My iTunes is telling me that the registry settings are missing for importing and burning cd's and dvd's and to reinstall. I do reinstall and it is still not there and I have at least 4 times.
My iTunes is telling me that the registry settings are missing for importing and burning cd's and dvd's. I have installed the latest up as well as uninstalled and then reinstalled a few times, at least 4. The registry settings are still not there and I cannot burn to a cd. HELP!!!
To fix registry, refer to this article:
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299
Similar Messages
-
I keep getting the message that my registry settings are missing for importing and burning cd's and dvd's. Why?
I've completely uninstalled iTunes per the support instructions and reinstalled. But I still get the error message each
time I click on the iTunes icon. I went into iTunes support and searched for registry settings and got an error message 404.
It was no help.Hey JWeaver208,
Thanks for the question, and great troubleshooting so far. If you continue to see this message after uninstalling and re-installing iTunes, you may need to install the device filter in the Windows registry, as outlined in this resource:
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299
Thanks,
Matt M. -
I just installed the latest version of iTunes, but when I went to open iTunes I got a message saying registry settings used to for importing and burning CDs and DVDs are missing and I should reinstall iTunes. Really?
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
Upon opening Itunes I get a warning that my registry settings are missing
When I open Itunes I get a warning message that my registry settings are missing. How can I fix this?
(Apologies for butting in, wha.)
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
I get an alert saying "The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes." I reinstalled iTunes, restarted pc, and I checked what other CD/DVD burning software by searching on DVD. Results: Cyberlink DVD suite deluxe, HP Smartmedia DVD , and Windows DVD Maker, all of which I've had forever. Should I delete these and try to reinstall iTunes again? Are there other reasons that this message pops up?
Got the same Pop-up and Apple Sppt told me that UNinstalling Quicktime had fixed this issue in most other cases. I asked IF I had to start over with Uninstalling iTunes, and she answered Yes.
Read my too-long thread (below) that has an Apple Sppt link at the start about Manual Deletes of several Apple Folders/files being a Key to a proper Uninstall / Re-install of iTunes.
Do as much as you want but this is what experience led me to so far. We haven't done it yet since the iPhone Sync'd OK and CD burning is not a priority.
https://discussions.apple.com/thread/5901869 -
I have uninstalled and reinstalled iTunes several times, but keep getting an error message that "the registry settings for importing and burning CD's and DVD's is missing". Can anyone help with this?
It keeps telling me to reinstall iTunes, but it continues to come back with the same error message.
-
I have installed my lexmark x1100 printer to my macpro lion but though it registers its there it keeps telling me that the inkjet pots are not in position or wrongly inserted, how can I overcome this problem which is driving me crackers!!!!!
Thanks for the additional info. If the printer works using your Dell Laptop, then the printer is working fine. The problem is with the driver. The Lexmark X1100 is only compatible up to Mac OS 9.2.2. If you have the Mac OS X, unfortunately, it's not compatible with that OS.
You might want to consider purchasing a new printer - preferably a network printer since you have multiple computers. We do have printers that are currently on sale online. You can check it out here: http://bit.ly/KQBDe0
Those printers are compatible with the newest Operating Systems both for Windows and Mac. It also has drivers for Linux. -
Exlamation point on 7 tracks from an entire album, all the others are fine. It won't play on the laptop, I get an error message that the original files are missing. But they play fine on the iPod.
Try deleting those missing tracks from your computer's iTunes, connect the iPad to your computer and do File > Transfer Purchases - that should copy them back from the iPod
-
I have been trying to dl itunes on a computer thats used my songs are missing
have been trying to dl itunes on a computer thats used my songs are missing?
I do not understand what you are saying
-
When I click on itunes, I get a message that says, "the registry settings used by the itune drivers for importing and burning cds and dvds are missing. this can result from installing other cd burning software. Reinstall itunes." I am a really inexperienced computer user. My computer is a windows 7. Would someone please walk me through this or tell me where to find information on how to do this. Thanking in advance, Laurie
Check out this Apple article -> iTunes for Windows: "Registry settings" warning when opening iTunes
The article will walk you through reinstalling iTunes and then checking for or creating device filters. Did it help? Did you run into any problems? -
The following is the message I am getting when I start Itunes. I have remove and reinstall itunes to no avail please help daughter got new ipod and wants to play with it.
"The registry settings used by itunes fot importing and burning cds and DVD are missing. This can happen as a result of installing other CD burning software. please reinstall itunes."Refer to this article:
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299 -
I have tried reinstalling numerous times but I keep getting the same message and I cannot use the burning feature. I have other burning software on my computer but it has always been there. This problem just started recently. Please help!
This same thing happened to me about two months. ago. I bought a new harddrive for my previously-fried netbook, and when I installed iTunes it gave me the missing registry business. So I came online and looked for solutions. This solution led to a different 'can't burn' error in iTunes, and I found a solution to that one, and it was like I was running in circles for a solid two weeks. Finally I managed to fix the problem, but after trying it hundreds of times I couldn't tell you which solution won out. Well, everything was fine and dandy, until I upgraded iTunes last night. Now its back to the same registry settings problem, and I want to maim something. Someone please help me ;___;
I'm running Windows 7 by the way, on an Acer aspire netbook -
For some reason my Quick Time player no longer works or even show up in my programs list. I tried downloading it again and the message I get is "The feature you are trying to install is on a network resourse that is unavailable." It somehow is gone and I don't understand why. I am a novice so any help should be simple for me to understand. Thank you.
Try one of the links here:
http://support.apple.com/downloads/#quicktime%20windows -
Just noticed that the sequence settings are wrong
hey everyone
just a few quick questions from a newb....
i just finished working on a video and I noticed that I didn't properly setup the video, the original video files were in 1280 x 720(iphone) i noticed some jagged edges and every time I export it renders out to 720 x 480.
I remember I changed the easy setup after the clips were added to AIC 720p30.
As I'm playing around with the sequence setting, I hit the load button and the dimensions/canvas changed to the desired settings...
but now the movie clips are I'm guessing 720x480 because the canvas changed but the movie clips stayed the same size. Is there anyway I can get everything to 1280x720? without having to start over?
Everythng is small compared to the canvas now. However, when I drag a clip onto the canvas is the proper size and fills up the space.Hi
As I get it - One can't change setting in an upstarted project.
So as I understands it - One must start a new Project/Sequence to make the new setting to take.
Yours Bengt W -
Every time I plug my Ipod Nano or Ipad 2 into my computer I get the same error message. It says that registery settings are missing for importing burning cds and dvds due ot other burning software and to untinstall itunes and reinstall Itunes. I've done this several times and I'm not having any trouble importing cds at all and I can't make the message go away. It always comes up before Itunes will open.
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes
Maybe you are looking for
-
I got the IPOD installed on my laptop but want to install on my Sony computer running Windows. After software installed and reboot, I plug the IPOD into the 2.0 USB port...but the computer doesn't recognize the IPOD to install the necessary driver af
-
Rebate - Cancelling or deleting accruals
Hi All, We have created rebate agreement. For 10 invocies rebate accrual is calculated (say 200 $). Now business decides on 30th of month not to pass the rebate discounts to customer due to some issue. Now how we can reverse the accruals with out cr
-
So many problems after downloading verizon internet suite!!
After downloading the verizon internet suite , i am having some major issues with my computer that i have never had in the 3 years that i have had it. Actually , i have never had problems with my computer or any of the anti spyware and anti virus pro
-
HI, is there any possibilty to fetch the data directly from sap to 3rd party system like database oracle/mssql/access.... i think its poosible from ohb. can anyone provide me the steps for this??? what are the prerequisities for these type of steps a
-
Hi there, I want to know how many users are there in one SAP system...how can i findout ,, regards Rao