My operating system is Windows XP SP3. I have Adobe 11.0.08 installed. I cannot print a pdf file/document. Error message - AeroRd32.exe - Unable To Locate Component - "Application failed to start because lxdautil.dll not found." Any suggestions?
My operating system is Windows XP SP3. I have Adobe 11.0.08 installed. I cannot print a pdf file/document. Error message - AeroRd32.exe - Unable To Locate Component - "Application failed to start because lxdautil.dll not found." Any suggestions?
That DLL is part of your printer driver; reinstall or update the device driver for your printer, and the message should go away.
Similar Messages
-
I updated my itunes the other day and now it won't open I get error message saying "application failed to start because MSVCR80 was not found" When I close that window I get message stating Itunes was not installed correctly Error 7 Windows error 126. My PC is a Acer and I'm running Windows Visa. I tried to uninstall Itunes and reinstall it and get same message. Can anyone help.
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99659) -
I installed the latest iTunes update from Apple on my PC. I then received an error when launching iTunes that I the "APSDAEMON.exe was unable to locate component. ...Failed to start because MSVCR80.dll was not found".
During install, I got a message that itunes install was complete nut then I got a message that "itunes not installed correctly. Error 7 (windows error 126). Another error message received was "service 'apple mobile device' failed to start. verify you have sufficient privileges to start system.services.
At this point, iTunes icon is on my desktop but cannot launch iTunes.
Need help!Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process. -
On starting windows xp I get an error message. "applesyncnotifier.exe unable to locate component". I have uninstalled and reinstalled ITunes. Are there any recommendations?
Dunno. I just got it too. And after reading all the info, I tried what they did..
I copied the file from one folder to another one, and then I got a DIFFERENT error.
All I know is the last time I ran an upgrade to apple products, I lost my entire library, AND my I pod.
So I have been avoiding updates.. I finally try one and again, the silly thing acts up.
If this is the quality of Apple software then Im going to stop updating at all. -
Windows XP: removed bonjour by accident in the add/remove program. Now, everytime i log on, i get an error message that reads.
APAgent.exe - Unable To Locate Component
This application has failed to start because dnssd.dll was not found. Re-installing the application may fix this problem.
Tried reloading my Airport Extreme CD, but no luck.
Googled this error & got nowhere. How can i get fix this annoying error message?Which Bonjour were you using, daniel? The Bonjour Print Services type, or the one that comes bundled with iTunes?
-
iTunes won't start. Get error message.
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I received an iTunes update today and updates files. Tonight, I couldn't acces my iTunes. I uninstalled and reinstalled and still getting same error message: iTunes exe unable to locate component. This application has failed to start because MSVCR80.DLL was not found. Reinstalling the application may fix this problem. I've done it several times and still get the error. I'm fearful I have lost all my music. What can I do?
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
Tecra M9 - TPSMain.exe cannot start because CpePerf.dll not found
Hi and help,
have searched the web and found other forum threads with similar issues.
Tried all the suggestions to no avail. I am not great on the computer but can find my way around. Anyway....
After login messge following messages pop up in succession, along the lines of : TPSMain.exe cannot start because CpePerf.dll not found then: TPSoddctl.exe cannot start because CpuPerf.dll not found
Computer works fine but Power Saver does not auto start and neither can i select it to from control panel.."toshiba power saver is not running",
so select it from Power options..."failed to start as CpuPerf.dll is not running"
Did all the searching on net and followed all advice... i.e. unistall power saver in safe mode, unistall toshiba common utilities neither can unistall fatal error 0x7e
So download Ccleaner, run checks, unistall with Ccleaner same fatal error.
Been on Toshiba support and tried to install Power Saver......same problem won't install .
So help help help if possible.
Computer is working fine but messages popping up are annoying and i would love power saver to prolong battery.
Tried system restore, though i doubt this affects the files...another problem "system restore could not complete"...tried this several times and cannot system restore either....what is going on???????
any help please
TimCheers for the advice Andrei,
so you suggest there is nothing i can do other than restore from Toshiba recovery disc. Do you think somebody with a bit more knowledge could do sort it out with a less drastic approach..i.e is it worth taking it into a shop? Or do you think they will just have to go down the same route?
If i follow your plan is it just a simple case of downloading all my docs, photos, bookmarks to an external hd and then inserting the recovery disc and following intructions.?? I guess this disc then formats the HD and then reinstalls all the components the laptop came with??? is it infact a drastic approach, or quite simple as a procedure...what do i stand to looose?
Also how do i save xp as this is a version i installed when working/ using my laptop for my previous employer and i no longer have access to the discs/product key.
also could you confirm if this procedure would sort out system restore. I have tried restoring again to several restore points and the procedure will not complete, so this function is definitely not working anymore.
Sorry for more questions but as you can see this is not familair territory for me!!
many many thanks
Tim -
I have just updated itunes on my pc (windows XP) to the latest version. When I try to open it I get an error message saying the application failed to start because MSVCR80.dll was not found< Have tried reinstalling with no luck. Any ideas?
try removing all itunes and all other apple program
follow this link for more info. http://support.apple.com/kb/HT1923
reboot ur window after uninstalling
after that download the latest itunes setup and install. -
My iTunes will not start. The box on the error message APSDaemon.exe, And message says "This application failed to start because MSVC80.dll was not found. Reinstalling may fix." I did the reinstall and I get the same error. The error first happened after I approved the an iTurns update.
Same problem today. Took five times to reinstall without any error messages. Apple has posted a way to fix and you should follow their's first. I finally got to upldate correctly by doing their fix but with one difference. I did the following:
1) Went to the C:\program files (x86)\iTunes and C:\program files\iTunes folders and moved every file ending in .dll to the desktop (even if two files in same location had the same name, just replace)
2) Restarted computer and still got error message
3) Uninstalled all apple programs possible in the following order......itunes, apples software update, apple mobile device support, bonjour, and apple application support.....all performed using the microsoft control panel
4) put all the .dll files on the desktop in the trash and emptied (this is a step apple support did not specifically put in their fix but for a final try I wanted to delete everything apple).
5) Restarted computer.
6) Re-installed itunes from apple website
No error messages during re-install and was able to open shortcut in one try. Even updated my ipad to make sure everything was working. -
When trying to launch ITunes I get an error message saying that application fail to start because MSVCR80.dll file not found. Reinstalling app may fix problem.
I've just (finally) managed to fix this problem today. I checked the Apple Support forums, and it seems a lot of people are having the same problem.
I rang the Apple Support line, and the very helpful man (thanks Alan!) talked me through it stage by stage. If you go to the following page on the internet: http://support.apple.com/kb/TS5376 it takes you through the process. WARNING - it takes a little time!
Basically, the first thing you have to do is go to your Program Files and double click on your iTunes folder. There'll be a number of files with the suffix .dll - you need to move all the .dll files from that folder to your desktop - you can simply click and drag them on the desktop..
Next, uninstall iTunes - go to Control Panel / Add/Rempve Programs and when the list comes up remove iTunes. This will take a few minutes... Then reboot your computer.
Next, go back to Control Panel / Add Remove and Remove - IN THIS ORDER -
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot again!
Next, check in your Program Files that the iTunes folder is completely gone - if it has, great: if it hasn't, right-click on the folder and press Shift and Delete - it will say "Are you sure you want to completely remove the folder "iTunes"? Click on "Yes".
Reboot!
Then go to the iTunes download page and voila! It should download iTunes without any problems... well it did for me.... Good luck! -
Hello,
Yesterday I tried to get onto iTunes and was unable to. I keep getting this message:
Itunes.exe - Unable to locate component.
This application has failed to start because MSVCR80.dll was not found.
Re-installing the application may fix this problem.
I have tried to uninstall and re-install the program several times but cannot get it to work. Now I get this message:
iTunes was not installed correctly. Please reinstall iTunes.
Error 7 (Windows error 126)
I have tried to do what I can but am not really iTunes savy and would like to get this issue resolved. Can anyone help me?
THANK YOU!!
CynHello there, Cyn.
The following Knowledge Base article provides some great information for troubleshooting your issue. Keep in mind uninstalling and reinstalling has to be done in a very specific fashion, therefore use the guidelines from this article to accomplish this:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
I already had itunes installed on my pc. I received an update and tried to install it. I got a message
This application failed to start because MSVCR80.dll was not found. Reinstalling may fix the problem.
I uninstalled itunes and tried to reinstall. itunes says it has installed but when I try to open itunes I get the same message.
How do I repair/sort out this error/fault
Thanks
DavidTry the following user tip:
Troubleshooting issues with iTunes for Windows updates -
After the last update iTunes no longer works... "This application failed to start because MSVCF80.dll was not found. Re-installing the application may fix this problem" I tried and it did not fix the problem?
Click here and follow the instructions.
(99061) -
Error Message "ElementsAutoAnalyzer.exe unable to locate. This application failed to start because ExtendedScript.dll was not found".
This error message is seen every time when first starting Windows Vista, PRIOR to starting Photoshop Elements 12.1
It does not seem to interfere with the normal operation of Photoshop Elements, but it is a constant annoyance.try removing all itunes and all other apple program
follow this link for more info. http://support.apple.com/kb/HT1923
reboot ur window after uninstalling
after that download the latest itunes setup and install.
Maybe you are looking for
-
Opening .doc files after Maverick 10.9.2 update
My 08 Imac will not open any .doc files either attached to emails or in Documents after installing the latest OSX update Maverick 10.9.2. By saving file, I can open with the "Quick Look" icon but double clicking in any location will not do the job.
-
Greetings all. I have a contact management database for different departments. As it stand right now, I have a list for each department, and when you click on a department it takes you to a webpage that populates with information pertaining to the se
-
Won't recognize all my external drives.
Couple of years ago I built my pc with lots of help form this forum. One little issue I have always dealt with was my WD My Book external drives. I'm using a GA-X58A-UD3R MOBO, i7 950 cpu. My hard drives show up like this... Hard Disk Drives (7) Loca
-
This happened today - yesterday I had a 'normal screen' showing bookmarks and my e-mail address for direct access. Now I cannot get into gmail. All I have is a ALOT screen which I do not want. Please clear this up. But reply to [email protected] NOT
-
Hi, I have designed one aplication in which we have initial screen having some input fields. Based on this input values, I want to disable / remove one step from the nagivation area. Is there any way to achieve this? Thanks & Regards, -Haresh