My one week ipad2 won't turn on after working fine all day, didn't fall or anything, just died quietly with a full battery, what can i do?

Please help me with this.
I used it earlier today with no problems, later when i tried to use it again, it wouldn't start working or making any noise even when i plugged it.
I was using an access code, maybe it has something to do with it?

Lalulu-
Try restarting (rebooting) the iPad by holding the home and sleep buttons for several seconds until the Apple logo appears. Then let it restart, and it should be OK.
If that does not work, give it at least an hour connected to the wall charger to be sure the battery has enough energy to start up.
Otherwise you may need to make an appointment with the Apple Store Genius.
Fred

Similar Messages

HT1430 My iphone died suddenly with a full battery and it won't turn back on.

My iPhone 4 died suddenly with a full battery. I have tried, multiple times, holding the home button and the sleep/wake button at the same time for over 3 minutes. I have even tried doing that with it plugged in, even though it had a full battery when it stopped working. Any suggestions on what to try next?

Go through the restoring steps described here:
iPhone, iPad or iPod touch: Not responding or does not turn on
If that doesn't work, try recovery mode as described a little further down in the same article.

TS1425 My iPod Classic was working fine all day. Came home and uploaded to voice memos via iTunes, now there is no sound coming from my iPod. I've used both headphones and a docking station. The songs don't even begin, they just skip to the next one.

My iPod Classic was working fine all day. Came home and uploaded 2 files via iTunes, now there is no sound coming from my iPod. I've tried both headphones and a docking station......nothing. The songs don't even engage, they skip to the next one. I've tried rebooting the iPod and still nothing. Any ideas?
Kim

Hi, and welcome to Apple Discussions.
Have you tried resetting the PMU?
I'm not optimistic that this will help any more than the procedures you've already tried, but it won't hurt to try.
Do you still have your OS 9 installation? If so, try booting into OS 9 and see if the problems with the audio are happening there, too. If so, you can bet it's a hardware problem.
How big is your hard drive and how much space remains available on it? If you don't have your OS 9 installation in order to check out whether it's a hardware problem and you have enough available hard drive space, you may want to try an Archive and Install of the OS in order to make sure it isn't an OS X system-wide problem. If that doesn't do it, you could back up your hard drive and restore your software.
All of this may just be spinning your wheels, but it's all stuff you can try before shelling out a lot of money for repairs.

Note 3 won't answer a call by using the "answer" voice command. Other voice commands work fine (ie 'volume up') and speech to text works fine. Tried it in the car and in a quiet room at home. What am I missing?

Note 3 won't answer a call by using the "answer" voice command. Other voice commands work fine (ie 'volume up') and speech to text works fine. Tried it in the car and in a quiet room at home. What am I missing?

Rodilator,
We'll figure this out together! Can you please walk us through the exact steps you're taking to answer a call when it comes in?
SarahO_VZW
Follow us on Twitter @VZWSupport

Hello... can anyone help, my late 2010 MBA's - OS X Lion 10.7.5 wifi won't turn on after a deep sleep

can anyone help, my late 2010 MBA's - OS X Lion 10.7.5 wifi won't turn on after a deep sleep.. thanks..!

Hi John,
Thanks for the additional information. What I would try next is resetting System Management Controller:
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
You can find the full article here:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
If this still doesn't help, it would be time to take it in to be looked at. You can setup an appointment at a Genius Bar by clicking on the following link:
http://www.apple.com/retail/geniusbar/
Best,
Sheila M.

My Ipad2 won't turn off. I've tried the reset method, holding both buttons down for at least 10 seconds, but this doesn't work. I'm on version 5.1.1 and all other functions work except that I cannot get onto the internet via wi-fi either. Help ??

My Ipad2 won't turn off. I have tried the reset method by holding both buttons down for at least 10 seconds, but this doesn't work. I can't get onto the internet via wi-fi either (don't have a 3G card fitted). All other functions seem to be working OK including charging. Not had this problem before, but I recently upgraded software to 5.1.1 so is there a bug in there somewhere?

Look at last link.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

My iPad2 won't turn on. It will act as if turning on but when I slide to unlock it freezes. I have tried to reset and it will not. Any ideas?

My iPad2 won't turn on. It will act as if turning on but when I slide to unlock it freezes. I have tried to reset and it will not. Any ideas?

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

LIveView won't turn on after removing from watch strap

I removed the LiveView from the watch strap to charge it and it turned off. I must have jostled it somewhere.
It won't turn on and the LED doesn't come on to indicate it's charging.
I seems the battery may have come loose. Do I need to pry it open or is there an optimal location to smack it to get the battery to reseat itself?

Found the right place to smack it. Whacked it with some BBQ tongs and was able to turn it back on.
I'll be more careful in the future. This is the second time it's done this in the last week or so.

MacBook Pro 15" won't turn on after a shut down.

My MacBook Pro 15" late 2008 mavericks won't turn on after a shut down. Tried SMC reset, plugged and unplugged charger multiple times as well as installing the battery. It has started that after a while I have replaced my old battery with a new one,upgraded to Mavericks and increased my memory to 4GB. In the beginning after I would install every time the battery ,it' would turn on after 8-10 tries. Today it's completely unresponsive . Tested different outlets, with and without battery,nothing worked. I also heard that some other people have this issue once they have updated their operating system from 10.5.8 to Mavericks. Is that the problem.? Has anyone found a solution to this?

Hi there Olgabinou,
You may find the troubleshooting steps in the article below helpful.
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/ts1367
-Griff W.

Turn on! My mac won't turn on after sleeping!

Ever had a problem where your computer won't turn on after sleeping for a few minutes? (I've discovered that too many downloads cause this) Anyway... have you ever tried pushing the power button for one second? Try it! It's been working for me! Hope this helped!
(If it still won't turn on, try typing in letters randomly for one minute. Just type anything like: asdjhas)

Try resetting the SMC and PRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM

Ipod 7th generation. bought it 3 days ago. no problem then but now won't turn on. I keep getting a usb device not recognized (and i keep changing ports to no avail). what to do?

ipod 7th generation. bought it 3 days ago. no problem then but now won't turn on. I keep getting a usb device not recognized (and i keep changing ports to no avail). what to do?

wish i can rmber how mine was fixed i think i just waited tried again and likr magic it worked again left itunplugged, i was like you recently boughtand it happened to me, now i have another diffrent promblem with it.

Screen won't turn on after sleep for newest macbook pro (Feb 26 2011)

Hi!
I just bought the 13' Macbook Pro with an 2.7GHz dual-core i7 processor and 500GB of space, the $1500 model. I am having a problem with the screen and I am wondering if I should be worried about it or if anyone else has noticed it. If it continues, I will have to take it into the store and see if I can get it fixed.
My macbooks screen will not turn on after it falls asleep for a long period of time. The first night I had this computer, it was playing music and I turned the screen brightness all the way down/off and then I fell asleep. The energy settings were set so that the computer would fall asleep after 20 minutes. Pathfinder, F.lux and iTunes were the only application running at the time. When I woke up the next morning, the light on the computer's side indicating it was asleep was slowly fading in and out (as expected). I hit some keys on the keyboard and the keyboards backlighting turned on after a few seconds.
But the screen did not turn on. I tried adjusting the screen brightness on the keyboard and nothing happened. After a few minutes, I held down the power button and heard the computer turn off. I turned the computer back on, AND THE SCREEN LOOKED VERY STRANGE. I could see part of iTunes fragmented/segmented into 5 or 6 sections across the screen. There were also strange lines going across the screen. It looked kind of like a leftover image of iTunes that could be solved with a screen refresh. I turned off my computer again and turned it back on about two more times, and then the screen would simple just not turn on.
As I was packing up to go to the Apple Store, I tried one more time to turn my computer on and the screen was working fine. This was yesterday, and for the rest of the day the computer seemed to work fine. However, I don't think I let my computer fall asleep all day yesterday because I was using it so much.
Basically the same thing happened this morning when I woke up, except to a lesser degree. My computers screen was unresponsive after keyboard input, but I was able to get music to play from my speakers. I restarted it and it seems to be working fine. I didn't see the screen do that weird fragmentation thing this time.
I think something about the sleep function is interfering with my computer's screen. Or perhaps Pathfinder or F.lux have something to do with it. F.lux, by the way, is a application that turns the screen a dark yellowish at night to help your eyes. But I have friends that use this application and I myself have used it for a while and we have never had this problem. Then again, none of them have a 13 inch with an i7.
Does anyone know about this problem and have advice that would save me a trip to the Apple store?
thanks!

Bad news and good news. The bad news is that it happened again this morning. The good news is that I finally found something interesting in the console log, at the exact second my clock is stuck when the machine is failing to wake from sleep:
3/10/11 7:33:53 AM kernel WaitForStamp: Overflowed waiting for stamp 0x32b5d on Blit ring: called from wait for blt buffer (2D blt)
3/10/11 7:33:53 AM kernel timestamp = 0x32b5c
3/10/11 7:33:53 AM kernel ** Debug info for apparent hang in Blit graphics engine **
3/10/11 7:33:53 AM kernel ring head = 0x000013b0, wrap count = 0x 0
3/10/11 7:33:53 AM kernel ring tail = 0x00001f58 ring control = 0x00003401 enabled, auto report disabled, not waiting, semaphore is waiting, length = 0x004 4KB pages
3/10/11 7:33:53 AM kernel timestamps = 0x32b5c
3/10/11 7:33:53 AM kernel Semaphore register values:
3/10/11 7:33:53 AM kernel VRSYNC: (0x12044) = 0x0
3/10/11 7:33:53 AM kernel BRSYNC: (0x22040) = 0x0
3/10/11 7:33:53 AM kernel RVSYNC: (0x 2040) = 0x0
3/10/11 7:33:53 AM kernel BVSYNC: (0x22044) = 0x0
3/10/11 7:33:53 AM kernel RBSYNC: (0x 2044) = 0x0
3/10/11 7:33:53 AM kernel VBSYNC: (0x12040) = 0x0
3/10/11 7:33:53 AM kernel trying to clear semaphore wait on Blit ring
3/10/11 7:33:53 AM kernel After attempt to clear semaphor wait = 0x00003001 no longer waiting
3/10/11 7:33:53 AM kernel kIPEHR: 0x1800001
3/10/11 7:33:53 AM kernel kINSTDONE: 0xffffffff
3/10/11 7:33:53 AM kernel kINSTDONE_1: 0x3fffffff
From when the problem apparently starts (some point in the night while my machine is idle and supposedly asleep) until when I discover it and reboot the machine, I get dozens or hundreds of the above messages. Now somebody just needs to figure out what that means and stop it from happening...

What to do now when my iPad won't turn on after I turn it off. It shows only the apple logo. I am sure it has above 70% charge as when I sync my iPad it shows necessary detail in iTunes. I have tried, HOME & POWER button, but did not work.

What to do now when my iPad won't turn on after I turn it off. It shows only the apple logo. I am sure it has above 70% charge as when I sync my iPad it shows necessary detail in iTunes. I have tried, HOME & POWER button, but did not work.

First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
3: If Unable to Restore, try using the Steps in this article to force the device into Recovery Mode.
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
After you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

Iphone 5 got wet last week. Been in rice until today. It turned on and worked fine, I could see a water spot in the middle but still worked fine, 3 hours in it shut off to black screen with apple logo. Any ideas what to do?

Iphone 5 got wet last week. Been in rice until today. It turned on and worked fine, I could see a water spot in the middle but still worked fine, 3 hours in it shut down to the black screen with apple logo. Screen stays up for 10 seconds ago and then goes black and then black screen with apple logo comes back. Any ideas what to do?

At this point it's likely that the iPhone has suffered damage and you'll have to take or send it to Apple for replacement. If you have AppleCare+ coverage on the iPhone, the cost will be US $49. Otherwise the cost will be US $229.
Regards.

My N73 ME won't turn ON after I install PC Suite.

My Nokia N73 Music Edition won't turn ON after I update the version of my PC Suite from V 3.0638.0.0.30 to V 4.0727.2.2.1
can somebody help me with this I can no longer use my N73 ME now
and I don't what to do to resolve this problem and I need your help.
Personal Information RemovedMessage Edited by adisaily on 10-Sep-2007 06:30 AM

Hey! Don't mind.
First Off, you upgraded your phone, not PC Suit.
You most probably did it by using PC Suit (PC suit uses Nokia Software Updater) to upgrade it.
I suspect there was some fall out while downloadin or installin the updates.
Earlier I would advise people to go to nearest Nokia Care centre.
Now, the 3 fingers action might cure it well,though I'm not sure.
The method:
--The number 3---the * star----The green call key--- .
If the phone still cant turn on.
Then, if you have any warrenty and have a nokia care centre near you, make a trip to there.
They will cure it.

My one week ipad2 won't turn on after working fine all day, didn't fall or anything, just died quietly with a full battery, what can i do?

Similar Messages

Maybe you are looking for