My Mic Isn't Working!! Please Help!!

I wasn't sure where to post for this but I just bought the Live! Cam Chat WebCam and installed everything and followed the instructions and everything works except for the Mic that came with the package. I didn't see any instructions or any installation programs that needed to be installed for the Mic itself and I need help getting this figured out. Can someone please help me?

ok, i feel a little dumb...hehe...i figured it out though i looked in the wrong section of the settings hehe I did get it working though?

Similar Messages

My mic is not working please help, my mic is not working please help

my mic is broken i think at first i thaught it was cloged so i put a pin in it but it still would not work . i did get water on my ipod 5 but i dont understand why it only affected my mic intead of anything else please help me anyone

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. Ither the water damaged the mic or the pin did.
Apple Retail Store - Genius Bar

The bottom part of my iPod screen isn't working please help!?

going to an apple store is out of the question. there is none near me. please help!

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Or you can sent it to Apple. See:
Apple - Support - iPod - Service FAQ
Or Google for third-party repair place.

ITunes store isn't working :( Please help!!

Downloaded new version of iTunes (11.3.1.8) for my Windows 8 laptop. Blank screen. Help please??

You can't change back to the U.S. Store without a credit card or at least a gift card, or any valid payment method.
The none option would only appear when you create accounts. The iTunes Store requires that you provide a payment method and a billing address to change stores in order to validate your residency in the country you're changing to.

HT4993 Updated to iOs 7.1.1 and now my iphone 5s touch tone isn't working - please help

I updated to 7.1.1 yesterday and now my in call touch tone isnt working - very annoying. Tried a reset and reset the keybvoard. Niether worked

Is the device on mute?
Are keyboard sounds enabled?

The built-in mic in g50 122ca laptop model is not working. please help me out.

the built-in mic in g50 122ca laptop model is not working. please help me out. OS: Windows Vista (32-bit)

here is a sample code .
so far you procedure looks good but
i bet you have to specify the name of report , instead of 'filename'.
see this
Plist_id := GET_PARAMETER_LIST('P_name');
IF NOT ID_NULL(Plist_id) THEN
DESTROY_PARAMETER_LIST(Plist_id);
END IF;
Plist_id := CREATE_PARAMETER_LIST('P_name');
ADD_PARAMETER( Plist_id, 'P_Receive_date', TEXT_PARAMETER, TO_CHAR(Receive_date,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Hearing_date', TEXT_PARAMETER, TO_CHAR(Hearing_date,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Hearing_time', TEXT_PARAMETER, TO_CHAR(Hearing_time,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Issue_date', TEXT_PARAMETER, TO_CHAR(Issue_date,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Workshop_date', TEXT_PARAMETER, TO_CHAR(Workshop_date,'mm/dd/yyyy'));
-- RUN_PRODCT(REPORTS,'..\Reports\Pro_License',SYNCHRONOUS, RUNTIME, FILESYSTEM, Plist_id, NULL);
-- here Pro_License is the name of report.
did you tried to see if the parameter passed using a message ?
try
message('parameter name'); pause; write this before "run_report".

I turned my imessage off, and now when i try to turn it on it isn't working, any help please?:)

i turned my imessage off, and now when i try to turn it on it isn't working, any help please?:)

See if your Mac will boot from the install DVD.
Then uninstall Internet Cleanup.
Allan

I've re installed itunes but my ipod isn't recognised Please help!!!

Ive installed itunes 10.5 and my ipod isn't being recognised I've done the recovary thing but it doesn't work please help me i need new music

http://support.apple.com/kb/ht1808
http://support.apple.com/kb/ts1567
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

Hey, I wanna download Lion for free, so i need UP-TO-DATE , but it do not works , please help

Hey, I wanna download Lion for free, so i need UP-TO-DATE , but it do not works , please help

I think you misunderstood the guy. The up-to-date program isn't working for a lot of people. I'm eligible for the free upgrade but it fails to recognise my serial. From what I've read, this is affecting a lot of people who purchased their computers online. Apple seems to be fixing the issue though, so my advice would be to keep trying. Alternatively, click on the manual verificaton link so they can check your order for you and send the redemption code after they do.

My send button on messaging isn't working any help out there?

My send button isn't working, any help?

Hello monti221! Nothing is more frustrating than a phone that's not operating correctly. I want to help! Thank you gina7239 for your valuable input. My suggestion would be to complete a "restore" of your device. Using iTunes will ensure that all of your data is saved. If you need instructions please select the link and select iPhone support.. http://bit.ly/y5iuoj Let me know if this helps!
ChaunceyM_VZWSupport
Follow us on twitter @VZWSupport

I have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me

i have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me???

If Join was on then your home wi-fi must be set to Non-Broadcast. If you did not set this up (maybe your provider did) then you will need to find the Network Name they used, and any password they used. The SSID is Security Set ID and to see more try http://en.wikipedia.org/wiki/SSID . Basically it is the name used to identify your router/network. A lot of times the installer will leave it set as LinkSys, or Broadcom or whatever the manufacturer set it as for default. Your best bet is to get whoever installed it to walk you through how they set it up, giving you id's and passwords so you can get in. HOWEVER, if you are not comfortable with this (if you set security wrong, etc.) you would be well ahead of the game to hire a local computer tech (networking) to get this working for you. You can also contact the vendor of your router and get help (if it is still in warranty), or at least get copies of the manuals as pdf files. Sorry I can't give you more help, I hope this gives you an idea where to go from here to find more.

HT201412 my iphone 4s does not start by power switch, it starts when i connect to pc. the proximity sensor is not working. please help

my iphone 4s does not start by power switch, it starts when i connect to pc. the proximity sensor is not working. please help.

Sounds like it may be a hardware issue.
Please contact Apple Support in your country.
Here is a list of numbers: http://support.apple.com/kb/HE57
Regards
J

I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4

I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4

I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4

I have 4s iPhone , I download the iOS 7. Now the front receiver microphone is not working , please help me that how to fix the problem.

I have 4s iPhone , I download the iOS 7. Now the front receiver microphone is not working , please help me that how to fix the problem.

I live in South Africa, and I had the same problem with my iPhone 4.
After weeks of frustration and swearing, I was in the process of restoring my phone to a previous iOS. To do that you need to turn the "Find my iPhone" option off, since i turned it off, my problem was solved. No need to repair anything or revert back to old iOS.
***** that i cant use Find my iPhone, but atleast i can use my phone.

I installed windows 7 on my macbook pro. all is working but lan adaptor and sound od laptop is not working. please help me or send the link where i can download the these drivers.

I installed windows 7 on my macbook pro. all is working but lan adaptor and sound od laptop is not working. please help me or send the link where i can download the these drivers.I have lost my resource cd .

If you are running Lion or Mountain Lion, the drivers are downloaded from within Bootcamp Assistant. If you are running Snow Leopard the drivers are on your Snow Leopard install disk.
Read the Bootcamp Install Guide for your version of OSx. http://www.apple.com/support/bootcamp/
Bootcamp questions should be asked in the Bootcamp forum where the Bootcamp gurus hang out https://discussions.apple.com/community/windows_software/boot_camp

HT1554 Apparently, I don't know my "com.apple.smig keychain" password. And I'm in the middle of setting up my new Mac mini. I transferred data from my MacBook and what I thought was the password isn't working! Help!!

Apparently, I don't know my "com.apple.smig keychain" password. And I'm in the middle of setting up my new Mac mini. I transferred data from my MacBook and what I thought was the password isn't working! Help!!

Hello,
See if this helps...
Mac OS X 10.4 Help, I forgot a password in my Keychain
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1960.html
Mac OS X 10.4: Keychain Access asks for keychain "login" after changing login password...
http://support.apple.com/kb/HT1631
Resetting your keychain in Mac OS X...
If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
http://support.apple.com/kb/TS1544

My Mic Isn't Working!! Please Help!!

Similar Messages

Maybe you are looking for