between and internal and external hard drive?

Is it possible to have music on the two different drives and still be able to make playlists from both drives to put on my ipod? Here's my situation: I'm using a Dell 32 bit computer running Vista Home Premium SP2 which I share with other users. I have a large itunes library (40g+ of music only) that's starting to hog the hard disk space from other users. If possible, I would like to split off part of my itunes library to an external hard drive while still having access to the entire library for my ipod. Ideally I would like to have all my downloaded songs on both the internal and external drives so I'll have backups in case a drive fails, while putting all the music I have hard copies of solely on the external drive. Any help on how this can be done would be appreciated.

If you manually manage your itues library, you can store parts of it on an external drive, or on an internal drive. Just keep in mind that in iTunes that you must set a default location for iTunes to manage it's files, and that will be the default location for iTunes to store anything it downloads. You would need to manuay manage moving things from there if tht is not where you want them stored.
Perhaps a "better" solution would be for you to invest a little mone into 2 external drives. One to hold your entire iTunes library, and the second to be your off-line backup of the first. This is the method I have gone with and I like how it works for me. My entire iTunes library is on an external (portable) 320GB drive. Then, when iTunes is not running, I will clone my external drive onto a second drive I happen to have, this way if I have any failure of my primary drive, I lose at most about a weeks worth of content. For me, I purchase little content during a week, but I do move a fairly large volume of podcasts. With the entire library being on the external drive, if I ever have to swap to using my backup drive iTunes wil just think that it hasn't run and downloaded anything for a week, and all the "lost" content will be re-downloaded automatically. This won't work for apps or purchased content, but for subscribed podcasts, it is great.

My iTunes appears to be installed on my laptop (25%) and external hard drive (75%). To get it all in 1 place is it simply a copy-paste exercise for the folders?

Similar Messages

Maybe you are looking for