My MBA keep downloading and uploading with no obvious reason?

Here is a link to the original post https://discussions.apple.com/thread/3015185
I will go crazy over this one! The problem started almost 10 days ago .
My Mac Book air keeps downloading and uploading KBs ranging from 2 KBsto 30 KBs Ups and Downs (see the attachment please ).
I'm living currently in Amman/Jordan and using Orange 3G+ USB dongle and InternetEverywhere software to connect (check the screen shot).
I also installed Protemac and there was no app I tracked which was the reasonbehind the constant download/upload during idle time .
I did everything; formatted and clean installed Os X , installed antivirus(nothing found ),checked the USB dongle with Windows 7 operating system and tomy surprise everything is fine .
I tried to reinstall the driver many times from http://www.orange.jo/en/software.php and again nothing has changed the same behavior again !
I called Orange tech support and they said if there is no  problem with Windows 7 there is nothing that we can do .
What I have noticed is that when I connect to internet the Orange software only downoald 11 KBs and then stopped ,the preoblem start when I open a page on firefox or Safari and then after seconds the activity monitor start to regestier upload and downalod activity (both ways) ranging from 3 KBs ups and 3 KBs downn to 25 KBs Ups and 25 KBs down , this is just like a loop activity .
Should I leave this problem to eat all my bandwidth threshold ,is their something wrong with my MBA ( I hope not )
Please help me with this .

Here is a snap shot of CPA - Cocoa Packet Analyzer,the thing is that I don't know how to translate the packets being sent or received

Similar Messages

  • My MBA keep downloading and uploading at idle time

    I will go crazy over this one! The problem started almost 10 days ago .
    My Mac Book air keeps downloading and uploading KBs ranging from 2 KBsto 30 KBs Ups and Downs (see the attachment please ).
    I'm living currently in Amman/Jordan and using Orange 3G+ USB dongle and InternetEverywhere software to connect (check the screen shot).
    I also installed Protemac and there was no app I tracked which was the reasonbehind the constant download/upload during idle time .
    I did everything; formatted and clean installed Os X , installed antivirus(nothing found ),checked the USB dongle with Windows 7 operating system and tomy surprise everything is fine .
    I tried to reinstall the driver many times from http://www.orange.jo/en/software.php and again nothing has changed the same behavior again !
    I called Orange tech support and they said if there is no  problem with Windows 7 there is nothing that we can do .
    What I have noticed is that when I connect to internet the Orange software only downoald 11 KBs and then stopped ,the preoblem start when I open a page on firefox or Safari and then after seconds the activity monitor start to regestier upload and downalod activity (both ways) ranging from 3 KBs ups and 3 KBs downn to 25 KBs Ups and 25 KBs down , this is just like a loop activity .
    Should I leave this problem to eat all my bandwidth threshold ,is their something wrong with my MBA ( I hope not )
    Please help me with this .

    Thanks Tuttle,
    Any way I tried today Virus Barrier 6 and it here are some screen shot,it seems that my mac is keep sending or receiving packets from this ip 10.139.142.71  or 212.202.105.83
    Thanks Tuttle ,
    Here are another screen shots :
    I tried to block those ips but nothing happened .

  • After hours of back-up, downloading and uploading...I am now updated with all the latest Mac software. However, I no longer have access to Excel and Word. Is there a way I can access my documents in either of those? Help, please.

    After hours of back-up, downloading and uploading...I am now updated with all the latest Mac software. However, I no longer have access to Excel and Word. Is there a way I can access my documents in either of those? Help, please.

    If you have older versions of excel and word that previously ran under the Rosetta emulator (allows PowerPC code to run on Intel system), they will no longer work with Lion.
    You can use the Apple programs Pages and Numbers to access the files. They can be bought and downloaded from the App store. NeoOffice is available at http://www.neooffice.org/neojava/en/index.php which has Lion support. OpenOffice doesn't talk to Lion support, it's at http://www.openoffice.org/

  • Can anyone explain how to download and upload TROY ECF fonts with SAP

    Can anyone explain how to download and upload TROY ECF fonts with SAP.I have downloaded ECF font from TROY wesite as TTF format. but it is not getting upload with SAP.please kindly help me on this issue..

    Hi,
    You can use the SE73 Transaction and upload your TTF files.
    Please check the link here for more details:
    http://help.sap.com/saphelp_nw70/helpdata/en/36/5b3438fd263402e10000009b38f8cf/frameset.htm
    Regards,
    Siddhesh

  • How to download and upload TROY ECF fonts with SAP for check printing

    Can anyone explain how to download and upload TROY ECF fonts with SAP.I have downloaded  ECF font from TROY wesite as TTF format. but it is not getting upload with SAP.please kindly help me on this issue..

    Hi,
    You can use the SE73 Transaction and upload your TTF files.
    Please check the link here for more details:
    http://help.sap.com/saphelp_nw70/helpdata/en/36/5b3438fd263402e10000009b38f8cf/frameset.htm
    Regards,
    Siddhesh

  • PO header attachment download and upload

    Hi All,
    I have requirement to download the attachments attached at Purchase Orders(PO) header level . And then from the downloaded file , I further want to upload it to another target system.
    I have already uploaded the PO at target system but header level attachments were missed out.
    My source and target system is in Ver 4.6C
    Please let me know -
    1. All tables that are involved in storing the attachments at header level for purchase orders.With this I can upload attachments directly to the target system tables.
    2.Any Function module for download and upload the attachments of PO at header level.
    I will appreciate any help to do this .
    Thanks
    Deepak

    Hi ,
    Thanks for suggestion.I Have used FM SO_ATTACHMENT_INSERT to insert Attachment. SOOD table is getting updated. But still PO header level attachment is missing. I think FM only update the table SOOD and do not ensure to put the attachment to the right Purchase order.
    Please let me know if you have an Idea how to put attachments to PO header level.Let me know tables that can be directly updated in order to attach the attachment to PO header level.
    Thanks
    Deepak

  • Hierarchy download and upload

    Hi experts,
    i want to download hierarchies from production bw to development bw. pls explain me the procedure how to do. as i understand hierarchies will be in the r/3 system. then how do i download them and upload them to the required box in bw. is there any function module for downloading and uploading hierarchies.
    Pls help.....

    Hello,
    To execute the program you have to run it in transaction se38.
    Check if you have it since it is Z you might not have it.
    If you don't find it create in se38 a new program with the following code:
    *& Report  Z_SAP_HIERARCHY_DOWNLOAD                                    *
    * SAP Consulting BW Tools:
    * Download hierarchy into a flat file. The file has the correct format
    * for uploading into BW via a hierarchy InfoSource (IDOC).
    * (c) SAP AG 2003-2004 MFB, SAP Labs LLC
    * created: 2003-07-23
    * last update: 2004-05-02
    * Text elements:
    * P_DATES Include from/to dates
    * P_DATETO Valid-to date
    * P_FNAME File name
    * P_HIENM Hierarchy name
    * P_INTER Include from/to leaves
    * P_IOBJNM InfoObject
    * P_LANGU Language
    * P_VERS Hierarchy version
    REPORT z_sap_hierarchy_download.
    TYPE-POOLS: rs, rsdm, rrh1.
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
    PARAMETERS:
    p_iobjnm TYPE rsdiobjnm MEMORY ID rsc.
    SELECTION-SCREEN END OF BLOCK b1.
    SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME.
    PARAMETERS:
    p_hienm TYPE rshiedir-hienm,
    p_vers TYPE rshiedir-version,
    p_dateto TYPE rshiedir-dateto,
    p_langu TYPE rshiedirt-langu.
    SELECTION-SCREEN END OF BLOCK b2.
    SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME.
    PARAMETERS:
    p_fname LIKE rlgrap-filename,
    p_dates AS CHECKBOX DEFAULT 'X',
    p_inter AS CHECKBOX DEFAULT 'X'.
    SELECTION-SCREEN END OF BLOCK b3.
    * File structure
    TYPES:
    * No dates/intervals
    BEGIN OF y_s_hierfile_1,
    nodeid TYPE rshienodid,
    iobjnm TYPE rsiobjnm,
    nodename TYPE rsnodename,
    * tlevel TYPE rstlevel,
    link TYPE rslink,
    parentid TYPE rsparent,
    childid TYPE rschild,
    nextid TYPE rsnext,
    langu TYPE langu,
    txtsh TYPE rstxtsh,
    txtmd TYPE rstxtmd,
    txtlg TYPE rstxtlg,
    END OF y_s_hierfile_1,
    y_t_hierfile_1 TYPE STANDARD TABLE OF y_s_hierfile_1,
    * With dates
    BEGIN OF y_s_hierfile_2,
    nodeid TYPE rshienodid,
    iobjnm TYPE rsiobjnm,
    nodename TYPE rsnodename,
    * tlevel TYPE rstlevel,
    link TYPE rslink,
    parentid TYPE rsparent,
    childid TYPE rschild,
    nextid TYPE rsnext,
    dateto TYPE rsdateto,
    datefrom TYPE rsdatefrom,
    langu TYPE langu,
    txtsh TYPE rstxtsh,
    txtmd TYPE rstxtmd,
    txtlg TYPE rstxtlg,
    END OF y_s_hierfile_2,
    y_t_hierfile_2 TYPE STANDARD TABLE OF y_s_hierfile_2,
    * With intervals
    BEGIN OF y_s_hierfile_3,
    nodeid TYPE rshienodid,
    iobjnm TYPE rsiobjnm,
    nodename TYPE rsnodename,
    * tlevel TYPE rstlevel,
    link TYPE rslink,
    parentid TYPE rsparent,
    childid TYPE rschild,
    nextid TYPE rsnext,
    leafto TYPE rsleafto,
    leaffrom TYPE rsleaffrom,
    langu TYPE langu,
    txtsh TYPE rstxtsh,
    txtmd TYPE rstxtmd,
    txtlg TYPE rstxtlg,
    END OF y_s_hierfile_3,
    y_t_hierfile_3 TYPE STANDARD TABLE OF y_s_hierfile_3,
    * With dates/intervals
    BEGIN OF y_s_hierfile_4,
    nodeid TYPE rshienodid,
    iobjnm TYPE rsiobjnm,
    nodename TYPE rsnodename,
    * tlevel TYPE rstlevel,
    link TYPE rslink,
    parentid TYPE rsparent,
    childid TYPE rschild,
    nextid TYPE rsnext,
    dateto TYPE rsdateto,
    datefrom TYPE rsdatefrom,
    leafto TYPE rsleafto,
    leaffrom TYPE rsleaffrom,
    langu TYPE langu,
    txtsh TYPE rstxtsh,
    txtmd TYPE rstxtmd,
    txtlg TYPE rstxtlg,
    END OF y_s_hierfile_4,
    y_t_hierfile_4 TYPE STANDARD TABLE OF y_s_hierfile_4.
    * Hierarchy definition
    DATA:
    g_s_hiesel TYPE rsndi_s_hiesel,
    g_s_hiedir TYPE rsndi_s_hiedir,
    g_subrc TYPE sy-subrc,
    g_t_hiedirt TYPE TABLE OF rshiedirt,
    g_s_hierstruc TYPE rssh_s_htab,
    g_t_hierstruc TYPE TABLE OF rssh_s_htab,
    g_s_thiernode TYPE rsthiernode,
    g_t_thiernode TYPE TABLE OF rsthiernode WITH KEY langu hieid objvers
    nodename,
    g_s_hierintvl TYPE rssh_s_jtab,
    g_t_hierintvl TYPE TABLE OF rssh_s_jtab WITH KEY hieid objvers nodeid,
    g_s_message TYPE rsndi_s_message,
    g_t_message TYPE TABLE OF rsndi_s_message,
    g_s_chavlinfo TYPE rsdm_s_chavlinfo,
    g_t_chavlinfo TYPE rsdm_t_chavlinfo.
    * File
    DATA:
    g_fname TYPE string,
    g_struct_s TYPE string,
    g_struct_t TYPE string,
    gr_s_file TYPE REF TO data,
    gr_t_file TYPE REF TO data.
    FIELD-SYMBOLS:
    <g_langu> TYPE ANY,
    <g_s_file> TYPE ANY,
    <g_t_file> TYPE STANDARD TABLE.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_iobjnm.
      CALL FUNCTION 'RSD_IOBJ_F4'
        EXPORTING
          i_show_cha    = rs_c_true
          i_objvers     = rs_c_objvers-active
          i_hietabfl    = rs_c_true
        CHANGING
          c_iobjnm      = p_iobjnm
        EXCEPTIONS
          illegal_input = 1.
      CHECK sy-subrc = 0.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_hienm.
      DATA:
      l_s_hiertxt TYPE rrh1_s_hiertxt,
      l_t_hiertxt TYPE rrh1_t_hiertxt.
      CALL FUNCTION 'RRH1_HIERARCHY_HELP_VALUES_GET'
        EXPORTING
          i_iobjnm          = p_iobjnm
          i_dateto          = p_dateto
          i_hienm           = p_hienm
          i_version         = p_vers
        IMPORTING
          e_t_hiertxt       = l_t_hiertxt
        EXCEPTIONS
          no_f4_available   = 1
          dialogue_canceled = 2
          OTHERS            = 3.
      CHECK sy-subrc = 0.
      READ TABLE l_t_hiertxt INTO l_s_hiertxt INDEX 1.
      CHECK NOT l_s_hiertxt IS INITIAL.
      p_hienm = l_s_hiertxt-hienm.
      DATA:
      l_s_dynpfields TYPE dynpread,
      l_t_dynpfields TYPE STANDARD TABLE OF dynpread.
      CLEAR: l_t_dynpfields, l_s_dynpfields.
      l_s_dynpfields-fieldname = 'P_VERS'.
      WRITE l_s_hiertxt-version TO l_s_dynpfields-fieldvalue.
      APPEND l_s_dynpfields TO l_t_dynpfields.
      l_s_dynpfields-fieldname = 'P_DATETO'.
      WRITE l_s_hiertxt-dateto TO l_s_dynpfields-fieldvalue.
      APPEND l_s_dynpfields TO l_t_dynpfields.
      CALL FUNCTION 'DYNP_VALUES_UPDATE'
        EXPORTING
          dyname     = sy-repid
          dynumb     = sy-dynnr
        TABLES
          dynpfields = l_t_dynpfields.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fname.
      DATA:
      l_filename1 TYPE string,
      l_filename2 TYPE string,
      l_path TYPE string,
      l_fullpath TYPE string,
      l_action TYPE i.
      l_filename1 = p_fname.
      CALL METHOD cl_gui_frontend_services=>file_save_dialog
      EXPORTING
      window_title = 'Select Download File'
      default_extension = 'txt'
      default_file_name = l_filename1
      file_filter = 'All Files (*.*)|*.*|Text files (*.txt)|*.txt'
      CHANGING
      filename = l_filename2
      path = l_path
      fullpath = l_fullpath
      user_action = l_action
      EXCEPTIONS
      cntl_error = 1
      OTHERS = 2.                                               "#EC NOTEXT
      CHECK sy-subrc = 0.
      CALL METHOD cl_gui_cfw=>flush.
      IF l_action = 0.
        p_fname = l_fullpath.
      ENDIF.
    INITIALIZATION.
      GET PARAMETER ID 'RSC' FIELD p_iobjnm.
    START-OF-SELECTION.
    * Check input
      CHECK NOT p_fname IS INITIAL.
      IF p_langu IS INITIAL.
        p_langu = sy-langu.
      ENDIF.
      IF p_dateto IS INITIAL.
        p_dateto = '99991231'.
      ENDIF.
    * Read hierarchy
      CLEAR g_s_hiesel.
      g_s_hiesel-objvers = rs_c_objvers-active.
      g_s_hiesel-hienm = p_hienm.
      g_s_hiesel-version = p_vers.
      g_s_hiesel-iobjnm = p_iobjnm.
      g_s_hiesel-dateto = p_dateto.
      CALL FUNCTION 'RSNDI_SHIE_STRUCTURE_GET'
        EXPORTING
          i_s_hiesel        = g_s_hiesel
          i_no_nodenm_table = rs_c_true
        IMPORTING
          e_s_hiedir        = g_s_hiedir
          e_subrc           = g_subrc
        TABLES
          e_t_hiedirt       = g_t_hiedirt
          e_t_hierstruc     = g_t_hierstruc
          e_t_thiernode     = g_t_thiernode
          e_t_hierintvl     = g_t_hierintvl
          e_t_message       = g_t_message.
      IF g_subrc <> 0.
        READ TABLE g_t_message INTO g_s_message INDEX 1.
        IF sy-subrc = 0.
          MESSAGE ID g_s_message-msgid TYPE 'I' NUMBER g_s_message-msgno
          WITH g_s_message-msgv1 g_s_message-msgv2
          g_s_message-msgv3 g_s_message-msgv4.
        ELSE.
          MESSAGE ID 'RSBO' TYPE 'I' NUMBER 899
          WITH 'Hierarchy read error'.
        ENDIF.
        EXIT.
      ENDIF.
    * Defined output structures
      IF p_dates IS INITIAL AND p_inter IS INITIAL.
        g_struct_s = 'Y_S_HIERFILE_1'.
        g_struct_t = 'Y_T_HIERFILE_1'.
      ELSEIF p_dates = 'X' AND p_inter IS INITIAL.
        g_struct_s = 'Y_S_HIERFILE_2'.
        g_struct_t = 'Y_T_HIERFILE_2'.
      ELSEIF p_dates IS INITIAL AND p_inter = 'X'.
        g_struct_s = 'Y_S_HIERFILE_3'.
        g_struct_t = 'Y_T_HIERFILE_3'.
      ELSE.
        g_struct_s = 'Y_S_HIERFILE_4'.
        g_struct_t = 'Y_T_HIERFILE_4'.
      ENDIF.
      CREATE DATA gr_s_file TYPE (g_struct_s).
      ASSIGN gr_s_file->* TO <g_s_file>.
      CREATE DATA gr_t_file TYPE (g_struct_t).
      ASSIGN gr_t_file->* TO <g_t_file>.
    * Nodes
      REFRESH <g_t_file>.
      LOOP AT g_t_hierstruc INTO g_s_hierstruc.
        CLEAR <g_s_file>.
        MOVE-CORRESPONDING g_s_hierstruc TO <g_s_file>.
    * Texts for nodes
        READ TABLE g_t_thiernode INTO g_s_thiernode WITH TABLE KEY
        langu = p_langu
        hieid = g_s_hierstruc-hieid
        objvers = rs_c_objvers-active
        nodename = g_s_hierstruc-nodename.
        IF sy-subrc = 0.
          MOVE-CORRESPONDING g_s_thiernode TO <g_s_file>.
        ELSE.
    * Texts for characteristic values
          REFRESH g_t_chavlinfo.
          CLEAR g_s_chavlinfo.
          g_s_chavlinfo-c_chavl = g_s_hierstruc-nodename.
          APPEND g_s_chavlinfo TO g_t_chavlinfo.
          CALL FUNCTION 'RSD_CHAVL_READ_ALL'
            EXPORTING
              i_iobjnm                  = g_s_hierstruc-iobjnm
              i_langu                   = p_langu
              i_dateto                  = p_dateto
              i_check_value             = space
              i_sid_in                  = space
              i_hieid                   = g_s_hiedir-hieid
              i_objvers                 = g_s_hiedir-objvers
            CHANGING
              c_t_chavlinfo             = g_t_chavlinfo
            EXCEPTIONS
              info_object_not_found     = 1
              routines_generation_error = 2
              check_table_not_existing  = 3
              text_table_not_existing   = 4
              OTHERS                    = 5.
          IF sy-subrc = 0.
            READ TABLE g_t_chavlinfo INTO g_s_chavlinfo INDEX 1.
            IF sy-subrc = 0.
              MOVE-CORRESPONDING g_s_chavlinfo-e_chatexts TO <g_s_file>.
              ASSIGN COMPONENT 'LANGU' OF STRUCTURE <g_s_file> TO <g_langu>.
              IF sy-subrc = 0.
                <g_langu> = p_langu.
              ENDIF.
            ENDIF.
          ENDIF.
        ENDIF.
    * Intervals
        IF g_s_hierstruc-intervl = 'X' AND p_inter = 'X'.
          READ TABLE g_t_hierintvl INTO g_s_hierintvl WITH TABLE KEY
          hieid = g_s_hierstruc-hieid
          objvers = rs_c_objvers-active
          nodeid = g_s_hierstruc-nodeid.
          IF sy-subrc = 0.
            MOVE-CORRESPONDING g_s_hierintvl TO <g_s_file>.
          ENDIF.
        ENDIF.
        APPEND <g_s_file> TO <g_t_file>.
      ENDLOOP.
    * Download output table
      g_fname = p_fname.
      CALL FUNCTION 'GUI_DOWNLOAD'
        EXPORTING
          filename                = g_fname
          write_field_separator   = space
        TABLES
          data_tab                = <g_t_file>
        EXCEPTIONS
          file_write_error        = 1
          no_batch                = 2
          gui_refuse_filetransfer = 3
          invalid_type            = 4
          no_authority            = 5
          unknown_error           = 6
          header_not_allowed      = 7
          separator_not_allowed   = 8
          filesize_not_allowed    = 9
          header_too_long         = 10
          dp_error_create         = 11
          dp_error_send           = 12
          dp_error_write          = 13
          unknown_dp_error        = 14
          access_denied           = 15
          dp_out_of_memory        = 16
          disk_full               = 17
          dp_timeout              = 18
          file_not_found          = 19
          dataprovider_exception  = 20
          control_flush_error     = 21
          OTHERS                  = 22.
      IF sy-subrc = 0.
        MESSAGE ID 'RSBO' TYPE 'I' NUMBER 899
        WITH 'Hierarchy download successful!'.
      ELSE.
        MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
        WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    Diogo

  • Function module to choose the file for download and upload

    what is the function module to choose the file for download and upload  for presentation server.
    give me with example

    Please search in SCN.
    This has been discussed so many times.

  • Download and upload program

    Hello to everybody,
    I'm looking for a standard program that can download and upload program' source codes. I found the program REPTRAN (in SAP release 6.0) that can only download the source code (with the include as well), but i didn't find the upload one.
    So, does anyone knows if exist a standard program that can download source codes (comprensive of include) and upload it as well?
    Thanks and bye..

    Hi,
    Here is code which read the Programs & download:
    Here Just pass the itab "SOURCE" into WS_DOWNLOAD.
    function zuplt01f_tr.
    *"*"Local interface:
    *"  IMPORTING
    *"     REFERENCE(PROGRAM_NAME) TYPE  SYREPID
    *"  TABLES
    *"      SOURCE
      data: f(240) type c,
            g type i,
            h(72) type c,
            low type i   .
      read report program_name into source . " state 'A'.
      describe table source  lines count.
    endfunction.
    Raja T

  • Download and upload speed per ssid in air-sap2602.

    Dear team,
    How to limit the download and upload speed per ssid in air-sap2602 ?
    SSID =5MB download + 1upload
    SSID= 30MB download + 5upload
    Regards

    If you need help with traffic shaping, you should post your question on the rLAN, Switching and Routing forum:
    https://supportforums.cisco.com/community/netpro/network-infrastructure/switching
    You can also look for examples by searching Configure 1941 traffic shaping:
    http://www.cisco.com/en/US/docs/ios/12_2/qos/configuration/guide/qcfgts.html
    http://www.cisco.com/en/US/docs/ios/12_2/qos/configuration/guide/qcfcbshp.html
    Thanks,
    Scott
    Help out other by using the rating system and marking answered questions as "Answered"

  • I have the Jetpack 4GLTE, what is the Mbps download and upload speeds for this device?

    I have the Jetpack 4GLTE, what is the Mbps download and upload speeds for this device?

    The avgrage real speed will be more in the area of 25 to 38 Mbps  You would need to be in a strong signal area with high grade cell tower service and low customer use to even reach 50 Mbps. 
    From Verizon page.  Just be aware that using the MiFi 6620L can cost a lot of money. And you can thank the device's fast performance for that. In my testing around the San Francisco Bay Area, rathe device delivered blazing-fast download speeds that nged between around 10Mbps to around 40Mbps. At those speeds, you can burn through 4GB of data in just less than an hour. Once you reach the cap, of course, you'll have to pay somewhere between $10 to $15 for each additional gigabyte, depending on the plan you sign up for. 
      For more information follow link:  Verizon Ellipsis Jetpack MHS800L | Verizon Wireless

  • My download and upload speed is half that of my laptop

    My download and upload speed is half that of my laptop. I looked on a forum and it suggested that the new version of IOS might solve the problem, but I have updated to the latest and it hasn't.  It is erratic, and I have to move my ipad round to get a signal in some parts of the house, whereas the laptop works very fast right next to it.

    Problem solved. The culprit is the VZ issued Actiontec Modem-Router-Access Point.
    I have doubt from the beginning that the problem is caused by my wifi adapter b/c it has always performed very well from the start. Upon more research on the web, I see that there are a lot of people having the exact problem as I do with their FiOS internet. I found some  users who solved the problem with the same solution so I decide to try the same.
    When I switched to FiOS, I took away my Asus N router b/c the VZ supplied Actiontec is a N router and AP also. Now, I turn off wireless in the Actionteach and hook up my Asus N router to it to use it as the AP. Boom! Now I get the full provisioned 50/25 speed and then some with both wired and wireless (and, my upstairs office is getting 40/20 wirelessly when before it used to be only about 15/10 using the Actiontec AP). Turning off the Asus and turning the Actiontech wireless back on and the wireless drops back down to 25/15. So it is pretty clear to me that somehow the Actiontec is not performing the way it should.
    (In the Asus N router, in additional to the option of setting the wireless mode to b, g, n, there is also an option to select the wireless speed of up to 11, 54, 72 or 150. When I select “Up to 72 Mbps”, I get the same wireless speed as when I use the Actiontec AP which is only about 25/15. When I set the Asus speed to “Up to 150” I get the full provisioned speed of 50/25. So I look into the Actiontec but there is no such option beside the option to configure the b, g, n modes.)
    I don’t think they give me a bump unit of the Actiontec b/c this problem is rather widespread. So, either there is a problem with this entire line of model of Actiontec or that there is a setting (or settings) in it that prevent it from performing the way it should but I look and look and can’t find any relevant setting.

  • Troubleshoting help needed:  My iMac keeps crashing and restarting with a report detail: "spinlock application timed out"  What can I do to fix this?timed out"

    Troubleshooting help needed:  My iMac keeps crashing and restarting with a notice: "Spinlock application timed out"  What can I do?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
    Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

  • I received an ipod touch 5th gen for Christmas.  The first songs i've downloaded and synced with my touch have created ghost songs.  They are only on my computer in itunes once but appear on my ipod twice, one copy that won't play.  I can't delete them

    The first songs i've downloaded and synced with my new touch have created ghost songs.  They are only on my computer in itunes once but appear on my ipod twice, one copy that won't play.  I can't delete them.  I've tried unticking all the music that was on the ipod via itunes and re-syncing, which in theory should delete all music from my ipod.  It does except for the 5 ghost songs.   So at present I have no music on ipod except the 5 ghost songs.   Has anyone got any ideas how I can get rid of these?  
    I had no problems with my ipod touch 4th, which I had for years.   Any help would be great.  

    iOS: Device not recognized in iTunes for Mac OS X
    Or
    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or                     
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • TS2446 If i create a new apple id account on my ipod, will i still have all my music, apps, books and other stuff on my ipod that i downloaded and bought with my old account or will i loose everything; will i be able to still do the updates to those apps?

    If I create a new apple id account on my ipod, will I still have all my music, apps, books and other stuff on my ipod that I downloaded and bought with my old account or will I loose everything; will I be able to still do the updates to those apps?
    I really need help!

    I don't think you understood what I wrote. You don't HAVE to pay for everything if you are happy with using the other account for updates, etc. But if you don't want to do that then you will have to buy new copies of everything for the new account. There's only one purchase item per account, but you can redownload an item in the account many times.
    The idea is this:
    One computer, multiple devices, one Apple ID.
    One user, multiple devices, one Apple ID.
    The basic idea is that each user has an Apple ID under which he/she can manage multiple devices on a single computer.
    Once you step outside of that model you create such problems as not being able to use or update apps purchase under one Apple ID when using a different Apple ID. Or not being able to easily sync one device on more than one computer.

Maybe you are looking for