My MacBook Pro will connect to WiFi but will not work in one location but will at others. I have the same issue with my IPhone 4S at the same location.

My MacBook Pro will connect to Wifi at one location (this is a secure location) but will not allow access to the internet.  I will put in the password but will not display page.  Other wifi capable devises do not have this issue but my Mac and my Iphone 4S will not work.  I have tried restarting the router.  All other wifi locations I have been to have not had this issue.  Any suggestions? I am realtively new to Apple products (less than a year) so any advise is greatly appreciated.

The other devices that are working got on with the same password.  It says it is connected.  Just nothing works on the internet.

Similar Messages

  • My macbook pro is connected to wifi but it will not connect to the internet.

    My macbook pro is connected to wifi but it will not connect to the internet. When I go on safari, it says that "Safari can't verify the identity of the website". Then I tried to update flashplayer but you need the internet to update it. All this only started happening after that Moutain Lion software was downloaded onto the laptop. Please help, I have been internet-less for a couple months now.

    Hi rynhelp,
    If you are not able to connect to the internet after installing Mountain Lion, see this article for information on how to start troubleshooting:
    OS X Mountain Lion: Use Network Diagnostics
    http://support.apple.com/kb/PH10984
    You may find additional troubleshooting information in this article useful:
    Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
    http://support.apple.com/kb/HT4628
    It is written for Lion but works for Mountain Lion as well.
    Cheers,
    - Ari

  • My macbook pro hard drive went bad and i bought a new one and installed it. Now i have the old corrupted hard drive in my hand and i am looking to recover my files from it, any suggestions please? too bad i never backed them up.

    My macbook pro hard drive went bad and i bought a new one and installed it. Now i have the old corrupted hard drive in my hand and i am looking to recover my files from it, any suggestions please? too bad i never backed them up.

    After you have installed the OSX on the new HDD in your MBP, install the old HDD in an enclosure and connect it to your MBP via USB.  Then try to drag and drop  your data to the new HDD. 
    If this proves unsuccessful, you may look for data recovery software on the Internet.  There will be free trails to see if it will work or not.  If the trial suggests that it will work, then you will have to purchase the software.
    The last resort is a professional data recovery service that will offer NO guarantees and charge a lot of money.
    As you now can appreciate, backups eliminate such predicaments.
    Ciao.

  • My MacBook Pro cannot connect to wifi but iPhone can

    My 2012 MacBook Pro won't connect to my wifi. My iPhone connects just fine, and my MacBook can connect perfectly to other wifi channels, just not mine. I have tried everything to get this to work! Can anyone help? It would be much appreciated!!

    Solution may be found if you search in the "More Like This" section over in the right column and by doing a forum search.  Your type of question is asked here just about every day.

  • My apple tv has always had issues on connecting to wifi. but now that iv'e updated the system, it wont connect to wifi at all. Id like to know what to do, and if its eligible to get a new one. the serial number is: DY5HNVP5DRHN

    My apple tv has always had issues on connecting to wifi. but now that iv'e updated the system, it wont connect to wifi at all.
    My connection is fine because Im using it on my macbook pro perfectly, so the problem is definetly on apple tv.
    Id like to know what to do, and if its eligible to get a new one. the serial number is: DY5HNVP5DRHN

    From what I understand from this post, yes you do qualify for a replacement.
    http://www.macrumors.com/2013/04/15/apple-initiates-replacement-program-for-3rd- generation-apple-tvs-with-wifi-connectivity-issues/

  • My computer says I am connected to wifi, but when I go to use the internet, I am not connected. What do I do?

    I have tried to reset my wifi and use different wifi systems. I am in college, so I have tried to use the internet both on campus and in my home in Dallas, neither of which worked. I JUST WANT TO HAVE INTERNET.

    My computer says I am connected to wifi, but when I go to use the Internet, I am not connected.
    Usually when this occurs on one Wifi and Internet connection, the wifi router is working, but the router connection to the Internet Service Provider is broken. Resetting the modem or router/modem combination often results in a new connection to the ISP being established (baring any data caps limits, line, modem or ISP troubles)
    However your mentioning it's not connecting anywhere your going on wifi or Internet, which could mean your machine has been compromised and possibly blacklisted until it's cleaned up of malware, or you tried to self solve your earlier issues and messed up your Network settings.
    I tend to lesser think it's a actual hardware problem, but it might come to that eventually.
    You should test the compromised/blacklist theroy by using a Ethernet cable to the modem you know has a good Internet on and powering on/off the modem. (if a router/modem combination, then no need). If you get Internet and not kicked off in a few minutes, then your machine is fine, likely messed up Network settings are too blame.
    You can clear everything out by creating a New Location by editing locations and creating a new one, also by going to Airport Advanced > Airport and deleting all the previous connections to start over new. Reboot.
    Connect manually to your home network and save in Keychain when it asks.
    If this is all too much for you, take it to a local PC/Mac repair shop as they specialize in software/network issues.

  • My Macbook Pro (bought in 2013) function keys are not working

    My Macbook Pro (bought in 2013) function keys are not working. The function keys ie the volume and brightness are not working at all both with one single tap and with the function button. I have checked the settings for the keyboard but nothing seems to stand out that is making the keys not work?
    Please can you help?
    Thanks
    Kat

    Some might suggest resetting the SMC, but I don't really think that will solve the problem. You can try, though.
    I would suggest, since you're still under warranty, taking your machine to your local Apple Store/AASP and letting them fix the problem. It could be any sort of hardware problem. Only the Apple techs have the tools to properly diagnose and repair the machine.
    Clinton

  • My macbook pro mid 2009 keyboard and trackpad is not working.

    My macbook pro mid 2009 keyboard and trackpad is not working. it was working perfectly fine a week ago and it stopped. i tried using a external wireless mouse and keyboard but only the mouse will work!! They keyboard lights up when it is booting up but when i try to sign in, nothing types or the mouse wont work. i am fine if the mouse doesnt work because i can use an external one but can someone please help me?!

    The best option is an appointment at an Apple store genius bar and have the technicians diagnose the problem.
    Ciao.

  • Macbook Pro 17" - My built in speakers are not working.

    Macbook Pro 17"
    My built in speakers are not working.
    The speaker logo is not highlighted (grey not Black) and when in sound options  "output" pane only displays the digital out for 'optical' - ie, the internal speakers dont register (headphone socket works)
    Any ideas?

    1. If red light is visible in the headphone port, plug the headphone into and out of the port 5 or 6 times
         to flip the microswitch inside the port. Hopefully that will make the mode revert back to analog from digital.
    2. Reset PRAM. http://support.apple.com/kb/PH4405
    3. Reset SMC.   http://support.apple.com/kb/HT3964
         Choose the appropriate method.
    Hope any one of these steps helps.

  • Apple TV 7.0.2 Airplay with MacBook PRO OS X 10.10.1 is not working.

    Apple TV 7.0.2 Airplay with MacBook PRO OS X 10.10.1 is not working, I have validated all settings and rebooted all systems (per Apple recommendation) and still not working what seems to be the issue?

    You need to upgrade your OS. It's your responsibility to verify if your equipment meets the system requirements, not the Apple Store.
    Upgrading to Snow Leopard
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s iCloud services; fees and
               terms apply.

  • I plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???

    i plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???

    Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?

  • Is about to enter the code for my personal wifi, but in my code I have the £ sign which i cannot type. What shall I do?

    Is about to enter the code for my personal wifi, but in my code I have the sign £, which I cannot type. What shall I do?

    Welcome to the Apple Community.
    I'm afraid the only thing you can do is the obvious thing, change your password.

  • I have an hardware issue with my iphone 5 64gb. its lock button in not working. for a fact i know that it can be replaced but my question is this that do they require the bill or anything to replace or they only require the phone in usa

    i have an hardware issue with my iphone 5 64gb. its lock button in not working. for a fact i know that it can be replaced but my question is this that do they require the bill or anything to replace or they only require the phone in usa

    Warranty and support is only valid in the country of origin.  The only exception being the EU where a device bought in any EU country can get warranty or service in any EU country.
    Warranty is determined by device (serial number), no documentation required.
    Apple does not repair devices, they replace them.  For that reason, ensure the device is backed up and any pictures take with the device are copied off the device prior to going in for service.

  • MacBook Pro can connect via Airport but not iPhone or iBook G4.

    Anyone have any ideas? My Macbook Pro can connect to my Airport (v.7.3.1, 802.11n) but not my iPhone or iBook or a Windows Computer or WiFi Blackberry.
    The connection is strong and detectable by the ibook but "unable to connect".
    Somethings up with the settings but not sure what.
    Any ideas?
    HELP!
    thanks
    --K

    I've tried Channel 1,2,3,4,5 (still need to try the others)
    Secured or unsecured the only wireless connection that works is my MacBookPro.
    I get the message "unable to join network..." The connection is very strong.

  • MacBook Pro Boot Camp Sound Audio Drivers Do Not Work with Miscrosoft Vista

    I installed Vista via Boot Camp on my new 15" i7 MacBook Pro. After full MS Vista patching and Apple Boot Camp driver installation, the sound/audio does not work.
    After some searching on the net, I've noticed that this is perhaps a widespread problem. Are there any solutions or an indication of when this will be fixed?

    When you mean no sound, do you get the volume slider but nothing comes out or do you not get the volume slider at all?
    Go to control panel, sound (you might need to switch to classic view to see the one im on about), then the "sounds" tab, there should be audio clips that you should be able to play, if the laptop has picked up the sound controller in it.
    If you cant play these (greyed out) then the driver isnt installed properly.
    There should be a update option in the boot camp program that is installed in your vista partition, run that, and if it fails you can try what is below.
    Try going into device manager, uninstall/remove the drivers under the heading "sound, game and audio controllers" reboot the machine and it should install them back in again.
    If it doesnt and asks for a disc, then they'll be on your max os x disc, but not sure you can install drivers individually this way. might have to reinstall the boot camp drivers from scratch.
    Ive had this proplem on PC's (not macs) with drivers from manufacturer of the machines not working after windows updates. Fixed by using drivers from the audio controller manufacturer. But dont think its the same issue you are having.

Maybe you are looking for

  • 1st computer in 10 years - how best to set up my music collection?

    Specifically, is it best to store your music on an external hard drive? Somewhere I heard that having a large iTunes library can slow your computer significantly. Is this true? Also, I'd love to have it so that a) music is not clogging my computer an

  • How to listen to FM online on Safari?

    Hi, please help me to listen to my favourite FM radio online. I'm from Malaysia and i love the local FM stations. When i try to listen, it says " Safari cannot find the internet plug-in. The page _ has content of MIME type "application/x-oleobject".

  • Req to be modelled

    Hi there is a req where in we use table KNVP , this table cointains the customer code and it has some thing called as PDP days fixed for each customer ...say customer  C01- has pdpays of 01,05 means the customer would be serviced on Monday and friday

  • I have a gps case for my ipod touch How can I download a gps telenav for my ipod?

    I try to install but it's say is no compatible with this device... Thanks

  • What is this phenomenon called??

    What is this phenomenon called? And is there a sollution for? We recorded a 1080i50 signal that was switched on a Black Magic ATEM switcher on a Atomos recorder. When importing this file in FCP all seems fine,.. but after exporting it.. these strange