My macbook pro 13inch doesn't recognize Huawei E303C 3g dongle what should plz suggest?

I am not sure about using a usb hub fo this problem, if any one knows abt this plz respond. If so which one to use usb2 r usb3.

You will have to contact the technical staff of the Internet provider. Your problem may be that the modem is not compatible with a pure 64 bit OS.
Ciao.

Similar Messages

Macbook pro unibody doesn't recognize hdd, is it cable or motherboard?

Hi,
A few weeks ago I replaced my hdd in my macbook pro 13inch med 2010 with a ssd. Some weeks after I did it, my macbook didn't boot up anymore, it showed a flashing folder. I put my old hdd in and it still doesn't boot up. I use my macbook now by booting from a external harddrive through usb.
However this makes the laptop much slower so I want to fix the problem. My problem is: how do I know if it's the cable from hdd to motherboard is broken or the connector on the motherboard itself is broken?
Hope someone can help me out,

Aahh, so DiskUtility does not see the HDD that is inside at all? That means trouble: either the HDD inside is dead, but probably the cable inside is not connected correctly or is damaged (or you forgot to connect a cable).
I suppose that you wanted to change the HDD with the SSD, and that you have cloned the HDD to the SSD (while externally), then after a while the MBP did not start tanymore form the internal (SSD) and you switched them again, and it still does not start from the internal (HDD), but it will from the external (SSD). The MBP starts from the SSD (outside), so that is OK, but the HDD inside is not recognised anymore.
-hanging question: What OS do you run (you have 10.0.x indicated)?-
I deduct that it is either a loose connection or a damaged connector inside.
To be sure you could switch them again and see if the MBP starts from the outside HDD (if not, and it starts from the inside SSD, the HDD is wrong), but I guess that then the MBP will not switch from the inside disk either.

2012 Macbook Pro 15" doesn't recognize VGA monitors plugged into displayport

We have a 2012 Macbook Pro 15" (and a 2010, and a 2011). The 2012 doesn't recognize VGA/DVI (old) monitors plugged into it, but it does recognize new DVI monitors.
What gives? I'm not even sure how to diagnose or attempt to treat this.
2012 Macbook Pro
OS X 10.8.3
Wacom Cintiq
Vuzix iWear
etc

Does it see, recognize, any usb devices?
Have you tried a smc reset?
http://support.apple.com/kb/HT3964
If that doesn't fix it and no usb device is being seen by that port then you have a hardware problem and you need to take the system to apple to be fixed before your warranty runs out.

MacBook Pro Laptop doesn't recognize new internal hard drive

I have a mid-2009 MacBook Pro laptop. Recently I started getting the flashing question mark in the file folder issue. It could not locate my hard drive. I tried all the basic troubleshooting steps which did not work. So, I then replaced the hard drive and the SATA cable. I restarted it with my Snow Leopard installation disk, but the hard drive still will not show up in Disk Utilities or when I try to restart and am given the option to choose a different drive. It also does not show up when I try to do an installation. Please help!

I'd suggest double checking the new SATA cable connections just to make sure they're on correctly. If you have an external housing you can put the drive in there and see if Disk Utility sees it. That will at least verify the drive is good.
http://www.amazon.com/Sabrent-2-5-Inch-Aluminum-Enclosure-EC-TB4P/dp/B005EIGUD4/ ref=sr_1_3?ie=UTF8&qid=1397956818&sr=8-3&keywords=2.5+enclosure

I have a Macbook Pro 2010 I think and its not powering on what should I do?

I have a Macbook pro 2010 I think. When I plug it in the little light on the charge cable goes green but when I press the power button nothing happen no fans no noises nothing someone please help.

Welcome to the Apple Community.
Unfortunately, it sounds like you can't but you may be able to use a 3rd party solution.
AirPlay Mirroring requires a second-generation Apple TV or later, OS X 10.8 or better and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). You can see which Mac you have and which operating system you are using by selecting 'About this Mac' from the Apple menu in the top left corner of your Mac and selecting the 'More Info' button.

I am trying to use an external 3g modem made by Huawei model e173s-6 and when I do connect it on my usb port the macbook pro just do not recognize it. I own a 2012 model with mountain lion 10.8.2 . What should I do ?

I am trying to use an external 3g modem made by Huawei model e173s-6 and when I do connect it on my usb port the macbook pro just do not recognize it. I own a 2012 model with mountain lion 10.8.2 . What should I do ?

I still don't know what happened to my test Aperture Library after the update to 3.4...Not only were my previews lost, but so were the original images! Needless to say, I haven't bothered to update the main library on the Mac Pro because I don't want to deal with this level of uncertainty (even with backups in place).

HT201249 I would like to sync my iPhone 4S to my MacBook Pro, so that I can restore to the iPhone 6, I just bought. When I plug the 4s into the Mac Book Pro, Itunes doesn't recognize it and says that I need to upgrade my phone to Itunes 11.1.

WHat do I do if my iPhone 4S won't sync to my macbook pro, and my phone doesn't seem to upgrade to itunes11.1? The upgrade should be on the iTunes upgrade page, but there's no icon.

There must be something wrong. You should update the iTunes on your Macbook pro to make iTunes recognize your iPhone. For more details, check out:iOS: Device not recognized in iTunes for OS X - Apple Support

I bought a new macbook pro 13inch retina and sometimes the charger doesn't work properly, I dont know if its the charger or my laptop?

I bought a new macbook pro 13inch retina and sometimes the charger doesn't work properly, I dont know if its the charger or my laptop? i always have to take the charger in or out for it to work ... -.-

Apple Portables: Troubleshooting MagSafe adapters
http://support.apple.com/kb/TS1713

Is there a driver to let a ps2 keyboard plugged in with a usb connector work on my macbook pro 13inch

is there a driver to let a ps2 keyboard plugged in with a usb connector work on my macbook pro 13inch?
I know there are more threads about this subject but none was really an answer.
I got a keyboard (brand medion) with a ps2 connector. i wanted it to connect to my macbook so i bought an ps2 to usb connecter.
wile connected with my macbook the keyboard leds flash one time like they do when you put it in a ps2. but after this just doesn' t work
I think i might miss a driver or its just turned of somwhere in the system. an previous answer was said something about a safe reboot and a lot of codes but thats to hard for me.
so any good solutions????

I've never found a PS2 to USB adapter that worked, or IIRC I've never found one at all. I have USB TO PS2 but not the other way. Just go out and buy a new keyboard. PS2 is so late 90s/early 2000s

Help on how to fix macbook pro 13inch 2010 (cpu 1 caller 0x47f5ad)?

help on how to fix macbook pro 13inch 2010
Hi, I need some peoples help on fixing my laptop. I have a macbook pro 13 inch 2010 model, and it refuses to boot into either osx or windows. Every time I prevoiusly treid to boot into mac osx I got this error "panic (cpu 1 caller 0x47f5ad)". there is an image below. and when I had treid to boot into windows (bootcamp) I got this error "A disk read error occured Press Ctrl+Alt+Del to restart". I have treid to restart the computer and gotten both these errors agian. The strange things is this deosn't always happen, sometimes I don't get any errors, and it just has the apple logo whith the spinning loading thing happening below (I left this for an hour and it still kept spinning, and never loaded). Other times it just show white whith no errors but never loads, sometime it lets me alt to select which os to boot into (nether work), but other times it just freezes and shows a mouse cursor on the white background. it's not consistent.
Most recently it has a flashing folder on a white background. I treid inserting my osx disc and went into disc utility but it doesn't detect my hardrive. It may be a faulty hardrive or sata cable but I dont know (I have links below). I was recently (well for the first time), defragmenting my windows partition, it hit temparatures of 80-85C, and stayed at that for several hours throughout the defragmentation, would this have damaged it?
I have scoured the internet and found many people whith very similar problems to me but none whith the same, and A lot of people saying that if you get the error you should just use a time machine backup, the thing is I don't have a time machine backup. The internal hardrive I am currently using on my laptop is a seagate 640gb 5400rpm (it's not an apple harddrive). every thing else it standard, standard ram and no overclocking, I was running 10.6.8 snow leopard, and windows xp profesional 32bit (split 320gb each, whith about 10gb spare on each parttion).
It would be greatly appreiciated If any one could shed some light on what I should do. I need the laptop working whithin the week (for my tafe work), but If I have to reinstall the OS's and programs it could take a long0I have a lot of programs and that could take a month. not to mention The fact that the hardrive might be completly fine and it's just a faulty sata connection. but then would I still be getting an error if thats all thats wrong?. and if it is just the error is there anyway I can fix it whitout doing a fresh install, there a error reading document blow but I cannot make heads or tails of it. I also have almost no money to afford getting it fixed.
also one last thing, I stupitidely inserted my mac osx disc 95% of the way into my macs slot loading drive when it was powered down (off). when I turned it on it sucked it in fine, but would that have caused any damage to the disc or laptop (I cannot eject the disc to check)
I have images of many of the things I described below. So any suggestions.
I have also posted this on several other websiets if that helps)
Photos
http://www.flickr.com/photos/100089102@N08/
"panic (cpu 1 caller 0x47f5ad)" error issues
http://forums.macrumors.com/showthread.php?t=1177233
http://reviews.cnet.com/8301-13727_7-10344626-263.html?tag=mfiredir
https://discussions.apple.com/thread/3256029?start=0&tstart=0
http://www.mac-forums.com/forums/switcher-hangout/258078-macbook-pro-will-not-st art-up.html
https://discussions.apple.com/thread/3965618?start=0&tstart=0
Hardrive issues
https://discussions.apple.com/thread/4225754?start=0&tstart=0
http://www.mac-forums.com/forums/other-hardware-peripherals/242064-hard-drive-no t-showing-up-disc-utility.html
How to read errors
http://developer.apple.com/library/mac/#technotes/tn2063/_index.html
other websites
http://au.answers.yahoo.com/question/index?qid=20130808212838AAYDeTk
http://forums.macrumors.com/showthread.php?p=17706929#post17706929

The problem may be that your macbook is'nt set to 'mirror image' if you go into settings, onto 'displays' there should be an option within, once youre connected, to 'mirror image' if you check this box, then the problem should be sorted, if not then maybe a dodgy cable or adapter.

Dropped my Macbook Pro 13inch

Hello,
I dropped my macbook pro 13inch-unibody and I have a dent in the corner of my screen. it doesn't affect the actualy visual part of the screen but I would like to undent it. Also, I have some scratches on the bottom of the notebook and would like to get rid of it as well. Is there any way to do that?

If you want to get rid of the scratches and dents you need to take it to an Apple Store or AASP and have the damaged parts replaced. It won't be inexpensive but it shouldn't cost anything for a price quote. My suggestion is to begin taking better care of it and also to get some protective covers.
Roger

Can the MacBook Pro 13inch mid 2008 use 1333Mhz RAM?

Can the MacBook Pro 13inch mid 2008 use 1333Mhz RAM? I just bought another 4 GB of ram, but it isn't 1066Mhz like the other stick. Everything works and passes a memory test but the MacBook does not wake from sleep. It only does this when the new RAM is inserted. I have tried it on its own and with the old memory and it only does it with this faster memory installed. It says its at the same speed as any slower RAM installed.

So 1066Mhz is the only ram that works.? As in there isn't anything I need to change or the ram just isn't working correctly? I was always under the impression that ram always clocked it self down to the slowest module installed, which this one does, it just does let the Mac come out of sleep..
There may be some 1333MHz RAM that would work in your machine, but it's not what you bought, and the only way to find it would be to keep buying more and more modules until you found one that worked. It is always safest to buy RAM with the right specs for your machine from a known-reliable, Mac-savvy vendor that offers a lifetime warranty and no "restocking fee" if you get a module that seems to be bad or go bad.
RAM that is faster than spec will often clock itself down, not to the speed of the slowest module installed, but to the speed the machine's architecture is designed to use. But it doesn't always work — not even when it appears at first to work. And there's never any benefit to installing faster-than-spec RAM, because it never speeds up the machine's operation at all.

Facebook(wall post) location button not working in mountain lion macbook pro 13inch in upper right button

facebook(wall post) location button not working in mountain lion macbook pro 13inch in upper right button

No third party applications installed; no gestures changed. It just starts acting up like I described a few times a day. I'll be browsing the internet and go to switch desktops and it suddenly doesn't work.

I just bought a Macbook Pro 13inch and the download speed is super slow! Why??

I bought a Macbook Pro 13inch 750gb laptop and i'm trying to download the updates it say's I need and it is taking way longer than I've ever had a computer download, why is it so slow? Is something wrong with my new laptop? My frist Macbook Pro from 2007 is faster than this crap! What's up with that?
I even have it connected through ethernet to the internet and it say's download time: 7 to 8 hours and never gets anywhere, i've been trying all day

We recently changed our internet because it was previously too slow but this one seems even worse. It's progressively slowing down more and more.
Example: When watching Netflix on my Wii and surfing the web via Computer the Nexflix will go down or have to reload. I'm going to have to call Centurylink because this is rediculous. Maybe it's the area our house is located? Or I hope nobody has cracked my internet and is using it without permission...
I'm glad to know it's not my new Mac. (Because i'd have a hissy fit if it was.)
But I still feel like my previous Macbook Pro was a tad faster, which doesn't make sense, right...?

How to install W.7 on 2011 Macbook pro which doesn't come with bootcamp dvd?

how to install W.7 on 2011 Macbook pro which doesn't come with bootcamp dvd?

Use the Boot Camp Assistant in the /Applications/Utilities/ folder to put the Boot Camp drivers onto an optical disk or USB thumbdrive.
(80603)

My macbook pro 13inch doesn't recognize Huawei E303C 3g dongle what should plz suggest?

Similar Messages

Maybe you are looking for