My MacPro OS 10.6.8 cannot connect to my wireless HP Officejet 6500APlus printer. It sees internet modem. Hp went thru all it's procedures, including new uploaded Driver. Utilitie tool found no issues. Now what?

I just switched internet provider and ran into this: My MacPro OS 10.6.8, recognizes the modem, as does my HP Officejet 6500A Plus wireless printer, but the computer doesn't "see" the printer. HP tried all its procedures, Mac Utility Disk repair was used without resolving the blind spot. Can you help? Now what?

If you just changed Routers, it is quite possible the Printer is holding onto its old IP Address, which is no longer in the smae subnet and not visible from the rest of your equipment.
You need to know what the IP Address of the printer is. Some HP printers will show you on a front panel, some can print it on a test page.

Similar Messages

I couldn't join with wi-fi networks in the screen. I already went through all of your instructions but I couldn't find out the solution. Now, what can I do

Sir, I have a problem in my iPad 2. I couldn't connect the wi-fi network in the screen. I already gone through your instructions mentioned in the guide but I couldn't get any solution. My other devices easily connect with that router but it doesn't. Because of this I faced lots of problems in downloading apps. So please kind enough to give some idea to resolve this issue. Thank you.

You aren't talking to Apple here. This is a user-to-user help forum. If you wish to speak to Apple call Apple support: http://www.apple.com/support/contact/
For troubleshooting WiFi try these suggestions: iOS: Troubleshooting Wi-Fi networks and connections

How do I connect to my wireless HP officejet 4620 printer? I was connected when I set it up, have not used it for 10 days. Cannot figure out how to connect.

I purchased a new hp Officejet 4620 wireless printer about 10 days ago. I followed the directions with installing it and it worked great. I did not use it until yesterday. I was not able to print from the wireless printer. How do I correct this issue?

I called Office Depot where I bought the printer. I reinstalled the product software and it is printing. Thank you for your response.

Cannot connect to the wireless networking

My Toshiba Laptop was preinstalled with Windows 7 Home premium 64-bit OS, and it had been working quite well with the wireless BB. However, the wireless internet connection was on and off within recent weeks, while the other mobile devices, such as iphone, ipad, or laptop, in my household had no such problem. The wireless signal was so strong, but the error message always said 'Windows cannot connect to the wireless networking'. It seemed there was something wrong with the wireless adapter.
I got a new TP-Link wireless adapter properly installed. Luckily, this worked; but unluckily, this worked for less than 24 hours. It was really frustrating that I, as a full-time student, depended so much on wireless networking.
Please help!!! Harry

Hi there
You may want to enlighten us with:
- What model are You using (f.ex. L300-123)
- What BIOS version is installed?
- What WLAN driver are You using?
All these questions are answered in PC Diagnostics found under Toshiba app folder in the start menu.
BR
Tom

Cannot connect Airport express wireless

Hello, cannot connect airport express wireless to linksys router. Connected now with ethernet cable but cannot figure wireless connection. My laptop cannot find the express while preforming setup scan, yet I'm connected to it. I can connect with my iphone but not wirelessly. Any suggestions?

....I was then told over the phone that airport express will not connect to third party routers.
This is NOT correct.
The AirPort Express will connect to a wireless network if you know the following:
1) The name of the wireless network
2) The exact setting for wireless security that the network is using
3) The wireless network password
Most users know 1) and 3), but very few know the exact type of wireless security settings that their wireless router is using. The Express will not connect to the wireless network unless it receives all of the information listed above.
So...we will assume that you know the name of the wireless network and the password for the network.
Do you know the exact type of wireless security setting that your wireless router is using? If not, the Express will not connect.
You may need to check the setup of your wireless router....or if the router was supplied to you by an Internet Service Provider, they may be able to tell you what type of wireless security setting is being used.
Post back when you have this info and we will proceed. There are still no guarantees that the Express will connect....but at least there may be a chance.

Since upgrading to Mountain Lion I cannot connect to my wireless router

Since upgrading to Mountain Lion I cannot connect to my wireless router. I have 2 wireless networks in my home. One is the primary whuch all of my devices connect to. The other is for backup only. I cannot connect to the primary with my iMac but have no trouble with any of the other devices which include iphones and ipads.phones and iPads. I can however connect to the backup without a problem. I have tried upgrading the firmware of the router as well as changing the security from WEP to WPA-2, no luck. Can anyone help?

Try this, it's for information.
In Finder, open the Go menu, press and hold the option key, 'Library' will appear on the menu, click and scroll to Application Support, open the folder and scroll to 'AddressBook-v22.abcddb'. Click on the file and press Command-I. Towards the bottom you'll see Permissions, tell me what they are please.

Hello, my sister her macbook pro cannot connect to our wireless internet. My imac however can, so the problem has to do with her laptop. We were wondering how we could solve this problem? Thank you very much in advance!

Hello, my sister her macbook pro cannot connect to our wireless internet. My imac however can, so the problem has to do with her laptop. We were wondering how we could solve this problem? Thank you very much in advance!

We did that, but it just doesn't seem to be able to connect. So basically we tried to connect to our network and insert the password, but afterwards it does nothing. Weird thing is also that the network symbol (top right of the screen) says that it has been connected, but when I go look at the system preferences --> network, it states that it has not been connected

I had a new hard drive replaced in my imac. Now my 1st generation apple TV does not appear under devices in itunes. How do I get my apple tv to connect to my computer? My OS is 10.6.8

I had a new hard drive replaced in my imac. Now my 1st generation apple TV does not appear under devices in itunes. How do I get my apple tv to connect to my computer? My OS is 10.6.8

Welcome to the Apple Community.
Navigate to Settings > Computers > Your Library on the Apple TV, you may be told you will lose all synced content, but you can't doing anything abouty this, you won't lose any purchased content that has yet to be transferred. Then select Settings > Computers > Connect To iTunes, note the passcode that appears on screen, click on the device in iTunes and enter the passcode when prompted.

My app store is not working. I followed instructions to hold wake/sleep home button....did not work, I went into settings, general, reset network settings....didn't work...now what?

My app store is not working. I followed instructions to hold wake/sleep home button....did not work, I went into settings, general, reset network settings....didn't work...now what?

Did you try to go to Settings > Store, tap on Apple ID, Log out and Login again.
What message do you get when you open the App Store?

When I plug in my Lacie Firewire 800 drive it causes certain apps to crash. Chrome will immediately crash when I open it, so will DVD player. It's only when I plug in my Firewire 800 drive, USB does not cause issues. What's the deal?

When I plug in my Lacie Firewire 800 drive into my Mid-2009 Macbook Pro running Mountain Lion - 10.8.2, it causes certain apps to crash. Chrome will immediately crash when I open it, so will DVD player. It's only when I plug in my Firewire 800 drive, USB does not cause issues. What's the deal?
I've restarted, verfied the disk, repaired permissions, smc reset.. don't know what else to do..

Contact Lacie since it's their product you are having issues with.

I have been using Itunes Apps for some time. Today I signed to Itunes to get Apps updated. Apple said I must update my account. I did that with a new password. Itunes said invalid support. Now what can I do?

I have been using Itunes Apps for some time. Today I signed to Itunes to get Apps updated. Apple said I must update my account. I did that with a new password. Itunes said invalid support. Now what can I do?

What do you mean "invalid support"? What EXACTLY did it say? Did it say you had an unsupported SIM after updating the firmware on your phone?

HT5312 I forgot the answers for my security questions, now I can't get into my AppleID. All because my rescue email address has been deactivated due to inactivity. Now what?

Here is some bad luck.
I forgot the answers for my security questions. I want to buy an app in the app store but Apple keeps asking me these questions I can't remember the answers to. All because my rescue email address has been deactivated due to inactivity. Now what?
I tried to create my old email address again, but funny enough it told me that specific email address was already taken....

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(100112)

Hi, my iphone capacity change from 32GBs to 13GBs. I already restore it several times and even set it as new iphone. But nothing happened. Someone nows what is happening? thanks

Hi,
my iphone capacity change from 32GBs to 13GBs. I already restore it several times and even set it as new iphone. But nothing happened. Someone nows what is happening? thanks

It is actually a 32GB iPhone?
What shows in Settings > General > About?

I had to install a new hard drive on my macbook air and now I am getting unkown error whenever I try to login to itunes

I had to install a new hard drive on my macbook air and now I am getting unkown error whenever I try to login to itunes. Apple support suggested I reset my password so I did that and still the problem is occuring. Itunes and the app store are working normally on my ipad and iphone. Does anyone know what the problem is. The new disk was installed in France coz I am on holiday there. could there be something I need to change in my settings? I need help urgently as I am trying to finish an assignment and need to be able to access and download from icloud.

Hi Stacey,
Thanks for visiting Apple Support Communities.
You may find the tips in this article helpful with resolving the error you're seeing:
iTunes Store: "An unknown error occurred (-9808)"
http://support.apple.com/kb/TS2753
Best,
Jeremy

Can't connect Airport Express wirelessly to network so that AirTunes and internet are available simultaneously

I can't connect Airport Express wirelessly to network so that AirTunes and internet are available simultaneously. My old AE allowed this but can't make the new one work that way.

In your instructions, you say to use the same encryption type as the router has set up. well, I am using the WEP 64 bit encryption and the Airport Utility does not have this...it has 40 bit. Is this a problem, or do I have to be using a the same type of encrytion ?
WEP is available in either 40 or 104-bit, but is usually "advertised" as either 64- or 128-bit respectively. For example, 64-bit WEP uses a 40 bit key (also known as WEP-40), which is concatenated with a 24-bit initialization vector (IV) to form the 64-bit RC4 traffic key. So, WEP 64 on the Linksys & 40-bit is equivalent.
What concerns me more is the loss of bandwidth performance you are experiencing when connecting the AX. When the AX is configured as a wireless client it is acting just like any other wireless devices (computer, laptop, printer, etc.) and not like another router. This should cause little or no bandwidth loss. True the more secure the wireless encryption used WPA2 vs. WEP, the more overhead is required for security, but the differences you are seeing seem excessive.
It is very possible that you may have some form of Wi-Fi interference in the immediate area that is preventing your Linksys from providing a good clean signal.
I suggest you perform a simple site survey, using utilities like the following to determine potential areas of interference, and then, try to either eliminate or significantly reduce them where possible:
For Macs:
o MacStumbler
o iStumbler, or
For PCs:
o NetStumbler

My MacPro OS 10.6.8 cannot connect to my wireless HP Officejet 6500APlus printer. It sees internet modem. Hp went thru all it's procedures, including new uploaded Driver. Utilitie tool found no issues. Now what?

Similar Messages

Maybe you are looking for