My iTunes does not list any devices when I plug in my new iPhone to the computer. how do I get iTunes to recognize my new phone?
My old iPhone died, so I just got a new one. I am hooking it up to my computer for the first time. The iTunes on my computer doesn't show any devices as being hooked up to the computer when I plug in my iPhone. Yet my iPhone is charging so I know it is connected to the computer. Any suggestions on how to get my iTunes to recognize the new device? Thanks
Make sure that your music is in the format supported by the iPhone. I use either MP3 or AAC.
A friend had the same problem a while back. All his music was in the WMA format and is therefore not playable on the iPhone and would not copy. Once he converted his songs to MP3 they copied to his iPhone without problem.
Similar Messages
-
My computer and itunes app do not see my iphone when I plug it into either USB port on the computer. The cable works because I can hear the iphone start charging off the computer. But there is no indication of the device in itunes or on my hard drive device list. Any ideas?
Have no idea what you mean by "basic stuff". Try EVERYTHING in this support article:
iPhone: Not recognized in iTunes for Mac OS X -
I have just gotten my new ipad!!! I downloaded latest version of itunes but my ipad does not show in devices when I try to sync music. Any suggestions??
Does a little box come up seeing the iPad as a camera? That doesn't impact iTunes as much as it confirms that your computer sees the device. If your computer doesn't see it then iTunes doesn't know it's there.
If you're plugged into a hub or extender, try plugging it directly into the box or main part of your computer.
If you're using an extension, stop and just use the included sync cable.
Try using a different USB port.
After you installed iTunes, did you restart your computer?
Usually what's needed is the 'apple device driver' which installs automatically, you just need to sometimes trigger the install, using different ports helps with that.
If the simple trouble shooting doesn't help then you can search on the Apple Device Driver and there's more detailed trouble shooting on the site. -
my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?
There is a hardware problem. Whether it's worth it to you to have no working phone for 2 months until you can update vs paying for replacement/repair now is a question only you can answer.
-
My new Ipad 2 wifi does not charge and itunes does not find my device when pluged into my pc
My new Ipad 2 wifi does not charge and itunes does not find my device when pluged into my pc. Help
You should probably start here and go through all of the troubleshooting steps and then report back if you are still having problems.
http://support.apple.com/kb/TS1538 -
My iPhone 4s does not appear on devices when connected to iTunes in my Mac
My iPhone 4s does not appear on devices when connected to iTunes in my Mac
Check to make sure you have enough free space to include the videos.
-
hi even when i connect my macbook and apple tv to the same wifi network i cant put on the air play mirroring option.my airplay mirroring option does not detect any device.what can i do for this?
See
http://support.apple.com/kb/TS4215 -
My photostream in windows 7 PC does not shows any pic. when i click on slide show it start showing me slide shows of pic but when i try to copy files i cant do as no photo is viewd in list mode. This problem has arised since IOS is updated.I reinstalled my icloud and checked if icloud sharing is ON. I can see pic in my photo stream in PC only in slide show mode. While in list mode it shows pics before i actually click on photostream folder. My phone memory is out becose of bunch of photoes. How do i copy my photostream photoes.
Hi all. I can’t tell you how to solve your iCloud 3.x issues. Heck, I don’t think they’re even solvable.
But if you had a previous version of iCloud that was working correctly then I can definitely tell you how to solve the “iCloud Photo Stream is not syncing correctly to my Windows 7 PC” problem. …without even a re-boot.
Log out of iCloud 3.0 and uninstall it.
Open My Computer and then open your C:\ drive. Go to Tools/Folder Options and click on the View tab. Select the “Show hidden…” radio button and click on OK.
Open the Users folder.
Open your user folder
Open ProgramData (previously hidden folder)
Open the Apple folder – not the Apple Computer folder.
Open the Installer Cache folder
In Details view sort on Name
Open the folder for the newest entry for iCloud Control Panel 2.x – probably 2.1.2.8 dated 4/25/2013
Right click on iCloud64.msi and select Install.
When finished, the synching between iCloud and your PC will be back to working perfectly as before the 3.0 fiasco. The pictures will be synched to the same Photostream folder as before the “upgrade”. Now all you need to do is wait until Apple/Microsoft get this thing fixed and working before you try the 3.x upgrade again.
I think the iCloud 3.0 software was written by the same folks who wrote healthcare.gov with the main difference being that healthcare.gov might eventually be made to work.
For those of you who hate to go backwards, think of it as attacking to the rear. Which would you rather have, the frustration of no synching or everything working on an older version?
Good luck… -
ITunes does not show any devices
My iTunes does not show any devices, even the new iPhone connected directly to the PC.
Hey rtm56,
Thanks for the question. I understand that your iOS devices are not being recognized by iTunes for Windows. The following article may help to resolve your issue:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/TS1538
Thanks,
Matt M. -
Why does Group created on Master console does not show any device count mapped on the managed Amp?
Q: Why does Group created on Master console does not show any device count mapped on the managed Amp?
A: When a group is created on master console it will be pushed to all the managed amp which is added with Manage group configuration enabled. The Group pushed to the managed amp will be created as Global group and you can create subscriber groups for the global group to which you will add the device into since we cannot add any devices into global group directly.
Hence there is no device added to the global group, on the master console it does not show any device count for the groups that are created on master console.Laura Quitugua wrote:
Hi,
I have syced my outlook email with my iphone 4s and ipad.
Note that only the email account info (username, login, server) is sync'd.
The actual emails are not sync'd.
Opening an email on one device does nothing on teh other devices. -
The query does not reference any table when attempting to build the WHERE clause. (IES 00022)
Hi
I am getting below error.
The query does not reference any table when attempting to build the WHERE clause. (IES 00022)
This error is in Validating Measue object in IDT.
It is not throwing error for dimensions objects but only for measure objects.
My BO version is 4.1
Backend is Teradata 14.1.
Regards
Gaurav.Hi
In the dimension/Measure definition, you can select the table. Find the below screenshot.
If you still getting the issue…Can you please share your screenshot, for better understanding the issue? -
My top and under folder does not list any images
Suddenly, my top and under folder does not list any images ?
For exemple : lightrom 0 /2013 0 /2013-05-11 126
LR5 ; I run windows 8 64bits
Thanks for your help.
Best regard
RegisLibrary Menu, select "Show Photos in Subfolders".
-
Can someone please help me get my iPhone to sync to your computer?
I can not sync my iPhone to the computer. I keep getting up an error message that synchronization does not want to start. I have uninstalled iTunes and then reinstall it. But the same warning box will appear. How can I get my phone in sync again?Hello lenmin,
Thanks for using Apple Support Communities.
To help resolve this issue where you're repeatedly prompted to authorize with your Apple ID in iTunes when syncing, please follow the directions in the article below.
iTunes: Missing folder or incorrect permissions may prevent authorization - Apple Support
Have a great weekend,
Alex H. -
my ipone 4s does not see any wifi networks my ipad works ok tried all of the above resetting network etc still does not see wifi ?
If no change after restoring the iPhone with iTunes as a new iPhone or not from the backup, the iPhone has a hardware problem with the wireless card or with something else.
-
My keyboard plugs into the back of my display monitor it does not work? but when I plug the keyboard into my MacBook Pro it works fine? is it my display Monitor?
Try:
- Resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Resetting network settings: Setting>General>Reset>Reset Network Settings
Maybe you are looking for
-
Can't print online after installing IE9, HP Deskjet 1050 print scan copy
A week ago or so I installed IE9, had IE7 and it just was not working with allot of web pages so I updated to IE9. I sell on ebay and I went to make a printing label thru ebays site and I keep getting this error message. an error has occured in the s
-
I just downloaded Firefox RC1. When I open the Add-ons Manager and go to Get-addons i see no text, only images.
-
Ok I have this code inside a symbol called Gallery: stop(); ////Event Listener///// img1_btn.addEventListener(MouseEvent.CLICK, play1); closeimg_btn.addEventListener(MouseEvent.CLICK, closeIMG); ////Functions///// function play1(event:MouseEvent):voi
-
Hi All, The Transformation Guide of OWB mentions that DECODE, CASE can be used. But I am unable to find either of these functions in the Expression Builder. Can you please tell me wher should I search for these functions, or if you could tell me if t
-
can anyone give me the fields relating EBAN, EKKO and EKPO