My MacBook Pro is not able to detect Toshiba LCD TV using HDMI Cable

Hello,
I am recently having an issue of connecting my MacBook Pro with Toshiba LCD 32 Inch i tried many troubleshooting scenarios but nothing came up on my LCD,
My Mac OS 10.6.6 with the latest updates from Apple, i tried to connect my Mac to Sony Pravia LCD Screen and it's work fine but not the case in TOSHIBA !,
Please advise me if it's something related to my TV.
Waiting reply from technical,

Hello Dear,
Thanks for response,
I check the TV Manual and it's support the "Extended display identification data (EDID)" and i already connect my PS3 on the TV using HDMI Cable, but when i connect the MacBook Pro screen flashed and nothing came up on the TV and this why i am trying to understand is it Mac issue or TV one,
Please review the following i copy it from the TV Manual and advise me,
"Connecting an HDMI or a DVI device
The HDMI input on your TV receives digital audio
and uncompressed digital video from an HDMI
device and uncompressed digital video from a
DVI device.
This input is designed to accept HDCP
programme material in digital from CEA-861-D
compliant consumer electronic devices (such as
a set top box and DVD player with HDMI and DVI
output).
The HDMI input is designed for best performance
with 1080i (50 Hz/60 Hz) and 1080p (24/50/60
Hz) high-definition video signals, but will also
accept and display 480i, 480p, 576i, 576p, and
720p (50Hz/60 Hz (60 Hz: except for E-EDID))
and VGA (VESA 640 × 480 @ 60/72/75 Hz)
signals.
• HDMI: High-Definition Multimedia Interface
• DVI: Digital Video Interface
• HDCP: High-bandwidth Digital Content
Protection
• CEA-861-D compliance covers the
transmission of uncompressed digital video
with high-bandwidth digital content protection,
which is being standardized for reception of
high-definition video signals. Because this is
an evolving technology, it is possible that some
devices may not operate properly with the TV.
• E-EDID: Enhanced-Extended Display
Identification
• Acceptable PC signal format:
S-VGA: VESA 800 5 600 @ 56/60/72/75 Hz
XGA: VESA 1024 5 768 @ 60/70/75 Hz
W-XGA: VESA 1280 5 768 @ 60/75 Hz
W-XGA: VESA 1360 5 768 @ 60 Hz
S-XGA: VESA 1280 5 1024 @ 60/75 Hz
However, these signal formats are converted to
match the number of pixels of the LCD panel.
Therefore, the TV may not display small text
properly.
If you connect this unit to your PC, the
compressed image is displayed in S-XGA mode,
therefore the picture quality may deteriorate and
characters may not be read.
• L-PCM: Linear-Pulse Code Modulation"

Similar Messages

HT204409 I have a MacBook Pro and not able to connect to Internet? PLEASE help!

I have a MacBook Pro and not able to connect to Internet. I have other HP comp and iPad and am able to connect. I have contacted AppleCare....they said disconnect router and leave unplugged for an hour, which I did...still no connection. Any suggestions? Thanks!

Call Apple Care back & tell them their suggestion did not work.
Solution may be found if you search in the "More Like This" section over in the right column.

Macbook Pro stops being able to detect wifi network

This is bugging me - over the course of the last 24 hours my relatively new (ie < 6 months old) Macbook Pro has started to drop its wireless signal. I can be sitting with both the new Macbook Pro and an old Macbook (circa 2006) both connected to my network via Time Capsule with both of them working fine, only for the Macbook Pro to suddenly seize up and lose the wireless signal. Hours later it works again, as if by magic! The strange thing is the Menu bar shows that I am connected to my network, but Airport Utility cannot see either the Time Capsule or the Airport Express on my network
Are there are diagnostic tools or terminal commands/logs I can use to try an pinpoint what or where the problem is? Any advice gratefully received
I intend on taking this Macbook in for servicing but I'd like some evidence first otherwise I'll look like a bigger bozo

Open System Preferences / Network / Wi-Fi / Advanced... and delete the unwanted network from the list of Preferred's. May want to uncheck the Remember networks.... option as well, to prevent auto-join.
If it insists to join the other network, it's probably cause the signal is stronger and the Wi-Fi protocols indicate a search for the strongest. Once you click OK, you can check the Ask to join networks option on the previous page, so at least you'll get asked (every time) and have some say in the matter.

13" MacBook Pro (Early 2011) doesn't detect display over mini DisplayPort HDMI adapter in Mountain Lion 10.8.2

Hi to all.
I have a problem connecting external display (Dell U2311H) to my 13" MacBook Pro (Early 2011).
I use Tecklink Mini DasplayPort to HDMI adapter (http://www.techlink.uk.com/products/wires_cables/wiresmedia/wiresmedia_media/wir esmedia_mini_displayport_plug_to_hdmi_plug), but since U2311H doesn't have HDMI input, I also use Manhattan DisplayPort to HDMI Adapter (http://www.manhattan-products.com/en-US/products/8101-displayport-adapter).
And nothing.
The display is not detected, no picture or even external monitor presence at all.
I even reset PRAM, and installed 10.8.2 Supplementary update.
I also plugged and unplugged all I could, with no luck.
As I can see on Apple discussion, it is a common problem with 2011 MacBook Pro's.
It seems like the problem is in Thundebolt port, it somehow does not work properly.
If anyone has solved such ploblem, please let me know.

In reply to my own post have to say appologies to Apple whose Thunderbold port I used to blame.
Shame on me)
So, what was my problem?
Guess what?
Manhattan DisplayPort to HDMI Adapter !
The point is it's actually do only what it said to do, converts DP to HDMI.
But I for some reason thought it can be used vice versa, to be HDMI to DP converter))
I was wrong.
I bought new one HDMI to DVI adapter and now I HAVE external display!
Thunderbolt works like a charm.
So I'm very satisfied now.

My Macbook Pro will not install/restart for updates when I use Software Update

So when I go into System Preferences and go to Software Update, I click the Check Now Button. It looks for available updates, and gives me a box that says "Software updates for your computer are ready to be installed. Do you want to install them now?" with options to "Show Details", "Not Now", and "Install and Restart". However, when I hit the install and restart button, after hitting a few confirmations, the app simply logs me out, but doesn't restart the computer. When I restart the computer from the Log In screen, the computer reboots without installing any of the updates. I'm on Snow Leopard, is that why updates aren't installing? Am I going to have to manually download all of the updates, or at least that updates that are compatible with Snow Leopard?

There are no updates for Snow Leopard except to Mountain Lion.
Upgrading to Snow Leopard, Lion, or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s MobileMe service; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer)
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer)
         3. MacBook Pro (Mid/Late 2007 or newer)
         4. MacBook Air (Late 2008 or newer)
         5. Mac mini (Early 2009 or newer)
         6. Mac Pro (Early 2008 or newer)
         7. Xserve (Early 2009)
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
     Am I eligible for the free upgrade?
         See Apple - Free OS X Mountain Lion upgrade Program.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

How do I connect my MacBook Pro to a monitor or tv via a Thunderbolt to hdmi cable?

I have an early 2011 model MacBook Pro 15in. I purchased this cord to use the Macbook with my tv and my monitor. I've tried the detect display option, I've also tried different hdmi ports on my tv but it won't display for whatever reason.
http://www.amazon.com/Mini-DisplayPort-HDMI-Adapter-Cable/dp/B003OC6LWM/ref=sr_1 _2?ie=UTF8&qid=1324665120&sr=8-2

This is one available at the Apple store:
http://store.apple.com/us/product/H1824ZM/A/Moshi_Mini_DisplayPort_to_HDMI_Adapt er
Read over you TV users manual. There may be some setting you have to perform at that end.
Ciao.

MacBook Pro will not detect external speakers, even though it did yesterday

I have a MacBook Pro and it is connected to my HDTV via an HDMI cable and adapter. Yesterday my laptop was able to detect the external speakers in the TV and sound was coming out of my tv from my mac. But today my mac isn't detecting the external speakers and no sound is coming out of my tv. I've tried turning things on and off in multiple ways. Unplugging and replugging the HDMI cable/ adapter. Both of the cables are plugged in properly. Whenever I go to System Preferences>Sound>Output my external speakers aren't showing up. This is so annoying, help me please! Thanks.

I had this problem, too for my 2014 MBP. The output speakers did not show up when I tried to connect through the HDMI port. However, the output speakers did show up when I used an HDMI to Thunderbolt cable.

Macbook pro is not working, only mouse!

How can help me my macbook pro is not working properly!
I can only use the mouse. What is going on and can tell some one what i can do!
Thank you already

Hi executive1961,
Welcome to the Support Communities!
The articles below may be able to help you with this issue.
Click on the link to see more details and screenshots.
Portables and Magic Trackpad: Jumpy or erratic trackpad operation
http://support.apple.com/kb/TS1449
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
About NVRAM and PRAM
http://support.apple.com/kb/HT1379
Cheers,
- Judy

I have a MacBook Pro. My mac can detect wifi. But will not connect. I did get connected vis TCP/IP settings but I can't connect to any wifi anywhere. Network diagnostic has a green light for wi-fi and wi-fi settings. Red light for the rest.

I have a MacBook Pro. My mac can detect wifi. But will not connect anywhere. I did get connected via TCP/IP settings but I can't connect to any wifi anywhere. Network diagnostic has a green light for wi-fi and wi-fi settings. Red light for the rest. (Network settings, ISP, Internet and server.)

Hello NotAppleSavy,
Thanks for the question. After reviewing your post, it sounds like the computer wont connect to networks. I see you have used network diagnostic. I would recommend that you read this article, there are a lot of other things you can do in this article that may be able to help you resolve or isolate the issue.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Having problems connecting a late 2011 Macbook Pro 2.2ghz i7 to a Sony KDL-32L5000 using a display miniport to DVI adapter (DVI to VGA cord). The TV is not detecting the macbook. Anyone have this problem?

Having problems connecting a late 2011 Macbook Pro 2.2ghz i7 to a Sony KDL-32L5000 using a display miniport to DVI adapter (DVI to VGA cord). The TV is not detecting the macbook. Anyone have this problem?

You really have to mess with the resoluton, espescially the refresh rate, as it varies from projector to projector, monitor to monitor. Even within the same brand! Because so many manufacturers are trying so many different things to become the next cool kid on the block, and the way the formats are being configured that's now part of the game.
That's why so many professionally produced corporate shows hire a dedicated projectionist for the video presentations. Too many bugs in the honey.
Refresh & sesolution are the first things to look at.
Just so you know that colors in PowerPoint PC, and PowerPoint Mac, don't exactly match... go figure.
I forgot to mention another thing, sometimes it's the projector that needs to be tweaked.

My MacBook Pro does not recognize my Android Incredible 2 cell phone and I can not transfer my photos from my cell phoen to my Mac. I was able to do this in the past, but can no longer do so. i havenot upgraded to any new software.

My MacBook Pro does not recognize my Android Incrdible 2 cell phone and therefore I can not transfer any photos from my cell phone to my Mac. I was able to do this in the past, but can not do so now. I have not upgraded to any new software. My USB cable is plugged in properly and I just get an error message -- "No Android Device Found". What could be the problem?

I had the same issue with the Galaxy S4 trying to see what the hype was about and was my first and last android phone. With that being said unfortunately it is a hit or miss with the Mac recognizing an android device or not. It worked perfectly fine the first time around and then it stopped working for no apparent reason. Through trial and error nothing I did solved the issue. I did however plug it in my Mac and left it connected for about 30-40 min to charge for a bit and all of the sudden it recognizes the phone. So I just launched Android File Transfer and everything else became fluid after that. I have no explanation as to why it happened that way, but what I gathered from this is maybe you just have to let it sit for a minute while plugged in before the Mac recognizes it, after all they are opposing software. On a side note this is why I will always be an apple user, Iphones and the like never have this problem

MacBook Pro will not detect displays. . .

I found this link, and it best discribes what is happening on my macbook. I have a thunderbolt to cdmi cord that I use on my TV. Then all of a sudden, it just stopped working. . . My screen flashes black for about a second like its about to connect to my TV, but then nothing happens. Please help. . .
I have a MacBook Pro 13 Mid-2012 running 10.10.1
Here's the link i found my macbook pro does not detect external display anymore

Just one bit of data...
I don't know what the deal is, but I had a similar situation. (It all worked fine, then I upgraded to 10.9.5 and it didn't work any more, but then I upgraded to 10.10 and then it worked. Then it wouldn't. but once in a while it would. It made no sense. ) In the end I got a different (more expensive) adapter and cable and everything works properly.

My macbook pro will not detect any external monitors

My macbook pro will not detect any external monitors, worked 'once' when connect to a TV.
Have read a lot of web comments, most not very usefull.

Hi a,
Check the setting in Sys Prefs > Displays.
Try a different adapter and/or cable.

HT1338 the Macbook Pro would not even detect the external monitor.

My Macbook pro will not connect to an external monitor after moving it. It has been running on this same monitor for 8 months. I switched to a new Desk last night, after hooking it up, the Macbook Pro would not even detect the external monitor. It was only showing the Macs monitor in Display. It did not even have where you could "Detect Display" available. Is there an update that I may have missed. I have tested all the Monitor connections with another laptop they all work.

finally I would like to know if my computer falls under
http://support.apple.com/kb/TS2377
If nothing displays but you hear normal startup sounds, then it's possible this is a video issue, and you should take it to an Apple store or AASP.

I have an Epson printer on a Wifi network. Windows 7 desktop and and HP Win 7 laptop (my wifes) print to it just fine. My MacBook Pro running Yosemite won't detect it, and I have the latest driver installed. No problem when I had a Canon...

I have an Epson printer on a Wifi network. Windows 7 desktop is running the network, and my wife's HP Win 7 laptop prints to it just fine. My MacBook Pro running Yosemite won't detect it, and I do have the latest driver installed. I didn't have a problem when I had a Canon Pixma on the network, but when I replaced it with the Epson nothing seems to work. I go to add a printer to the queue and only the FAX function of the printer shows up - not the WS-4530 print function. Does anyone out there have any suggestions? Please??? :-)

Hi Kelly,
As someone who has to print from my Mac to a networked printer at home all the time, I can certainly understand how frustrating it must be to have that fail to perform as expected. Let's see if we can get you up and running.
I would suggest that you troubleshoot using the steps in this article -
OS X Yosemite: Printing troubleshooting
Start with the section titled Check the network.
Thanks for using Apple Support Communities.
Sincerely,
Brett L

My MacBook Pro is not able to detect Toshiba LCD TV using HDMI Cable

Similar Messages

Maybe you are looking for