My New LP8 File Always Prevents Logic from Opening

hi guys, i have a minor crisis. heres the short version => a piece i've been working on all of a sudden caused Logic Pro 8 to crash, and when i try and open the crashed version it just causes it to crash again. it won't even open it. i can go to the previously saved version, but there would be a lot missing and i can't afford to lose it.
its a large file with lots of plug-ins and so forth, had i planned it better i would have used buses and so forth, but it shouldn't be doing this even having poorly planned everything. it crashed when i was messing with the volume automation for one track if that means anything.
i am worried that this is a glitch that apple is just going to tell me too bad about, but if anyone has any info please help. thanks a billion.
p.s. i already tried opening it without loading any of my software instruments (just canceling them as they try and open), i tried repairing disk permissions, i tried erasing that list in Library>>Preferences. i just have a bad feeling about this.

This seems to happen on a regular basis, projects get corrupted and nobody can understand why. Have you tried disabling the Audio Core and then opening the project? You could then bypass all plugins, enable the core and bring the plugs back one by one. As soon as you activate a "broken" plug Logic will crash and you know, which plug causes that. This procedure has helped me in the past.
Also try saving the project under a different name, but you'll probably have tried this already.

Similar Messages

Help, file error preventing me from opening project. Overwrite save as new?

Hi there, I've been working on a big project - saving locally and backing up at night, but now my daily file is corrupted and won't open... I'm getting the following
Do you want to overwrite the file or save as a new file?
When I select "Overwrite" or a File Save As, I get the following message in response:
Adobe Captivate could not open the file because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).
I'm using captivate 3. I wasn't doing anything other than trying to save the file at an interval through out the day as I always do.
I have plenty of hard drive space - so that is not the issue. I did move the project it off and delete it from the original source and try to reopen...any other suggestions or explanations for why this is happening?

Will try, Tom. I ended up just force quitting , which I lost my project.
Another question: I'm working in Photoshop Elements importing into FCE. I was told by Apple to work in 720 x 540. I created cute frames and borders around my pics. On the computer looks great, disc image looked great but when I burned to dvd, I lost most of my frames, borders. Is there any way to resize so that the borders, etc. can be seen without having to redo from scratch? Need to get this to a friend by tomorrow so I'm in a crunch for time.
Thanks so much!
Susie

Prevent user from opening an applescript file

Greetings,
I have written an Applescript for use by the User to change file permissions on folders or files they get from clients from outside our company. The permissions of these files denies the User from opening the files and work with them The script I wrote will change those permissions to Read/Write but also contains Administrator information with regards to Admin Name and Password. The script runs just fine.
Where my problem arises is I cannot find a way to prevent a User from using the Applescript application on their workstation to open my script and view the Admin name and Password. What I need to happen is to have the script run when the User places a file on the icon, but not allow a User to open the script to see the coding. I'm really new to Applescript and I figure i am missing something. Thanks in advance for any advice.

Are these items downloaded into the same folder in each user account?
That part is reliably the same or are users involved choosing the save location?
Frankly I'd scrap Applescript - it is a pain for anything involving admin privs & normal users.
Option 1…
Stick a task into roots crontab to chmod/ chown that location every 5 minutes or so!
If you want to be smart about it check if the perms are in a mess before you fix them. A shell script can do this. Obviously you need to check the path to give the correct user the ownership etc.
Option 2…
Set a launchd job to watch a specific folder & run a command when items are added - like folder actions without the crappy Applescript part
https://developer.apple.com/library/mac/documentation/Darwin/Reference/ManPages/ man5/launchd.plist.5.html#//apple_ref/do…
It would need to be a system level job since the user doesn't seem to have enough permission.
If you need to use an application to allow the user to have control an Applescript droplet could move the items to the watched folder, where the launchd job resets the perms. Then the items could be moved elsewhere via the script that runs from the watch job.
It all seems kinda kludgy, but sometimes that is how OS X is!
Perhaps this is outlandish & impractical but so is manually fixing stuff like this every time someone calls
Any thoughts?

How do you stop Safari from removing last download when it's of the same file type? (e.g., when I download a new pps file I can no longer open a pps file that I've just downloaded)

When I download a .pps file, I can open it from the downloads and everything is great. But if I try to download another one, then I can no longer access the previous download from the download bar. This is very annoying to me as I download and open dozens of these files every day. Is there some way that I can display all the files in the download bar and not just the last file downloaded of a certain type (a way to get Safari to stop hiding the .pps files)

To prevent Firefox from displaying form autocomplete suggestions, you can turn off that feature using the about:config page.
In the address bar, type or paste '''about:config''' and tap the Enter/Return key.
I suggest bookmarking this for easier future access.
In the search box, type or paste '''formf''' and tap the Enter/Return key.
Scroll down to '''browser.formfill.enable''' and tap the Toggle button to switch it from true to false.
That's it. Does it work on Facebook?
''The about:config preferences editor in the mobile version is similar in principle to the desktop version but many of the preferences available on the desktop version have no effect in mobile. This one I only tested on one site, but it seems to work.''

I recently brought an ipad 2, im wondering is there any way to hide files to prevent others from viewing them?

I recently brought an ipad 2, i wondering is there anyway to mark files hidden to keep others from viewing them??

well... there are some apps where you can store your passwords and stuff, but they will not prevent people from opening you photos/emails and get nosy while you are not watching.
I know what you mean.
Maybe you want to give some feedback to Apple: http://www.apple.com/feedback/ipad.html

Sandboxd prevents preview from opening images

The sanboxd is preventing me from opening some, but not all, images with preview.
The system.log shows:
Dec 16 23:36:17 computer_name Preview[7570]: PVImageContainer initWithURL:file://localhost/Users/username/Library/Containers/com.apple.Previe w/Data/file.jpg failed, error = Error Domain=NSCocoaErrorDomain Code=257 "The file âfile.jpgât be opened because you donât have permission to view it." UserInfo=0x104ef6960 {NSFilePath=/Users/username/Library/Containers/com.apple.Preview/Data/file.jpg, NSUnderlyingError=0x104e71ec0 "The operation couldnât be completed. Operation not permitted"}
Dec 16 23:36:17 computer_name sandboxd[10125] ([7570]): Preview(7570) deny file-issue-extension /Users/username/file.jpg
Dec 16 23:36:17 computer_name Preview[7570]: Bookmark failed to issue extension for item /Users/username/Library/Containers/com.apple.Preview/Data/file.jpg (depth=1): Operation not permitted
I have recently migrated from a macbook with 10.6 to a macbook air with 10.7. I used migration assistant via wifi.
The problem arises both on newly downloaded images as well as images that were transferred via migration assistant.
The file permission is 755, and File->View permissions looks perfectly fine.
Any idea what is causing this and how to I prevent this from happening again?

Hi Linc,
thank you for the suggestion, but unfortunately it did not help. For the top directory, and all subsequent directories, I have read&write (755) permissions, as well as for the files that i can not open.
This appears to happen randomly. Some directories are affected, some are not, and it appears to happen to all files in certain directories.
Interestingly, if I control-click and select e.g. Explorer, I can view the image. Also, if I copy the file to my Desktop, I can also view the image. So it only happens to Preview in certain directories.

Outlook Integration add in prevents outlook from opening

Hi All,
When the outlook integration executable (BO_SyncExt.exe) is running it prevents outlook from opening. Outlook just sits there saying loading user profile all the time. When the process is killed via task manager outlook opens. The issue seems to be intermittent, we've tried the usual uninstalling, re-installing, rebuilding the machine etc. it didn't work.
The problem doesn't happen on machines using office 2003 or 2007, only on Office 2010 (32 bit).
SAP version 8.8 PL20.
Any ideas what this might be?
Many Thanks,
Matt

Hi Jimmy,
it is 32-bit MS Office, I have had this issue both on 8.82 PL05 (Windows 7 32-bit) and PL07 (Win2008 R2 server 64-bit).
The Outlook Integration log shows some strange entries without error description:
2012-07-23 15:24:30 E CBO_AddIn::OnConnection ERROR: **************************************************************************
2012-07-23 16:36:01 E CBO_AddIn::OnConnection ERROR: **************************************************************************
2012-07-23 16:38:33 E CBO_GUIControl::ReleaseGUIControl ERROR: Exception in closing the Outlook...
2012-07-23 16:39:13 E CBO_AddIn::OnDisconnection ERROR: ############################################################################
2012-07-23 18:23:27 E CBO_AddIn::OnConnection ERROR: **************************************************************************
After this error (Exception in closing the Outlook...) I assume that the Outlook.exe hangs, therefore when opening Excel, I get an error message like 'Failed to open log file', so probably the hung Outlook.exe locks the log file. Of course opening Outlook isn't possible in that status.
After closing the process Outlook.exe, I can start Outlook again and Excel doesn't throw any error message. Nevertheless I tried also to run BO_SyncExt.exe in compatibility mode, I will observe this issue now.
Thanks
Sebastian

Something called "television fanatic plugin" which seems to have come with the Safari upgrade is preventing me from opening Safari. Help

Something called "television fanatic plugin" which seems to have come with the upgrade to Safari 5.1 is preventing me from opening Safari. I cannot find it on my computer. What do I have to do to eliminate it and be able to open Safari?

If the software doesn't have an uninstall feature, quit Safari and try manually removing the third-party add-on files. These files are usually installed in one or more of the following locations:
/Library/Internet Plug-Ins/
/Library/Input Methods/
/Library/InputManagers/
/Library/ScriptingAdditions
~/Library/Internet Plug-Ins/
~/Library/Input Methods/
~/Library/InputManagers/
~/Library/ScriptingAdditions
The first four locations listed are in the root-level Library on your hard disk, not the user-level Library in your Home folder.The tilde (~) represents your Home folder.
To find the Home folder in OS X Lion, open the Finder, hold the Option key, and choose Go > Library.

I have Microsoft Word for Mac 2011, version 14.3.1. When I try to open a document, an error occurs, says file type is "blocked from opening in this version." This was NOT immediately after a version update. Any ideas? Thank you.

I have Microsoft Word for Mac 2011, version 14.3.1. When I try to open a document, an error occurs, says file type is "blocked from opening in this version." This was NOT immediately after a version update. Any ideas? Thank you.

Take a look here:
http://support.microsoft.com/kb/953266
If that doesn't help, I'd suggest you take up the question in Microsoft's own forums or with Microsoft support.
Regards.

I have installed mountaion lion and I am getting an error 150:30 that prevents me from opening my photoshop cs4 extended. Does anyone know how to fix this?

I have installed mountaion lion and I am getting an error 150:30 that prevents me from opening my photoshop cs4 extended. Does anyone know how to fix this?
Thanks

It's a "licensing error" see this for what steps to take: Error "Licensing has stopped working" | Mac OS

How do I prevent Mail from opening when I click an email address in Safari?

My wife and I both use Yahoo! Mail. Neither of us uses the Mail app to manage our email. How do I prevent Mail from opening when we click an email address in Safari? Is it possible to direct Safari to open a separate web browser prompting us to log in to our Yahoo! Mail?

Hmm.. probably not.
You want to open Mail. Then go into Preferences > General and you will see something similar to this:
In the area marked Default Mail reader click on the pull down and at the bottom of the list it will say Other. You can see if you can select Safari here and if that will open up Safari.
Good luck.

How do I prevent iTunes from opening when I pug in my iPod?

How do i prevent tunes from opening when i plug in my ipod?

This will occur when there are photos and/or videos in the Camera Roll, which should be imported by your computer as with any other digital camera.
Depending on the iPhoto version you are running, this can be done via iPhoto preferences > connected camera opens > select no application.

Corrupt audio file prevents me from opening Logic project file

Hello,
I've been running Logic 8 for a couple years off my MacBook and have never encountered any significant problems of file corruption until recently.
The issue I encountered is this:
I've been producing a lengthy track in an on-going Logic project file for some time and after completing a recording session I saved and started deleting excess track copies to clean up my arrange window. Upon doing so Logic unexpectedly crashed.
After attempting to reopen the project file, it started its normal process of loading its respective audio files, but now it hangs on one particular audio file indefinitely (I'll refer to it as 'audio file x' for ease of reference), freezing and crashing Logic as a result. All of this project file's auto backup files are also incapable of being opened without giving me the same result and crashing Logic.
I have no way of opening this project file and getting at my most recent saved sequence!
I've tried removing this corrupt 'audio file x' from the project's audio folder and dragging it to the desktop, but this had no effect and I still can't open any recent version of the project file.
Older saved copies of the current project file do still open though (most likely because they were saved prior to the corruption caused by this suspect 'audio file x.') When opening an earlier iteration of the project, I get a message '1 invalid audio region found' (I assume referring to the corrupt suspect 'audio file x' that I removed to the desktop) but the project file is still able to open.
I realize I could import the audio files from the most recent version of the crashed file to an older project version and reconstruct things back to the way they were, but it would take me a lot of time and I'm hoping there may be some way to recover the un-openable project file by getting it to stop looking for this corrupted 'audio file x' on startup.
When I click 'show package contents' of the Logic Project file, I notice two items labeled 'displayState' and 'documentData.' From my troubleshooting I've come to the basic understanding that the 'documentData' file contains all the sequence data and settings for its respective Logic Project file.
I think the 'document data' of the unopenable project file in question may be corrupt because whenever I replace it with the 'document data' from an earlier Project file version, the file is able to open. This doesn't do me much good though, because it's document data from an earlier iteration of the project and I need to be able to get at the current sequence I had right before my file crashed.
Is there anyway to open a project file without letting it load its audio files? Or is there anyway I could get inside the 'document data' file to delete the reference/pathway in its audio bin to the corrupt 'audio file x' its hanging on?
Any insights would be greatly appreciated. I'm hoping there's some way I won't have to repeat a couple days worth of work. Thanks for your help!

stooby3535 wrote:
After further troubleshooting I've realized that the suspicious audio file that prevents the project file from opening is actually not corrupted itself. I can still play the audio file in other media software like Quicktime, etc. with no problem.
This leads me to believe the problem opening the project file lies solely with the corrupted 'documentData' file.
Does anyone have any ideas about how I could somehow open this project file and delete the reference of the troublesome audio file from the project's audio bin?
Well... it really sounds like the project itself is corrupted, that's one of the reasons all project files won't load from a certain point on.
Try this.
Reboot the Mac.
Open the Applications folder and boot Logic from it's icon.
As soon as the Logic Logo/graphic window appears on the screen hold down the control key. You will see a message pop up that says something like "Launch the Core Audio Driver" there will be yes/no choice available... select NO.
Go to the File menu and selct "open" go find your project file and see if it will open. If it does.. delete the audio file in question... however.. I would also look at any plugins you recently installed and are possibly using in this project...this sounds more like a plugin problem rather than an audio file problem, but that's just a gut feeling.
Anyway, if it opens delete whatever you suspect and save under a different name.
Reboot Logic and see if it can load the project.
pancenter-

Remove / unload external swf file(s) from the main flash file and load a new swf file and garbage collection from memory.

I can't seem to remove / unload the external swf files e.g when the carousel.swf (portfolio) is displayed and I press the about button the about content is overlapping the carousel (portfolio) . How can I remove / unload an external swf file from the main flash file and load a new swf file, while at the same time removing garbage collection from memory?
This is the error message(s) I am receiving: "TypeError: Error #2007: Parameter child must be non-null.
at flash.display::DisplayObjectContainer/removeChild()
at index_fla::MainTimeline/Down3()"
import nl.demonsters.debugger.MonsterDebugger;
var d:MonsterDebugger=new MonsterDebugger(this);
stage.scaleMode=StageScaleMode.NO_SCALE;
stage.align=StageAlign.TOP_LEFT;
stage.addEventListener(Event.RESIZE, resizeHandler);
// loader is the loader for portfolio page swf
var loader:Loader;
var loader2:Loader;
var loader3:Loader;
var loader1:Loader;
// resize content
function resizeHandler(event:Event):void {
    // resizes portfolio page to center
loader.x = (stage.stageWidth - loader.width) * .5;
loader.y = (stage.stageHeight - loader.height) * .5;
// resizes about page to center
loader3.x = (stage.stageWidth - 482) * .5 - 260;
loader3.y = (stage.stageHeight - 492) * .5 - 140;
/*loader2.x = (stage.stageWidth - 658.65) * .5;
loader2.y = (stage.stageHeight - 551.45) * .5;*/
addEventListener(Event.ENTER_FRAME, onEnterFrame,false, 0, true);
function onEnterFrame(ev:Event):void {
var requesterb:URLRequest=new URLRequest("carouselLoader.swf");
loader = null;
loader = new Loader();
loader.name ="carousel1"
//adds gallery.swf to stage at begining of movie
loader.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, ioError);
function ioError(event:IOErrorEvent):void {
trace(event);
try {
loader.load(requesterb);
} catch (error:SecurityError) {
trace(error);
addChild(loader);
loader.x = (stage.stageWidth - 739) * .5;
loader.y = (stage.stageHeight - 500) * .5;
// stop gallery.swf from duplication over and over again on enter frame
removeEventListener(Event.ENTER_FRAME, onEnterFrame);
//PORTFOLIO BUTTON
//adds eventlistner so that gallery.swf can be loaded
MovieClip(root).nav.portfolio.addEventListener(MouseEvent.MOUSE_DOWN, Down, false, 0, true);
function Down(event:MouseEvent):void {
// re adds listener for contact.swf and about.swf
MovieClip(root).nav.info.addEventListener(MouseEvent.MOUSE_DOWN, Down1, false, 0, true);
MovieClip(root).nav.about.addEventListener(MouseEvent.MOUSE_DOWN, Down3, false, 0, true);
//unloads gallery.swf from enter frame if users presses portfolio button in nav
var requester:URLRequest=new URLRequest("carouselLoader.swf");
    loader = null;
loader = new Loader();
loader.name ="carousel"
loader.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, ioError);
function ioError(event:IOErrorEvent):void {
trace(event);
try {
loader.load(requester);
} catch (error:SecurityError) {
trace(error);
addChild(loader);
loader.x = (stage.stageWidth - 739) * .5;
loader.y = (stage.stageHeight - 500) * .5;
removeChild( getChildByName("about") );
removeChild( getChildByName("carousel1") );
// remove eventlistner and prevents duplication of gallery.swf
MovieClip(root).nav.portfolio.removeEventListener(MouseEvent.MOUSE_DOWN, Down);
//INFORMATION BUTTON
//adds eventlistner so that info.swf can be loaded
MovieClip(root).nav.info.addEventListener(MouseEvent.MOUSE_DOWN, Down1, false, 0, true);
function Down1(event:MouseEvent):void {
//this re-adds the EventListener for portfolio so that end user can view again if they wish.
MovieClip(root).nav.portfolio.addEventListener(MouseEvent.MOUSE_DOWN, Down, false, 0, true);
MovieClip(root).nav.about.addEventListener(MouseEvent.MOUSE_DOWN, Down3, false, 0, true);
var requester:URLRequest=new URLRequest("contactLoader.swf");
loader2 = null;
loader2 = new Loader();
loader2.name ="contact"
loader2.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, ioError);
function ioError(event:IOErrorEvent):void {
trace(event);
try {
loader2.load(requester);
} catch (error:SecurityError) {
trace(error);
addChild(loader2);
loader2.x = (stage.stageWidth - 658.65) * .5;
loader2.y = (stage.stageHeight - 551.45) * .5;
// remove eventlistner and prevents duplication of info.swf
MovieClip(root).nav.info.removeEventListener(MouseEvent.MOUSE_DOWN, Down1);
//ABOUT BUTTON
//adds eventlistner so that info.swf can be loaded
MovieClip(root).nav.about.addEventListener(MouseEvent.MOUSE_DOWN, Down3, false, 0, true);
function Down3(event:MouseEvent):void {
//this re-adds the EventListener for portfolio so that end user can view again if they wish.
MovieClip(root).nav.portfolio.addEventListener(MouseEvent.MOUSE_DOWN, Down, false, 0, true);
MovieClip(root).nav.info.addEventListener(MouseEvent.MOUSE_DOWN, Down1, false, 0, true);
var requester:URLRequest=new URLRequest("aboutLoader.swf");
loader3 = null;
loader3 = new Loader();
loader3.name ="about"
loader3.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, ioError);
function ioError(event:IOErrorEvent):void {
trace(event);
try {
loader3.load(requester);
} catch (error:SecurityError) {
trace(error);
addChild(loader3);
loader3.x = (stage.stageWidth - 482) * .5 - 260;
loader3.y = (stage.stageHeight - 492) * .5 - 140;
removeChild( getChildByName("carousel") );
removeChild( getChildByName("carousel1") );
// remove eventlistner and prevents duplication of info.swf
MovieClip(root).nav.about.removeEventListener(MouseEvent.MOUSE_DOWN, Down3);
stop();

Andrei1,
Thank you for the helpful advice. I made the changes as you suggested but I am receiving a #1009 error message even though my site is working the way I wan it to work. I would still like to fix the errors so that my site runs and error free. This is the error I am receiving:
"TypeError: Error #1009: Cannot access a property or method of a null object reference."
I'm sure this is not the best method to unload loaders and I am guessing this is why I am receiving the following error message.
     loader.unload();
     loader2.unload();
     loader3.unload();
I also tried creating a function to unload the loader but received the same error message and my portfolio swf was not showing at all.
     function killLoad():void{
     try { loader.close(); loader2.close; loader3.close;} catch (e:*) {}
     loader.unload(); loader2.unload(); loader3.unload();
I have a question regarding suggestion you made to set Mouse Event to "null". What does this do setting the MouseEvent do exactly? Also, since I've set the MouseEvent to null do I also have to set the loader to null? e.g.
---- Here is my updated code ----
// variable for external loaders
var loader:Loader;
var loader1:Loader;
var loader2:Loader;
var loader3:Loader;
// makes borders resize with browser size
function resizeHandler(event:Event):void {
// resizes portfolio page to center
     loader.x = (stage.stageWidth - loader.width) * .5;
     loader.y = (stage.stageHeight - loader.height) * .5;
// resizes about page to center
     loader3.x = (stage.stageWidth - 482) * .5 - 260;
     loader3.y = (stage.stageHeight - 492) * .5 - 140;
//adds gallery.swf to stage at begining of moviie
     Down();
//PORTFOLIO BUTTON
//adds eventlistner so that gallery.swf can be loaded
     MovieClip(root).nav.portfolio.addEventListener(MouseEvent.MOUSE_DOWN, Down, false, 0, true);
function Down(event:MouseEvent = null):void {
// re adds listener for contact.swf and about.swf
     MovieClip(root).nav.info.addEventListener(MouseEvent.MOUSE_DOWN, Down1, false, 0, true);
     MovieClip(root).nav.about.addEventListener(MouseEvent.MOUSE_DOWN, Down3, false, 0, true);
//unloads gallery.swf from enter frame if users presses portfolio button in nav
     var requester:URLRequest=new URLRequest("carouselLoader.swf");
     loader = new Loader();
     loader.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, ioError);
     function ioError(event:IOErrorEvent):void {
     trace(event);
     try {
     loader.load(requester);
     } catch (error:SecurityError) {
     trace(error);
     this.addChild(loader);
     loader.x = (stage.stageWidth - 739) * .5;
     loader.y = (stage.stageHeight - 500) * .5;
// sure this is not the best way to do this - but it is unload external swfs
     loader.unload();
     loader2.unload();
     loader3.unload();
// remove eventlistner and prevents duplication of gallery.swf
     MovieClip(root).nav.portfolio.removeEventListener(MouseEvent.MOUSE_DOWN, Down);
//INFORMATION BUTTON
     //adds eventlistner so that info.swf can be loaded
     MovieClip(root).nav.info.addEventListener(MouseEvent.MOUSE_DOWN, Down1, false, 0, true);
     function Down1(event:MouseEvent = null):void {
     //this re-adds the EventListener for portfolio so that end user can view again if they wish.
     MovieClip(root).nav.portfolio.addEventListener(MouseEvent.MOUSE_DOWN, Down, false, 0, true);
     MovieClip(root).nav.about.addEventListener(MouseEvent.MOUSE_DOWN, Down3, false, 0, true);
     var requester:URLRequest=new URLRequest("contactLoader.swf");
     loader2 = null;
     loader2 = new Loader();
     loader2.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, ioError);
     function ioError(event:IOErrorEvent):void {
     trace(event);
     try {
     loader2.load(requester);
}      catch (error:SecurityError) {
     trace(error);
     addChild(loader2);
     loader2.x = (stage.stageWidth - 658.65) * .5;
     loader2.y = (stage.stageHeight - 551.45) * .5;
loader.unload();
loader2.unload();
loader3.unload();
     // remove eventlistner and prevents duplication of info.swf
     MovieClip(root).nav.info.removeEventListener(MouseEvent.MOUSE_DOWN, Down1);
//ABOUT BUTTON
     //adds eventlistner so that info.swf can be loaded
     MovieClip(root).nav.about.addEventListener(MouseEvent.MOUSE_DOWN, Down3, false, 0, true);
     function Down3(event:MouseEvent = null):void {
     //this re-adds the EventListener for portfolio so that end user can view again if they wish.
     MovieClip(root).nav.portfolio.addEventListener(MouseEvent.MOUSE_DOWN, Down, false, 0, true);
     MovieClip(root).nav.info.addEventListener(MouseEvent.MOUSE_DOWN, Down1, false, 0, true);
     var requester:URLRequest=new URLRequest("aboutLoader.swf");
     loader3 = null;
     loader3 = new Loader();
     loader3.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, ioError);
     function ioError(event:IOErrorEvent):void {
     trace(event);
     try {
     loader3.load(requester);
}      catch (error:SecurityError) {
     trace(error);
     addChild(loader3);
     loader3.x = (stage.stageWidth - 482) * .5 - 260;
     loader3.y = (stage.stageHeight - 492) * .5 - 140;
     loader.unload();
     loader2.unload();
     loader3.unload();
     // remove eventlistner and prevents duplication of info.swf
     MovieClip(root).nav.about.removeEventListener(MouseEvent.MOUSE_DOWN, Down3);
     stop();

New audio files receives error message from iTunes - You do not have enough access privileges for this operation.

Every time a new audio file is downloaded onto my desktop, (or if I double click on a new audio file) iTunes no-longer will play them. It gives an error message stating: Attempting to copy to the disk "Mackintosh" failed. You do not have enough access privileges for this operations.
Please can you help me to resolve this situaion. I confess that I am not very computer savvy.

Launch iTunes on the computer.
From the iTunes menu bar click Store > Authorize This Computer
Make sure to sign in using the same Apple ID used on the iPhone.
Then sync your iPhone.

My New LP8 File Always Prevents Logic from Opening

Similar Messages

Maybe you are looking for