My itunes wont work I just installed some new update and now it wont even come up, I click the Itunes icon and nothing happens
my itunes wont work I just installed some new update and now it wont even come up, I click the Itunes icon and nothing happens. Please help me I've tried uninstalling it and downloading it again but that didnt help :/
DFU mode? How do I do that? So far the only thing I can do is hold down both buttons to power it on and nothing is on the screen and it wont reconize on my computer....
Similar Messages
-
I just bought OS X Lion and now it says I need to go to the App store and pay even more money to get a newer iPhoto for PhotoStream to work between my iPhone and my computer. Is this a rip off to make us pay more $ or is there another way to update iPhoto?
Yes, you’ll need to upgrade to the latest version of iPhoto for $15. That is the only solution. You can read here if you wish: http://www.macworld.com/article/160380/2011/06/icloud_what_you_need_to_know.html
-
I just bought a new ipad 2, but cannot use it as it only shows the itunes logo and a cable. This means it's telling me to connect to itunes. I've done this and performed sync, still no way out. I have been told by friends to "unlock" it. Please how?
Have you already activated the iPad? That is what the screen is telling you to do - connect to the computer with the supplied cable and run iTunes while connected - and iTunes should guide you through the set up process. If you have already set up the iPad and you are still getting thos screen message - restore your iPad. You must be running iTunes 10.5 on your computer as well.
Restore iPad
If you can't restore this way, you will need recovery mode.
Unable to Restore -
Using iPad first generation I downloaded my 1st rental movie from iTunes. Says on a grey button "Downloaded." How do I PLAY the video on the iPad? I clicked the "downloaded" button but nothing happened. Do I need a special app to play the movie? Thank you. flora j
Thank you so much! I've spent days on this. I'm 80 years old trying to learn this wonderful modern technology. flora j
-
my ipd is stop working after i install a software updates it ask for restore ipad when i did that it show error 3194?
savvyfromvic wrote:
... error 3194?
Please see the More Like This section on the right.
Also... see item 3 Here > Community etiquette -
Just installed a new airpot extreme with a modem to use as a wireless system. Setup was successful however with 3 iPads and one laptop we cannot get all devices access to Internet. Each reset of airport extreme results in a different combination of devices that successfully connect. Any ideas as to why?
Well, this is interesting,
Let me tell you coulpe of things I noticed:
- Are you using LEAP as the EAP method? some config examples illustrate configuriong using LEAP with WEP keys. Forget this and use WPA2-AES.
http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_example09186a00801c40b6.shtml
- in some AP configurations (AP1 for example) I can see that:
wlccp authentication-server client any method_Users
This means that the wlccp client authentication will use the method called method_Users. Let us see what is configured with this method:
aaa authentication login method_Users group Users
This shows us that the method method_Users uses the server group named Users.
let us see what is configured withe the group Users:
aaa group server radius Users
NOTHING!! it is empty!! so when a client tries to connect it will try to autheticate it against the radius server but the radius server group that it needs to check is empty.
so I think you need to either use the correct method under which the server is configured with the wlccp statement. OR you need to configure the method_Users with correct user group that contains a server.
Check and let me know if that works.
Regards,
Amjad -
Cliffs:
-Open new tabs from original page.
-Clicking reload icon or hitting F5 will not work on new tabs, but works on original page.
-Can "right click" reload tab or all tabs, but reload icon and F5 won't work.
-Been using FF3.6 for months, never a problem. Just started happening 2 days ago. Updated to FF4, but problem still remains.bump.
-
I have tried using the browse and buy content from the iTunes Store tab on the website and followed everything it says and still can't buy anything.
I understand that Firefox is no longer working on your Windows Tablet. The development of Metro did stop and has been discontinued. However what version were you on before this started to happen?
-
Yesterday I downloaded the most recent version of itunes and created a playlist....i was unable to burn it to a CD. Message was there was no burner...it's like the entire drive is missing from my computer. My computer tech guy said the same thing happened to him but he hasn't found the fix yet. Any help???
Whilst it may not be your fault I am afraid it appears that your post is on a forum which is not the best for your OS. It will save the time of the unpaid volunteers here, and may resolve your issue faster, if you could examine the list below and see if there is a more appropriate forum to which you could direct your question.
OS X 10.9 Mavericks
OS X 10.8 Mountain Lion
OS X 10.7 Lion
OS X 10.6 Snow Leopard
OS X 10.5 Leopard
OS X 10.4 Tiger
OS X 10.3 and earlier
OS 9, OS 8 & System 7
OS X Technologies
OS X Server
iPad
iPhone
iPod
Other -
Does anybody know how I can restore my itunes to recognize my iphone? I updated to Windows 8.1 and now there is no recognition of my iphone as a device in the itines window.
Hi skippy2012trev,
Welcome to the Apple Support Communities!
I understand that you updated your Apple Id and password but now you are being prompted for the old information in iCloud. You are on the right track by changing the Apple ID back to the previous email address temporarily so that you can sign out. You should not need to verify the email address. After you edit the Apple ID back to the old email address and then sign out of iCloud on your iPhone, edit the Apple ID back to the address you would currently like to use. There is no need to change the password again, only the email address, unless you prefer to update the password again.
If you're asked for the password to your previous Apple ID when signing out of iCloud - Apple Support
Change your Apple ID temporarily
If signing out and back in to iMessage or FaceTime didn't help, try these steps:
Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
Tap Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
Scroll down and tap Sign Out, then tap Sign Out to confirm. If you're using iOS 7 or earlier, tap Delete Account, then tap Delete to confirm.
Tap Keep on My [Device] or Delete from My [Device]. In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
Enter the password for your previous Apple ID.
Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
Return to Settings > iCloud and sign in with your new Apple ID.
Cheers,
Joe -
Ipad 2 just started talking? Now when you try to click on an icon it just tells me what it is? Very annoying? Help? Just had since Christmas not very techy so have no idea what I pushed to make it start doing this?
Cindi-
Go to Settings-General-Accessibility-Vision. Be sure VoiceOver, Speak Selection and Speak Auto-text are all set to OFF.
Fred -
I updated my iphone and now it tells me to [plug it to the itunes store but i dont got a computer
My phone needed to be updated.. So when I download the software update it resets my phone and tells me to plug it up to the iTunes store and I don't got a computer with iTunes at the moment
Sounds like your device has gone into Recovery mode. You can only recover the device with the computer and iTunes. You will need to borrow one if you do not have one.
-
My iPhone 3 is stuck in Recovery Mode and now will not even come up in iTunes
I bought my phone last week and only received it yesterday and last night, i was updating it on itunes, when it went into recovery mode.
I have tried many different ways of getting it out and nothing has helped at all.
And now, my iTunes will not even recognise the device.
When I was trying to restore the phone it kept coming up with code 1015.
Please help!Morning lisa-mariefromqld,
Thanks for using Apple Support Communities.
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software.
For more information on this, take a look at this article:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694#error1015
To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
For more troubleshooting on this, take a look at this article:
iPhone not appearing in iTunes
http://www.apple.com/support/iphone/assistant/itunes/
Best of luck,
Mario -
My iphone rebooted and now it shows a USB cord pointing to the Itunes symbol
My IPhone rebooted or reset itself after trying to update, now it shows the USB cord pointing to the ITunes symbol. How do I synic it? What do I do?
Connect it to iTunes and upgrade or restore it.
-
It just keeps telling me "The session failed to start"
It means the device is in recovery mode. You'll need to reconnect it to iTunes and restore it again.
You may need to connect it in recovery mode manually using the instructions in this Apple support document.
iOS: Unable to update or restore
B-rock
Maybe you are looking for
-
This is how I fixed wifi greyed out on iPhone 4S
It happened to me during a trip to Finland, wifi could not be switched on any more after iOS7.1 update, it was greyed out in control panel, I was not able to use hotel wifi, ... that cost me some Euros. Later I found, bluetooth also not working. But
-
HT203477 Missing file warning with an import of Red footage.
I updatd a project and got seveal missing file warnings. Two clips seem to be very much stuck in this mode. I have trashed the files out of the project and off the drive and tried several time to reload them to no avial... Does anyone have any ide
-
Buttons disabled while creating JCO- SLD configured in solman
Hi All, I have configured SLD in solman.And I have made relevant entries in Visual Administrator also. When I try to create jco in my portal,all buttons are disabled. I had faced this problem when I had configured SLD in portal itself and that got re
-
In SAP 4.6 - Purchase order delivery address - Change
Hi All I have created a PO and in print preview i can see the delivery address as plant address, which is also in PO item details. Now the EKPO-Address number does not have any value. Once I have changed the delivery address in item details, the deli
-
If I close out Internet Explorer, how do I access Flash Player?
Whenever I try to install FP, I am instructed to close out all programs, including I E. If I do this, how do I access FP?