My left speaker is not working properly, and also making a crackling sound.
I just bought this computer about a month ago and already having problems. Such as my computer shutting down on its own and now the speakers just started today. It is only the left speaker that starts cracking and then goes completely out, onlt hearing the right side speaker. This is the first time I have ever purchased an HP, and I may have to return this and go back to using Dells.
I even had this too, try to go to sounds your speaker and adjust the left and right speaker, the left speaker without the right makes a crackling sound, the right speaker is opposite of that.
If this cannot work try to go to a computer technician to fix the problem
I'm actually want to fix this through a technician, but he's the one to fix the speaker.
Hope that's alright.
Similar Messages
-
Aspect ratio not working properly, and also, my final dvd has wierd ghosting
Hi,
I just can't seem to make a project work with encore. It's very touchy it seems. I have several videos that I tried to put together in a dvd, but I was having problems with the aspect ratio. Even when I used "Interpret Footage", the videos would incorrectly scale, most of the time to 4:3. At first they would look fine, but after transcoding, they would distort and sometimes be cropped on the 16:9 timeline I was using, or sometimes they would pop to 4:3 with black bars on the side.
It seems Encore NEVER gets what kind of video I'm using, even when I manually set the PAR in the Interpret Footage dialog.
So my solution was to bring everything into After Effects, render it back out as uncompressed AVI and use encore to make a dvd image which I then burned. My settings for this movie were 720x480 with a 1.2 PAR. The wierd thing is, I rendered two movies out in this way, Encore understood that one of them should be widescreen, but not the other. What gives?
I still had to do some tricks in Encore to get it to understand that these should be widescreen movies, and when I finally got them transcoded and looking right in my 16:9 timeline, I made an image. Then I burned it. Then I looked at it on a tv and I swear, every piece of text and or image had haloing on it.
Can someone tell me if this is a problem in my workflow? Encore is so confusing, I just want to know what the best method to making a simple dvd is. I don't want menus or any of that, just a dvd that loops. I can make one, but the quailty sucks. can someone tell me what I am doing wrong?
Thanks in advance,
StanI think I'm onto something. I exported form After Effects as an Mpeg2-DVD so I end up with
*.m2v files.
I had set those in AE to be 16:9 aspect and when I imported them into Encore they popped right into my 16:9 timeline with no problems. and the final build went way easier too, way faster.
Then I looked at my dvd on the tv and it still didn't look so great. But when I compared it with similar dvds that others had done, theirs had jagged edges on text as well and I thought, is this because I'm using Standard Definition?
I'm very new to this, so maybe I'm expecting too much. My images on the dvd play back fine on the TV, but the text doesn't look great.
Also, maybe I'm not sure how best to set up my video. When I play my movie back on the TV (A Samsung) and I select the pictures size of 4:3, my video is centered with black all around, but it's 16:9. I have to hit P Size two more times taking the TV first to 'widescreen' (which makes my image look stretched), then to zoom which makes my image fill the TV screen. I think some of my quality issues have to do with this scaling. Is there a way to make my dvd fit the full screen on 4:3 aspect on the TV? -
I have iPhone 4. and my left speaker is not working. Now what i do.. Plz help
The speaker is only on the right. The holes on the left are for the mic.
-
my speaker is not working properly in 4s if i use headphone its working now my volume increase decrease button is also not working properly how can i solve it pl help me my warranty finished
Hello. I sent my WRT1900AC V1 to Linksys four days ago (Monday) via UPS with a RMA. Linksys paid the shipping and everything. The router is still in route, and it should arrive to their offices tomorrow. Once they receive the WRT1900 AC V1, they are going to send me an EA8500 as a replacement. But I have been reading the comments about the EA8500 here in the forum and it seems to have the same problems. I guess the firmware is extremely flawed in both routers (maybe it is almost the same code?). Anyway, I will try the EA8500 and I hope it works. I bought a temporary router from Walmart and I paid $35 for it. It is a Belink N600 DB. I can't believe that a $35 router is working a lot, lot, lot better than my previous $250 WRT1900AC router. Unbelievable. If the EA8500 doesn't work, I'm going to try and get my money back from Linksys, or contact The Consumerist or someone to get my money back and get a Nighthawk instead.
-
Macbook Air Late 2010 model, 10.6.7, 2.13 4g ram. Trackpad is not working properly and in sometimes not at all. Need suggestions to resolve this issue? I have applied all Mac updates and still having problems with the trackpad.
The machine has a 1 year warranty, book an appointment with your local Apple Store or AASP to have it looked at.
You can try doing a SMC reset however I don't think that is the solution.
SMC RESET
• Shut down the computer.
• Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
• On the built-in keyboard, press the (left side) Shift-Control-• Option keys and the power button at the same time.
• Release all the keys and the power button at the same time.
• Press the power button to turn on the computer.
PRAM RESET
• Shut down the computer.
• Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
• Turn on the computer.
• Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
• Hold the keys down until the computer restarts and you hear the startup sound for the second time.
• Release the keys. -
Laptop left Speaker audio not working
Sir,
I have dv-5 1102 tu model laptop, in that left speaker audio not working. But, in headphones & Speakers have no problem in both left & right audio.
Kindly do the needfulHey @KKVK ,
Welcome to the HP Forums!
I understand your left speaker is not working on your dv5 notebook.
If the headphones are working it would tell us the sound card is fine. The same properties are applied to the speakers and the headphones in your audio control settings.
You could try a system restore to before the issue started to make sure it's not something in the operating system. To perform a system restore see the following guide: Using Microsoft System Restore (Windows 8) or Using Microsoft System Restore (Windows 7).
If this fails I would suggest contacting HP Phone Support to send the notebook for service. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the following link to get the support number for your region: Phone Assist Worldwide.
Thanks!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP. -
My speaker r not work properly.?? what can i do..??
my speaker r not work properly.?? what can i do..??
Btmman wrote:
.... I have used this app in the pass and this never happened. Is this a software problem?
I have not seen this issue myself.
But it may be a problem with the software, unless someone else has any ideas, I suggest you contact Apple:
http://www.apple.com/feedback/imovie_ios.html
Sorry I can't help any more. -
My iPhone 6 ear speaker is not working properly I couldn't able to hear any thing from ear speaker to listen I had to put on loud speaker or to use hands free please help me out with this problem if some body have answer?
Hi Venkata from NZ,
If you are having an issue with the speaker on your iPhone, I would suggest that you troubleshoot using the steps in this article -
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L -
Audio is not working properly and battery is not lasting
audio is not working properly and battery is not lasting over 30 mins
Hello swampdonkey,
I see that you are having a problem with the sound and battery on the computer. I would like to help with this issue but I need some information.
Can you provide the model and product number of the computer? Here is a link that shows how to find that information.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
after update to IOS 4.3.5 my Iphone incoming and out going calls is not working properly and I have to remove the SIM regulerly to conduct or receive a call
It is not practicale to do this always any one faces the same problemThere may be a problem with the SIM card. Get a new SIM card from your carrier - there should be no charge for a replacement.
If no change with a new SIM card, the standard troubleshooting steps in order are:
Power your iPhone off and on.
An iPhone reset, which is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release.
Restore your iPhone with iTunes from your iPhone's backup.
Restore your iPhone with iTunes as a new iPhone or not from your iPhone's backup.
If no change after any of these steps in order, your iPhone has a hardware problem. -
ce upgrading to iOS 7 the built in speaker is not working properly. It crackles & sounds like there's lots of interference
Hi, JoJoEvs.
Thank you for visiting Apple Support Communities.
Here is an article that you may find helpful when experiencing this issue. After all steps related to your sound issue have been processed, see the section labeled Issue not resolved.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Cheers,
Jason H -
I tried to migrate my files from my old G4 book to my new Macbook Air. It did not work properly and I want to restore the Air to its original settings. How do I do this?
You will need to use an external DVD drive to run the disc installer that came you your machine. You can also do it with another Mac using the Remote Install Max OS X app. Finely, if you have access to another computer, you could burn the install image on a USB thumb drive, boot from that, erase the drive and run the installer.
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G + 120G OCZ Vertex 3 SSD Boot HD -
Does anyone else have a problem in iTunes where they download a movie trailer and then they get a message saying iTunes is not working properly and it shuts off iTunes?
Hello Suzanne,
Thank you for providing the details of iTunes unexpectedly quitting. You have taken some really good troubleshooting steps already. I found an article with additional steps you can take to further isolate and troubleshoot an issue like the one you described:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Thank you for using Apple Support Communities.
Best,
Sheila M. -
i am new to mac air. Today i installed (unsuccessfully!) MAPLE16 on my mac book air. Now since it does not work properly (it also does not appear in applications) i decide to delete it. I could not remove it from launchpad . i need urgent help from your side.
Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
I never install system modifications myself, and I don't know how to uninstall them. You'll have to do your own research to find that information.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmyrmac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button.
You generally have to reboot in order to complete an uninstallation.
If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
You may be advised by others to try to remove complex system modifications by hunting for files by name, or by running "utilities" that purport to remove software. I don't give such advice. Those tactics often will not work and maymake the problem worse. -
In My IPhone the sound device not working properly. I can here the sound through head set only.kindly send an idea ti solve this problems
Hello. I sent my WRT1900AC V1 to Linksys four days ago (Monday) via UPS with a RMA. Linksys paid the shipping and everything. The router is still in route, and it should arrive to their offices tomorrow. Once they receive the WRT1900 AC V1, they are going to send me an EA8500 as a replacement. But I have been reading the comments about the EA8500 here in the forum and it seems to have the same problems. I guess the firmware is extremely flawed in both routers (maybe it is almost the same code?). Anyway, I will try the EA8500 and I hope it works. I bought a temporary router from Walmart and I paid $35 for it. It is a Belink N600 DB. I can't believe that a $35 router is working a lot, lot, lot better than my previous $250 WRT1900AC router. Unbelievable. If the EA8500 doesn't work, I'm going to try and get my money back from Linksys, or contact The Consumerist or someone to get my money back and get a Nighthawk instead.
Maybe you are looking for
-
My location service comes on by itself!
location service turned off in settings, but location arrow keeps coming up on it's own. It's killing my data usage when i don't catch it right away. please help
-
PsCC asking for serial number. Don't have one.
I ppayed 980yen/manth in Japan. But Photshop CC requesut enter Sirial No. I don't knomy sirial No. Why not ? Can't use PsCC. Where is my payment?
-
I downloaded a ringtone from my Iphone, it played a few times, now it won't play
I have an Iphone 3g, I purchased a ringtone through Itunes from my phone. It played a few times, now will not play.
-
How do I Show date and time when I hover over clip like in iMovie
How do I get FCPX 10.6 to show date and time when I hover over a clip? I can so it in I movie and as I move over my clips the date/time is shown. I need it for that specific point in the clip not just the record start time.
-
Hi all, There is no error message on WHLK build #9926. But the error message pops up on installing build 10022/10031. Did you get the same problem while installing WHLK build 10022/10031? Here is the s=installion step: Launch "HLKSetup.exe" on Server