My Mac desktop will not reboot?

I shut down my iMac and it will not reboot correctly.  I power it on and it will sit for hours with the apple logo in the middle of the screen with the small rotating circle underneath which makes it look like it is thinking.

Hello,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitirion & use Disk Utility from there to Repair the Disk, then Repair Permissions.

Similar Messages

  • My mac desktop will not provide sound from internal speakers.  when I go to audio devices window it only shows airplay.  How can I get internal speakers back.

    My mac desktop will not provide sound from internal speakers.  When I go to audio devices window it only shows airplay.  How can I get internal speakers back.

    There are many possible causes for this issue. Take each of the following steps that you haven't already tried. Some may not apply to your model. Back up all data before making any changes.
    1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
    2. Run Software Update and make sure you have a fully up-to-date installation of OS X.
    3. If you've installed an application called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and restart. You should do that even if the software is not causing the problem, because it's useless.
    4. Other third-party software that has been reported to interfere with sound output includes "Boom" and "Samsung Kies." If applicable, uninstall according to the developer's instructions (not by dragging something to the Trash.)
    5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
    6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select Built-in Output from the list on the left. If the Mute boxes are checked, uncheck them.
    7. If a red light is visible in the audio-out port when sound should be playing, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
    If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
    8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Restart and test.
    9. If you have a MacBook Air, turn off Bluetooth and restart.
    10. Start up in safe mode. Don't log in; just restart as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
    11. Reset the NVRAM.
    12. Reset the SMC.
    13. Triple-click anywhere in the line below on this page to select it:
    /Library/Preferences/Audio
    Right-click or control-click the highlighted line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash. Recreate your settings in the Sound preference pane.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
    14. Reinstall OS X after backing up all data.
    15. Make a "Genius" appointment at an Apple Store.

  • My new mac desktop will not recognize samsung yp-t9j

    my new mac desktop will not recognize samsung yp-t9j
    what do i do?

    Reset the SMC and the PRAM on the iMac and retest.

  • Mac Pro will not reboot after Bootcamp attempted installation

    I have an older quad-core 2009 Mac Pro. I tried to install Bootcamp before realizing that it's not supported. Now the Mac Pro will not reboot.
    It starts up fine. It shuts down fine. But it just will not reboot. When I try to reboot, it just clicks like it's trying to boot to a DVD or a drive that's not there (I have since formatted the drive I was using for Bootcamp and use it for Time Machine now).
    This is what I have tried:
    - PRAM reset
    - SMC reset
    What could be keeping my Mac Pro from rebooting properly?? Please help. Thank you!!

    So you tried with Mac and Windows on same drive?
    And you have Recovery partition.
    You made a clone with CCC as well and cloned the Recovery
    Paragon makes a couple programs to make life easier.
    And, Well, Boot Camp works. There are unwritten rules. There is a forum devoted to it.
    2009 is not old. Old is pre-2008 due to UEFI / EFI64 and how Windows 64-bit now looks during install.
    It did install but the drivers and updates and such might be an issue.
    Apple does not support HFS arrays, not just that Windows won't install but to mount, their Apple HFS driver.
    You left out so much and maybe your IT didn't include Windows on Mac.
    www.apple.com/support/bootcamp
    In general pull all your drives during install except that one Windows will be installed on.
    Do get video driver from ATI etc yourself
    Tell us what version, I assume Windows 8 which works fine other than a few issues - more with MacBook series and iMac or Mac Mini lines.

  • My mac pro will not reboot

    My mac pro keeps freezing up on re-boot.  My mouse will not work so I can't do anything to try and fix it.  What should I do?

    Try these in order:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
         after the chime press and hold down the OPTION key until the boot manager screen appears.
         Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Or, if you running Snow Leopard:
    Resetting your Mac's PRAM and NVRAM
    Intel-based Macs: Resetting the System Management Controller (SMC)
    Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • Mac mini:  Will not reboot

    I have a late 2005 Mac Mini (not intel). The other day I disconnected my ipod accidently while it was updating and ever since I'm having issues.
    Mini froze up and then wouldn't boot. Finally go it to boot up once then screen froze. Then wouldn't boot again.
    Tried the install cd, got to the desktop and installer but everytime I clicked something, such as the utility, etc noting would respond.
    I ran the hardware test and got that there was a hard drive error 2STF/8/3:ATA-100-ata-6-MASTER. I did read that with Disk warrior I can still get around this.
    Just got Disk Warrior and put in, held down C started up, heard lots of noise like the mini was reading the disc, then after about 2 minutes the mini just stays on the gray screen with the mac logo and spinning gray wheel thing. Listening closely to the drive it sounds like it is hanging...I can hear a repeating sound ever 3 or 4 seconds.
    Is warrior working?
    Can I still get my data off the HDD? Already tried target disk mode and although the firewire symbol comes up the mini doesn't show up on my desktop.

    Hi mmh. It sounds to me as though your hard drive has failed, and I don't know where you read that DW should be able to "get around that." DW has no ability to repair hardware. Still, Craig's suggestion to call or email Alsoft is a good one. Alsoft may know exactly what the AHT error message means, and whether there's anything to be done about it other than replacing the drive.
    To eject the DW disc, hold down the mouse button while you power-up the Mini, and keep holding it down until the disc pops out. This should work whether or not the Mini ever successfully boots: it's a hardware command that's executed before loading begins.
    Craig's comment about the optical drive firmware has nothing at all to do with your problem — it's just something you can consider after you solve the problem.

  • Power mac g5 will not reboot with Startup discs. Has had hard drives replaced with PC ones

    I have an old G5 power mac tower. The hard dives were removed and replaced with PCs ones before I was given it. I do not know if they were formatted. I have the original boot up disc and I want to start again with this tower. The tower turns on but does not recognise the keyboard (which I know works) so I am unable to boot from the CD to have a fresh tower.
    Any ideas

    If the drive(s) is bad, it can prevent boot.
    Try removing the drives and then try and boot to the install disc (hold C).
    Of course, install isn't possible without a hard drive, but this is a test.

  • My Mac Desktop will not turn on just beeps

    We lost power and now my MAC destop wont turn on just beeps when I hit the power button HELP

    Here's a list of error tones:
    http://support.apple.com/kb/HT2538
    ..but you might want to try an SMC and PRAM reset:
    https://discussions.apple.com/docs/DOC-3603

  • Mac mini will not complete shutdown-closes desktop, goes to blue screen, and spinning icon just spins forever, so  must power off to reboot.

    Recently, My Mac-mini will not complete the "shutdown" or "restart" routine; it closes the desktop screen, goes to the light blue screen, but then the spinning indicator (not the "wheel of death") just keeps spinning forever with no shutdown (I've let it spin for >2 hrs.).  Have run disk/permissions verifications and repairs from applejack, disk utility, Mactuneup.app & all report ok.  Any suggestions, please?
    Doug

    Have you tried with
    Control Option-Command-Eject

  • After 10.6.5 update my mac will not reboot

    After 10.6.5 update my mac will not reboot. It just spins at the white apple screen. Luckily boot camp works but, all of my important stuff is on the mac side. What can I do? I did not backup(I know that was bad), can I get my old settings and files back? What do I do?

    Try sig's suggestion first, then, if that doesn't fix it, try some of the fixes here:
    http://discussions.apple.com/thread.jspa?threadID=2653184&tstart=0
    Some of them won't be relevant if you can't even boot, of course.

  • Mac mini G4 will not reboot after Onyx upgrade

    DURING UPGRADE OF ONYX INSTRUCTED TO RUN REPAIR DISK FROM MAC OSX INSTALL DISK. SYSTEM WILL NOT REBOOT. ANY SUGGESTIONS?

    Have you booted from the OSX install disc yet?
    With the power on, insert this disc, then force the computer to turn off by holding down the power button for 5-10 seconds.
    Then restart the computer. As soon as you hear the startup chime, hold down the C key -- and keep holding it until you see the "gear" spinning on the screen.
    You need a wired keyboard to do this. If you don't have one, borrow a usb PC keyboard.
    Once you boot from the install disc, don't install! But instead run DiskUtility from the Utility menu at the top of the screen.
    BTW if DiskUtility can't repair the hard drive, you might have better luck with DiskWarrior -- though it will cost about $100 to find out.

  • My Desktop Mac Duo will not start up.

    My Desktop Mac Duo will not start up. I keep getting a grey screen with the 'no entry' symbol. It can't find the srtat up disk. I cannot get it to start from the original system software CD either.

    Disconnect all wired peripherals except keyboard, mouse, and monitor, whichever is applicable. Remove any aftermarket expansion cards. Check the installation DVD for dirt or scratches. Run a cleaning disc through the optical drive. Try again to boot from the DVD. If you can't, you have a hardware fault.

  • My Mac froze while typing. I had to turn the power off. Now it will not reboot. I get to a white patterned screen

    My Mac froze while typing. Nothing could move so I turned the power switch off. Now it will not reboot. I get the chime but it stops at a white patterned screen

    Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional — ask if you need guidance.
    If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
    Keeping your confidential data secure during hardware repair
    *An SSD doesn't need to be zeroed.

  • MacBook Pro 13" Retina will not reboot in Yosemite

    I have a brand new -- the newest model -- MacBook Pro 13 in. Retina that was doing well with Mavericks.  After having Yosemite installed it froze up when the top was closed, and now it will not reboot.
    I tried holding the power button down for several seconds and then pressing the power button again, just long enough to get the start-up gong. Tried this three or four times.  Each time the reboot stops when the progress bar on the screen, under the Apple logo, reaches just less than half way.  Then nothing. Letting the machine sit for long periods while it works out its own problems does not help. No progress toward rebooting.
    I have tried rebooting with and without the power cable attached.

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
    a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.  
    Step 10
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 11
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 12
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 13
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • Mac Pro will not restart from dropdown menu

    Hi all,
    My Mac Pro will not restart from the dropdown menu or when clicking the 'restart computer' when installing software updates. I have an external firewire hard drive hooked up as part of my backup process. It contains a clone of my startup disk.
    I have tried disconnecting the firewire drive, rebooting then attempting to restart from the dropdown menu. Still no joy. I always have to end up shutting down manually by holding the power button in and then restarting with the power button.
    Any thoughts?
    Thanks in advance.
    Dennis

    You might try Safe Mode (It will take more time to startup in Safe Mode because it runs a directory check.)
    If your Shutdown functions correctly that way, go to System Preferences >> Accounts >> Login Items, and remove them. Boot normally and test. If not go to ~(yourHome)/Library/Contextual Menu Items and move whatever is there to the desktop. Then do the same with /Library/Contextual Menu Items. Lastly, try moving ~(yourHome)/Library/Fonts to your desktop and restarting.
    Log out/in or restart, if that sorts it start putting items back one at a time until you find the culprit.
    EDIT: Also, if you can launch Activity Monitor in your Utilities folder and see if you can find the process that is still running.
    -mj
    Message was edited by: macjack

Maybe you are looking for