My Mid 2009 Macbook pro (Just purchased) will not turn on after hard drive change and ram upgrade

So i purchased a mid 2009 Macbook Pro from a guy with 4 gb of ram and 250gb hard drive. It worked perfectly fine when i booted it with his hard drive and ram installed.
I spilled beer in my old computer (late 2009 15" 500gb hard drive and 8gb ram) but took the hard drive to get tested and it worked fine. i later found out it was from a 2010.
Like an idiot i assumed the pro i just purchased would be able to handle the same upgrades that were in my old computer so i threw in the 500gb hard drive (2010) and the 8gb of ram.
The thing booted up fine, just a bit slow which i chalked up to my hard drive sitting unplugged for a long time.
After about 3 minutes it crashed on me. Confused i replaced the 4gb of original ram back into it. (the 8gb ram was pny i bought from ebay so i thought it could be that) It decided not to turn on or show any lights on the front except for the battery meter.
After this i replaced the original hard drive and still NO LUCK!! im really mad because i am in desperate need of the information on my original 500gb hard drive and im afraid i have destroyed 2 computers and about $1K worth of cash out the window.
HELP please enlighten me on what i have done and if the situation can be fixed.

UPDATE: Problem solved with the old hard drive in it, Now the less pressing issue:
Will the computer run my 500gb hard drive with all my information on it? I need to forward a resume and it is on that hard drive.

Similar Messages

I was just given a Mid 2009 MacBook Pro. It does not have a system on it.

I have my original disks from my early 2009 MacBook Pro. When I try to use the OS Install disk to install 10.5, which is what the early MacBook came with, it won't boot the computer. I have the upgrade to 10.6.3, but it will not work either, since it is only an upgrade.
I have 10.6.8 backed up to an external disk, but I want to have a different administrator name so we don't get confused. I have used the backup to at least get the mid 2009 working. I am unable to do an Erase and Install, which is what I want to do, even though there is nothing there.
Here is the Hardware Overview from the mid 2009:
Hardware Overview:
Model Name:          MacBook Pro
Model Identifier:          MacBookPro6,2
Processor Name:          Intel Core i5
Processor Speed:          2.53 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache (per core):          256 KB
L3 Cache:          3 MB
Memory:          4 GB
Processor Interconnect Speed:          4.8 GT/s
Boot ROM Version:          MBP61.0057.B0A
SMC Version (system):          1.58f16
Serial Number (system):          W8******AGV
Hardware UUID:          42CB960E-B011-5E7A-A0A9-26E4E9B8FBCB
Sudden Motion Sensor:
State:          Enabled
Here is the Hardware Overview from the Early 2009:
Hardware Overview:
Model Name:          MacBook Pro
Model Identifier:          MacBookPro5,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.66 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          6 MB
Memory:          4 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          MBP51.007E.B06
SMC Version (system):          1.41f2
Serial Number (system):          W8*******1GA
Hardware UUID:          5D4EE93E-2E82-5554-934D-308E301FDC5E
Sudden Motion Sensor:
State:          Enabled
Is there any fix? Are the earlier, early 2009 disks incompatible with the mid 2009? Am I stuck with having the same Administrator for two computers? Does anyone have any suggestions?
There are compelling reasons that I don't want to upgrade past 10.6. I won't be able to get at MOST of my data because of Apple no longer supporting Rosetta. I have two other computers running Mountain Lion and Mavericks, but want to keep 10.6.8 on the MacBook Pros early and mid 2009.
<Personal Information Edited by Host>

Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Or you can purchase replacement discs from Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes
international calling numbers.
It's possible that even the retail copy of Snow Leopard will not work because that model came with a special build of Snow Leopard. You cannot install Leopard on that model.
Original OS
Mac OS X 10.6.3 (10D2063a)
Maximum OS
Latest release of OS X

Macbook Pro Early (2008) will not turn on!

I have same problem with my macbook pro early (2008)
I think is unfair to have this problems in the "perfect world notebook"
I hope you can help me on this
Regars,
Carlos.
---- MrAngel Discussion-----
Ok. It looks like does not matter what model is but anyway here is my specs:
Macbook Pro 15'
Model: A1260,
2.5 Ghz Core2Duo/2Gb/512 Mb Vram/250 GB 540RPM
I would like you review the following posts:
http://discussions.apple.com/thread.jspa?messageID=10071744&#10071744
My macbook pro won't turn on. I press the power button and the little light on the bottom goes white only while I hold it down, the second i don't it goes off. When I do hold it down for a few seconds first it will be solid for like 3 seconds then start flickering
http://discussions.apple.com/thread.jspa?messageID=10115278&#10115278
When i tried to turn on my mbp today it only turned on for like a second and then shuts off. The light on the front turns on and the battery is fully charged, but it just turns off in a second
http://discussions.apple.com/thread.jspa?messageID=10285598&#10285598
Hi, I have an Early 2008 Macbook Pro and I used it this morning but two hours later, I found it off. When I push the power button, the white light briefly comes on but it doesn't sound like it's starting up. When I hold the power button down, the white light comes on solid for about 5 seconds, then flashes rapidly. During this time I can hear the DVD drive and other components kick on, but once the rapid flashing stops, all power is lost again
The problem: Mac will not turn on.
1. If I hit the power button it is trying to start working (white light is blinking, HDD rotating, CD noise and so on), but gets shutdown as soon as I release my finger from the power button.
2. The maximum "Working" time is about 5 secs. During this time fans are working, white light is lighting, HDD working, CD does its usual noise. At the last two seconds white light starts flickering.
3. If I remove all memory slots it is working as usual!!!, I mean working without pressing a powerbutton constantly... and asking for a memory of course.
How it happened: well, it is usual thing then you are in hurry. Accidentally I hit restart. I didnt want mac to load again, so I did a force shutdown (5 secs an a power button). Thats it.
What I tried to do: I did all those "shaman" hotkeys to restart SMC. I spent a day!!! by driving around my city and asking Apple providers to fix it with no luck.
What I am planing to do:
1. I have an Apple service center here in the Tallinn who are ready to do some diagnostics. The only thing is - I dont trust them my HDD. So I am gonna clone my hard drive data somethere before they get my mac in their hands.
2. As soon as diagnistics is done I will get a price offer to fix it. It definitely wont be a cheap, since my mac is year and two months old (funny, two months and you are screwed).
3. If it will be too expencive I gonna do DIY repair.
What I would like to say to the Apple: please investigate that problem. The motherboard is definitely working. I can not fix it myself with no necessary equipments here, so I have to do expensive motherboard logic purchase.
Aleks

since my mac is year and two months old (funny, two months and you are screwed).
Not if you had of purchased Apple Care. You would have been covered for 3 years.
What I would like to say to the Apple:
This is not the place as Apple does not come to these forums.
These are user-to-user forums where everyday folk post "technical" questions and offer answers to each other voluntarily. No one here works for Apple nor does Apple get involved in responding. Not even sure if they "lurk."
"Say" it here -
Product Feedback

Have a MacBook Pro. the computer will not boot up, the screen has black and white stripes and multi color bands as well.

Have a MacBookPro. The computer will not boot up. the screen has black and white bands with multi color bands as well.

Yeah it's dead. Take it to an Apple Genius Bar and have it checked out. Then buy a new one.

MacBook Pro 13" (2011) will not wake up after it goes to sleep.

My new MacBook Pro goes to sleep like normal and then when I try to turn it back on the screen just stays black. I have turned off the put hard drive to sleep button and it is still doing it.

@hinote80: I ran into a wake problem with my new 17" MacBook Pro (early 2011). At first, I did the shutdown via the power button and then a restart, but that wasn't something I wanted to keep doing. I had also tried tapping on various keys on the keyboard but none of them seemed to wake it up (that approach always worked on my nearly 6-year-old PowerBook). I also tried moving around the Bluetooth Mighty Mouse (that I have paired with the MBP laptop) but that didn't work either.
While searching for another approach, I happened to click once on the mouse and that seemed to wake up the laptop everytime. So, now I'm doing that. If you don't have a mouse, maybe just tapping the scrollpad once (as if doing a click) would have the same effect. worth a try.
- David (your mileage may vary) PwrMc
:::::: if this doesn't work, then it was my evil twin who posted this!   ::::::::::
PS: @Baby Boomer: I love that bug creature crawling around on your sig!

Help ..my macbook pro late 2013, will not turn on..charger starts off green then immediately is out....it worked fine 2 days ago????

i have had a good experience with my macbook for a few years, when i downloaded osx, too many hanging issues, and now the battery, or charger will not work, no power ..just cannot get it to turn on

if you can borrow a charger from a friend, or go to the apple store and use a charger there; if it works then your charger is bad. If they also don't work then maybe your battery needs replacing.

HP Officejet Pro 8600 Plus will not copy even after hard reset

HP Officejet Pro 8600 Plus on Windows 8 OS
Will print from computer; will scan documents & save to computer; will NOT copy document on the unit.
Shut down printer; unplugged from wall and back of unit; held on/off button for 60 seconds; plugged back in; started unit.
Placed document on glass; hit copy; hit black; Unit pulls sheet of paper; unit scans document (squeaks while scanning); after period of time, it spits out paper & reads "copy cancelled", but does not clear or return to home screen.
HELP!!
This question was solved.
View Solution.

Hello,
Please check your private message inbox for the reset I'm going to send you.

Why won't my MacBook Pro 13 in 2011 not turn off after upgrading to Lion?

I upgraded to Lion when it came out, but I tried to run a PowerPC only game and the entire system crashed. I was then prompted to reinstall lion, so I did so, but after reinstalling it, it doesn't completely turn off. I click powerdown and it goes to a gray screen where it looks as though it's loading something, but will just stay on this gray screen until the battery dies out. There is no responsed to clicking with the track pad, nor to keys. Any ideas?

Boot to the Lion Restore disk (hold down option key when rebooting) select Disk Utility and then Repair Disk.

IPOD will not turn on, after power ran out and charging for two days.

Slept off while using my IPOD, noticed the next morning that the battery was flat, i charged the IPOD, for one day, try to turn it on nothing happened, charged it for the second day, same thing, it refuses to turn on. Please i will like tips and help on how to go about resolving this problem. Note a friend had same problem and had to charge hers for one days before the IPOD turned on.

If not this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Mid-2009 MacBook Pro sees internal SATA hard drive, but will not boot from or format

I inherited a Mid-2009 MacBook Pro (15-inch, 2.53 GHz model) with a very strange issue.
It first presented itself as not being able to boot from the internal SATA hard drive that came with the computer. Nothing I tried could get it to boot, so I assumed the file system was corrupted beyond repair and booted from a CD to try to format the drive. Disk Utility on the CD would not format the drive, giving me strange error messages like "Unable to write to the last block of the device".
At this point I figured the drive itself must be toast, so I pulled it out and put another known-good SATA hard drive in, booted from CD, and attempted to format. Again, same error messages and an unsuccesful format.
So I had the bright idea of formatting one of the drives in an external enclosure and then putting it in the MBP to see if OS X would even install. No dice. Get a cryptic error message before installation even begins.
So I installed OS X on the drive in the external enclosure and put it in the MBP, and it attempts to boot, but never goes anywhere.
So to sum up, the symptoms I'm seeing:
MacBook Pro CAN see internal SATA hard drives.
MacBook Pro WILL NOT boot from any internal SATA hard drive and cannot format or install OS X to any internal SATA hard drive.
MacBook Pro WILL boot from any CD or external device and seems to work properly otherwise.
At this point I'm thinking it's one of two things: the hard drive ribbon cable or the SATA controller on the logic board.
Since the MacBook Pro seems to work completely fine other than this one issue, and will boot properly from both external devices and the CD (also a SATA device), I'm thinking and hoping that it's just the hard drive ribbon cable. From my searches online, I've heard that this batch of MacBook Pros is known to have issues with the hard drive ribbon cable, but it seems in most cases this manifests itself by the Mac not being able to see a drive at all.
I've done quite a bit of troubleshooting to get to this point, but right now I'm just looking for any feedback at all. Specifically I'd love to know a way I can easily test to see whether it's the logic board or the cable.

UPDATE: An interesting development!
I just tried a third known-good SATA hard drive, one which I believe supports SATA I only (but I'm not sure), and unlike the other drives that the Mac sees but cannot properly interact with, the Mac can't even see this one when I put it inside.
Frustrating as this may be, I believe I'm actually getting closer to a solution since my symptoms now appear to be closely aligned with people having SATA ribbon cable issues.
Onward!

HT4241 What video settings will I need to change on my mid-2009 Macbook Pro?

I am trying to send Audio/Video to my mother's T.V. using a third party combo cable(item # 6331), from monoprice.com. We have a 'Mid-2009 Macbook Pro. I can get the Audio with no problems. I tried all of the different resolutions on the Macbook and the closese Video image I can fet is a vertical sliver in the upper left hand corner of the T.V.(52'' Sony Bravia Model # unknown, mounted on wall) Please help. Mothers Day is coming up an All My Childeren is coming back, but will be on Hulu. Thank You

The tech specs list the upgrades that were available from Apple when that model was being sold new. They don't necessarily reflect the aftermarket-upgradabaility. I don't believe there'd be any reason you couldn't put a hard drive/SSD of whatever capacity you want in that MBP (of course it needs to be the right physical size).
That being said, it's good practice to make sure you have a window to return it just in case.
Yeah what Bob said.
Message was edited by: Andy-J-D

HT1661 My mid-2009 MacBook Pro has just died via a painful (for me) hard drive failure. I backed up a good percentage of files recently but not enough to keep me happy. I need to access the dead drive on the MBP via a 2008 iMac. Best options?

My mid-2009 MacBook Pro has just died via a painful (for me) hard drive failure. I backed up a good percentage of files recently but not enough to keep me happy. I need to access the dead drive on the MBP via a 2008 iMac. Best options?
I have ordered a 800 firewire to 800 firewire cable and am hoping to use the target mode option to copy files from the MBP.
Is this possible?
Hope so!
Any advice and or help would be greatly appreciated.
Many thanks,
Neil

Thanks Ogelthorpe.
Just bought an enclosure to try that also.
Hoping the MBP isn't really dead but just feigning death
Fingers crossed.

I have Mac OS X 10.5.8 on mid-2009 Macbook Pro (683MB RAM used, 81.67GB free space), do I need additional RAM to update to Snow Leopard?

I have Mac OS X 10.5.8 on mid-2009 Macbook Pro (683MB RAM used, 81.67GB free space), do I need additional RAM to update to Snow Leopard?
I was told I can update to Snow Leopard without adding RAM but just read on another discussion thread that someone with the same age Macbook Pro that I have was told to purchase more RAM then update to SL.
Serial # W8*******6D
Model Identifier: MacBookPro 5,5

Thanks!
I ordered 4 GB from crucial.com, product info below. Do you know if it will be 1 or 2 sticks? If only 1, will I be able to use the original 2 GB installed in the machine and the 4 GB from crucial.com?
Part Number: CT4G3S1067M
Module Size: 4GB
Package: 204-pin SODIMM
Feature: DDR3 PC3-8500
Specs: DDR3 PC3-8500 • CL=7 • Unbuffered • NON-ECC • DDR3-1066 • 1.35V • 512Meg x 64 • lead free • halogen free • for Mac

I have a mid 2009 MacBook Pro 5,3 Unibody that won't run anything past Leopard.

I have a mid 2009 MacBook Pro 5,3 Unibody that suffered a minor liquid spill. After waiting for it to dry out, we found that it powers up (but the display doesn't work unless connected to an external monitor) just fine. For several months it worked like a tank running Snow Leopard. I upgraded to Lion with no problems. Once the 10.7.1 update came out, it completely flipped out and wouldn't finish the install. I was forced to take it all the way back to Leopard and now it won't upgrade past Leopard. I replaced the hard drive completely and tried a fresh install of Lion using the thumb drive and that didn't work either. I got the set of errors you will find below. (Sorry, I don't know how to hide them like you can in some forums.) Any ideas or suggestions on why it won't install Lion would be great. I'm not so concerned about the display as wondering why it worked for 4 months and then another month on Lion and then suddenly flipped out on me. I'm not knowledgeable enough to decipher the message below.
Jun 26 10:16:11 christine-cowens-macbook-pro mDNSResponder[22]: ERROR: getOptRdata - unknown opt 4
Jun 26 10:16:14: --- last message repeated 5 times ---
Jun 26 10:16:14 christine-cowens-macbook-pro authexec[158]: executing /Volumes/Mac OS X Install DVD/Install Mac OS X.app/Contents/Resources/InstallAssistantTool_10_5
Jun 26 10:16:17 christine-cowens-macbook-pro mDNSResponder[22]: ERROR: getOptRdata - unknown opt 4
Jun 26 10:16:18: --- last message repeated 1 time ---
Jun 26 10:16:18 christine-cowens-macbook-pro [0x0-0xa00a].com.apple.systemuiserver[98]: Unexpected reply from backup server - ignored
Jun 26 10:16:18 christine-cowens-macbook-pro [0x0-0xb00b].com.apple.finder[99]: Unexpected reply from backup server - ignored
Jun 26 10:16:25 christine-cowens-macbook-pro mDNSResponder[22]: ERROR: getOptRdata - unknown opt 4
Jun 26 10:16:55: --- last message repeated 11 times ---
Jun 26 10:17:53 christine-cowens-macbook-pro mDNSResponder[22]: ERROR: getOptRdata - unknown opt 4
Jun 26 10:18:23: --- last message repeated 9 times ---
Jun 26 10:21:50 christine-cowens-macbook-pro mDNSResponder[22]: ERROR: getOptRdata - unknown opt 4
Jun 26 10:22:20: --- last message repeated 7 times ---
Jun 26 10:22:21 christine-cowens-macbook-pro com.apple.launchd[72] ([0x0-0x14014].com.apple.installassistant[150]): Stray process with PGID equal to this dead job: PID 158 PPID 1 InstallAssistant
Jun 26 10:22:22 christine-cowens-macbook-pro loginwindow[23]: DEAD_PROCESS: 0 console
Jun 26 10:22:22 christine-cowens-macbook-pro shutdown[170]: reboot by christinecowen:
Jun 26 10:22:22 christine-cowens-macbook-pro shutdown[170]: SHUTDOWN_TIME: 1340731342 279916
Jun 26 10:22:22 christine-cowens-macbook-pro mDNSResponder mDNSResponder-176.3 (Nov 3 2008 16:52:57)[22]: stopping
Jun 26 10:22:22 christine-cowens-macbook-pro com.apple.loginwindow[23]: Shutdown NOW!
Jun 26 10:22:22 christine-cowens-macbook-pro com.apple.loginwindow[23]: System shutdown time has arrived^G^G
Jun 26 10:31:05 localhost com.apple.launchctl.System[2]: fsck_hfs: Volume is journaled. No checking performed.
Jun 26 10:31:05 localhost com.apple.launchctl.System[2]: fsck_hfs: Use the -f option to force checking.
Jun 26 10:31:07 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
Jun 26 10:31:07 localhost com.apple.launchd[1] (com.apple.RemoteDesktop.PrivilegeProxy): Unknown key for boolean: EnableTransactions
Jun 26 10:31:07 localhost com.apple.launchd[1] (com.apple.usbmuxd): Unknown key for boolean: EnableTransactions
Jun 26 10:31:07 localhost com.apple.launchd[1] (org.cups.cupsd): Unknown key: SHAuthorizationRight
Jun 26 10:31:07 localhost com.apple.launchd[1] (org.ntp.ntpd): Unknown key: SHAuthorizationRight
Jun 26 10:31:07 localhost com.apple.launchd[1] (org.x.privileged_startx): Unknown key for boolean: EnableTransactions
Jun 26 10:31:07 localhost kernel[0]: npvhash=4095
Jun 26 10:31:07 localhost kextd[10]: 417 cached, 0 uncached personalities to catalog
Jun 26 10:31:07 localhost kernel[0]: hi mem tramps at 0xffe00000
Jun 26 10:31:07 localhost kernel[0]: PAE enabled
Jun 26 10:31:07 localhost kernel[0]: 64 bit mode enabled
Jun 26 10:31:07 localhost kernel[0]: Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_I386
Jun 26 10:31:07 localhost kernel[0]: standard timeslicing quantum is 10000 us
Jun 26 10:31:07 localhost kernel[0]: vm_page_bootstrap: 905993 free pages and 77047 wired pages
Jun 26 10:31:07 localhost kernel[0]: mig_table_max_displ = 79
Jun 26 10:31:07 localhost kernel[0]: 104 prelinked modules
Jun 26 10:31:07 localhost kernel[0]: AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
Jun 26 10:31:07 localhost kernel[0]: AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
Jun 26 10:31:07 localhost kernel[0]: Loading security extension com.apple.security.TMSafetyNet
Jun 26 10:31:07 localhost kernel[0]: calling mpo_policy_init for TMSafetyNet
Jun 26 10:31:07 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
Jun 26 10:31:07 localhost kernel[0]: Loading security extension com.apple.nke.applicationfirewall
Jun 26 10:31:07 localhost kernel[0]: Loading security extension com.apple.security.seatbelt
Jun 26 10:31:07 localhost kernel[0]: calling mpo_policy_init for mb
Jun 26 10:31:07 localhost kernel[0]: Seatbelt MACF policy initialized
Jun 26 10:31:07 localhost kernel[0]: Security policy loaded: Seatbelt Policy (mb)
Jun 26 10:31:07 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Jun 26 10:31:07 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Jun 26 10:31:07 localhost kernel[0]: MAC Framework successfully initialized
Jun 26 10:31:07 localhost kernel[0]: using 16384 buffer headers and 4096 cluster IO buffer headers
Jun 26 10:31:07 localhost kernel[0]: IOAPIC: Version 0x11 Vectors 64:87
Jun 26 10:31:07 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
Jun 26 10:31:07 localhost kernel[0]: mbinit: done
Jun 26 10:31:07 localhost kernel[0]: Security auditing service present
Jun 26 10:31:07 localhost kernel[0]: BSM auditing present
Jun 26 10:31:07 localhost kernel[0]: rooting via boot-uuid from /chosen: CFA77CDA-F33D-3F25-97CF-9E5EE113C739
Jun 26 10:31:07 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Jun 26 10:31:07 localhost kernel[0]: wl0: Broadcom BCM432b 802.11 Wireless Controller
Jun 26 10:31:07 localhost kernel[0]: 5.10.91.21
Jun 26 10:31:07 localhost kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 0025bcfffee5710e; max speed s800.
Jun 26 10:31:07 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@B/AppleMCP79AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/ST9500420AS Media/IOGUIDPartitionScheme/Untitled@3
Jun 26 10:31:07 localhost kernel[0]: BSD root: disk0s3, major 14, minor 3
Jun 26 10:31:07 localhost kernel[0]: jnl: unknown-dev: replay_journal: from: 2878464 to: 2969088 (joffset 0x4b7000)
Jun 26 10:31:07 localhost kernel[0]: jnl: unknown-dev: journal replay done.
Jun 26 10:31:07 localhost kernel[0]: [HCIController][configurePM] power parent ready after 1 tries
Jun 26 10:31:07 localhost kernel[0]: Jettisoning kernel linker.
Jun 26 10:31:07 localhost kernel[0]: Resetting IOCatalogue.
Jun 26 10:31:07 localhost kernel[0]: GFX0: family specific matching fails
Jun 26 10:31:07 localhost kernel[0]: IGPU: family specific matching fails
Jun 26 10:31:07 localhost kernel[0]: Matching service count = 2
Jun 26 10:31:07 localhost kernel[0]: Matching service count = 4
Jun 26 10:31:07: --- last message repeated 4 times ---
Jun 26 10:31:07 localhost kernel[0]: Matching service count = 5
Jun 26 10:31:07 localhost kernel[0]: NVDANV50HAL loaded and registered.
Jun 26 10:31:07 localhost kernel[0]: IGPU: family specific matching fails
Jun 26 10:31:07 localhost kernel[0]: Previous Shutdown Cause: 3
Jun 26 10:31:07 localhost kernel[0]: AppleTyMCEDriver::probe(MacBookPro5,3)
Jun 26 10:31:07 localhost kernel[0]: AppleTyMCEDriver::probe fails
Jun 26 10:31:07 localhost kernel[0]: GFX0: family specific matching fails
Jun 26 10:31:07 localhost kernel[0]: AGC: 2.8.15, HW version=1.8.8, flags:0, features:1
Jun 26 10:31:07 localhost kernel[0]: GFX0: family specific matching fails
Jun 26 10:31:07 localhost kernel[0]: IGPU: family specific matching fails
Jun 26 10:31:07 localhost kernel[0]: GFX0: family specific matching fails
Jun 26 10:31:07 localhost kernel[0]: IGPU: family specific matching fails
Jun 26 10:31:07 localhost kernel[0]: Matching service count = 0
Jun 26 10:31:09 localhost kernel[0]: AppleIntelCPUPowerManagement: initialization complete
Jun 26 10:31:11 localhost bootlog[36]: BOOT_TIME: 1340731864 0
Jun 26 10:31:11 localhost rpc.statd[18]: statd.notify - no notifications needed
Jun 26 10:31:11 localhost DirectoryService[32]: Launched version 5.7 (v514.25)
Jun 26 10:31:11 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[23]: Login Window Application Started -- Threaded auth
Jun 26 10:31:12 localhost fseventsd[27]: bumping event counter to: 0x25d156 (current 0x0) from log file '000000000025c40a'
Jun 26 10:31:13 localhost kernel[0]: NVEthernet: Ethernet address 00:25:bc:e5:71:0e
Jun 26 10:31:13 localhost kernel[0]: AirPort_Brcm43xx: Ethernet address 00:26:08:e3:43:79
Jun 26 10:31:13 localhost blued[45]: Apple Bluetooth daemon started.
Jun 26 10:31:14 localhost mDNSResponder mDNSResponder-176.3 (Nov 3 2008 16:52:57)[22]: starting
Jun 26 10:31:14 localhost com.apple.usbmuxd[15]: usbmuxd-268.5 on Apr 5 2012 at 15:33:48, running 32 bit
Jun 26 10:31:15 localhost kernel[0]: NVEthernet::setLinkStatus - Valid but not Active
Jun 26 10:31:15 localhost kernel[0]: NVEthernet::mediaChanged - Link is down
Jun 26 10:31:15 localhost kernel[0]: NVEthernet::setLinkStatus - Valid but not Active
Jun 26 10:31:15 localhost kernel[0]: AirPort: Link Down on en1
Jun 26 10:31:15 localhost kernel[0]: jnl: disk0s2: replay_journal: from: 9485824 to: 9519104 (joffset 0x9d9000)
Jun 26 10:31:15 localhost /usr/sbin/ocspd[68]: starting
Jun 26 10:31:15 christine-cowens-macbook-pro configd[34]: setting hostname to "christine-cowens-macbook-pro.local"
Jun 26 10:31:16 christine-cowens-macbook-pro kernel[0]: jnl: disk0s2: journal replay done.
Jun 26 10:31:17 christine-cowens-macbook-pro kernel[0]: en1: 802.11d country code set to 'CN'.
Jun 26 10:31:17 christine-cowens-macbook-pro kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 5 6 7 8 9 10 11 12 13 1 2 3 4 5 6 7 8 9 149 153 157 161 165 153 161 149 157
Jun 26 10:31:19 christine-cowens-macbook-pro org.ntp.ntpd[14]: Error : nodename nor servname provided, or not known
Jun 26 10:31:19 christine-cowens-macbook-pro ntpdate[72]: can't find host time.apple.com
Jun 26 10:31:19 christine-cowens-macbook-pro ntpdate[72]: no servers can be used, exiting
Jun 26 10:31:20 christine-cowens-macbook-pro kernel[0]: Auth result for: c8:3a:35:56:9b:80 MAC AUTH succeeded
Jun 26 10:31:20 christine-cowens-macbook-pro kernel[0]: AirPort: Link Up on en1
Jun 26 10:31:21 christine-cowens-macbook-pro kextd[10]: writing kernel link data to /var/run/mach.sym
Jun 26 10:31:25 christine-cowens-macbook-pro loginwindow[23]: Login Window Started Security Agent
Jun 26 10:31:25 christine-cowens-macbook-pro authorizationhost[85]: MechanismInvoke 0x129e00 retainCount 2
Jun 26 10:31:25 christine-cowens-macbook-pro SecurityAgent[86]: MechanismInvoke 0x1015f0 retainCount 1
Jun 26 10:31:25 christine-cowens-macbook-pro loginwindow[23]: Login Window - Returned from Security Agent
Jun 26 10:31:25 christine-cowens-macbook-pro SecurityAgent[86]: MechanismDestroy 0x1015f0 retainCount 1
Jun 26 10:31:25 christine-cowens-macbook-pro authorizationhost[85]: MechanismDestroy 0x129e00 retainCount 2
Jun 26 10:31:25 christine-cowens-macbook-pro loginwindow[23]: USER_PROCESS: 23 console
Jun 26 10:31:25 christine-cowens-macbook-pro com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[82]): Exited: Terminated
Jun 26 10:31:25 christine-cowens-macbook-pro com.apple.launchd[76] (com.apple.AirPortBaseStationAgent): Unknown key for boolean: EnableTransactions
Jun 26 10:31:25 christine-cowens-macbook-pro com.apple.launchd[76] (org.x.startx): Unknown key for boolean: EnableTransactions
Jun 26 10:31:26 christine-cowens-macbook-pro /System/Library/CoreServices/coreservicesd[43]: SFLSharePointsEntry::CreateDSRecord: dsCreateRecordAndOpen(Christine Cowen's Public Folder) returned -14135

Might have a hardware issue that was caused by the minor liquid spill.
Take it to Apple to have them look at it. I think they do a free diagnostics. That way you can find out what's wrong with your MB.
Good luck....Hope you get it sorted out.

I am having problems rebooting my mid 2009 macbook pro (grey screen other issues), need help!

I am having problems rebooting, I have experienced the same problem as others with the grey screen but my case is a little different, It started with my mid 2009 macbook pro acting a little slower than normal, the screen would freeze, mouse wouldnt move and i'd be forced to "force reboot" this went on for a couple of days until i was tinkering with the wifi connection and it froze again. I had to reboot and this time i noticed that it took a long time to get to the login screen. i put in my password and it went into infinite load (i also tried the guest account and other accounts with same result). i tried rebooting again and the same thing would happen. after several reboots, the screen just stayed grey, sometimes with the apple logo and gear sometimes without it. Since its a 2009, (and for the most part, still works like a champ) i decided test the ram, i took one stick of ram out at a time to see if i could notice anything wrong with them. when i stuck just one in, the mac was still having the same problem rebooting. i pulled that ram and and stuck in the other and i noticed that this time the apple logo never appeard and a big crossed out circle appeared. figuring that the ram must be the problem, i ordered new ram and installed it. i noticed that when i rebooted for the first time with the new ram it was rather quick and took me straight to the login screen and i was able to log in with no problem. at this point i thought the problem was solved, but i noticed the macbook still acting funny. at first, none of my files appeared on my desktop or in the finder window. after about 20 minutes, everything magically popped up. i also noticed long pauses/freezes with the colored pin wheel spinnig. i closed the laptop and opened it again and the screen just stayed black. i tried rebooting again, and again i got the grey screen with no signs of being able to log in... i waited about 20 minutes and tried to reboot again and again i was able to log in, however the macbook is still acting slow and will freeze with no signs of unfreezing without a reboot.
my macbook is 5 years old and has plenty of miles on it, so i understand if the thing needs to be replaced alltogether but does anyone know what could be the issue? could the bad ram have corrupted the hard drive in anyway? would re-installing the OS fix it?? and if so, how would i do that if i downloaded mavericks from the app store? are there any other solutions to this problem?
all my files and what not are backed up on an external HD so theres nothing on it that i'd miss desperately if i had to whipe the hard drive but id really like to get her working again without any whiping of the HD. if anyone can help me out, it'd be greatly appreciated

It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.
How large is your hard drive and how much hard drive space do you have left?

My Mid 2009 Macbook pro (Just purchased) will not turn on after hard drive change and ram upgrade

Similar Messages

Maybe you are looking for