My outbound messages are not processing in XI

Hi All,
When i try to test my scenario i.e sending message from SRM to MDM , all my messages are struck in the Queue in XI. Even i deleted queues in SMQ2 , my messages are not processing and in sceduled for outbound processing stage. Even i restard also its on pending status. Please help me How to process my messages which is pending in XI.
Thanks in advance
Regards,
KK

Hi..
go to sxmb_moni->monitor processed messages
select ur message.. scroll towards right..
click on ur message queue ID.
check if there is any errored out message in that queue.
if yes .. delete that message,
and release the queue by unlocking that.
Regards
Pushkar

Similar Messages

Why some messages are not processing

Hi All,
I have scene in AQ table some of the messages are in PROCESSED status
and some of the messages in UNDELIVERABLE status.
This is the data in the AQ table for undelivarable messages.
MSG_STATE          RETRY_COUNT    EXPIRATION_REASON
UNDELIVERABLE         -1                   PROPAGATION_FAILURE
UNDELIVERABLE         -1         Messages to be cleaned up later
Why some of the messages were processed and some of the messages were undelivarable.
What are the reasons and how to solve this issue.
Please help me.
Thanks.

In some situations that indicate application errors in queue-to-dblink propagations, Oracle Streams AQ marks messages as UNDELIVERABLE and logs a message in alert.log.
Examples of such errors are :
* when the remote queue does not exist
or
*when there is a type mismatch between the source queue and the remote queue.
The trace files in the background_dump_dest directory can provide additional information about the error.
Refer:
http://docs.oracle.com/cd/B19306_01/server.102/b14257/aq_intro.htm

Cisco 5.0 "Your messages are not available now" after exchange 2010 and DC migration to a new host

Guys,
First of all, thanks for looking at this post. Hopefully you guys can help me out. My unity users, when dialing into voicemail are getting the message "Your messages are not available now".
Services in error state under the event viewer:
Event Type:   Error
Event Source:   CSAgent
Event Category:   Kernel Rule
Event ID:   256
Date:       7/29/2014
Time:       11:42:41 AM
User:       N/A
Computer:   UNITY
Description:
A packet with a bad transport layer header was detected. Reason: Illegal TCP reserved flags set using interface Wired\HP NC324i PCIe Dual Port Gigabit Server Adapter. TCP: 00.000.00.000/443->00.00.0.00/1241, flags 0x10. The operation was denied.
Event Type:   Error
Event Source:   CiscoUnity_MALEx
Event Category:   Error
Event ID:   30012
Date:       7/29/2014
Time:       11:44:27 AM
User:       N/A
Computer:   UNITY
Description:
An occurred which prevents successful Exchange access by CsBMsgConnector via MAPI.
This is typically an indication of configuration issues with Unity, Exchange, or the MAPI subsystem.
Verify that the Unity services accounts are granted the correct permissions and that there are no issues with installation. The SysCheck utility may assist in diagnosing the problem.
Event Type:   Error
Event Source:   CiscoUnity_Doh
Event Category:   Error
Event ID:   32013
Date:       7/29/2014
Time:       11:44:27 AM
User:       N/A
Computer:   UNITY
Description:
Doh logon failed due to messaging component logon error: 8004052eH
I found and followed to the letter:
http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unity/107323-unity-error.html
I also went ahead and ran GUSI with some mixed results under environment information:
SQL Version = Microsoft SQL Server 2000 - 8.00.2282: unknown SP
SQL Edition = Desktop Engine
Windows version = 5.2 Build 3790: Service Pack 2
Outlook is not installed on the local server
MAPI Provider : CDO Version - 6.5.8211.0
MAPI Shared Memory: (HKLM:SOFTWARE\Microsoft\Windows Messaging Subsystem\Applications\<process>\SharedMemMaxSize)
AvCsMgr : is set to recommended value
AvMsgStoreMonitorSvr : RegKey not found. Recommend add the key AvMsgStoreMonitorSvr and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
AvNotifierMgr : RegKey not found. Recommend add the key AvNotifierMgr and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
AvUMRSyncSvr : is set to recommended value
CsBMsgConnector : RegKey not found. Recommend add the key CsBMsgConnector and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
CsBridgeConnector : RegKey not found. Recommend add the key CsBridgeConnector and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
CsVpimConnector : RegKey not found. Recommend add the key CsVpimConnector and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
TCPChimney : Disabled
RSS : Disabled
*Pulled from UnityDB Configuration Table*
ExcludeAllReceipts : 0
ExcludeReturnReceipts : 0
DisableSearchFolderUse : 0
MinSearchFolderLifeHours : 1
OptimizeSearchFolderUse : 0
I tried following and deleting the Unity System Profile:
https://supportforums.cisco.com/discussion/11249996/unity-501-exchange-2010-unable-logon-mapi-mailbox
But I am still scratching my head. Any direction will be appreciated.

Turns out that unity came back after all this. Maybe it just needed time. I think I answered my own question. Anyways, this post could serve for future reference.

Mail 3, smtp, IMAP: sent messages are not saved on server

Hello,
I had problems using Mail 3 after I upgraded to Leopard, so I used Thunderbird for the time being. With the update 10.5.1 I tried again: most problems solved BUT: sent messages are not saved on the server in mailbox "Sent".
Some background: I deleted the folder "<User>/Library/Mail" and "<User>/Library/Preferences/com.apple.mail.plist" and configured Mail from scratch.
To be sure: I still have Thunderbird installed, and when I send with Thunderbird: a copy is placed in "Sent".
Another thing I noticed: it takes more than a minute to send from Mail 3 and a few seconds when I send from Thunderbird. I have another Macbook Pro with 10.5.0 installed: same problem with sending.
Any help is appreciated.
rene

Well, be stumped I did all that, but to be sure, I did it again:
I have a lot folders with subfolders and they are shown under my account name.
I created a new folder "test" in my IMAP account and designated it to be the new "Sent" folder. It replaces my previous Sent folder in the group Inbox, Drafts, Trash. My previous Sent folder now appears under my account name as a "normal" folder.
I send a message and the Activity monitor says: +"Delivering message: copying message"+. After a minute Mail is done. I check my (new) "Sent" folder and it's empty. I double check in webmail: it's empty.
So I go to the Finder and look in my IMAP folder: <user>/Library/Mail/<IMAP-account>/test.imapmbox and there is no folder "Messages", only Info.plist.
Then I try to move a message to the "Sent' folder: for a minute the Activity moinor says: Copying messages: copying message" and then Mail prompts: +"The message "testing" could not be+
+The connection to the server mail.hicetnunc.nl on port 143 timed out"+.
So it looks like Mail has a problem with the default "Sent" folder: it cannot copy messages to that folder at all! Aha!
But then I try to move a message to a "normal" IMAP folder: same thing! Mail cannot copy to any folder!
In both instances Mail says: +"The message "..." could not be be moved to the mailbox "..."+
+The connection to the server mail.hicetnunc.nl on port 143 timed out"+
Last thing: I try to move a message to a folder in the same account again. But in the process I quit Mail. I open Mail again and Mail is performing pending operations: copying message. After a while Mail prompts: +"Operation could not be completed. (MFMessageErrorDomain error 1028.)"+ and crashes... I open Mail again and it tries to peform pending operations. Again: an error message and Mail crashes. This keeps going on so I delete the whole account and set it up again. Nothing's changed...
I can receive and send, but sent messages are not copied to the "Sent" folder and I cannot move messages around within a IMAP account. But TADA!!!: I can move messages from account to account.

Messages are not displaying in SXMB_MONI in R/3 system

Hi,
      my scenario is File -to Proxy (Inbound Proxy).. scenario is working fine... but those processed messages are not displyed in the SXMB_MONI screen in the R/3 System... .. but i wnat to see the messages in the R/3 system.. for this..any configuration is needed.. please suggest me..
Regards
Jain

Thanks Aswin and Praveen,
      Finally I got the messages in SXMB_MONI in R/3 system... for that I added one more paramater additionally along with the parameters are suggested by Mr.Praveen .. ..
any ways.. these are the parameters I added in the SXMB_ADM   for your reference..
category :RUNTIME parameter:Logging value :1
category :RUNTIME parameter:Logging_sync value :1
category :RUNTIME parameter:Trace_level value :1
category :RUNTIME parameter:Logging_propagation value :1
keep sharing the knowledge...
Thanks
Jain

Queues are not processed properly in BPM

Hi all ,
In BPM , the inbound queues of the process engine are not processed properly.
Several message are sent to the process and the message queued in the QRFC queue.
How to process those messages so that process instance gets created ?
Kind regards
Goutam

Check steps I've detailed on this thread:
Re: problem in triggering BPM engine
Hope that helps
James.

Messages are not moving to Error Queue in OSB if Error is Raised

Hi All,
My OSB process is as below.
Queue1-->OSB-->Queue2.
OSB Proxy is listening to the Queue1.When messages comes to Queue1 Proxy will pick the message and after applying the business logic it will put the message to Queue2.
If OSB is not able to deliver the message succesfully to Queue2 then it should retry for 2 times.If retry exhausted then the message should move to the error Queue.
I have configured Queue 1 with delivery failure paramaters redelivery limit and redelivery delay.Also the Connection factory is XA enabled.Even if any error happens (i am not using reply activity in the error handler) its retrying infinitely and messages are not coming to the error Queue.If i use reply activity its not retrying its failing at first time and the message is moved out of the main Queue1.
Can any one please help me on this?
Thanks.
Edited by: 892479 on Dec 21, 2011 6:31 AM

Since the messages are getting retried, it means that messages are getting rolled back to Queue1 when any errors happen. So transactional behavior is configured correctly.
Now the problem yu face is that the messages are not moving to error queue.
Make sure that you have configured following in the delivery failure tab of the queue>
Redelivery Delay Override - delay in miliseconds between retries
Redelivery Limit - number of retries
Expiration Policy - Redirect
Error Destination - Choose the error queue here
After that make sure that the Server is restarted, even though a server restart sign is not mentioned on the config page, some of these settings might not take effect without a restart.

Messages are getitng processed

Hi
I can see that messages are getitng processed in Adapter Monitoring and I getitng following message:
Sender Adapter v2126 for Party '', Service 'LegacySender_BS':
Configured at 2005-10-31 09:12:50 GMT
History:
- 2005-11-01 02:49:50 GMT: Polling interval started. Length: 60.000 s
- 2005-11-01 02:49:50 GMT: Processing finished successfully
- 2005-11-01 02:49:50 GMT: Processing started
- 2005-11-01 02:48:50 GMT: Polling interval started. Length: 60.000 s
- 2005-11-01 02:48:50 GMT: Processing finished successfully
But When I got to SXMB_MONI then I don't see any of the message. Can anyone tell what can be the reason for the same.
Regards
Ria

I checked there is no message in adapter monitoring also. But still it give message in front of channel comminication that processing startedd and finished successfully.
I am not understanding what cna be the issue why no message are getitng generated.
Can anyone please help me out.

HL7 Messages are not transforming.

Hi,
My composite is picking HL7 message from file adapter and i want to insert some of few elements in database. After transformation null values goes in database. If i give hard code values like current date, then it get inserted properly in database. I tested mediator transformation values by using test button in mediator transformation , that time it showing all the values properly.
Composite flow is like this,
(Picking HL7 ADT_28 Messages)File Adapter------------->Mediator--------------->Database Adapter
Thanks,
Shrikant.

HI,
Whenever we set the sender communication channel as FTP/NFS and Quality of Service as Exctactly Once in Order , such
mesasges will process through the Adapter engineEOIO sequence monitoring tool.
Sometimes, the status of the messages in the message monitoring of the adapter framework is Holding status.
To clear the holding status messages from Adapter engine we need to follow the step by step procedure as mentioned below.
Step 1.
http://hostname:port/MessagingSystem --->click on EOIO Sequence monitor.
If messages are stuck then you can see HOLD and NDLV status.
HOLD reprasents holding the messages in adapter engine in EOIO queue.
NDLV reprasents the messages not delivered to Integration Server.
To clear these messages click on the message key number.
Step 2:
Click on the redeliver button and see the status. If messages still not process then we need to cancel the failed message by clicking on Delete option.
refer the below links
http://www.saptechies.com/how-to-deal-with-stuck-eoio-messages-in-the-xi-30-adapter-framework/
thanks and regards,
kesava.

Error messages are not posted into ECH using collect method

In asynchronous interface, Error messages are not posted into tcode:ECH_MONI_SEL using collect method.
In the collect method, passing software component version,business process and error messages.but its not posted into ech and ppo.

Hi,
Have you created the FEH class for the proxy. In that, from within the PROCESS method, when there is an error you will be placing those errors into a table and this needs to be passed to the COLLECT method.
CALL METHOD i_ref_registration->collect
   EXPORTING
     i_single_bo      = input
     i_component      = 'ZSWC'   "Software component defined while FEH customisation
     i_process        = 'ECH_BP' "ECH Business process defined while FEH customisation
     i_error_category = lc_errcat
     i_main_message   = wa_error
     i_messages       = lt_error
     i_main_object    = wa_object.
Here while populating the wa_object, the objtype field should be populated with the object type defined while FEH customization.
If all these things are done, then this should post the error.
Regards,
Abijith

Sent Messages are not saved in Sent Mailbox

It was working correctly but suddenly all my sent messages are not saved in the Sent Mailbox. I follow all the Mail Help instructions but nothing seems to work. Hope that someone can help me. I asked for help on december 14 but it was not helpful

The mailboxes drawer contains all mailboxes under In, Drafts, Sent, Trash and Junk (if you have Junk Mail set to automatic).
If you have a .Mac or IMAP type account, you also have an account named icon for the .Mac or IMAP type account at the bottom of the mailboxes drawer. It is named by the Account Description you provided/entered for the account under the Account Information tab for the account preferences.
If you select save Sent messages on the server for a .Mac or IMAP type account, the account's Sent mailbox will be available under the account named icon in the mailboxes drawer along with all other server stored mailboxes.
To open the account named icon for your .Mac account to reveal the server stored mailboxes including the account's Sent mailbox, select the black triangle beside your .Mac account icon in the mailboxes drawer pointing it down.
Select the account's Sent mailbox and at the menu bar, go to Mailbox > Use This Mailbox For and select Sent.
If you deselect store Sent messages on the server for the account preferences, the account's Sent mailbox will be available under Sent in the mailboxes drawer and you can't use "Use This Mailbox For" for mailboxes stored locally on the hard drive. It can only be used for .Mac or IMAP type account mailboxes that are stored on the server.

PL/SQL log messages are not printing from Java concurrent program

Hi,
I have a strange issue while submitting the Java concurrent program through PL/SQL.
I have a PL/SQL concurrent program which will invoke the Java concurrent program inside the package by use of "FND_GLOBAL.SUBMIT_REQUEST". It worked and submitted successfully. From that Java concurrent program we are calling some other PL/SQL packages and printing some log messages over there. But problem here is the request is only printing the Java log messages in view log but not the PL/SQL log messages. But if I submit the Java concurrent program directly from SRS form at that it is printing both Java and PL/SQL log messages.
I am just wondering how the log messages has not printed. Please provide your inputs to solve this problem.
Thanks
Suriya

I'm adding log messages in the package body , but these messages are not printing after completion of concurrent prog.
Any suggestions.
FND_FILE.PUT_LINE(FND_FILE.LOG,'Data Test :');Do you have COMMIT in your code?
https://forums.oracle.com/forums/search.jspa?threadID=&q=%27FND_FILE.PUT_LINE%27+AND+commit&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Messages are not being saved on N96

On my N96 I have set save sent messages and receive report as 'yes' but after updating firmware (20.050) messages are not being saved.Is there any solution to someone.

I have exactly the same problem with my N95 but I can't really say when it started. Suddenly I just noticed my phone didn't save sent messages anymore and hadn't done it for some time, but can't really tell after what it started to occur. Really strange problem, not even reseting back to factory settings helped - after I put "receive report" option back it stops saving sent messages to sent folder. Actually if I go to "sent" folder quickly after sending the sms, it shows there for little moment before disappears. Really strange. I couldn't google any other information about this problem than this topic.

I just switched from Outlook to Mail and now the sent messages are not being displayed. Help, please.

I just switched from Outlook to Mail and now the sent messages are not being displayed. Help, please.

Back up all data. Rebuild the mailbox.

My sent messages are not displayed...what happened and how do I restore?

My sent messages are not displayed...what happened and how do I restore?

http://kb.mozillazine.org/Disappearing_mail

My outbound messages are not processing in XI

Similar Messages

Maybe you are looking for