My MacBook Pro, does not start after pushing start button. The side bar starts and stops at half way.

Hy myneck,
Happy Holidays! The resource below may provide some steps to try if your MacBook Pro won't start.
Troubleshooting: My computer won't turn on - Apple Support
http://support.apple.com/en-us/TS1367
This article discusses what to do if your Mac won't turn on. To differentiate this from a display issue, be sure that when you press the power button:
You don't hear a startup chime.
You don't hear any fan or drive noise.
There is no video on your built-in or external display
If your computer has power but doesn't display any video, it may have one or more of these similar symptoms when you press the power button:
You may hear a startup chime.
You may hear fan or drive noise.
You may see a light from the Sleep LED (if your Mac has one).
Pressing the Caps Lock key on the keyboard causes it to light.
If any of these display-related conditions occur, see Troubleshooting: My computer has no video instead. Otherwise, continue with this article.
If your computer won't turn on, try each of these steps:
Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter.
Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
MacBook Pro: How to remove or install memory
MacBook: How to remove or install memory
Mac Pro: How to remove or install memory
Mac mini: How to remove or install memory
iMac (27-inch, Late 2012): Installing or replacing memory
iMac: How to remove or install memory
Reset the SMC.
If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
I hope this information helps ....
- Judy

Similar Messages

After updating to Lion my macbook pro does not startup, it is stuck to the grey apple screen

After updating to Lion my macbook pro does not startup, it is stuck to the grey apple screen

See Here for Troubleshooting Grey Screen on Startup:
http://support.apple.com/kb/TS2570

Macbook Pro does not boot after replacing HD

I have a Macbook Pro that I bought in early 2007. It came with 10.4, and I have since upgraded to 10.5, and then 10.6.
I decided to upgrade the original internal HD to a 500GB HD. I used Time Machine to back up the orignal HD.
After performing the surgery, I turned on the MBP with my Snow Leopard install DVD. After a while reading the DVD, the MBP spits out the DVD and displays the folder with the question mark.
I then create a recovery disk on an 8GB Flash Drive, using the Snow Leopard install disk as a source. I plug in the drive, start the MBP and hold down the 'option' key. I get a grey screen with a mouse cursor, but no drive icons.
I'm puzzled. The install DVD seems to look fine on other computers, as does the flash drive. I'm planning on getting a HD enclosure and cloning my old drive to the new drive, but does anyone have any suggestions as to what's gone wrong?
Thanks!

Dale Weisshaar wrote:
After performing the surgery, I turned on the MBP with my Snow Leopard install DVD. After a while reading the DVD, the MBP spits out the DVD and displays the folder with the question mark.
Are you holding down the small case letter c the whole time. Keep holding it till the install screen comes up.
Did that, still tried to boot (sounded like the drive was reading), and still got the folder with the question mark, and the DVD was ejected.
Also, it has to be a retail disk of Snow Leopard. A machine specific disk that came with another Mac will not work. You need the universal copy.
Right, my MBP came with 10.4 originally, so this was a retail disk.

Macbook pro does not boot after enabling Filevault

macbook pro with OS 10.9.2 : after enabling encryption ran in to a problem and did not startup.
did the followings:
- loaded to recovery mode: command-R
- disk utility- verify disk> repair disk
- tried to reinstall OS : did not work
- re-partitioned the hard drive
- tried to install it from bootable Mac os installation : it worked but after running the software update it did not start up again....
- sent the mac to repair store to replace the hard drive with SSD hard : they setup the hard with mac os 10.9.5
- installed all the software update
- enabled the file-vault " this time it finished the encryption but when started up and tried to login with user account it got frozen and did not work and so on ...
- again tried to go to recovery mod and repair the hard and reinstall OS but it did not install the OS
- had to again repartition the hard ...
PS: the macbook loads fine with the OS on External hard disk .
this is really frustrating, can somebody tell me what's wrong with this mac why this issue happens after enabling encryption and why the issue is not gone even after reformatting the partition...

I finally fixed the issue myself
The macbook had a RAM issue: Replaced the RAM and it is fine now.

Macbook pro does not boot after upgrading ram

I have a macbook pro late 2011 which runs with mavericks operating system . I have tried to upgrade my macbook to 8Gb. Macbook does not boot when the two ram slots are filled with 4GB ram but runs well when the slots are filled with 2GB ram. When i try them individually with one slot of 2GB ram and another slot with 4GB they run perfectly which shows status ok in the RAM info. What could be the problem .

Around here, most of us recommend only Crucial and OWC for RAM because it's guaranteed to work with Macs and it's what most of us have. If I were you, I would return the RAM and look at purchasing RAM from either Crucial or OWC. If you can't get their RAM to work then you'll know that there's some trouble with your actual slots.
Good luck,
Clinton
MacBook Pro (15-inch Late 2011), OS Mavericks 10.9.4, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display

The sound on my Macbook Pro does not work.

The sound on my Macbook Pro does not work. When we press the volume buttons, the sound icon pops up, but the bar is full with a small "Does not work" circle below it, and nothing happens when I hit volume up or done. I went into system preferences, but there aren't any options there that I can see to change it.

"Unfortunately, it doesn't provide any help for a MacBook Pro, other than indicating to call Apple Support" (sic).
Au contraire. TS1574's title and affected products are thusly:
"Troubleshooting issues with no audio from built-in speakers on Macs
Products Affected Mac mini, MacBook, MacBook Pro, iMac"
As a result, the instructions of the article are relevant. To be sure, follow those steps, the last of which is to contact Apple.
So, by way of reminder, here are the steps to troubleshoot the audio on your MacBook Pro. There is no red light, so the port is likely fine. Headphones work, so clearly your sound card is fine.
1. Ensure an incorrect version of OS X is not installed. If one is, then reinstall or erase/install after backing up your data.
2. Remove any external audio devices from USB, firewire, etc.
3. Open Sys Prefs > Sound > Output
If Internal Speakers is listed, select it and test again.
If Digital Out is listed, confirm again that all external audio devices and cables have been removed.
If mute is selected, unselect it.
If the volume slider is low, raise the volume.
If the above simply doesn't fix it, the issue may be a corrupted plist. Apple Support might be able to help troubleshoot the issue further, per the last step of TS1574.
I hope it gets resolved for you. Good luck.

Can someone tell me why my Macbook Pro does not have IDVD?

Can anyone tell me why my $$$$ Macbook Pro does not have IDVD? I when to do an IMovie and media shared to IDVD and me computer could not locate. I thought that all Macs have IDVD. Maybe they forgot it. I did a search in applications and it said it had no file. I uploaded the newest IDVD and it told me that I needed IDVD it was not on my computer. Something is wrong with this

iDVD has not been available with iLife since the upgrade to Lion. It is no longer in production. Try purchasing one of the older iLife '11 boxed set DVDs on Google or eBay.

New Macbook Pro does not start up after updating...HELP!!!

Hi,
My new Macbook Pro does not start up after it got updated. The first time I used it, it was perfect. I updated it and restarted it when it told me to but it doesn't boot. It shows an apple and a spinning circle when it turns on but that's it.
Can somebody please help me?

You should probably post your question in the MacBook Pro discussions:
http://discussions.apple.com/category.jspa?categoryID=190

HT3669 My macbook pro does not print through my PC to my EPSON RX 500 after loading OS X 10.7.4. It shows on the print queue "error" However, it will print if I directly connect my laptop to this printer via the USB connection. Any ideas?

My macbook pro does not print through my PC to my EPSON RX 500 after loading OS X 10.7.4. It shows on the print queue "error" However, it will print if I directly connect my laptop to this printer via the USB connection. Any ideas?

It's all about setting up what ever version of windows you have running on your pc to share the printer. If you still get stuck post in a windows forum for help.

My MacBook Pro does not appear to have power.

I have a 13" MacBook Pro, Mac OS X (10.6.3) that will not turn on regardless of what I do. With the MagSafe Power Adapter connected, its indicator light is green. When I press the battery indicator button, it indicates the battery is fully charged. The sleep light does not blink. After disconnecting the MagSafe Power Adapter, when I press the battery indicator button, it indicates the battery has no life (the first light doesn't even blink).
The electrical power outlet has power. When I use a new second MagSafe Adapter, my MacBook has the same symptoms and won't turn on.
My MacBook Pro does not have a user removal battery. I've tried all the recommended resets.
Any thoughts would be greatly appreciated.

10.6.3 is pretty old for this machine but shouldn't create this problem.
So you did this:
Reset SMC
http://support.apple.com/en-us/HT201295
If no joy then:
Try a hard reset. Disconnect the battery (take the bottom off and unplug, use your fingernail.) and power adapter. Press the power button for 1 minute. Let the computer sit for 5 minutes, Reconnect and try to start up.
No? - Go through the same procedure and try to start without the battery connected.
The addendum to this would be to try a known good battery.

My MacBook pro did not restart after the software update

My MacBook pro did not restart after the software update

Kappy wrote:
Now, were I a mindreader this wouldn't be an issue, but unfortunately, I'm not.
WHAT??? Now that's a disappointment! I was sure the all-seeing, all-knowing Prof. Kappy would instantly discover the problem thru time and space....
Ok, back to the issue at hand, the Prof. is right. In none of the OP's participation, nor in any of his choir of followers save mommy power is there the least hint of what Apple product is failing. While y'all get a move on and disgorge the details, may want to try a Safe Boot. Hold down the Shift key prior to the startup chime and wait awhile. IF it starts, then it means you have some third-party software that's causing the problem. Else there's a strong probability a complete reinstall will occur in your near future.
In the future and in spite of what some purists may say, be sure to service the system disk BEFORE patching. By "service" I mean booting up the Mac using your Install DVD (Snow Leopard or priors) or booting in Recovery Mode (Command R, in the Lions and successors), running the Disk Utility found in that mode and doing a Repair Disk and Repair Disk Permissions. Until NO errors show up. Cause patching up an already damaged system will only make things worse.

My MacBook Pro does not recognize my Android Incredible 2 cell phone and I can not transfer my photos from my cell phoen to my Mac. I was able to do this in the past, but can no longer do so. i havenot upgraded to any new software.

My MacBook Pro does not recognize my Android Incrdible 2 cell phone and therefore I can not transfer any photos from my cell phone to my Mac. I was able to do this in the past, but can not do so now. I have not upgraded to any new software. My USB cable is plugged in properly and I just get an error message -- "No Android Device Found". What could be the problem?

I had the same issue with the Galaxy S4 trying to see what the hype was about and was my first and last android phone. With that being said unfortunately it is a hit or miss with the Mac recognizing an android device or not. It worked perfectly fine the first time around and then it stopped working for no apparent reason. Through trial and error nothing I did solved the issue. I did however plug it in my Mac and left it connected for about 30-40 min to charge for a bit and all of the sudden it recognizes the phone. So I just launched Android File Transfer and everything else became fluid after that. I have no explanation as to why it happened that way, but what I gathered from this is maybe you just have to let it sit for a minute while plugged in before the Mac recognizes it, after all they are opposing software. On a side note this is why I will always be an apple user, Iphones and the like never have this problem

MacBook Pro will not boot after software update

MacBook Pro will not boot after doing an Apple Software Update (of course they will not help you). MONEY, MONEY, MONEY is the name of the game. They can cause your computer to crash and still charge you!
Does anyone have an answer to why my computer is showing a little gear spinning for hours? I have tried several things with NO luck.
Thanks-

Run through the list of fixes here
Step by Step to fix your Mac

My Adobe acrobat X Pro does not respond after a minute I open up a pdf file

I recently have installed Adobe Master Suite CS6 Collection. My Adobe acrobat X Pro does not respond after a minute I open up a pdf file. This happens every time when open a new pdf file. My operating system is Windows 7 pro ( Lenovo-64 bits). Any suggestions would be appreciated !!

Mylenium
Thank you for the suggestions.
I checked the WIndows log files. It reported the following error:
The program Acrobat.exe version 10.1.1.33 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 4770
Start Time: 01d0079a09bba381
Termination Time: 13
Application Path: C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\Acrobat.exe
Report Id: 4f145db6-7391-11e4-8fc1-005056c00001
I ran for the memory diagnostics as it showed the error with video card error. My NVDIA graphics card is not working properly. Do you think that could be a problem?I am running on Windows 7 64 bit computer. It also complains about the incompatibility with 64 bits.
Thank you.

Disk burning device of my macbook pro does not work

hi
the disk burning device of my macbook pro does not work from last night!!
it don't eject and don't pick CD!!! it is off!!!!!
in my macbook pro info see this messege:No disc burning device was found. If the device is external, make sure it’s connected and turned on.
I reset my System management Controller:http://support.apple.com/kb/HT3964 But it don't right!!!!
and i can not go to a apple support!!!! i'm in dubai!!!!! is here an apple support???
it don't have any other way to solve this problem???????

Try doing a Parameter RAM reset - hold down command/option/p/r keys at start up and wait for three chimes before releasing the keys.
If the hardware has filed there's nothing anyone here can do to help you ...

My MacBook Pro, does not start after pushing start button. The side bar starts and stops at half way.

Similar Messages

Maybe you are looking for