My off switch is not working

My off switch is not working on my iphone 5

Make an appointment at an Apple Store and have them evaluate the device and possibly replace it if still under warranty.
In the meantime, you can enable AssistiveTouch which floats a virtual button on-screen which can mimic all hardware buttons on the device:
Settings>General>Accessibility>AssistiveTouch: turn ON
*Note* If you power off the device using the AssistiveTouch panel (tap the on-screen AssistiveTouch button, Device>Lock Screen (tap and hold to power off)), you will NOT be able to power on the device if your Sleep/Wake (power) button is not functioning. You will need to connect the powered off device either to a PC's USB port or an external charger to power the device back on.

Similar Messages

Ipad app icons shaking but won't delete, home button does not work, power off switch does not work

I just got a new ipad air and have started to add apps to it. I have added a couple of free apps which I have also deleted (moved to icloud). I have also a couple of apps (free & purchased) which I have on it now.
Now my problem:
I tried to remove another free app. I press and hold the icon. All app icons shake and display the 'x' for removing, but the 'x' for does not work on any of the icons. Also, after this, the home button does not work as the icons keep shaking even while I am pressing the button. And the power off switch on the side of the device does not work either. If I close the smart cover and reopen it shows the home display and all the icons still shaking (instead of showing the passcode sign-in display). Fortunately (well, fortune in the misfortune) if I press the home button and off switch a couple times each and close the smart cover and wait, the device awakes normally. Well, normally until I try to remove any app.
So what do I need to do to fix this?
Thanx
Brian

Glad it worked. Anytime your iPad acts up, the reboot/reset is a common first thing to try. And it clears up many issues and glitches.
enjoy your new toy

I have a 4th gen ipod touch. i reset all settings and it has not restarted now for 8 hours. On/ Off switch is not working. How do I restart my Ipod Touch?

i have a 4th gen ipod touch. i reset all settings and it has not restarted yet. it has been resetting for about 8 hours now. It won't let me restart the iPod touch. the loading screen just keeps running.

Hi paul.lisa,
Then when you press down on one of those icons (on the actual Home screen), and all the icons start to wiggle, a small black "x" should show up in the upper left-hand corner:
Cheers,
GB

TS3274 My sound On/Off button does not work. I have to turn volume all the way down to silence it. Is the switch faulty, or am I missing sometging

The volume On/Off switch does not work. It does not mute sound. I have to turn volume all the way down to silence the sound.
Is the switch faulty or am I missing something here?

well first remove the case. check the headphone jack for debris. do a hard reset by holding sleep/wake and home button down together for 10 seconds untill apple appears. backup and restore via itunes. if issue persists the device needs repair

My iPod's OFF/On switch is not working and I have checked over internet that this problem is very common with iPod Nano 6th generation, my iPod is now out of warranty period. What shall i do now?? Please Suggest!!

My iPod's OFF/ON switch is not working and I have checked over internet that this problem is very common with iPod Nano 6th generation, my iPod is now out of warranty period. What shall i do now?? Please Suggest!!

You can do an out-of-warranty replacement at an Apple Store for a fee, get a 3rd party site to repair it, sell it for parts, or get a new one.

Satellite A110 - WiFi switch is not working with new WiFi card

Hello Everyone
I have a problem with my Toshiba Notebook Satellite A110-178 (PSAB0E). I replaced the original WIFI card Intel 3945abg with Intel Link 5100 and on the new wifi card wifi hardware switch is not working.
New wifi card is discovered and drivers working correct but when I try to scan for wifi networks with IntelPro/Wireless software I have message to turn on hardware switch but it's turn on and not work. On old wifi card swich is working correct - orange light is on. On new card light is off and swich is not working.
Please help

Hi
Maybe you could enable the Wlan card using different way;
Go to device manager -> WLan card properties -> Advanced tab
There you could check if there is a option which would enables the WLan.
Its worth a try
Otherwise its a compatibility issue like suggested by PinkPanther
I read in different threads that this could happens if there is a different pin assignment on miniPCI WLan card and this could not match with the miniPCI slot on the mobo...

I have a problem with wifi in my iphone 4s, i already try everything and download latest version 7.1(11D167) but wifi switch is not working, its my humble request to Apple support team that pls resolve this problem as soon as possible because

I have a problem with wifi in my iphone 4s, i already try everything and download latest version 7.1(11D167) but wifi switch is not working, its my humble request to Apple support team that pls resolve this problem as soon as possible because its a prestiage of Apple Company.
Pls inform me how can i resolve the problem of wifi.

You have to go to autherized iPhone agent.

TA44551 My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work.

My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work. I tried to restore it again and charged it in three different locations with different cables. etc but nothing. Suggestions?

- After charging for 1/2 hour or so, does iTunes see the iPod? If yes, restore the iPod from backup.
- If no, se if placing the iPod in recovery mode will make it visible so you can restore the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore

I am signed into the App Store on my iphone 4 and one of my apps need updating and my brother was signed into it but its like its locked to his Apple ID I have tried signing out and turning my phone off its just not working

I am signed into the App Store on my iphone 4 and one of my apps need updating and my brother is signed into it because I didn't have any credit to make an ID so he signed in so I could download apps but its like its locked to his Apple ID I have tried signing out and turning my phone off its just not working please help.

Apps are locked to the Apple ID that was used to download them. You will have to sign in as your brother in order to update it.

Software Update Point Switching is not working for some Clients

Hi there,
I found nothing similar here and I hope this is the right section.
I´m running ConfigMgr 2012 R2 where one of the Site Systems from one of the Primaries is located in an untrusted Forest in a perimeter Network. The Site System there has the MP, SUP and DB Roles. In general it works great. The Systems in that untrusted Forest
get the SCCM Agent pushed, see and can install published Software packages and receive Windows Updates. But there are a few systems where everything works, except Windows Updates.
So I had a deeper look at what is happening and found out that the SUP switching is not working for them. They always try to contact the SUP from the Primary, which they cannot reach (this is intended).
From how I understand SUP switching as described here
http://blogs.technet.com/b/configmgrteam/archive/2013/03/27/software-update-points-in-cm2012sp1.aspx#pi140062=1
the Windows Update Agent tries to connect to a SUP every 30 minutes and after 4 failed attempts he will try to connect to the next one until he finds one which works.
As I said before, this seems to work for most systems in the untrusted forest, but some do not make any intentions to switch the SUP.
So my next step was to find out from where the Update Agent can get the information of the available SUPs. I think they either don´t receive the information that other SUPs exist, or if the Information is there, they don´t realize that there´s an error and
make no attempt to switch.
I used the System Center Support Center to gather all Information from some of the systems with that problems (Log Files, WMI information, registry information, policies etc.) but I cannot find where SCCM or the Update Agent store the information which SUPs
are available in my environment.
I´m sure the problem is on the Systems which fail to connect to the right SUP and not in the SCCM infrastructure itself, because for most of the systems everything is working just perfect. Unfortunately in the Blog Post above there´s also no information
where this information is stored and how it is obtained by the clients. In the comments there´s even one post which describes the same problem I have here, but there was no answer. I hope someone can point me into the right direction, because I´m stuck currently.
Things I tried additionally to all the log file / WMI / registry sniffing:
Removing the Software Distribution Folder and restarting the Windows Update Agent
Removing the WindowsUpdate Registry folder in the HKLM\SOFTWARE\Policies\Windows section in the Registry and restarting the Windows Update Agent.
Tried to reset the WUAgent with wuauclt /Resetauthorization additionally to the steps above.
I also tried to manually set the WUServer and WUStatusServer Keys in the registry to the new Server, but as soon as the next Update Scan cycle runs, the value is set back to the URL of the Primary Sites SUP
Is someone having additional ideas? It seems to me older systems are more affected (which were configured for a standard WSUS before SCCM 2012 was deployed) than newer ones which were installed when SCCM was in place already. But I don´t know what else to
"reset" on those machines without reinstalling them.

Thank you very much for your response. I must have missed that one by looking through numerous Logfiles. In this, there´s indeed a list of all available SUPs. So according to the LocationServices.log the machine should have a choice.
The WMI Key however, contains just one entry and this is the URL of the Primaries SUP which is not reachable in the untrusted forest. Is it OK that the WMI entry includes only one entry? If yes, what process is putting the results from the LocationServices
into WMI? It seems like the Windows Update Agent is feeded from the WMI Key then. If this is the case my problems seems to be the "communication path" between these two components.
Is this the job from the SCCM Agent, the Windows Update Agent or maybe some third component I´m not aware of? I wonder how I can fix this.

Location switching does not work on Vista

Hi, my location switching does not work. I have reinstalled my Access Connection several time but still does not work. I have several profiles and I need to switch manually depending on my location profile. My Access Connetion however seem to know the right profile (dot next to the profile indicate it picked up the right wireless signal) but never connect to the profile
Is there any Vista feature that is controlling the access as well? Do I need to disable? I remember the older version of Access Connection will ask to disaable some windows services when using Access connection.
My Config is
- R61
- Intel(R) Wireless WiFi Link 4965AG. File Version 11.1.1.16
- OS Vista 32 Business - with up to date patches
- Access Connection 4.42 for Vista Build 7RCN38WW
Thank you in advance for pointers

Hi, my location switching does not work. I have reinstalled my Access Connection several time but still does not work. I have several profiles and I need to switch manually depending on my location profile. My Access Connetion however seem to know the right profile (dot next to the profile indicate it picked up the right wireless signal) but never connect to the profile
Is there any Vista feature that is controlling the access as well? Do I need to disable? I remember the older version of Access Connection will ask to disaable some windows services when using Access connection.
My Config is
- R61
- Intel(R) Wireless WiFi Link 4965AG. File Version 11.1.1.16
- OS Vista 32 Business - with up to date patches
- Access Connection 4.42 for Vista Build 7RCN38WW
Thank you in advance for pointers

Hello. after updating to Ios 8 my iPhone is terribly! Discharged very quickly, many transitions between applications, the program takes off, ringtones do not work - works a standard call, the keyboard freezes, bad messages are sent, often loses the n

Hello. after updating to Ios 8 my iPhone is terribly! Discharged very quickly, many transitions between applications, the program takes off, ringtones do not work - works a standard call, the keyboard freezes, bad messages are sent, often loses the network. what have you done with your phone moym ?! solve all these problems! I beg of you!

Hello. after updating to Ios 8 my iPhone is terribly! Discharged very quickly, many transitions between applications, the program takes off, ringtones do not work - works a standard call, the keyboard freezes, bad messages are sent, often loses the network. what have you done with your phone moym ?! solve all these problems! I beg of you!

HT5622 I dowloand ios7 but is not working FaceTime and iMessage.I tried turn off but still not working.

I download IOS 7 I'm really dissapoint because my FaceTime and iMessage is not working.I tried turn off but is not working.:(

Try resetting the SMC.
MacBook and MacBook Pro with a battery you can remove
Shut down the computer.
Disconnect the MagSafe power adapter from the computer, if it's connected.
Remove the battery.
Press and hold the power button for 5 seconds.
Release the power button.
Reconnect the battery and MagSafe power adapter.
Press the power button to turn on the computer
To reset the SMC on newer Mac portables with a battery you cannot remove
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.

HT1414 my wi fi on/off button is not working. any suggestions?

my wi fi on/off button is not working when i touch it. any suggestions on how to fix it or what to do?

Is it disabled, that is "grayed out"? If so, see this thread, and good luck: https://discussions.apple.com/thread/4313031?start=0&tstart=0
If not, turn phone off/on again. If that doesn't do it, reset by holding down the power and home buttons until you see the apple logo (ignore the slide to turn off message). Finally, you can try restoring the phone from backup.

Wifi switch is not working ios-7.1.1

iphone 4s
version: ios 7.1.1
wifi & bluetooth switch is not working.

Hello there, pragneshgajjar.
The following Knowledge Base article provides some great information that can help you with your issue:
iOS: Wi-Fi settings grayed out or dim
http://support.apple.com/kb/ts1559
Additional troubleshooting information is located in these articles as well:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
and
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

My off switch is not working

Similar Messages

Maybe you are looking for