My photos are not printing right with adobe manages color but works when i use printer manages color. never had any issues untill a week ago.

my photos are not printing right with adobe manages color but works when i use printer manages color. never had any issues untill a week ago.

We use CS6, yes we calibrate using x-rite. I have always had adobe manage colors when printing. This problem just occurred, all my settings are the same as they have been for years. The only thing we did lately is do an update to CS6. We thought it might be our printer but when we use the printer manages color it works fine, The problem with adobe manages color is it is not blending the light highlights like on top of the cheeks with the colors around the cheeks and its putting a faint red between the two it just does not have a smooth transition. I printed a photo that I had printed 4 months ago with no issue, and this time it had the issue that I am dealing with now. Somehow the photo shop manages color is not getting the right info to my printer.
I set paper type
set quality
no color adjustment
set my profile
Teri

Similar Messages

HT1338 I have a new MacBook. Pro and never had any issues until yesterday. I can not get it to complete its cycle to. Turn on, where I can log in like normal. I read the reboot in the little manual, but nothing. Please help!!!!!

I have a new MacBook. Pro and never had any issues until yesterday. I can not get it to complete its cycle to. Turn on, where I can log in like normal. I read the reboot in the little manual, but nothing. Please help!!!!!

So what happens when you boot it up? What do you get?

My 3GS will not charge. I have tried it from my computer and from a wall socket. I also have tried another computer and a different cable with no luck. My computer doesnt see the device either. I havent had any issues until now. Any ideas?

My 3GS will not charge. I have tried it from my computer and from a wall socket. I also have tried another computer and a different cable with no luck. My computer doesnt see the device either. I havent had any issues until now. Any ideas?

bring it to Apple for battery diagnostics.

HT4623 My computer is not taking the new update from itunes. It states that i do not have the requirements to finish the Install and that it was Installed incorrectly. I have never had any issue with any previous update regarding iTunes. What is the issue

My computer is not taking the new update from itunes. It states that i do not have the requirements to finish the Install and that it was Installed incorrectly. I have never had any issue with any previous update regarding iTunes. What is the issue?

Hi there Double2D,
You may find the troubleshooting steps in the article below helpful.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
-Griff W.

Since upgrading to Yosemite on my iMac, My Mail app refuses to open, Safari won't load, and I can't upload pictures from my iPad... Please help, any ideas very welcome. I've had my iMac since 2011, and have never had any issues to deal with before..

Since upgrading to Yosemite on my iMac: My Mail app refuses to open, Safari won't load, and I can't upload pictures from my iPad...
Please help, any ideas very welcome. I've had my iMac since 2011, and have never had any issues to deal with before..
Thanks

29/11/2014 20:17:01.315 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 11 seconds. Pushing respawn out by 49 seconds.
29/11/2014 20:17:37.013 com.apple.backupd[616]: Finished scan
29/11/2014 20:17:43.108 com.apple.backupd[616]: Saved event cache at
/Volumes/Time Machine Backups/Backups.backupdb/Geoff Lambrechts’s iMac
(2)/2014-11-29-200648.inProgress/9B453663-603F-40B8-AC21-24F05C724E15/.6162AD34- 38F8-30AB-98E0-4A22FB9D311F.eventdb
29/11/2014 20:17:43.207 com.apple.backupd[616]: Not using file event
preflight for Macintosh HD
29/11/2014 20:18:01.561 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 11 seconds. Pushing respawn out by 49 seconds.
29/11/2014 20:18:16.288 com.apple.xpc.launchd[1]:
(com.apple.quicklook[715]) Endpoint has been activated through legacy
launch(3) APIs. Please switch to XPC or bootstrap_check_in():
com.apple.quicklook
29/11/2014 20:18:23.705 com.apple.SecurityServer[56]: Session 100013 created
29/11/2014 20:18:32.046 mdworker[718]: code validation failed in the
process of getting signing information: Error Domain=NSOSStatusErrorDomain
Code=-67062 "The operation couldn’t be completed. (OSStatus error -67062.)"
29/11/2014 20:19:01.662 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 11 seconds. Pushing respawn out by 49 seconds.
29/11/2014 20:19:45.458 com.apple.xpc.launchd[1]:
(com.apple.imfoundation.IMRemoteURLConnectionAgent) The
_DirtyJetsamMemoryLimit key is not available on this platform.
29/11/2014 20:19:59.123 com.apple.xpc.launchd[1]:
(com.apple.PubSub.Agent[725]) Endpoint has been activated through legacy
launch(3) APIs. Please switch to XPC or bootstrap_check_in():
com.apple.pubsub.ipc
29/11/2014 20:19:59.123 com.apple.xpc.launchd[1]:
(com.apple.PubSub.Agent[725]) Endpoint has been activated through legacy
launch(3) APIs. Please switch to XPC or bootstrap_check_in():
com.apple.pubsub.notification
29/11/2014 20:20:01.138 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:21:01.484 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:21:13.430 com.apple.backupd[616]: Found 4529 files (1.1 GB)
needing backup
29/11/2014 20:21:18.786 com.apple.backupd[616]: 2.82 GB required (including
padding), 1.24 TB available
29/11/2014 20:21:31.775 Console[734]: Failed to connect (_consoleX) outlet
from (NSApplication) to (ConsoleX): missing setter or instance variable
29/11/2014 20:21:34.230 WindowServer[162]: disable_update_timeout: UI
updates were forcibly disabled by application "Console" for over 1.00
seconds. Server has re-enabled them.
29/11/2014 20:21:36.898 WindowServer[162]: common_reenable_update: UI
updates were finally reenabled by application "Console" after 3.67 seconds
(server forcibly re-enabled them after 1.00 seconds)
29/11/2014 20:21:36.971 coreservicesd[83]: SFLEntryBase::ListHasChanged
mach_msg returned 10000004d
29/11/2014 20:22:01.817 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:23:02.170 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:24:02.547 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:25:02.168 CalendarAgent[218]:
[Refusing to parse response
to PROPPATCH because of content-type: .]
29/11/2014 20:25:02.233 CalendarAgent[218]:
[Refusing to parse response
to PROPPATCH because of content-type: .]
29/11/2014 20:25:02.236 CalendarAgent[218]:
[Refusing to parse response
to PROPPATCH because of content-type: .]
29/11/2014 20:25:02.284 CalendarAgent[218]:
[Refusing to parse response
to PROPPATCH because of content-type: .]
29/11/2014 20:25:03.059 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:25:12.674 com.apple.xpc.launchd[1]:
(com.apple.imfoundation.IMRemoteURLConnectionAgent) The
_DirtyJetsamMemoryLimit key is not available on this platform.
29/11/2014 20:26:03.464 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:27:03.841 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
On 29 November 2014 at 19:29, Apple Support Communities Updates <

I am trying to use a Logitech USB headset to record with screencast o matic. In the sound file of system preferences the headset is recording audio. However it stops working when I use screen cast o matic. Any advice?

I am trying to use a Logitech USB headset to record with screencast o matic. In the sound file of system preferences the headset is recording audio. However it stops working when I use screen cast o matic. Any advice?

See these threads for some possible solutions:
Bluetooth and 10.7
Bluetooth speaker error

TS1398 Ever since the last update, my IPad does not automatically get connected to our WiFi. Never had any problems until this last update. Is there any repair?? Its going on 2 years old and does not use the

If I go into settings and physically touch the WiFi that has been used since his was new than after waiting for 2 to 3 min it finally goes on line. I never had any problems until this last update. It always went on line automatically with out having to go into settings. Just a pain. Once I do this it usually stays on line.

Tap Settings > General > Reset > Reset Network Settings
You will have to re enter your Wi-Fi password.
If that didn't help, try here > iOS: Troubleshooting Wi-Fi networks and connections

After I import from my camera, my pictures are not showing up in my events. But I can find them in Last 12 months. Any ideas why??

After I import my pictures to iphoto, I can't see them in my events. I can find them in last import or last 12 months. Why did my pictures stop showing up in events???

They have not - your events are sorted manually - go to the view menu ==> sort events and select your choice of event sort order
LN

I have downloaded the latest software 7.02 for my iPad and I am finding an issue with the battery now being drained rapidly even when not in use. I have never had this issue before I downloaded this software. Help

This software is killing the battery life. Anyone find a way to solved this issue with their iPads? If not, is there a way to go back to the last software, this is not acceptable.

I have no issue since upgrade to IOS 7 no loss of battery life and you cant downgrade,apple dont support it

I have an iPad 2 and today it would not turn on. It had an 80% charge and won't respond even to being plugged into a mac. It has never had any issues at all before 3:15 this afternoon. Please help.

Please help me fix my iPad. I need it tonight to finish multiple projects and I can't finish any of them without it. Please help.

press and hold the home and power buttons until the Apple icon is displayed, then let go.

Problem printing patterns with Adobe Reader 9

Hello all
We have a mix environment of Windows 7/Vista with Adobe Reader 9.2 and Windows XP/2k with Adobe Reader 8.1.7. Documents including charts with patterns created with the option Save as PDF from Word 2007(SP2) look and print fine with Adobe Reader 8, but the same documents look and print the patterns a lot more compressed with Adobe Reader 9. All computers print to the same printers with the same print drivers (a windows print server). Attached is a sample PDF file. I've installed Adobe Reader 9.2 also on Win2k and WinXP computers with the same results, so the problem doesn't come from the OS.
Any idea on what's wrong with Adobe Reader 9? Is it a configuration problem or defaults changed in Adobe Reader 9?
Thanks in advance.

You need to use Adobe Acrobat; Adobe Reader does not support editing.
-vaibhav

My phone photos are not uploaded automatically to my PC

I am using an iPhone 5 and an iPad Air both running on IOS 8.1. The iCloud version I am using is 4.0.3.56 (latest version at the moment).
iCould used to upload all my new photos to the "PhotoStream" folder in my PC but is not working anymore. I tried to uninstall iCloud and it does works for a moment but not very long. The next day when I took some new photos or someone sent me some new photos, these photos are not uploaded into my PC.
I found a solution on this communities. The solution was like 1 or 2 years ago, asking to install the older version of the iCloud. I have tried it but is not working either. Any help would be greatly appreciated. Thanks in advance !

Hi Kevinmvb,
Welcome to the Support Communities!
The article below may be able to help you with this. It sounds like you may have moved your photos out of the Uploads folder where they need to reside.
iCloud: My Photo Stream troubleshooting
http://support.apple.com/kb/TS3989
Cheers,
- Judy

My Mac Pro had new hard drive installed. I downloaded the latest iPhoto application. All my photos have been restored to a folder which I dragged to the iPhoto icon. The photos are not down loading.

My Mac Pro had a new hard drive installed. Everything was restored by Carbonite except my photos. Carbonate restored them to a folder and the folder was dragged over the newly installed iPhoto app. The photos are not installing. What next?
Ron Rushford

What happens when you try File -> Add to Library?

Facebook images, profile photos, cover photos are not loading. Only small blue square with question mark. Same thing in Safari, FireFox, Chrome.

Since July on MacBook Pro facebook images, profile photos, cover photos are not loading. Only small blue square with question mark. Same thing in Safari, FireFox, Chrome. Everything is up to date including last version of Adobe Flash. And watching YouTube also a problem. Video is skipping, freezing for few seconds and jumps forward. At the same time on Toshiba with Windows Vista under the same account, same wi-fi connection everything works fine.
Please help with sugesstions to fix the issue.

Seems like problem is solved but it might be temporarily. Anyway. Click on the image, it will open facebook photo browser. Image is not loading so right click on the blue box with question mark, save image as. It will start downloading but without any success since browser do not see the image. After this attempt refresh the page and close all tabs with facebook. Try to open facebook once again. For some reason after this weird actions all images displayed properly. Do not know for how long but now it works.

My photos are not being rec'd from either Adobe photoshop 10 or 11???

My photos are not being rec'd from either Adobe Workshops 10 or 11? Help. I have always been able to send via emai photos from Adobe 10 never have I been able to send them thru 11??/

Hello dbe.
Please check to see if a borderless paper size has been selected before printing.
If borderless printing is enabled, you may experience a cut off on the outside areas of the image. This is the only way that an edge to edge bleed can be done.
To retain the entire image, the bordered option would have to be used for printing.
Please visit the following link below to contact our support group for additional assistance.
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

My photos are not printing right with adobe manages color but works when i use printer manages color. never had any issues untill a week ago.

Similar Messages

Maybe you are looking for