My old Time capsule was not working well.  I replaced it with a new Airport Extreme.  Now I can see the other airport express stations.  I tried resetting them, but it did not work.  What do I do?

I replaced my old time capsule with a new airport extreme.  I have 3 airport express stations that I have all around the house.  (2 1st generation, 1 second generation).  I can't see them with airport utility.  I tried resetting, but no luck.  Any suggestions?

Bring all the express to the same room as the mac you are using to setup the network..
One by one, plug them in and do full factory reset on them.. they should then show up in the Airport utility as Other Wi-Fi devices (1) and you can select them and continue the setup.
If that fails try using the airport utility on ipad or iphone as they are far less problematic than Yosemite in particular.

Similar Messages

  • My toolbar won't add new sites when I want it too, I tried resetting it, but it did not help, what can I do?

    I have been trying to add new sites to my toolbar, but it won't. I don't know when it started, but it has been quite a while.

    So I am not second guessing too much, tell us where you are in fact plugging it in.   I merely mentioned the keyboard USB socket (not even knowing what computer type you have (it helps to put that in your user profile) and maybe you don't even have a keyboard socket) because I (and others) have tried plugging a flash drive into my keyboard's USB and gotten a "too little power" message.

  • I forgot my security questions. I went to reset them, but I did not recieve any email address, even in the spam folder.

    I wanted to download a certain book that was in the iBooks store. I bought an iTunes gift card ($25) and when I tried to buy the book, it said that I had to answer my security questions, which I forgot. I went to my apple id and tried to click on the link that would send an email to you to reset your security questions and for the past hour I didn't recieve a single email. I even checked my spam/junk folder!

    I have gone though this process yesterday and worked for me.
    I would suggest you to have following things handy before calling Apple
    1. Serial number of apple device which is associated with ur apple id
    2. At least one answer to your old security questions
    3. And you should be logged on to my account page of apple Id so that when customer care demands generation of 4 digit code you can do it.
    This complete process is very simple but may take some time but apple guy was very helpful in my case.
    Also remember the answers to the security questions are case sensitive.
    Good luck

  • I want to send my mails from Gmail to all of my groups but no one of them can see the others and secondly I like to send them in groups. If this app is free is better if not its ok

    1.- send my emails from gmail to groups
    2.- no one from the group be able to see the others that I send the mail. Is there any app...just name it

    1.- send my emails from gmail to groups
    2.- no one from the group be able to see the others that I send the mail. Is there any app...just name it

  • Signed into hbo now.  almost immediately received error saying my subscription expired but it was only 30 minutes old.  tried to resubscribe but it did not recognize my email address.  what the heck????

    signed into hbo now.  almost immediately received error saying my subscription expired but it was only 30 minutes old.  tried to resubscribe but it did not recognize my email address.  what the heck????

    i just called hbo now.  they are on system overload.  apparently no one can sign in.  she recommended i try to sign in during the middle of the night to see if it works. they "hope" to have the problems resolved in short order.  she said not to sign up for a new subscription because you will be charged for 2 subscriptions. 

  • My Ipod is stuck in recovery mode with the plug in to itunes thing on the screen I tryed to restore it but I keep getting a error 28 and I tryed to do the reset thing but it did not work what do I do?

    My Ipod is stuck in recovery mode with the plug in to itunes thing on the screen I tryed to restore it but I keep getting a error 28 and I tryed to do the reset thing but it did not work what do I do?

    Hi,
    You could see if this helps...
    DFU Mode / Unable to Update or Restore
    http://support.apple.com/kb/HT1808
    DFU Mode
    Open iTunes and Connect the iPod to your Mac
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time
    After 10 Seconds release the Sleep/Wake Button until iTunes tells you it has Detected an iPod in Recovery Mode...
    The Phone Screen will remain Black... Now Restore.
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414

  • HT201272 I need a refund on my books I purchased from itunes because my ipod will not support them. I was on the apple chat last night and they tried to help but it did not work and they told me my ipod was to old to support them. I was wondering how do I

    I need a refund on my books I purchased from itunes because my ipod will not support them. I was on the apple chat last night and they tried to help but it did not work and they told me my ipod was to old to support them. I was wondering how do I get the refund on them?

    Try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
    If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • TS3474 Ipod is showing a unhappy face with the apple website for the iPod support.  I have reset it but this did not work.  any suggestions?

    Ipod is showing a unhappy face with the apple website for the iPod support.  I have reset it but this did not work.  any suggestions?

    See here: iPod displays a sad iPod icon
    And here for more troubleshooting.
    https://discussions.apple.com/message/2369954?messageID=2369954#2369954
    B-rock

  • Trying to restore after getting a new hard drive.  I can see the backup on the Time Capsule and on the correct date but it is Greyed out.  That is it wont let me open it and restore the machine.  Have tried also Migration Assistant, no luck.

    Trying to restore after getting a new hard drive.  I can see the backup on the Time Capsule and on the correct date but it is Greyed out.  That is it wont let me open it and restore the machine.  Have tried also Migration Assistant, no luck.

    https://discussions.apple.com/thread/5210788?tstart=0
    At startup hold down the Command+Option/Alt+r keys until you see a globe on the screen. Then use disk utility to partition and format the drive HSF+ and then select Reinstall Mac OS X. whatever version of OS X that originally came on your system will be installed and then you can upgrade back to Mavericks.

  • Some email images do not show while using the icloud web app.  I can see the images on my IOS devices and in gmail but I only see a small gray box in the icloud web mail app.  Load HTML images is checked in preferences.

    Some email images do not show while using the icloud web app.  I can see the images on my IOS devices and in gmail but I only see a small gray box in the icloud web mail app.  Load HTML images is checked in preferences.  Is there a solution to this issue?

    I've seen the opposite issue.  My wife recieved an email with jpg attachments.  She couldn't see or print them on her iPhone 4S but they showed up fine in iCloud or in the mail app.  I had her forward the email to herself and then they showed up.  I assume there is an issue with how Apple is processing the attachments and resending causes them to get reformatted in a way that makes them easier to handle.
    So yeah.  Seems like some bugs.  Hope Apple fixes them soon.

  • I am trying to reset password, but I did not receive the promised email that should allow me to reset. Can you help?

    I am trying to reset password, but I did not receive the promised email that should allow me to reset. Can you help?

    Check your junk or spam mail folder.  Also, if you established a rescue email, it could be going to that email address.  If all else fails:
    Contact applecare and ask for account security. 
    AppleCare US phone number: (800)-694-7466
    Contact Apple for support and service
    http://support.apple.com/kb/HE57

  • I have a folder from today that won't let me change its name. I can change the other folders just fine. I do it routinely... any ideas what I screwed up?

    I'm as a loss. I don't understand why today's folder "2014-06-06" won't let me add "_Kim" to the end. I do it will all my folders since I download from a couple of cameras.

    sorry... in PS cc and I closed Photoshop, just in case.... it didn't make 
    any difference and it hasn't ever been an issue before.
    In a message dated 6/6/2014 7:03:57 P.M. Eastern Daylight Time, 
    [email protected] writes:
    I  have a folder from today that won't let me change its name. I can change
    the other folders just fine. I do it routinely... any ideas what I 
    screwed up?
    created by ssprengel (https://forums.adobe.com/people/ssprengel)  in 
    Photoshop Lightroom - View the full  discussion
    (https://forums.adobe.com/message/6440564#6440564)

  • I can not open iTunes. It started when an upgrade appeared. Now I get this message when I try to open itunes. can not find MSVCR80.dll     Then I get ERROR 7 (windows error 126)   I tried reinstalling iTunes but that did not help. Please Help Me!

    I can not open itunes on my computer. It started when an upgrade appeared. Now I get a message that states This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem. I tried to reinsall the application but it did not help. I also get a message iTunes was not installed correctly. Please reinstall iTunes   Error 7 (Windows error 126)   Please Help me!

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99623)

  • Screen sharing option no longer works after updating to iOS Maverik. I am using AIM and so is the other person who i am trying to share my screen with. .

    I am using AIM and so is the other person who i am trying to share my screen with. I log into AIM with an @aol.com account. I can request to share my screen and share the other person's screen. The window will pop up on the other computer, but after clicking accept it will go back to saying that there is a request for screen share. What should I do to fix this?

    HI,
    To be clear, iOS = iPhone and iPad and some iPod Touches and the Operating System they use.
    Mac OS X = the Operating System Mac computers use.
    Regarding the AOL account, is this actually from AOL and have the Chat/Messaging option enabled ?
    Or is it a Name registered with the AIM part of AIM ?
    You can have AOL as your ISP  and have an email and User ID from them.
    This needs to have the ability to use the name as a Chat name enabled (or at least it used to)
    AIM, which actually stands for AOL Instant Messaging has it's own registration site.
    Nowadays  you register for a AIM email (although activating it for mail is another additional step).
    It used to be that the bit before the @aim.com bit was the user name you used in Chat applications that could use AIM.
    Previous to the current system you could in fact register just a Screen Name with them.
    Apple (and a few US based ISPs) also have agreements with AIM that their (Apple, etc.)  emails are recognised as Valid AIM Screen Names.
    This means those issued by  Apple ending in @mac.com, @me.com issued from the iCloud registration and @icloud.com.
    (You do have to keep your password to 16 characters or less.)
    From what you are saying you seem to be sure that you can see each other as On Line in your respective AIM Buddy lists ?
    In Messages in both Mountain Lion and Mavericks you do not have to display the Buddy lists
    (See the Window Menu plus the General Section of the Preferences to separate them)
    Are you also saying that in the Video menu the option to allow Screen Shares is Enabled ?
    Is it done at both ends ?
    In iChat you could offer to Share your Screen with a Buddy without the option being On  (they could not ask to share yours or offer theirs).  I have not tested this in Messages.
    6:55 pm      Sunday; November 3, 2013
      iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • HT1451 I am trying to move two ring tones from my Iphone 4 to my new Iphone 5.  I can see the ringtones on my old device in Itunes but I cant seem to move them to the Library or to the new device.

    I am trying to move 2 ringtones from my Iphone4 to my new Iphone5.  I can see the ringtones in Itunes on the old device.  I cant seem to copy them to the library or to the new phone.  Do you have any suggestions?

    Hello DelaineF,
    Congratulations on your new iPhone 5!  It sounds like you would like to transfer your ringtones from your iPhone 4 to your iPhone 5. 
    If the ringtones were purchased from the iTunes Store, you can transfer them to iTunes using the steps in this article:
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer
    http://support.apple.com/kb/ht1848
    Once you have the ringtones on your computer, I recommend using the steps in the following article to sync it to your iPhone 5:
    iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
    http://support.apple.com/kb/ph12313
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

Maybe you are looking for

  • Tcode does not appear

    I am doing mass change to the contracts thru portals but the TCODE does not appears in SRM table.  I there anyway to make the T-CODE appear in SRM. Tcode in SRM is bbp_ctr_mass. Thanks, AP

  • Code not getting executed:

    The requirement if comm+salary is >=3000 then all the details laong with emp info have to be inserted into emp table and comm+sal between 10000 and 20000 the same have to be inserted into emp table. PLZ CHECKOUT AND SPECIFIY THE RIGHT CODE TO DO IT.

  • Fail Messages and Calls - iOS5.0.1

    Hey Apple, I have been having problems sending out messages since the update. It shows "Sending" and nothing else , about 6 minutes later , Message sending failure pops out , and the phone was trying to search for the carrier . I found out that , eve

  • Get URL in AS3

    At the end of my movie I want to launch a URL that loads up another Flash movie. In the past I would use something like getURL(" http://www.whatever.com"); Any ideas on how to perform this task in Actionscript 3?

  • Using callbacks with a USB connected VISA instrument?

    I have an Agilent 34972 connected by USB to a Windows 7 machine. I am using LabWindows/CVI and the VISA drivers. I cannot find a way to setup a callback which will react to an ALARM event on the Agilent, ie. the Agilent is set up so that certain sign