My mid 2010 Macbook pro running OSX 10.8.4 sd card reader will not work

I have a Macbook Pro 13" mid 2010 model running OSX 10.8.4.  I don't use the card reader very often so I can't tell you the last time it worked, but I have used it a few times without issue.  (probably not for at least a year though)
I searched the forums and it seems this was an older problem with lots of suggested fixes.  I tried blowing air through the slot and I also went looking for XQuartz but cannot find it under my utilities.  (I assume it must be in the X11 category that is no longer supported under 10.8.4?)
I have tried putting it in all the way and pulling it out slightly as one person suggested and that also did not work.
Any ideas?  For the first time in a long time I need the card slot and it doesn't feel like cooperating.  LOL
edited to add that I am trying to access a Sony SDHC 32GB card model SF-32NX
Thanks in advance,
Wayne

If you haven't already done so, eject the card by dragging its icon to the Eject icon in the Dock (where the Trash icon usually is.) Make sure the write-lock switch on the card is in the unlocked position. Then reinsert the card and test.
If there's no change, and the same happens with more than one card, the card reader is stuck in write-locked mode. I don't generally advise do-it-yourself hardware repair, but one ASC member managed to fix this problem. I haven't tried the fix myself and I can't offer any guidance beyond what's in that discussion. If you cause damage, don't expect your warranty to cover it. I suggest you instead make a "Genius" appointment at an Apple Store.

Similar Messages

  • I have a mid 2010 Macbook Pro running Snow Leopard and foolishly upgraded to Yosemite.  Is it possible to go back in time with Time Machine and reinstall Snow Leopard.  Then upgrade to Lion or Mavericks?  Any other ideas on how I can exit Yosemite?

    I have a mid 2010 Macbook Pro running Snow Leopard and foolishly upgraded to Yosemite. Now have numerous problems.  Is it possible to go back in time with Time Machine and reinstall Snow Leopard?  Then upgrade to Lion or Mavericks?  Any other ideas on how I can exit Yosemite?

    Once you get yourself back to Snow Leopard, if you still want to upgrade somewhat, I would suggest the following:
    1. Get an external hard drive that you can use for experiments with new OS versions. You could partition it into 2 or 3 partitions. You could then clone your existing Snow Leopard system to one partition using Carbon Copy Cloner (well worth $40) or SuperDuper ($25).
    2. Buy OS X Mountain Lion for $20, through the Apple online store (I don't think it's available through the App Store). Apple has decided to make it very difficult for anyone to get Mavericks unless they have already downloaded it.
    You will receive two e-mails from Apple, one containing a PDF with a redemption code, and one with the password you will need to unlock the PDF. Using the code, you will download Mountain Lion from the App Store, where it will appear among your Purchased items.
    After ML finishes downloading, its installer app will launch itself. When you see this launch screen, QUIT the install app immediately! Go to your applications folder, find the Install OS X Mountain Lion app, and copy it to a safe location outside of your Applications folder. Keeping one or more copies will allow you to reinstall without unnecessary aggravation if you later need or want to do that. At this point, you can re-launch the Installer in the Applications folder and let it run. You can install it on a clean partition on your external HD, or you can allow it to upgrade the Snow Leopard clone you created on your external drive, or you can do both. This should allow you to test how everything works for as long as you like.
    3. If you left yourself a free partition on your test drive, try a clean install of Yosemite and set everything up from scratch (do not migrate anything). This will allow you to see whether your problems with it were related to something in your Snow Leopard system.

  • I have a 2010 macbook pro running OSX 10.6.8 and I would like to interface my macbook to a HD tv. I purchased a interface cable but cannot seem to communicate with the TV. Do you have any instructions or tips that I can use to accomplish this task? Do I

    I have a 2010 macbook pro running osx 10.6.8 and would like to interface my mac to my HD tv. Are any instructions available to reliably make this connection and if so what is needed on my part. Is the software compatible or do I have to upgrade to a later version OS. Thank You,
    Gene

    I purchased a mini to HDMI cable and tried to connect to the TV but the TV is not recognizing the computer. I attempted to set sound and display settings under the "my Preferences" utility with no success.  Again, I'm not sure if I need to upgrade my OS software Any Suggestions?

  • HT1270 My mid 2010 MacBook Pro has the maximum 8 GB memory cards installed. Can it be upgraded to 16 GB? Are there compatible 8 GB cards available?

    My mid 2010 MacBook Pro has the maximum 8 GB memory cards installed. Can it be upgraded to 16 GB? Are there compatible 8 GB cards available?

    I have a similar question..  13" macbook pro, mid 2010- having problems with spinning beach ball..  like someone from Mars has taken over the computer..   - the specs are below..   would it help if I added more RAM?   If  yes, any suggestions where/ what to buy?  This only started after upgrade to Mountain Lion from SNL. 
    MacBook Pro 13 inch mid 2010
      Model Identifier:    MacBookPro7,1
      Processor Name:    Intel Core 2 Duo
      Processor Speed:    2.66 GHz
      Number of Processors:    1
      Total Number of Cores:    2
      L2 Cache:    3 MB
    Memory  4 GB 1067 MHz DDR3
      Bus Speed:    1.07 GHz
      Boot ROM Version:    MBP71.0039.B0E
      SMC Version (system):    1.62f7
    Graphics  NVIDIA GeForce 320M 256 MB
    BANK 0/DIMM0:
      Size:    2 GB
      Type:    DDR3
      Speed:    1067 MHz
      Status:    OK
      Manufacturer:    0x80AD
      Part Number:    0x484D54313235533654465238432D47372020
      Serial Number:    0x27A0B2F9
    BANK 1/DIMM0:
      Size:    2 GB
      Type:    DDR3
      Speed:    1067 MHz
      Status:    OK
      Manufacturer:    0x80AD
      Part Number:    0x484D54313235533654465238432D47372020
      Serial Number:    0x2740B300

  • Mid-2010 Macbook Pro running very hot

    Hi all,
    My mid-2010 Macbook pro is running very hot. On average CPU is 61-70 degrees Celsius, sometimes even more. I'm pretty bad at having lots of chrome tabs open and heavy multitasking, but even when I'm not temperature still ends up very high and fan rpm can get to over 6000. Heat seems to be concentrated to the lefthand side of the touchpad (battery area?). I'm running 10.9.3.
    Current stats below from iStat pro widget (smcFanControl concurs with these temps), with only the following pic's activity running. Laptop currently balanced on two books (so airflow around the sides) which are in turn on my lap.
    I have tried reseting the SMC with the shift-control-option-power method but it doesn't seem to have worked - instructions said to press and hold this, then release, then press power again to boot, but laptop boots up from this combination anyway.
    Am I just doing something wrong or will this be an expensive trip to the apple store to fix?

    Hey happyhaskins,
    If you are having an issue with your MacBook Pro running excessively hot, I would suggest that you troubleshoot using the steps in this article - 
    Mac notebooks: Operating temperature - Apple Support
    Thanks for using Apple Support Communities.
    Happy computing,
    Brett L 

  • Problem with installing Lightroom 2 onto Macbook Pro running OS10.6.8 - any ideas why it will not install??

    To be able to work on my older laptop on location I wanted to install Lightroom 2 onto a MacBook Pro which runs 10.6.8
    It stops at the end of the installment and tells me to contact Adobe for info.... that's nit very easy anyway.
    Has someone a quick clue on where the issue might be?? Thank's a lot already for your help and effort - Tom

    Cannot connect after upgrading Firefox
    * https://support.mozilla.com/en-US/kb/Cannot%20connect%20after%20upgrading%20Firefox
    Firefox cannot load websites but other programs can
    * https://support.mozilla.com/en-US/kb/Firefox%20cannot%20load%20websites%20but%20other%20programs%20can
    Check and tell if its working.

  • Mid 2010 Macbook Pro HDMI

    Since updating my Mid 2010 Macbook Pro to OSX 10.9.1, connecting it to my TV has been hit and miss via an HDMI cable. When plugging the cable in, the Macbook screen flashes black as it would be ready to mirror the image but it does not send a signal to my TV nor show the mirroring icon at the top of the screen. The issue has been hit and miss and now will not work no matter how I try to connect the cable. Any suggestions? Is this a known issue with Mavericks?

    Check that your model supports audio over mini-displayport, not all of them do:
    http://support.apple.com/kb/HT4241
    If you're sure it does, then check you have the correct output selected.  Hold down the option key while you click the speaker icon in the menu bar.  You can select the output device there.
    If still not working, click the Apple icon on the left of the menu bar and select 'Software Update' and make sure your system is up to date.
    If still not working try resetting the PRAM first, and if still not working reset the SMC:
    http://support.apple.com/kb/ht1379
    http://support.apple.com/kb/HT3964

  • Mid-2010 Macbook Pro White Screen of Death?

    Hi all,
    I have a Mid- 2010 Macbook Pro, running 10.8.2 that, when booting, sounds the Startup Chime but no Apple logo appears, just a white screen.  I'm in IT so I've done several things, but nothing has worked and I couldn't find a previous discussion that was similar to mine.
    Here's what I've done so far:
    - Changed hard drives
    - reseated RAM
    - Unplugged Battery
    - Reset the PRAM
    - Tried to boot from CD using CTRL- C
    - Tried Recovery boot using CTRL- R
    Anything else I could try?  I keep thinking it may have something to do with the Time Change, but that seems a little weird to me if that's the cause.  It worked fine late last night and then it did this in the morning (after the time change).
    Thanks for any help you can give!

    Hi sanjampet,
    Tried the SMC reset, safe boot, CD boot, and Recovery boot all with no luck.  Not sure why it's going on, but it's looking more and more like a hardware issue to me.  It's a white screen (instead of a grey screen), so I'm worried that it's something with it.  I'm going to try and see if I can remote into it using Screen Sharing to see if it's something with the display.
    My wife used it last and she told me that it was slow on the internet with the mouse freezing up, so she held down the power to turn it off then it came up with the white screen which hasn't come back on since.  I'm using an 3rd party SSD hard drive and replaced it with another SATA hard drive, but it didn't help.
    Thanks,
    JN

  • Mid-2010 macbook pro mini display port to hdmi works only intermittently

    I have a 13-inch mid-2010 MacBook Pro running OS X 10.10.2.  HDMI out from mini displayport to my Dynex TV only intermittently works.  The times that I have gotten it to work involves a combination of restarting the computer, unplugging the TV and plugging it back in, then plugging in the MDP adapter.  Now when I plug it in, the MacBook screen flashes black like it is trying to detect the external display, but no picture on the TV.  Any help would be appreciated.

    Here is the console log output when I plug in the adapter:
    1/31/15 10:36:47.582 PM WindowServer[443]: Received display connect changed for display 0x3f003d
    1/31/15 10:36:47.582 PM WindowServer[443]: Found 1 modes for display 0x003f003d [1, 0]
    1/31/15 10:36:47.594 PM WindowServer[443]: Display 0x042732c0: GL mask 0x1; bounds (0, 0)[1280 x 800], 18 modes available
    Main, Active, on-line, enabled, built-in, boot, OpenGL-accel, Vendor 610, Model 9ccb, S/N 0, Unit 0, Rotation 0
    UUID 0x4f159f59a71d63aefce94e26fc6d6edd, ColorSpace { 2068752606 }
    1/31/15 10:36:47.594 PM WindowServer[443]: GLCompositor: GL renderer id 0x0102261a, GL mask 0x00000003, accelerator 0x0000429b, unit 0, caps QEX|MIPMAP, vram 256 MB
    texture max 8192, viewport max {8192, 8192}, extensions NPOT|GLSL|FLOAT
    1/31/15 10:36:47.594 PM WindowServer[443]: Display 0x003f003f: GL mask 0x4; bounds (2304, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
    UUID 0xffffffffffffffffffffffffffffffff
    1/31/15 10:36:47.594 PM WindowServer[443]: Display 0x003f003e: GL mask 0x4; bounds (2305, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
    UUID 0xffffffffffffffffffffffffffffffff
    1/31/15 10:36:47.594 PM WindowServer[443]: Display 0x003f003d: GL mask 0x2; bounds (2306, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
    UUID 0xffffffffffffffffffffffffffffffff
    1/31/15 10:36:47.605 PM WindowServer[443]: Display 0x042732c0: Unit 0: Startup Mode 1280 x 800, CGSThirtytwoBitColor, Resolution 1, ioModeID 0x80002000, ioModeDepth 0x2, IOReturn 0x0
    1/31/15 10:36:47.605 PM WindowServer[443]: CGXDisplaysDidReconfigure: Display added
    1/31/15 10:36:47.605 PM WindowServer[443]: CGXDisplaysDidReconfigure: Display removed
    1/31/15 10:36:47.608 PM WindowServer[443]: Display 0x042732c0: GL mask 0x1; bounds (0, 0)[1280 x 800], 18 modes available
    Main, Active, on-line, enabled, built-in, boot, OpenGL-accel, Vendor 610, Model 9ccb, S/N 0, Unit 0, Rotation 0
    UUID 0x4f159f59a71d63aefce94e26fc6d6edd, ColorSpace { 2068752606 }
    1/31/15 10:36:47.608 PM WindowServer[443]: GLCompositor: GL renderer id 0x0102261a, GL mask 0x00000003, accelerator 0x0000429b, unit 0, caps QEX|MIPMAP, vram 256 MB
    texture max 8192, viewport max {8192, 8192}, extensions NPOT|GLSL|FLOAT
    1/31/15 10:36:47.608 PM WindowServer[443]: Display 0x003f003f: GL mask 0x4; bounds (2304, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
    UUID 0xffffffffffffffffffffffffffffffff
    1/31/15 10:36:47.609 PM WindowServer[443]: Display 0x003f003e: GL mask 0x4; bounds (2305, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
    UUID 0xffffffffffffffffffffffffffffffff
    1/31/15 10:36:47.609 PM WindowServer[443]: Display 0x003f003d: GL mask 0x2; bounds (2306, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
    UUID 0xffffffffffffffffffffffffffffffff
    1/31/15 10:36:49.582 PM WindowServer[443]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'. Run with arg = -discovery
    1/31/15 10:36:49.605 PM WindowServer[443]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'. Run with arg = -discovery
    1/31/15 10:36:49.712 PM WindowServer[443]: CGXSetDisplayColorProfileAndTransfer: Display 0x042732c0: Unit 0; ColorProfile { 2068752606 }; TransferTable (256, 12)
    1/31/15 10:36:49.767 PM WindowServer[443]: CGXSetDisplayColorProfileAndTransfer: Display 0x042732c0: Unit 0; ColorProfile { 2068752606 }; TransferTable (256, 12)
    1/31/15 10:36:49.771 PM com.apple.AmbientDisplayAgent[313]: AMBD Agent: xpc connection became invalid during event handler
    1/31/15 10:36:49.822 PM com.apple.AmbientDisplayAgent[313]: AMBD Agent: xpc connection became invalid during event handler
    1/31/15 10:36:49.865 PM DMProxy[647]: AMBD Services: connection interrupted: com.apple.AmbientDisplayAgent (Connection interrupted)
    1/31/15 10:36:49.875 PM WindowServer[443]: CGXSetDisplayColorProfileAndTransfer: Display 0x042732c0: Unit 0; ColorProfile { 2068752606 }; TransferTable (256, 12)
    1/31/15 10:36:49.923 PM com.apple.AmbientDisplayAgent[313]: AmbientDisplayAgent started
    1/31/15 10:36:49.929 PM com.apple.AmbientDisplayAgent[313]: AMBD initializing devices
    1/31/15 10:36:49.940 PM com.apple.AmbientDisplayAgent[313]: AMBD Agent: xpc connection became invalid during event handler
    1/31/15 10:36:49.942 PM DMProxy[648]: AMBD Services: connection interrupted: com.apple.AmbientDisplayAgent (Connection interrupted)
    1/31/15 10:36:50.017 PM com.apple.AmbientDisplayAgent[313]: AmbientDisplayAgent started
    1/31/15 10:36:54.946 PM DMProxy[648]: AMBD Services serviceSendMessageWithReplyAndTimeout:131: Semaphore timeout when waiting for reply to message ID 2
    1/31/15 10:36:54.946 PM DMProxy[648]: AMBD Services serviceSendMessageWithReplyAndTimeout:131: Semaphore timeout when waiting for reply to message ID 1
    1/31/15 10:36:54.948 PM com.apple.AmbientDisplayAgent[313]: AMBD initializing devices
    1/31/15 10:36:54.960 PM WindowServer[443]: CGXSetDisplayColorProfileAndTransfer: Display 0x042732c0: Unit 0; ColorProfile { 2068752606 }; TransferTable (256, 12)
    1/31/15 10:36:54.971 PM com.apple.AmbientDisplayAgent[313]: AMBD Agent: xpc connection became invalid during event handler
    1/31/15 10:36:54.972 PM com.apple.AmbientDisplayAgent[313]: AMBD Agent: xpc connection became invalid during event handler

  • Stage3D and a Mid-2010 MacBook Pro

    So, I have a Mid-2010 MacBook Pro running Lion. It has a GeForce GT 330M. According to everything I can find online, my computer should support Stage3D. However, when I try and use an application that calls for it, I get errors about an unsupported graphics card. When I go to the Stage3D unsupported chipset page, it says that my GPU does not support Stage3D in Baseline or Constrained profile.
    I found a guy who did some testing of Stage3D vs. WebGL, and he used the same chipset I am using to run the tests.
    Is it a driver issue that was fixed in Snow Leopard/Mavericks? Or is my chipset actually unsupported? I would think that a three-year-old graphics card should still work. I appreciate any help that anyone can give.
    Complete system specs:
    MacBook Pro, Mid 2010
    2.4 GHz i5
    8 GB RAM
    NVIDIA GeForce GT 330M 256MB
    Mac OS X 10.7.5
    Flash Version: 11.9.900.152

    I'd personally trust the assessor window more than the list. It uses javascript to render Stage 3D animation via your GPU, so if it doesn't support it, it won't show the 3D animation.
    Since 2004 Apple has been notorious for releasing "mid year" and "late year" models that have minor changes, but are still called the same year model. Sometimes, those changes are for the better, sometimes not.
    I had a 2004 G5 iMac that was a 1.8gHz 20". It was made in June. The models made in December 2004 had iSight cams built in and a different GPU, but they were still called 2004 iMacs. Better systems for nearly $600 less. I had a late 2009 MacBook Pro that had a better GPU (512mb VRAM) than my neighbor's early 2009 MBP (256mb VRAM). I'd suspect that the people with 2010 Minis who CAN run Stage 3D have later models, with a different GPU, or some other "minor change" made by Apple that allows it.
    Regardless of what it is, unfortunately Flash Player and Stage 3D can't upgrade hardware.

  • Why can't I use my mid 2010 macbook pro with 8GB memoir and NVIDIA GEForce GT 330M 256MB to run 3D in photoshop CC?

    Why can't I use my mid 2010 macbook pro with 8GB memoir and NVIDIA GEForce GT 330M 256MB to run 3D in photoshop CC?

    3-D is very memory intensive.
    System requirements | Photoshop
    Mac OS
    Multicore Intel processor with 64-bit support
    Mac OS X v10.7, v10.8, or v10.9
    2 GB of RAM (8 GB recommended)
    3.2 GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
    1024x768 display (1280x800 recommended) with 16-bit color and 512 MB of VRAM (1 GB recommended)**
    OpenGL 2.0–capable system
    Internet connection and registration are necessary for required software activation, membership validation, and access to online services.*
    ** 3D features are disabled and some Mercury Graphics Engine enhanced features may not work with less than 512 MB VRAM. Read the Help article.
    Bottom line, you don't have enough VRAM
    Nancy O.

  • I have a mid 2010 Macbook Pro, How can I install Windows 7 without an Optical Drive?

    For clarity:  I have a mid 2010, Macbook Pro.  I recently decided to upgrade to a Crucial SSD drive, double the ram (8 gigs), and remove the optical drive in favor of using my old drive as a back up.  I am also currently running Yosemite.
    I want to install Windows 7 onto my SSD, using bootcamp.  Unfortunately I no longer have an optical drive installed, which makes things difficult as Bootcamp does not even give me the option to create a bootable USB.
    Now, this is where things get kinda fuzzy:
    MId 2010 macbooks use EFI, and are quite capable of booting from USB.  How do I know?  Because I booted from a USB drive in order to do a fresh install of Yosemite on my SSD.
    I have read mutliple forums and threads with claims that folks have had no problems doing this on 2008 Macbook Pros running Snow Leopard.  However, what seemed to be required was some clever .plist modding.  I have used both text wrangler, and x-code to do this, unfortunately upon booting of bootcamp, bootcamp instantly crashes.  Naturally, I can restore bootcamp because I made backups of the .plist file.
    It would seem that modffying the .plist file assumes that the option to create a bootable USB device is grayed out.  In my case, it is non existent.
    I have also read that folks have had success using rEFIt, however rEFIt has been forked to rEFIned, and the developer of rEFIned made mention on his site that Yosemite handles booting differently than previous versions of OSX.
    WIth that, I was hoping that some kind person could explain to me whats going on, what I am missing, and what I can do to make this happen just shy of tearing down my MBP and reisntalling the Optical Drive and dusting off my Win 7 disc.
    Also, my Model Number/Bootrom is MBP 6,2.
    Thanks in advance!

    Thank you for your reply, and the information.  This is what I came up with:
    I added the strings as instructed, however when I went to sign the script in terminal, I was told:
    /Applications/Utilities/Boot Camp Assistant.app: replacing existing signature
    /Applications/Utilities/Boot Camp Assistant.app: code object is not signed at all
    In subcomponent: /Applications/Utilities/Boot Camp Assistant.app/Contents/info.plist
    Also, here are screen captures of the lines that I added.  Mine are the top string entries:
    Thank you for your help, thus far!

  • Mid 2010 MacBook Pro 15" battery Problem

    Hi
    I have a Mid 2010 MacBook Pro 15" 2,66GHz Intel Core i7, with 8GB of 1067MHz DDR3 Ram running OSX 10.9.4.
    When my MacBook reaches about 30% charge, it shuts down.
    I have had the battery replaced about 3 days ago, and thats when I started noticing it shutting down at 30% charge.
    Is there anything i can do to fix this?

        Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".

  • Mid-2010 Macbook Pro Kernel Panic

    Hi, I have a Mid-2010 MacBook pro (2.66 GHz Core i7) running OSX 10.6.8  that has been frequently crashing/kernel panic recently. This happens mostly when I am playing games, such as league of legends, but has also happened during times of low usage (ie simple web browsing or typing a document).
    This is the error message that I recieve:
    Interval Since Last Panic Report:  -3972835 sec
    Panics Since Last Report:          37
    Anonymous UUID: 00F0EF91-25D0-4546-BC00-D807466EF16D
    Sat Jun 22 16:03:56 2013
    panic(cpu 2 caller 0x9d4c9b): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xc0000000 0x7f461000 0x0a5480a2, D0, P3/4
    Backtrace (CPU 2), Frame : Return Address (4 potential args on stack)
    0x551da2e8 : 0x21b837 (0x5dd7fc 0x551da31c 0x223ce1 0x0)
    0x551da338 : 0x9d4c9b (0xbea28c 0xc5a800 0xbf8e60 0x0)
    0x551da3d8 : 0xaef608 (0x94a5804 0x9fb6004 0x100 0x0)
    0x551da428 : 0xae6601 (0x9fb6004 0x100 0x551da458 0x9c4778)
    0x551da458 : 0x16c89a6 (0x9fb6004 0x100 0x438004ee 0x0)
    0x551da598 : 0xb0e2b5 (0x9fb6004 0x83e0004 0x0 0x0)
    0x551da5d8 : 0x9dde7c (0x9fb6004 0x83e0004 0x0 0x0)
    0x551da678 : 0x9da55b (0x0 0x9 0x0 0x0)
    0x551da828 : 0x9dbaf9 (0x0 0x600d600d 0x704a 0x551da858)
    0x551da8f8 : 0xca8f12 (0x551da9c8 0x14b01034 0x2f000 0x0)
    0x551daa78 : 0xcb1a0b (0x46335000 0x14b01034 0x14affe00 0x0)
    0x551daab8 : 0xcb2203 (0x89d3a00 0x14b04800 0x400 0x0)
    0x551dab48 : 0xc808a7 (0x89d3a00 0x14b04800 0x14a9c674 0x27e32000)
    0x551dab98 : 0x56d196 (0xa3c8400 0x14a9c674 0x551daddc 0x58)
    0x551dabd8 : 0x56e2d8 (0xcf8d18 0xa3c8400 0x14a9c674 0x58)
    0x551dac28 : 0x56eb59 (0xa3c8400 0x5 0x551dac70 0x0)
    0x551dad48 : 0x286638 (0xa3c8400 0x5 0x14a9c670 0x0)
    0x551dbdf8 : 0x21dbe5 (0x14a9c648 0x14a245a0 0x1fa960 0x4d03)
    0x551dbe38 : 0x210a86 (0x14a9c600 0x0 0xae6b9a0 0xbb30ab0)
    0x551dbe98 : 0x216f84 (0x14a9c600 0x0 0x0 0x0)
    0x551dbf18 : 0x295914 (0x551dbf44 0x0 0x0 0x0)
    0x551dbfc8 : 0x2a20f8 (0x974d0e0 0x0 0x10 0x974d0e0)
          Kernel Extensions in backtrace (with dependencies):
    com.apple.GeForce(6.4.0)@0xc5c000->0xd12fff
    dependency: com.apple.NVDAResman(6.4.0)@0x96e000
    dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x961000
    dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x928000
                dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x93f000
    com.apple.nvidia.nv50hal(6.4.0)@0x1592000->0x19a6fff
    dependency: com.apple.NVDAResman(6.4.0)@0x96e000
    com.apple.NVDAResman(6.4.0)@0x96e000->0xc5bfff
                dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x928000
    dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x961000
    dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x93f000
    BSD process name corresponding to current thread: LeagueofLegends
    Mac OS version:
    10K549
    Kernel version:
    Darwin Kernel Version 10.8.0: Tue Jun  7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
    System model name: MacBookPro6,2 (Mac-F22586C8)
    System uptime in nanoseconds: 186143162020
    unloaded kexts:
    com.apple.driver.AppleUSBUHCI     4.2.0 (addr 0x142d000, size 0x65536) - last unloaded 153484623357
    loaded kexts:
    com.parallels.kext.prl_vnic    7.0 14920.689535
    com.parallels.kext.prl_netbridge      7.0 14920.689535
    com.parallels.kext.prl_hid_hook       7.0 14920.689535
    com.parallels.kext.prl_hypervisor    7.0 14920.689535
    com.parallels.kext.prl_usb_connect  7.0 14920.689535
    jp.plentycom.driver.SteerMouse      4.1.6
    com.apple.driver.AppleHWSensor   1.9.3d0 - last loaded 33973259268
    com.apple.driver.AGPM        100.12.31
    com.apple.driver.AudioAUUC           1.57
    com.apple.filesystems.autofs            2.1.0
    com.apple.driver.AppleMikeyHIDDriver     1.2.0
    com.apple.driver.AppleHDA 2.0.5f14
    com.apple.driver.AppleMikeyDriver           2.0.5f14
    com.apple.driver.AppleUpstreamUserClient          3.5.7
    com.apple.driver.AppleMCCSControl          1.0.20
    com.apple.Dont_Steal_Mac_OS_X      7.0.0
    com.apple.driver.AudioIPCDriver    1.1.6
    com.apple.driver.SMCMotionSensor           3.0.1d2
    com.apple.driver.AppleIntelHDGraphics    6.4.0
    com.apple.driver.AppleIntelHDGraphicsFB            6.4.0
    com.apple.driver.ACPI_SMC_PlatformPlugin          4.7.0a1
    com.apple.driver.AppleLPC  1.5.1
    com.apple.driver.AppleGraphicsControl     2.10.6
    com.apple.kext.AppleSMCLMU        1.5.2d10
    com.apple.GeForce    6.4.0
    com.apple.driver.AppleUSBTCButtons        201.6
    com.apple.driver.AppleUSBCardReader     2.6.1
    com.apple.driver.AppleUSBTCKeyboard    201.6
    com.apple.driver.AppleIRController            303.8
    com.apple.BootCache            31.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib  1.0.0d1
    com.apple.iokit.SCSITaskUserClient            2.6.8
    com.apple.iokit.IOAHCIBlockStorage           1.6.4
    com.apple.driver.AppleFWOHCI      4.7.3
    com.apple.driver.AirPortBrcm43224          428.42.4
    com.apple.iokit.AppleBCM5701Ethernet   3.0.5b8
    com.apple.driver.AppleEFINVRAM  1.4.0
    com.apple.driver.AppleSmartBatteryManager      160.0.0
    com.apple.driver.AppleAHCIPort     2.1.7
    com.apple.driver.AppleUSBHub      4.2.4
    com.apple.driver.AppleUSBEHCI     4.2.4
    com.apple.driver.AppleACPIButtons           1.3.6
    com.apple.driver.AppleRTC  1.3.1
    com.apple.driver.AppleHPET           1.5
    com.apple.driver.AppleSMBIOS       1.7
    com.apple.driver.AppleACPIEC        1.3.6
    com.apple.driver.AppleAPIC            1.4
    com.apple.driver.AppleIntelCPUPowerManagementClient          142.6.0
    com.apple.security.sandbox 1
    com.apple.security.quarantine        0
    com.apple.nke.applicationfirewall   2.1.14
    com.apple.driver.AppleIntelCPUPowerManagement        142.6.0
    com.apple.driver.AppleProfileReadCounterAction            17
    com.apple.driver.AppleProfileTimestampAction   10
    com.apple.driver.AppleProfileThreadInfoAction   14
    com.apple.driver.AppleProfileRegisterStateAction            10
    com.apple.driver.AppleProfileKEventAction          10
    com.apple.driver.AppleProfileCallstackAction        20
    com.apple.driver.DspFuncLib          2.0.5f14
    com.apple.iokit.IOSurface     74.2
    com.apple.iokit.IOBluetoothSerialManager            2.4.5f3
    com.apple.iokit.IOSerialFamily         10.0.3
    com.apple.iokit.IOAudioFamily         1.8.3fc2
    com.apple.kext.OSvKernDSPLib      1.3
    com.apple.driver.AppleSMBusController    1.0.10d0
    com.apple.iokit.IOFireWireIP           2.0.3
    com.apple.driver.AppleHDAController        2.0.5f14
    com.apple.iokit.IOHDAFamily           2.0.5f14
    com.apple.iokit.AppleProfileFamily 41
    com.apple.driver.IOPlatformPluginFamily 4.7.0a1
    com.apple.driver.AppleSMBusPCI   1.0.10d0
    com.apple.driver.AppleBacklightExpert     1.0.1
    com.apple.driver.AppleSMC 3.1.0d5
    com.apple.nvidia.nv50hal    6.4.0
    com.apple.NVDAResman      6.4.0
    com.apple.iokit.IONDRVSupport      2.2.1
    com.apple.iokit.IOGraphicsFamily    2.2.1
    com.apple.driver.BroadcomUSBBluetoothHCIController  2.4.5f3
    com.apple.driver.AppleUSBBluetoothHCIController         2.4.5f3
    com.apple.driver.IOBluetoothHIDDriver    2.4.5f3
    com.apple.iokit.IOBluetoothFamily  2.4.5f3
    com.apple.iokit.IOSCSIBlockCommandsDevice       2.6.8
    com.apple.iokit.IOUSBMassStorageClass     2.6.7
    com.apple.driver.AppleUSBMultitouch       207.7
    com.apple.iokit.IOUSBHIDDriver     4.2.0
    com.apple.driver.AppleUSBMergeNub       4.2.4
    com.apple.driver.AppleUSBComposite        3.9.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice        2.6.8
    com.apple.iokit.IOBDStorageFamily 1.6
    com.apple.iokit.IODVDStorageFamily          1.6
    com.apple.iokit.IOCDStorageFamily 1.6.1
    com.apple.driver.XsanFilter 402.1
    com.apple.iokit.IOAHCISerialATAPI 1.2.6
    com.apple.iokit.IOSCSIArchitectureModelFamily   2.6.8
    com.apple.iokit.IOFireWireFamily    4.2.6
    com.apple.iokit.IO80211Family       320.1
    com.apple.iokit.IONetworkingFamily           1.10
    com.apple.iokit.IOAHCIFamily          2.0.6
    com.apple.iokit.IOUSBUserClient     4.2.4
    com.apple.iokit.IOUSBFamily            4.2.4
    com.apple.driver.AppleEFIRuntime            1.4.0
    com.apple.iokit.IOHIDFamily            1.6.6
    com.apple.iokit.IOSMBusFamily       1.1
    com.apple.kext.AppleMatch 1.0.0d1
    com.apple.security.TMSafetyNet     6
    com.apple.driver.DiskImages           289.1
    com.apple.iokit.IOStorageFamily      1.6.3
    com.apple.driver.AppleACPIPlatform         1.3.6
    com.apple.iokit.IOPCIFamily 2.6.5
    com.apple.iokit.IOACPIFamily          1.3.0
    Help please!

    jasonSan wrote:
    I took my computer into the Apple store, and they ran extended diagnostics on it, finding nothing. However, they told me that the problems sounded like a logic board failure, and sent it to get it repaired. They quoted me the flat-rate $310 repair fee, because I had purchased my MacBook 3 years and 2 weeks ago. Is there nothing else I can do, or should I still fight to get it repaired free of charge?
    Apple says that you can only get the logic board replaced for free if your computer was purchased less than 3 years ago, so you have to pay for the logic board. However, you can consider lucky: logic boards are much more expensive than the cost of the one that Apple is going to install

  • How to get bootcamp to install from USB on Mid 2010 Macbook Pro in Mavericks

    Ok, finally ran into my first problem with Mavericks. It's a doozy. Please if anyone has any advice, let me know.
    My bootcamp partition was acting a little buggy. I also wanted to make the partition larger, so I went ahead and erased it, made a larger partition and was getting ready to install windows 7.
    Unfortunately, little to my knowledge, bootcamp assistant is programmed to not allow installation of Windows via USB if your computer had an optical drive in it's factory delivered form.
    I have removed my optical drive in favor of a second hard drive and encased my original superdrive into an External USB hub.
    There apparently used to be a solution involving editing the plist.info text document to allow USB installation. However, as of MAVERICKS, this document is now locked and unable to be edited.
    I was running windows 7 fine until I scrapped it, and now I have no way to re-install windows short of going through a laborious process of re-installing my optical drive into my laptop, installing, and then re-installing my hard drive back in. The only reason is due to a software bias for my series of laptop because it "used to have" an optical drive.
    Does anyone know of any way that I can bypass this issue to get Windows Re-installed to a bootcamp partition on a mid-2010 macbook pro without using the optical drive?
    Thanks in advance!

    Remove the Boot Camp partition only with Boot Camp Assistant, not with Disk Utility.
    Install or Reinstall OS X from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
      1. Select Disk Utility from the main menu and click on the Continue button.
      2. After DU loads select your startup volume (usually Macintosh HD) from the
          left side list. Click on the Erase tab in the DU main window.
      3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
          the Security button and set the Zero Data option to one-pass. Click on
          the Erase button and wait until the process has completed.
      4. Quit DU and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Install button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
               because it is three times faster than wireless.

Maybe you are looking for

  • External monitor looks horrible

    I've connected my Samsung SyncMaster 171v LCD monitor to my new Macbook with a mini DVI to VGA connector and get terrible results. I've tried setting to the native resolution of 1280 x 1024 as well as 1024 x 768(stretched) and 800 x 600 (stretched),

  • Locking PDF but only allow further signatures & get the list of of changes made after signing

    Hi, I have looked at Adobe Acrobat 9.0 and found the Signing > locking feature which blocks any changes after the document is signed. I need to know whether using Acrobat SDK, one could implement a similar locking option via plugin in a way that it O

  • Videos wont show on safari

    I've been trying to watch video that family and friends have posted; but they wont play on my computer. why is that ?

  • Overriding Default JTable Selection Behavior

    I'm attempting to override the default selection behavior of a JTable. For clicking, I want the table to behave basically as if the ctrl key was being held down all the time. That works great. I want the behavior of dragging a selection to behave a c

  • Very slow browser performance

    Hi and thanks in advance for your time. My internet browsing is painfully slow. I tested the speed on speedtest.net and on speakeasy.net, the result were: MP3 file download (5MB): 2 sec Video clip (35MB): 14 sec Movie (800MB): 5min Download: 20 MB/s