My MacBook Pro (Retina) laptop does not recognize my HP printers

My MacBook Pro (Retina) laptop does not recognize my HP printers. HP only has updates but not full drivers for Mountain Lion. Some articles say the compatibility might only allow me to print, but the scan feature won't work. I am attempting to use either my HP Color Laser 2840 and my HP Photosmart 209-B printers. I tried to reinstall the printer drivers, but HP doesn't have drivers to download for Mountain Lion OS.
Anyone else have this issue?

Get your driver here:
http://support.apple.com/kb/DL907

Similar Messages

  • HT4199 My macbook pro and ipad does not recognize my printer on my wireless network, but my pc does. How can I get my apple products to see it on the network so I can print wirelessly?     My printer is a Brother MFC-J270W

    My macbook pro and ipad does not recognize my printer on my wireless network, but my pc does. How can I get my apple products to see it on the network so I can print wirelessly?     My printer is a Brother MFC-J270W

    try disabling email scanning for incoming mail.
    One of the last things that occurs is the mail server and Thunderbird sign off on "where we are up to" and Thunderbird stores this state information in the popstate.dat file in your profile (there is one in each POP mail account folder). If the anti virus, or you for that matter, end the conversation a few seconds early that hand off does not occur and the popstate is not stored.

  • Macbook pro retina display does not respond. Any fixes?

    Macbook Pro Retina Display does not respond. Any fixes? I wonder if it overheated and shut down. Anyone else had a problem?

    Kitsi,
    try shutting the book for 1-min and reopen it.
    Also found the combinations buttons fn-control-F7 to unfreeze.
    good luck

  • After sleep, retina MacBook Pro (Mid 2014) does not recognize usb connected mouse movement

    After sleep, retina MacBook Pro (Mid 2014, on 10.9.4) does not recognize usb connected mouse movement. I have tried a generic usb mouse and my Razer Deathadder usb mouse. Both mice work before sleep; but after sleep, the computer no longer recognizes mouse movement while still recognizing the mouse buttons when pressed. Any idea why this is occurring?

    Hello, chocotac0.  
    Thank you for visiting Apple Support Communities.
    Here are some troubleshooting steps that I would recommend when experiencing this issue.
    OS X Mavericks: Reset your computer’s PRAM
    http://support.apple.com/kb/ph14222
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/ht3964
    OS X Mavericks: If a USB device isn’t working
    http://support.apple.com/kb/PH13876
    Cheers,
    Jason H.

  • I have a open box MacBook Pro retina and does not have iLife.  Called apple care said they are unable to disassociate past apple Id .  Please help.

    No iLife in MacBook Pro retina when I bought open box.  Called apple care said their system is unable to disassociate past apple ID

    There are no iLife disks that come in the box. In any case,
    https://discussions.apple.com/message/18706980#18706980

  • Why my macbook pro 7.1 does not recognize 2x4 GB of ram (PNY), I already tried 1 by 1 and recognize up to 6? What it's wrong

    Hello, I updated my RAM from 4 to 8, the problem is that does not recognize the 8 GB, I tried one by one, and only recognize 6 GB (one module of 2 and one module of 4) but by the time I install both, it doesn`t work. (I updated the firmware also) 

    If you substute each 4GB card, do you still have the system recognizing 6GB? Since it's not recognizing all 8GB, that suggests an issue with that memory ... is that what PNY says should be used in a MBP?  While I haven't used PNY memory, they do have a line that they say is for Apple computers here. Is that what you used?  I normally use Crucial or OWC (their own branded memory or Samsung) which have worked well over a number of systems.

  • My Macbook Pro (OSX Yosemite) does not recognize my Rocketfish music receiver via Bluetooth.

    I bought a Rocketfish music receiver in order to stream music on my MacBook Pro using Yosemite to my stereo receiver.  I cannot get my laptop to recognize/connect to the Rocketfish or my iPhone 5 even though the iPhone 5 connects to the receiver.

    Maybe this?
    OS X Yosemite: Turn Bluetooth on or off

  • Macbook Pro Retina HDMI Does Not Support 2560 x 1080

    I have both the early and late 2013 rMBP 15 inch but it seems like the early 2013 does not support my Dell U2913WM at maximum resolution of 2560 x 1080 for some reason on HDMI. Are the HDMI ports any different between the two? I'm tried using SwitchResX, but at 2560 x 1080, I can only go up to 53 Hz before it says invalid configuation on the early 2013 rMBP. On the late 2013 rMBP, it can output 2560 x 1080 at 60 Hz fine. It would seem like both graphics cards are more than capable of pushing this resolution, and if I connect through Displayport, they're both fine too. I was hoping to use HDMI though to free up a Thunderbolt port. Why are the HDMI ports not outputting at the same capabilities?

    Absolutely, I understand that but I'm wondering if or why Apple has limited the HDMI port on the early 2013 rMBP. HDMI 1.4 should be more than capable at outputting up to 4k resolution, so it would seem like Apple is intentially limiting the early 2013 rMBP to HDMI 1.2? At least one post from as early as 2012 seems to suggest that installing Windows on a rMBP allows higher outputs. I thought Mavericks included support for HDMI 1.4 (http://www.reduser.net/forum/showthread.php?101431-10-9-Mavericks-4K-working-tes ting-it-now) but did they not extend it down to the early 2013 rMBP? Seems like it would be able to support it, no?
    Perhaps the better question is whether anyone has been able to output anything at over 1080P on anything other than the latest rMBP after upgrading to Mavericks?
    From the earlier discussion:
    "The port definitely supports it, but OS X is another story. If I boot into Windows and connect it to a display capable of displaying 2560x1440 over HDMI, it just works. If I'm in OSX, it refuses to allow anything over 1920x1200. Even if I try to force the resolution with SwitchResX, it doesn't work. If I create a custom resolution with a 40Hz refresh rate instead of 60Hz, then it does actually work. 2560x1440 @ 40Hz fits within the bandwidth constraints of a single link at 165MHz. So it appears that OSX limits the port to 1.2 frequencies. I'm not realy sure why -- HDMI 1.4 should allow for frequencies upto 340MHz, and the hardware is clearly capable based on Windows."
    Now that Mavericks supports higher than 1080P over HDMI at least on the latest rMBP, did they just not extend that support to earlier rMBP's even though the hardware is capable of it?

  • I am using Quickbooks Pro with my macbook pro. It does not allow me to use the @ symbol when I am inputting an email address into the client information section. What do I do?

    I am using Quickbooks Pro with my macbook pro. It does not allow me to use the @ symbol when I am inputting an email address into the client information section. What do I do?

    stefani88 wrote: It seems from other discussions my current OS on my laptop is the reason why it won't sync but people running older versions of windows aren't having a problem. So I don't get it.
    Oh. Gosh.  What's Windows got to do with anything? You're on Leopard, on a Mac.
    It seems from other discussions my current OS on my laptop is the reason why it won't sync

  • I just returned from air travel with my macbook pro. It does not start up. Completely black, no sound, no life.

    I just returned from air travel with my macbook pro. It does not start up. Completely black, no sound, no life. I tried command-option-power. Still dead.

    SheilaArl wrote:
    I just returned from air travel with my macbook pro. It does not start up. Completely black, no sound, no life. I tried command-option-power. Still dead.
    I have a 2007 Macbook, so it's probably a lot older than your Macbook Pro, but it sounds like what happened to me, except that mine hadn't travelled anywhere. I pulled out the ram and blew out some dust, popped them back in, and wha-la! it turned back on and worked better than ever! Or otherwise you've got a dud/old/warped/fried battery, which is also what happened to my laptop - it got so  bad it did what your laptop is doing. Ordered a new battery online and all good since then. Or otherwise, like the previous post asked, 'is it plugged in?'

  • I installed Yosemite yesterday on my 2013 MacBook Pro and Word does not open anymore. Any advice/solution?

    I installed Yosemite yesterday on my 2013 MacBook Pro and Word does not open anymore.v Any advice/solution?

    How to completely remove Office for Mac 2011
    Do it per these instructions, don't just put the apps in the trash.

  • My laptop does not recognize my iPhone 3GS as a camera device. I need to import my photos and videos and don't know how

    Hi everyone,
    my laptop does not recognize my iPhone 3GS as a camera device anymore.
    I need to import my photos and videos and don't know how.
    The iPhone does charge when I plus it in the USB hub but it does not ask me to import the photos anymore
    and it also doesn't show it as a device when I click on the "computer" button where an SD card or an Usb stick would normally be displayed..
    I don't know what to do

    Thank you, randers4! I now plugged it directly into the ports of my laptop and it's still not recognized.
    Does the app Photosync work for more than a thousand photos or will this take me forever?
    Thanks a lot

  • MacBook Pro late 2013 does not show login window after waking from sleep

    MacBook Pro late 2013 does not always prompt for login, but opens directly to desktop, even though security settings are setup to prompt for password after 5 minutes. Up to now, this only has happened on battery, machine goes to sleep or lid is closed, 10 minutes pass, lid is opened and desktop is shown instead of lock screen. Console shows, that the machine was actually sleeping (10 min no log entries) and also does not show any error in regards to login window.
    This behaviour occurs randomly and I could not track down any root cause/behaviour, yet. Sometimes everything behaves as it should.
    Any ideas?
    Thanks
    marcus

    Count me in, I have the same issue, and from what I read here, it looks like a Yosemite/SSD related issue ?
    I'm not 100% sure if it started when I put a SSD in my old iMac 2009 (as a fusion drive) or if that's after that when I upgraded to Yosemite...
    I did disable auto poweroff like suggested in another thread : Mac freeze during the night sleep.
    sudo pmset -a autopoweroff 0
    We'll see if it helps.
    It happens toughly a couple of times a week.

  • I have a new Macbook Pro but it does not have iDVD. How can I get this application?

    I have a new Macbook Pro but it does not have iDVD. How can I get this application?

    I have a new Macbook Pro but it does not have iDVD. How can I get this application?
    If you are still within your 15 day return period.  Call Apple they will sent out iDVD at no charge.  (There are no realistic substitutes.)
    Nicely explain that you may return the computer without iDVD. That usually does the trick.  You MUST speak to a senior advisor to get a free copy. The first tier people cannot do it.
    408-996-1010
    800-692-7753
    If that doesn't work you can purchase iLife 11  (includes iDVD) on disk.
    IDVD is a wonderful piece of software and well worth the low cost of $40.
    http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES/ref=sr_1_1?ie=U
    http://dealmac.com/lw/artclick.html?1,527850,1872219

  • Is there a compact flash and SDXC card reader with USB3 and or thunderbolt connections that will work with new MacBook Pro retina laptops running OSX Mavericks please?

    Is there a compact flash and SDXC card reader with USB3 and or thunderbolt connections that will work with new MacBook Pro retina laptops running OSX Mavericks please?

    Yes, I too had this problem.
    I was issued an update from Apple for a new version software as well as a new version of Lightrooom and now it shows up on the desktop and in finder as it should.
    MacBook Pro Retina running 10.8.2 (12C54)
    Lightroom running 4.1
    Hope that helps.
    aa

Maybe you are looking for