My "places" in photos is working on my phone but not transferred to my iPad in Photo Stream even though the photos transfer. It used to work, so did I do something?
My "places" in photos is working on my phone but not transferred to my iPad in Photo Stream even though the photos transfer. It used to work, so did I do something?
OK Vicky, good clues...
See if this helps...
Open Keychain Access in Utilities, use Keychain First Aid under the Keychain Menu item, then either check the Password under that item, change it, or delete it and start over. See if there are duplicates, should be one for Incoming & one for Outgoing.
Resetting your keychain in Mac OS X...
If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
http://support.apple.com/kb/TS1544
Similar Messages
-
Can get the AirPlay to work off my computer, but not my iPhone or iPad. I have the latest software. Airplay logo never appears on iPhone or iPad.
Try here > http://support.apple.com/kb/TS1538
-
Institution Provider Page works well when I click the "Preview in iTunes" but not in "Preview on iPad". What seems to be the problem?
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
See also http://kb.mozillazine.org/Error_loading_websites (Error_loading_some_websites) -
HT201317 why are some of my photos in albums on my phone but not in photo stream
Why are photos taken with iphone in "album" but not on photostream? All setting are on.
With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
what are the pixel dimensions of the photos in question?
did you import one library into another at any time?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
how much free space on your boot drive?
OT -
I have a photo stream that was created from a subset of photo from a rather large Aperature project. Some of the photos show up rotated within the photo stream but are not rotated within the project. Why is this happening and how do I fix the rotation within the photo stream? I do have the latest version of Aperature and have all of the necessary updates applied to my devices used to view the photo stream. The photos do show up rotated within the photo stream segment of Aperature, so I am sure it is not an issue with the output device (iPad and Apple TV). I do know that I cannot edit photos within a photo stream, but no amount of editing within the project allows the photos to be properly rotated within the photo stream. All help would be greatly appreciated.
That will work, but it is the long way 'round.
As Frank noted, Book Albums are just specialized Albums. Albums can show any Image in your Library, regardless of where the Album is located on the Library Inspector, and regardless of which Project contains the Image. You can put your Albums anywhere (in a Folder called "Books" for example). You can put Images from anywhere in your Library in any Album.
The easy way 'round:
- Make a new Book Album
- Select Images you may want to put in your Book. Flag them.
- Select some more. Flag them.
- Go to the "Flagged" container (listed near the top of the Library Inspector), select all, and drag-and-drop them to your Book Album.
- Repeat as needed, or just drag-and-drop directly into the Book Album.
Note that you can remove any Image from any Album (including Books) by selecting and hitting the "{Delete}" key. This _does not remove the Image from the Project that contains it, or from the Library.
Note, too, that once the Images are in your Book Album, you then put them in the Book you are creating for publication. The Book Album contains the superset of Images with which you populate the Book itself. The Book Album also holds the Book.
A good (imho ) introduction to the parts of Aperture can be found in this short guide I wrote.
The User Manual is helpful. Here is
the chapter on making Books.
From that chapter, here is
the section detailing how to create and populate a Book Album. -
Family share works on one phone but not the other
My husband and I used to share an Apple ID so we could get contacts and calendars on each others devices. Photo library/sharing, calendar among other iCloud and Family Share opportunities to keep things separate yet some together seemed more practical. We have two children coming to the age where we will be getting them phones, but now I question which is the best way to set this up. His phone kept the original Apple ID and I created one for my phone. My phone works wonderful with family share in regards to Find My Phone and calendar and sharing to his phone. However his phone seems to have combined his ID with mine so when I change the family share photo of him, it changes my photo to the same one as his. He can not see me on Find My Phone, but the calendar he can see just fine that I create on my phone and share. He can share his location with me via txt msg, but I can not share mine with him. My iPhone 5 and iPad 3 seem to be connected ok with the exception of photo library not shared across the two and the ability to answer a call through the iPad.
Any ideas about what I am missing?I Have similar concerns: my wife and me with ios7 shared an Apple ID in order to manage an unique contact list. Also we shared with our son the same Apple ID to access the iTunes store. But all of us used our own Apple ID to configure mail, calendars, FaceTime, iMessage and Friends App. Now, after updating to iOS 8 seems that the family option could be very useful to make order in our devices: everyone could configure its own device with its own Apple id. But it seems that it is not possible to share the contact list between different apple IDs among the same family. In the other hand, the application Friends now is associated to the icloud id, so if we decided to continue sharing the same ID, becomes impossible for my wife and me to know the location of each other Using the Friends App.
So, it could be very useful if Apple decided to let the possibility to share the contact list among users of the same family.
IS there another way to bypass our problem? -
I have an Ipod touch and recently added new music to my Itunes library. When I sync with the library, the new music does not show up on my ipod. The sync process seems to be working and there is still plenty of space on the Ipod for new music so I'm not sure what the problem is!
What happens when you try to sync?
Was the iPod previous synced to another iTunes library/computer?
Have you successfully synced from this iTunes library/computer before?
Do the songs play in iTunes?
Do you have the right boxes checked to sync?
iTunes: Syncing media content to iOS devices and iPod
Do you have any Restrictions (Settings>General>Restrictions) set that would prevent syncing those songs? -
Why does syncing photos with my iPad take so long even if the photos on my Mac haven't changed?
Whenever I sync my iPad (1st generation) with my Mac/iTunes, everything syncs fine, but the syncing of the photos takes forever - even if none of the photos has changed on my Mac. Is this normal? Anyone else experiencing long sync times? Is there any way to tell the iPad or Mac to not bother re-syncing existing photos that haven't changed (just do a delta?) Thanks.
Welcome to Apple Support Discussions.
Considering OS X is extremely stable I don't think there is something Apple needs to address. However there very well could be an issue with your set up. One of the common issues is if you live in a suburban area you may be competing for bandwidth for wi-fi with your neighbors. Most wi-fi routers are use channel's 5 & 6 as their default channels and most people never change them. Where I less I no less than 15 wi-fi networks within range so I changed my channel. You can download and use iStumbler (Google it) and it will tell you what networks are within range and what channel each is using. There are about 11 channels so then it's just a matter of changing your router's channel. If you are using a Airport Extreme or Airport Express you can use Airport Utility to do this, if you are using another router then locate instructions for how to change channels.
Another possiblity is your ISP could be causing the problem by using DNS settings that create problems. I use Comcast as my ISP (if you're not familiar with them, they're huge!) and was forced to change mine. Here is an article from MacWorld that explains the problem and how to fix it.
http://www.macworld.com/article/146064/2010/02/troubleshootdns.html?t=234
Just some ideas to check.
Roger -
Photos are rotated correctly on PC but 90 degs out on iPad????
Photos are rotated correctly on PC but 90 degs out on iPad????
Found the issue. BAD "EXIF" file data. Spent a few hours searching for EXIF editor to modify.
Ended up using "PICTOMIO" to edit camera orientation data. Worked OK. -
ARD works from inside network, but not from outside.
I can connect me MB to my G5 no problem when on the network inside my home. But if I'm on another network (and supply the correct IP address) I get an "ARD Not Active" error.
All seem to be well, both machine are up to date and this works locally.
What's wrong?That I can't tell. I travel and all I can do is open ports at home. I have no control over the hotel's systems.
This was up and working fine - now it just won't connect. Even for the same locations that used to work just fine.
But perhaps this is something:
I recently installed Parallels Desktop. Now in the Network pref Pane, there are "Parallels Guest-Host" and "Parallels NAT".
That's new, could it be a clue? -
I-pod touch works on a Mac but not a PC
Please help! My I-pod touch works on a Mac but not a PC. When hooked up to a PC, the device is not recognized in I-tunes message, says I-pod in recovery mode and to restore, after checking update and restore, receive unknown error message (9). Have tried unistaling and reinstalling I-tunes, using different USB ports, creating new user, restarting computer, using different PC, and trying to reset by holding sleep/wake and home buttons all to no avail, very, very frustrated, everything is fine on a Mac!!
I have CA Internet Security Suite Plus 2010, version 6.0.0.264.
I was wondering about that one in particular.
Try configuring you CA as per kalda01's instructions in this post:
http://discussions.apple.com/message.jspa?messageID=10525876#10525876
(Sometimes switching the security software off doesn't help, but doing the configuration does help. Not sure what's afoot with that, but it has happened with other security-package problems with iTunes in the past.) -
FaceTime works on phone but not computer
My FaceTime works on my phone but not my computer, though my Wifi works fine for any other internet application. Why can't I use FaceTime on my computer?
The Version of Snow Leopard is 10.6
My only thought as to why Facetime is not working is because of the recent changeover to iOS 6.
Apple are obviously trying to get everyone on to Mountain Lion, but some users, including myself
prefer to wait a while to let the gremlins get sorted.
Any ideas on the above will be welcome -
I have uninstalled and installed the latest Flash Player 17 many times. I am currently working on a yearbook site that gets locked every time I try to add photos. I have also received a plug in error even though the plug in box is checked. I have a MacBook Pro. Please help!!!
To give you any useful advice, I'm going to need to know more about your computer and browser:
https://forums.adobe.com/message/5249945#5249945 -
Is there a way to delete the photos in Photo Stream on my mackbook pro notebook?
My phone became corrupted today and, after continuing to have problems with 2 new phones, the apple specialists determined that the only possible explanation was the presence of a corrupted photo or video in photo stream; and that the only way to use my phone without it shutting down was to deactivate the photo stream on it. It worked, but I would like to be able to have the option of using photostream again. The apple folks suggested that I delete all photos from photo stream on my computer; and then, when it is "empty", reactivate it on my phone? Is anyone familiar with this problem?If it says Not Enough Storage Space on iCloud then you can get more Storage space for iCloud if you want to backup more Data on iCloud Storage. You will find the Pricing for Additional Storage Space and how to Buy Storage Space for iCloud from your Device in the Link below.
http://support.apple.com/kb/ht4874
http://support.apple.com/kb/HT5879 -
Flex mobile 4.6 app works inside flash builder but not in android emulator
Originally posted on stackoverflow: http://stackoverflow.com/questions/8663892/flex-mobile-4-6-app-works-inside-flash-builder- but-not-in-android-emulator
I have a basic flex mobile 4.6 app and it works fully fine in the flash builder built-in emulator using an android device profile like aria...
It also launches fine in the android emulator but one particular view shows blank (and this view works fine in flash builder).
Before I get in to many details of the view are there any categorical gotchas that can be causing this?
I can't seem to get the trace statements from the app to show in 'adb logcat'. It seems I need to compile a debug version of the apk but I don't know how to do this. I use the 'Export Release Build' from the Project menu in flash builder and it doesn't seem to have an option for debug=true.
The problematic/blank view basically uses the stagewebview and iotashan's oauth library to call linkedin rest apis... A different (and working) view can make restful web service calls in the emulator fine, so it doesn't seem to be an internet permission.
The source code contained in the problematic/blank view is almost identical to the tutorial found at:http://www.riagora.com/2011/01/air-and-linkedin/
The differences are: a) The root tag is a View b) I use StageWebView instead of HtmlContainer c) I use my own linkedin key and tokens.
I would appreciate it if someone can provide me with some pointers on how to troubleshoot this situation. Perhaps someone can tell me how to debug the app while running in the emulator (I think I need the correct adt command arguments for this which matches the 'Export Release Build' menu but adds the debug param?)
Thanks for your help in advance.
Comment Added:
I suspect that this has to do with connections to https:// api.linkedin.com and https:// www.linkedin.com. The only reason I can think of that the same code is not having issues inside of Flex Builder but indeed having issues in the Android emulator is something to do with certificates. Any ideas?Thanks er453r,
I have created a project that clearly reproduces the bug. Here are the steps:
1) Create a UrlLoader and point it to https://www.google.com (HTTPS is important because http works but HTTPS does not)
2) Load it
3) Run in Flash Builder 4.6/Air 3.1 and then run in Android emulator. The former works with an http status 200. The latter gives you an ioerror 2032. I am assuming what works in Flash Builder is supposed to work in the Android Emulator and what what works in the emulator is supposed to work in a physical device (plus or minus boundary conditions).
I see a certificate exception in adb logcat but not sure if it's related...
Here is the self contained View code which works with a TabbedViewNavigatorApplication:
<?xml version="1.0" encoding="utf-8"?>
<s:View xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx"
xmlns:ns1="*"
xmlns:local="*"
creationComplete="windowedapplication1_creationCompleteHandler(event) "
actionBarVisible="true" tabBarVisible="true">
<fx:Script>
<![CDATA[
import mx.events.FlexEvent;
protected var requestTokenUrl:String = "https://www.google.com";
protected function windowedapplication1_creationCompleteHandler(event:FlexEvent):void
var loader:URLLoader = new URLLoader();
loader.addEventListener(ErrorEvent.ERROR, onError);
loader.addEventListener(AsyncErrorEvent.ASYNC_ERROR, onAsyncError);
loader.addEventListener(SecurityErrorEvent.SECURITY_ERROR, securityErrorHandler);
loader.addEventListener(HTTPStatusEvent.HTTP_RESPONSE_STATUS, httpResponseStatusHandler);
loader.addEventListener(IOErrorEvent.IO_ERROR, ioErrorHandler);
var urlRequest:URLRequest = new URLRequest(requestTokenUrl);
loader.load(urlRequest);
protected function requestTokenHandler(event:Event):void
protected function httpResponse(event:HTTPStatusEvent):void
label.text += event.status;
// TODO Auto-generated method stub
private function completeHandler(event:Event):void {
label.text += event.toString();
trace("completeHandler data: " + event.currentTarget.data);
private function openHandler(event:Event):void {
label.text += event.toString();
trace("openHandler: " + event);
private function onError(event:ErrorEvent):void {
label.text += event.toString();
trace("onError: " + event.type);
private function onAsyncError(event:AsyncErrorEvent):void {
label.text += event.toString();
trace("onAsyncError: " + event);
private function onNetStatus(event:NetStatusEvent):void {
label.text += event.toString();
trace("onNetStatus: " + event);
private function progressHandler(event:ProgressEvent):void {
label.text += event.toString();
trace("progressHandler loaded:" + event.bytesLoaded + " total: " + event.bytesTotal);
private function securityErrorHandler(event:SecurityErrorEvent):void {
label.text += event.toString();
trace("securityErrorHandler: " + event);
private function httpStatusHandler(event:HTTPStatusEvent):void {
label.text += event.toString();
//label.text += event.responseHeaders.toString();
trace("httpStatusHandler: " + event);
private function httpResponseStatusHandler(event:HTTPStatusEvent):void {
label.text += event.toString();
trace("httpStatusHandler: " + event);
private function ioErrorHandler(event:IOErrorEvent):void {
label.text += event.toString();
label.text += event.text;
trace("ioErrorHandler: " + event);
]]>
</fx:Script>
<fx:Declarations>
<!-- Place non-visual elements (e.g., services, value objects) here -->
</fx:Declarations>
<s:Label id="label" y="185" width="100%" color="#0A0909" horizontalCenter="0" text=""/>
</s:View>
Maybe you are looking for
-
Why am I getting this error message, "Disk is too slow. (Prepare) (-10001)"
Hello all! I've been using GarageBand for a while now and I've accumulated quite a few files. Along with all of my movies and iTunes library, my internal hard drive filled up rapidly and I didn't catch it. I received a warning message on my screen
-
My printer says it is offline - how do i get it to be online - i have a mac and airport extreme...
Please help get my printer to work it is on but my computer seems to tell me it is offline. I just got my Apple Extreme back up after it seemed to have lost its connection... and now it will not print it shows items in que but not actually printing.
-
Hi all. Is it possible to setup a Hotel scenario with Apple TVs? What would be the limitations and how could it work? How many could be combined, is it even a good idea? Regards
-
Hi, Can any body tell me how to create a new chart of account for my company. Can I copy the existing chart of account from the chart of account list and change it to my chart of accounts, or is there any other method, by which we do it so that ev
-
could someone please post the original bios for N9800GT-T2D512-OC (v117)??? or a link to where i could find it... the problem is that i lost my backup of the original when my usb pen drive died, so now I'm in a pickle, cause i messed up the bios and