My MacBook Pro is not switching on and my charging light is very dim green

Hey ! My MacBook Pro is not switching on. I was trying to charge my iPhone through the lead attached to the MacBook. I suppose the iPhone charging lead might not be a original. Hence it kept saying that this accessory will not work. So I took it out. As soon as I did that my mac switched off and it would not switch on again. The charger light went really dim green. It usable is more brighter. I've waited for a while. It's not switching on. I was trying to do smc reset but I suppose if I'm doing it right it's not working. I was reading online and I didn't find much help. I live in Pakistan so I can't go to apple store. Please tell me a solution !!?

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

Similar Messages

  • My macbook pro will not turn on and the charger is not lighting up

    please help!! my macbook pro will not turn on at all, when i plug in the charger it will not light up at all, it suddenly shut down when i was using it.

    Is there any charge left in the battery?
    Press the button on the left side, near the front edge. If no green lights appear, battery is flat. And if the power brick ain't workin' (by virtue of its pilot light not glowing), then it will remain flat and the computer will not power up. If this is the case, maybe try with another power brick of similar size and see if it charges.
    Else the logic board is toast and pitbull's on the money.
    Either case, my gypsy crystal ball forsees a trip to an Apple Store or a Service Provider in your future...

  • MacBook Pro won't power up and no charger light after USB device was plugged in

    Hey guys,
    I have a late 2012 MacBook Pro 13" with a water damage that didn't cause any troubles (until now).
    A couple of days ago I plugged in a Samsung tablet to recharge it's battery on my MacBook. At the same time my screen went black and the MacBook powered off. No usual forced low-battery-shutdown or anything, it just died. From then on the charger light didn't work and I wasn't able to start the Computer anymore. From time to time the charger light was flickering a little bit but way darker than the usual luminosity. The Laptop had a water damage about a year ago, which didn't cause any trouble. I dried and aired it for a couple of days and didn't switch it on during that time. It worked normal for the rest of the year but now I think the mainboard is ******. Please tell me something different, or the truth even though it might be shattering.
    Just in case it might be important. I was backpacking in Sri Lanka when the incident took place. It didn't seem like there was an overvoltage or anything like that though...
    Thank you guys and have a good day.
    Alex

    Liquid damage is progressive.
    Best action that can be done is to take the computer to the Apple store to have it checked out
    and repaired if possible and affordable.
    Best.

  • My 13.3" macbook pro will not power up.The battery indicator light does not come on.The Mag safe charging light flickers green and red dimly.I had a cell phone connected to the USB port.

    My 13.3" macbook pro will not power up.The battery indicator light does not come on.The Mag safe charging light flickers green and red dimly.I had a cell phone connected to the USB port.

    This didn't work for me, so I did a bit of searching and TONS of pages later in google, I found an answer. Here are the steps for people who also were in my situation:
    1. Take off bottom case
    2. Unplug battery - blurry image here: http://i.ytimg.com/vi/03cC79r5Dx4/0.jpg
    3. Press and hold power button for 5 seconds
    4. Plug a charger in, and it should start booting up
    5. After shutting down again, reconnect the battery and close the case up
    6. It works! (hopefully, if you guys had the same situation I did)

  • Macbook Pro will not shut down AND other issues...

    Macbook Pro will not shut down. Not using the POWER button, not using control/alt/command/esc, not using force quit, and obviously not by selecting Sleep or Shut down from the Apple menu.
    Force quit will not even pop up when selected.
    Top row keys do not work either, have gone into settings and switched them to F keys and back again, no luck.
    iPhoto will not import photos and will not shut down, gives me a message stating it is importing photos (nothing is connected to computer though). Baffling.
    HELP! Computer is only a month old
    Thank you everyone xx

    Please make a Genius Appointment and take it in for service.

  • Macbook pro 2013 suddenly turn off and wheh charged its define only grren light and dont turn on.

    Hi Friends..
    I have mac book pro 2013. Today when I started its got suddenly turn off and also not turn on. The mac does not charged also not turn on. charger define only green light. I reset SMC but its not work.
    Please If any one have Idea.

    Hi Dipang,
    If your MacBook Pro will not turn on, you may want to follow the steps in this article to try to get it up and running again -
    OS X Mavericks: If your computer won’t turn on
    http://support.apple.com/kb/PH13978
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • My mid 2009, 17inch Macbook Pro will not switch on unless it is physically hot. I have to heat it up with a hairdryer to switch it on.

    Hey guys, my macbook doesn't switch on unless it is physically hot. I use a hairdryer to do this (I know it's bad but i have no other option, i'm not looking for a lecture on why it's bad to do this.)
    Once it is hot it still takes a long time to boot up because it will seemingly short-out (instantly shut down with blank screen) whilst booting up quite a lot, and at random times.
    Resetting the pram and smc seems to help sometimes, but it's hard to judge as the success of the bootup seems totally random.
    Once Ive got past the login screen and it finally boots up it will run fine, other than a few strange bugs that I have experienced;
    - If I highlight a video file and do a quick preview (pressing spacebar), the laptop shorts out and shuts down
    - If I try to record video using the webcam, its shorts out and shuts down (Using webcam on skype is fine)
    - An email i received once had an automatic video playing, which resulted in the laptop doing the same as above
    I'm assuming it's a graphics related issue but I'm no expert, video games run fine on it though.
    If anyone has any idea as to what the problem/solution could be, please let me know!
    Haven't found a single post online that relates to this problem..
    Macbook Pro 17inch mid 2009
    2.8ghz intel core 2 duo
    4gb 1067 MHz DDR3
    500gb HD
    Nvidia GeForce 9400M 256MB
    OS X 10.9.4
    Thanks

    Thanks a lot for the reply mate, much appreciated
    Yup its very weird haha
    I do hourly backups with time machine.
    Havent tried reinstalling OS. Not sure how possible it is because of the booting issue, it's hard to restart without it shorting out.
    Not taken it to anyone just yet.
    Here's what entre gave me;
    EtreCheck version: 2.1.6 (109)
    Report generated 21 January 2015 13:18:36 GMT
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Support] links for help with non-Apple products.
    Click the [Details] links for more information about that line.
    Click the [Adware] links for help removing adware.
    Hardware Information: ℹ️
      MacBook Pro (17-inch, Mid 2009) (Technical Specifications)
      MacBook Pro - model: MacBookPro5,2
      1 2.8 GHz Intel Core 2 Duo CPU: 2-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1067 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1067 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
      Battery Health: Normal - Cycle count 113
    Video Information: ℹ️
      NVIDIA GeForce 9400M - VRAM: 256 MB
      Color LCD 1920 x 1200
      NVIDIA GeForce 9600M GT - VRAM: 512 MB
    System Software: ℹ️
      OS X 10.9.4 (13E28) - Time since boot: 13 days 18:33:28
    Disk Information: ℹ️
      FUJITSU MJA2500BH FFS G1 disk0 : (500.11 GB)
      EFI (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) / : 499.25 GB (42.68 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      MATSHITADVD-R   UJ-868 
    USB Information: ℹ️
      Apple Inc. Built-in iSight
      Apple, Inc. Apple Internal Keyboard / Trackpad
      Apple Computer, Inc. IR Receiver
      Apple Inc. BRCM2046 Hub
      Apple Inc. Bluetooth USB Host Controller
    Configuration files: ℹ️
      /etc/hosts - Count: 15
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Library/Application Support/Roxio
      [not loaded] com.roxio.TDIXController (2.0) [Support]
      /System/Library/Extensions
      [not loaded] com.Belcarra.iokit.USBLAN_netpart (2.0.2) [Support]
      [not loaded] com.Belcarra.iokit.USBLAN_usbpart (2.0.2) [Support]
      [not loaded] com.RemoteControl.USBLAN.usbpart (2.0.6) [Support]
      [loaded] com.digidesign.iokit.DigiDal (9.0f4) [Support]
      [not loaded] com.flipvideo.IOUSBCameraMassStorage (1.0.1) [Support]
      [not loaded] com.line6.driver.xtaudio (7.2.4 - SDK 10.7) [Support]
      [not loaded] com.paceap.kext.pacesupport.master (5.7.2) [Support]
      [not loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.33) [Support]
      [not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.33) [Support]
      [loaded] com.waves.driver.soundgrid (2.0.0) [Support]
      /System/Library/Extensions/Belcarra.USBLAN_netpart.kext/Contents/PlugIns
      [not loaded] com.belcarra.iokit.netpart.panther (1.6.1) [Support]
      /System/Library/Extensions/Belcarra.USBLAN_usbpart.kext/Contents/PlugIns
      [not loaded] com.belcarra.iokit.usbpart.panther (1.6.1) [Support]
      /System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
      [not loaded] com.paceap.kext.pacesupport.leopard (5.7.2) [Support]
      [not loaded] com.paceap.kext.pacesupport.panther (5.7.2) [Support]
      [loaded] com.paceap.kext.pacesupport.snowleopard (5.7.2) [Support]
      [not loaded] com.paceap.kext.pacesupport.tiger (5.7.2) [Support]
      /System/Library/Extensions/RemoteControl.USBLAN_usbpart.kext/Contents/PlugIns
      [not loaded] com.RemoteControl.USBLAN.panther (1.6.1) [Support]
    Startup Items: ℹ️
      DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
      HP IO: Path: /Library/StartupItems/HP IO
      PACESupport: Path: /Library/StartupItems/PACESupport
      Startup items are obsolete in OS X Yosemite
    Launch Agents: ℹ️
      [not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
      [loaded] com.adobe.CS5ServiceManager.plist [Support]
      [loaded] com.google.keystone.agent.plist [Support]
      [running] com.rim.BBLaunchAgent.plist [Support]
      [running] com.trusteer.rapport.rapportd.plist [Support]
      [loaded] org.macosforge.xquartz.startx.plist [Support]
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist [Support]
      [invalid?] com.adobe.SwitchBoard.plist [Support]
      [loaded] com.google.keystone.daemon.plist [Support]
      [not loaded] com.gopro.stereomodestatus.plist [Support]
      [running] com.line6.l6ksettingmgr.plist [Support]
      [loaded] com.microsoft.office.licensing.helper.plist [Support]
      [running] com.paceap.eden.licensed.plist [Support]
      [running] com.rim.BBDaemon.plist [Support]
      [running] com.trusteer.rooks.rooksd.plist [Support]
      [running] com.waves.daemon.SoundGridProtocolService.plist [Support]
      [loaded] org.macosforge.xquartz.privileged_startx.plist [Support]
      [loaded] PACESupport.plist [Support]
    User Launch Agents: ℹ️
      [loaded] com.adobe.ARM.[...].plist [Support]
      [loaded] com.adobe.ARM.[...].plist [Support]
      [running] com.spotify.webhelper.plist [Support]
      [loaded] com.valvesoftware.steamclean.plist [Support]
    User Login Items: ℹ️
      iTunesHelper Application Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      WDDriveManagerStatusMenu Application Hidden (/Incompatible Software/WDDriveManagerStatusMenu.app)
      HP Scheduler Application  (/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app)
    Internet Plug-ins: ℹ️
      Unity Web Player: Version: UnityPlayer version 4.5.5f1 - SDK 10.6 [Support]
      Default Browser: Version: 537 - SDK 10.9
      OfficeLiveBrowserPlugin: Version: 12.2.8 [Support]
      AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 [Support]
      FlashPlayer-10.6: Version: 16.0.0.257 - SDK 10.6 [Support]
      DivXBrowserPlugin: Version: 1.4 [Support]
      Silverlight: Version: 5.1.20913.0 - SDK 10.6 [Support]
      Flash Player: Version: 16.0.0.257 - SDK 10.6 [Support]
      Gears: Version: 1.0 [Support]
      OnLiveGameClientDetector: Version: OnLiveGameClientDetector 1.0.0 [Support]
      QuickTime Plugin: Version: 7.7.3
      AdobePDFViewer: Version: 11.0.09 - SDK 10.6 [Support]
      iPhotoPhotocast: Version: 7.0
      SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 [Support]
      JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
    User internet Plug-ins: ℹ️
      Google Earth Web Plug-in: Version: 7.1 [Support]
    Audio Plug-ins: ℹ️
      DVCPROHDAudio: Version: 1.3.2
      Digidesign CoreAudio: Version: 9.0 [Support]
    3rd Party Preference Panes: ℹ️
      3ivx MPEG-4  [Support]
      DivX  [Support]
      Flash Player  [Support]
      GoPro  [Support]
      Growl  [Support]
      Line6AudioMIDI  [Support]
      MacFUSE  [Support]
      Trusteer Endpoint Protection  [Support]
    Time Machine: ℹ️
      Skip System Files: NO
      Mobile backups: ON
      Auto backup: YES
      Destinations:
      Data [Network]
      Total size: 2.00 TB
      Total number of backups: 95
      Oldest backup: 2013-05-03 11:58:04 +0000
      Last backup: 2015-01-21 12:47:59 +0000
      Size of backup disk: Excellent
      Backup size 2.00 TB > (Disk size 0 B X 3)
    Top Processes by CPU: ℹ️
          2% SGProtocolService
          1% WindowServer
          0% BBLaunchAgent
          0% rapportd
          0% Mail
    Top Processes by Memory: ℹ️
      214 MB Google Chrome Helper
      159 MB Google Chrome
      155 MB Finder
      125 MB rapportd
      77 MB com.apple.WebKit.WebContent
    Virtual Memory Information: ℹ️
      80 MB Free RAM
      1.12 GB Active RAM
      1.05 GB Inactive RAM
      1.04 GB Wired RAM
      106.69 GB Page-ins
      3.19 GB Page-outs
    Diagnostics Information: ℹ️
      Jan 19, 2015, 11:52:18 AM /Users/[redacted]/Library/Logs/DiagnosticReports/Skype_2015-01-19-115218_[redac ted].crash

  • Help - macbook pro will not switch on

    I have had my macbook pro for about 2 years, it is the older version but is running leopard. When I switch it on it goes to a grey screen with the apple logo and the timer, after staying like this for a while it then switches itself off.
    A friend suggested I cold started it (holding down the power button) and also holding down shift to whilst restarting it, neither of these worked.
    I have not dropped it, I believe it is charged to full battery and I save nearly all my files on an external hard drive so it shouldn't be full.
    Please can anyone suggest anything I can do to help or suggest what the problem may be. My friend said that I possibly have a problem with my hard drive?
    Thank you,
    Lucinda.

    Possible. Insert Install DVD 1 (that came with your MBP) and try booting with the c key pressed. If/when you see the menu bar (after language selection) select Utilities menu > Disk Utility, select your HDD in the list, and click Verify Disk. If errors are found, click Repair Disk.

  • My MacBook Pro 13 not booting up and chime is not heard

    My MacBook Pro is having recurrent problems. Initially after installing maverick x it started working slow then it didn't boot up at all and was stuck at apple logo while start up chime was still present. Then it again started working after disc recovery option. However it agin was slow and now and then when I switched it off and started back chyme was not heard and booting was stuck at apple logo.

    If the screen is actually showing something the startup chime doesn't really matter. That is actually controlled by the volume set in OS X.
    That suggests your Mac is actually starting up but can't find the operating system, OS X, to boot from.
    You should take the system to an Apple store to be checked out as I would think you have a hardware problem. Like the hard drive has failed.

  • MACBOOK PRO DOES NOT SWITCH ON - any thoughts???

    Dear MacUser´s team....
    I am in panic, I have a MacBook Pro (Intel Processor) and all of a sudden it stopped working.
    What and how happened?
    I was using my mac as normal. After working on Photoshop and iwork, I noticed that the HD started to make a funny noise then... all of a sudden it crashed... I waited until it got processed but nothing really change, still crashed.
    So I switched off my computer and then everytime I try to switch it on - just comes a BLANK (white) screen and nothing else (apart from a randon noise coming from the HD)... after a while, just keeping FLASHING A FOLDER ICON with an interrogation (?).
    Can anyone give me some thoughts of how I can get out of this serious trouble?
    I very much thanks for any kind soul that will put me in the right direction.
    Looking forward to hearing from you all.
    Best regards,
    Ana Medeiros.

    CarlitosHitchcock wrote:
    oooooo...
    first of all, thanks for ur reply.
    Well, so i must buy a HD for my MAC? Are ther any possibilities to keep the information from my HD?
    You might try downloading Ubuntu as a "live" CD, booting into it and seeing if your HD is accessible, and, if it is, you can copy the data to another external drive. if the failure is a circuit board, you probably won't be able to access the HD.
    If you can boot into the Leopard DVD by holding down the "C" key with the DVD inserted, you can also check your HD, but if the system won't boot at all, it's time to take it to Apple for service.
    Also, I would like to ask you why it could had happened, normally it happens?
    Sadly, it's perfectly "normal" for mechanical things such as HDs, appliances, car engines, etc. to fail.
    Why even we humans eventually go
    Regards,
    In general a failure like this is not a complete failure. You may find most of your HD data are intact, but while the computer is being serviced, I would install a new, larger HD anyway.

  • Macbook Pro does not start up and nothing works. Need recovery!

    Hi there
    My MacBook Pro has shut down while wathcing a video and when ever I try to start up, a sign looking loke"no parking (Prohibitory Sign)" comes up after grey screen.
    I tried to start it in safe mode but it does not go in safe mode.
    Tried pram and nvram reset pro but didnt help.
    Succesfully started in recovery mode ( tried both cmd + R and Cmd +opt+ R) tried disc repair but it cannot repair or verify anything. it gives me errors.
    Could not recover anything in here as could not find any back up.
    Tried to re-install Maveric but could not see HDD, so could not go ahead.
    Inserted OS X installationCD that came with laptop, stared up by holding C, tried to repair disk but again, could not repair disk.
    Could not do anything in Terminal.
    I cannot even erase and re-install the OS
    I also had windows 7 installed but now I cant start it up aswell.
    The question is, what else I can try to save my computer? More importantly, I have so many pictures I want to save. How can I save them?
    Thanks in advance!
    Memis.

    Based on the procedures you have tried and the symptoms you have described, your MBP internal HDD had failed and will need to be replaced.
    If you have a backup, your data should be available to you when you install the new HDD.  If you do not have a backup, you may try to see if any of the data recovery software available online will work for you.  Most have a trrial version that will tell you if they can be of any use for you or not.  The last option is to engage the services of a data recover firm.  They will not guarantee if they can get any or all of your data and will be very expensive.
    Ciao.

  • IPhone 4S doesnt show charge symbol and charges very slowly on brand new MacBook Pro. Not recognised by iTunes. Charges fine on Asus laptop. iPod charges fine on Macbook Pro...

    Hi!
    I'm trying to fix a problem I'm having with my iPhone 4S and MacBook Pro.
    I did manage to connect it initially and set it up with XCode as well as iTunes.
    Today I have spent two hours trying to connect it to my MacBook Pro and I have so far found the following...
    iPod 2G - charges from MacBook Pro, Wall Charger, Asus Laptop (works with both my Apple USB cables)
    iPhone 4S - doesnt charge from MacBook Pro, but does from Wall Charger and Asus Laptop
                      - Asus Laptop running Linux Mint recognises the iPhone as a device with 'lsusb' and you can browse photos etc
                      - MacBook Pro doesn't recognise the iPhone as a device with the 'systemprofiler' equivalent of lsusb
                      - Interestingly, despite the charging icon not showing, the iPhone either maintains charge or very, very slowly charges
                         when connected to the MacBook Pro.
    Any ideas as to what might be wrong? I've tried both the USB ports on the MacBook Pro and no difference. I've tried the 6 ports
    on my old Asus laptop and they all work fine!
    Thanks for your help!

    OK.. Went to the Apple Store - they could either book an appointment with a Genius.. or send the phone for
    testing and repair. Found out I have a 2 year warranty on it so have a year left.
    My research has led me to assume that the USB 2.0 function of my iPhone was faulty from the day I got it (it kept disconnecting the reconnecting but transferred data fast), but soon stopped doing that and ran at about 1MB/s - USB 1.1 speed - and has done this ever since.
    The MacBook Pro somehow is trying to use the USB2.0 function and is not letting the phone fall back to USB 1.1.
    To test my theory I found an old USB 1.1 hub... plugged it into the MacBook Pro... then plugged the iPhone
    into that. Job done. Charging fine, recognised every single time I connect, and only took a few secs to send over my XCode app to the phone and runs fine! I guess this works as the hub forces the iPhone and MacBook both to USB1.1 mode which then works fine! Will just use it like this for a few months then send it in at an opportune moment (want to get some apps out before I lose my device for repair for a while!)
    I will in the next week or so test my iPhone on my friend's MacBook Pro (we bought them the same day but I didn't get the Retina cos I like to be able to upgrade RAM, Hard Drive, and replace battery when it wears out). I will also test their iPhones on my MacBook Pro to see whether it really is the phone or the MacBook!
    PS I will get WiFi Sync running since transferring 60GB of data over USB1.1 won't be fun... will do a full factory reset on the phone just in case there is an issue there - will post results of this too!

  • My MacBook pro will not start up and it keeps beeping.   The battery is fully charged.

    MacBook pro went to sleep last night.  This morning plugged it in to charge the battery.  It will not turn on now.  According to the plug and the battery display lights on the side, it is fully charged.  It is also beeping every 5 to 6 seconds. 

    You have ram issues.

  • Macbook pro will not switch on

    The Battery level was full the macbook pro has no life what so ever, will not switch on

    See SMC reset
    Step by Step to fix your Mac

  • Macbook Pro will not load OS and will not boot from Install Disk

    When I try to turn on my macbook pro it goes to the gray logo screen with the spinning gear however it does not progress from there and then after several minutes it proceeds to restart itself and the same process repeats itself. I have tried to boot into single user mode with success and have run /sbin/fsck -fy and that has returned that the volume appears to be ok. However, when I hit reboot it returns to the same process of the gray screen and spinning gear to black screen which repeats. When I boot into verbose mode it progresses to AppleYukon2: RxRingSize <= 1024, TxRingSize 256, RXMAXLE 1024, TXMAXLE 768, STMAXLE 3328 then it stalls for several minutes and then it shows continuing
    synchronizing disks... Killing processes
    then it says some other stuff to fast to read.
    When I try to boot from the install disk it will not boot from holding the c key it goes through the same aforementioned cycle. When using option to boot I can see the Disk then when I select it the cycle happens again.
    Also I have XP installed and I am able to boot into that successfully. Any help would be greatly appreciated.
    Not sure if I left anything out
    -bryce

    Welcome to Apple Discussions.
    Do you have multiple Accounts defined on that system? The last time you successfully were running, did you run from the Account with Administrator privileges?
    Do you have another computer from which you could boot and connect the Macbook Pro in Target Disk Mode to take a look at the drive from your working machine? Perhaps you can run Disk Utility from the working machine and point to the hard disk on the failing Macbook Pro.
    Message was edited by: Rick Lang

Maybe you are looking for

  • 1.1.3 Update errors

    Laptop Windows XP iTunes 7.6 couple different iPods and consider myself somewhat experienced with these so not a newb I've tried several times both on my laptop and PC at home as well as my PC at work to try to upgrade my Touch from 1.1.2 to 1.1.3. I

  • Change colors in multiple pie chart - with legend

    I need to change the colors of groups shown in multiple pie chart diagram in CR XI. I managed to actually change the colors in the diagram by using highlighting rules in the wizard. (Sorry, I need to guess the correct English terms since I am using t

  • Component not rendering in Stand Alone Skin editor

    I downloaded the stand alone skin editor and I wanted to play around with it. But I notice that my controls are not rendering. Kindly see sample image that I am getting. Image Not sure why, but I cant seem to see my changes even If I change it in my

  • 7.0.2 release date?

    I want very badly to get a new 2 gen nano but after the MASSIVE problems reported here and at ilounge, there is NO way i will have that crap ware on my computer. Of course this means no new nano, as it will not work with the latest stable version of

  • Printing of landscape forms

    Hi Friends , i am trying to take a printout from dotmatrix printer of smartform which is in made on A4 landscape . the issue is i'm getting printout in porttrait form only. Note : Dot matrix printer have landscape papers only , no portrait papers tha