My phone is stuck on the apple and itunes give me a code 1654
my iphone is stuck on the apple and itunes give me a code 1654 what do i do ?????
I've had this problem with certain USB ports, try another pc if you can, or keep trying, I have had times where running the restore several times and finally it will work. Let me know ok?
Similar Messages
-
i hit the clear setting and content on my phone and now my phone is stuck on the apple sign and wont turn on or off
You will probably have to put it in recovery mode to restore it, as explained in this guide: http://support.apple.com/kb/ht1808.
-
My phone is stuck on the apple and my home button doesn't work. How do i fix it?
HELP,it's my phone and i need to be able to go on it.i have a problem with a family member.
Have you tried holding them down for at least 10 seconds?
If it doesn't work, connect your iPhone to your computer, and in iTunes, choose to go back to manufacturer settings. Just remember to have a backup of your iPhone, if you choose to do the latter. -
My cord failed during sync to an update and now my phone is stuck on the apple symbol but there is a empty bar under it. I tried to turn off the phone but that didn't work and the iTunes onn my computer isn't picking up the device at all. Whats wrong? How do I fix it?
My cord failed during sync to an update and now my phone is stuck on the apple symbol but there is a empty bar under it. I tried to turn off the phone but that didn't work and the iTunes onn my computer isn't picking up the device at all. Whats wrong? How do I fix it?
-
started the newest update for my phone but when it started installing it to the phone, a error message showed up and now my phone is stuck in recovery mode and itunes wont recognize it. what do i do?
Any numbers or other details on the mesages given?
Did you try to connect in recovery mode again? iOS: Unable to update or restore
In case your network connection timed out, check your security software settings: iTunes for Windows: Troubleshooting security software issues -
My phone is stuck on the connect to itunes screen when i started to update it and when i connect it to itunes nothing happens. What do i do to fix it ?
Hold down the Home and Power button to shut off the iPhone. Keep it disconnected from the computer. Then, hold down the Home for 20 seconds. Connect it to the computer while continuing to hold down the Home button. Wait for iTunes to say your iPhone is in Recovery mode. Then, restore.
-
HT4623 my phone is stuck on the apple icon :( how to start it up? pleaaase help
my phone is stuck on the apple icon how to start it up? pleaaase help
it happened after i tryed to update the software
how to fix this???
plz helpyes it was jailbroken
now after i restored it from itunes i'm having an other problem
theres a message saying '' activation request could not be completed -
I attempted to update to iOS 8 and now my phone is stuck in recovery mode, and iTunes will only let me restore to factory settings. My question: Can I restore from iTunes backup after restoring to factory settings?
Hi, kformagg
I would say yes. I once had the same problem (iPhone 5, IOS 7) and first restored to factory settings and after that from iCloud backup.
It worked very well. -
I just got my a new iphone 4 from O2. i plugged in my phone to my computer(windows 7). itunes doesnt open automatically. when i opened the itunes,its still not detecting my phone. on the phone it only shows the cable and itunes logo. please help
Did you try to remove all Apple related software and reinstall iTunes again? Removing iTunes, QuickTime, and other software components for Windows Vista and 7
-
my phone is stuck on the connect to itunes screen after trying to recover it to a backup.what should i do???
PLEASE HELP!!!Hold down the Home and Power button to shut off the iPhone. Keep it disconnected from the computer. Then, hold down the Home for 20 seconds. Connect it to the computer while continuing to hold down the Home button. Wait for iTunes to say your iPhone is in Recovery mode. Then, restore.
-
What should i do if my iPod is stuck on the apple and doesn't need a update
My iPod all of a sudden blacked out now it's stuck on the apple sign, i tried plugging it in to iTunes but it says it does'nt need an update. What should i do to fix it?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Stuck with the apple and the scrolling gear while booting
Hi there
i am using my mac for more than 2 years , i did not format it or even fix any thing into it but now something bad happend...
accdentaly my genius friend preesed the power putton for more than 5 seconds to start up the computer and i heared a sound and a the normal flashing light under the track pad and suddenly i was stuck with the apple gray booting screen and the scrooling gear and the computer does not go further .. i left for 2 hours and it still stuck with the same screen ... try to restart do any thing no results also ...
NOTE: THE BIG PROPLEM IS THAT I PUT A PASSWORD FOR THE FRIMWARE AND I FORGOOT IT SO I CAN NOT USE THE FOLLWOING:
1-the ability to use the "C" key to start up from an optical disc.
2-the ability to use the "N" key to start up from a NetBoot server.
3-the ability to use the "T" key to start up in Target Disk Mode (on computers that offer this feature).
4-Diagnostic volume of the Install DVD.
5-mode by pressing the Command-S key combination during startup.
6- a reset of Parameter RAM (PRAM) by pressing the Command-Option-P-R key combination during startup.
Requires the password to use the Startup Manager, accessed by pressing the Option key during startup (see below).
7- Safe mood.
8-Single mode acsses and the other one i forrgot its name.
SO I FIGURED THERE IS NO WAY BETER THAN THE PRIVIOUS WAYS TO SOLVE THE PROPLEM
IF YOU HAVE ANY IDEAS OR ANY THING SO I CAN FIX THIS THING ?
Thanks in advance >>>
iBook G4 Mid 2005 Mac OS X (10.4.8)I was mistaken about the PMU..with a little more digging I found that Open Firmware password can be removed if you change the amount of memory installed.
I found this info here: http://archive.macosxlabs.org/documentation/firmwaresecurity/faqs/faqs.html#remove_passwordprotection
The following is a link from Apple's site to download the user's manual for your iBook:
http://manuals.info.apple.com/en/iBookG4(Mid2005)_UsersGuide.pdf
It provides the instructions to add or remove memory from the machine. If you do have additional memory installed then you'll be able to remove the memory, and reset the PRAM, that way your password is gone. Hopefully from there we can figure out and fix your startup issue.
Ben -
Stuck with the Apple and nothing else
It seems many are having problems with the recent software update. Me too - can anyone help?
Following the update I am now stuck with the Apple sign. When I do a restore (Menu/Play) the apple sign dissaperars, then comes back and I am back where I started.
My computer no longer recognises my iPod either!
Any ideas?The most likely solution, Angel, is to restore your iPod then re-sync with iTunes to load your songs on. See this:
Restoring iPod to Factory Settings -
I attempted to update my iPhone 4 without realizing that I need to sync it with my laptop. My iPhone 4 is now stuck in the connect to iTunes mode and now I cannot use it. Is there a way to reverse this so I can use my phone because I do not have my computer with me?
Maybe it was hacked before and now through the update it's locked back to the original carrier.
-
please help me!!
I have an iPhone 5, just updated software as per itunes notice. the phone is now stuck in the "connect to itunes" mode on the phone, therefore not even started up completly.#
I am going on holiday in 4 hours and need this ............ thanks iphone for screwing it up again
Maybe you are looking for
-
How to generate an excel spreadsheet from an Oracle Application forms runni
I need URGENT generate an Excel spreadsheet with rows and columns populated from a forms that is running on Oracle Application R11.5 and open this worksheet for the User save. I want to include a PL*SQL code on a button and this button to run the spr
-
Hi All, We are getting below error in doing testing in PI mapping.We are calling a RFC function module in PI. Cannot perform RFC lookup com.sap.aii.mapping.api.StreamTransformationException: Cannot perform RFC lookup at com.sap.aii.mappingtool.flib7.
-
Document(object, node-set)
Using xsql 1.0.4.1, I'm having some trouble using the document(object, node-set) function defined in the XSLT 1.0 recommendation, sect 12.1: http://www.w3.org/TR/xslt#function-document I have a tag in my source xml document which contains a reference
-
Set up FileMaker DSN is Cold Fusion administrator
I am trying to set up a dsn to filemaker pro 11 database in the cf administrator. I am at the Datasources > Other screen and there are questions there that I know I dont have answered correctly. Here is the error message I get. "No suitable driver av
-
Hi! I have to create a new report, i was advised to use SQVI but here i can use only one table and even my report is simple i need more data. I need a result of list of batches in the warehouse, not yet picked, what means that they can be already ass