My position in OVI map not showing my correct posi...

I installed new version of OVI maps today.
when I clicked on "my position" , it is not not showing my position correctly,
why it is so? anybody has any experience?

@gavin_street
If Nokia Maps have not been used for a while stored ephemeris GPS data is out of date or similarly if application updated data can become corrupted. You don't mention whether you are hapy for Assisted GPS postioning method to utilise a network access point to contact positioning server = supl.nokia.com or whether relying solely upon the Integrated GPS of device. Try going outside away from tall buildings if feasible, launch Nokia Maps and wait 20 - 30 minutes for it to lock on to position.
It might be an idea to download LeGPSData2 application from Nokia Store so you can keep track of number of satellites acquired:http://store.ovi.com/content/208256
Happy to have helped forum with a Support Ratio = 42.5

Similar Messages

Ovi Map not showing railway lines on N8 (UK map)

Hi
I've recently purchased a N8, and I was suprised to see the UK maps not showing the railway lines. However if I scoll across to Germany for example, the lines are clearly shown.
They used to show up on my 5800 and show up on the Ovi maps website, so why no lines on the N8? Or is it just an issue with my device?
Can any other N8 users with Ovi Maps v3.06 confirm whether they show the rail lines in the UK please.
Any suggestions? I've tried re-installing Ovi Maps and re-downloading the maps but no change.
Thanks.
Regards, Brian.
Solved!
Go to Solution.

What version of the map data do you have as my N8 with 0.2.42.122 shows railway lines eg in Birmingham in the attached image. I have looked in a few places where I know lines run and all have been there, but it is possible that some have been missed.
N8-00 pc059C9F6 Belle
808 PureView pc059P6W5
Attachments:
Scr000087.jpg ‏46 KB

Map not showing

Map not showing standard,hybrid and satellite only only location drop pin is visible

If you havn't already, i would download the latest version of the Maps application for your phone and load the latest map data using map loader.
They can both be found from:
http://europe.nokia.com/explore-services/maps/download
with maploader make sure you delete the older map data before loading new maps (there is a button there for this)
Although i work for Nokia, my opinions are my own!
Got a Maps query? Check our Maps FAQ's

Date difference is not showing the correct result for date interval

Hi Expert,
                I've created two formula variable one for PO date and another for GR date
while i am taking the date difference of GR and PO date for single PO date selection
it showing me correct result , but while i am taking the date interval for PO date it not
showing the correct result.
eg: PO date: 01.01.2010   for a particular PO and Gr date is suppose 03.01.2010, 06.01.2010
      it showing the result 2 and 5.
But if i am taking date interval for PO date:
eg: 01.01.2010 - 31.01.2010
PO date: 10.01.2010 and GR date are suppose 15.01.2010, 22.01.2010 and 30.01.2010
it showing me 14, 21 and 29
Thanks and Regards
Lalit Kumar

Hi Expert,
                Through replacement path.
Thanks and Regards
Lalit Kumar

Oam does not show the correct configuration information

Oracle apps,
An issue with the oam.
There are 2 nodes in our system. In 12
One is for db and cm
The other is for forms and apache.
The system is running fine.
But from the OAM, where it does not show the correct configuration info.
From the OAM, all the services are (including db, cm, forms, apache) on one node.
The issue might be caused by the fact that the web tier was cloned from the cm tier as a workaround for some patch errors in web tier.
I even used the EXEC FND_CONC_CLONE.SETUP_CLEAN; to clean the system tables and ran
Autocfg on all tiers. But it didn’t solve this issue.
How can I fix this OAM problem to make it show the correct information?
Thanks,
Lily

Thanks for reply.
Yes, I did commit it.
The hostname information is correct.
On oam, this web node is there but all the service actually running on this node is
showing under the cm node .
<TIER_DB oa_var="s_isDB">NO</TIER_DB>
<TIER_ADMIN oa_var="s_isAdmin">YES</TIER_ADMIN>
<TIER_WEB oa_var="s_isWeb">YES</TIER_WEB>
<TIER_FORMS oa_var="s_isForms">YES</TIER_FORMS>
<TIER_NODE oa_var="s_isConc">YES</TIER_NODE>
<TIER_FORMSDEV oa_var="s_isFormsDev">YES</TIER_FORMSDEV>
<TIER_NODEDEV oa_var="s_isConcDev">YES</TIER_NODEDEV>
<TIER_WEBDEV oa_var="s_isWebDev">YES</TIER_WEBDEV>

Mini Calendar does not show the correct date

Hi there ,
in iCal on the bottom left side of the window is the mini Calendar, when I switch between months in this mini Cal,it does not show the correct month anymore and even the button "Today" can not revert the day back ( for example we are now in September, when I open iCal it shows it correctly but after going to next or previous months using the triangles on this mini Cal, the problem comes up ! )

Maybe it wasn't receiving the correct info from your carrier. You're supposed to turn your phone off once in a while so the carrier can update stuff. I had originally heard that you should do it once a day but I never did that.

The percentage completed UI is not showing the correct data

Hi All,
I have received complaints from one of my larger customers that a very long form we have created is not showing the correct % completed at the bottom. They get to the penultimate page (the last page only have three text boxes on) and it state that only 41% of the form has been completed.
It looks to me like the UI is not updating as the questions are being completed. Rather it waits until you move to the next page.
This is what makes our form look rubbish - you are being told that you have only completed 41% of the form only to move on to the next page and bam, you only have three more boxes to complete.
Can somebody help me out here.
Thanks,
Bill

Hi Bill;
I can take a look at your form but you are right that only the pages are accounted for in the percentage and not the form fields so it can be far off from reality. If there is skip logic in a form that can make it vary more. It is likely that it is working "correctly" (considering how we calculate) in your form but if you send me the link to your form at [email protected] I can see if it is not.
Thanks,
Josh

Installer is not showing the correct Nodes in RAC

Hi Experts,
We are in the process of upgrade oracle database from 9.2.0.3 to 9.2.0.8 in RAC. While installing the 9.2.0.8 patch set it is not showing the correct database nodes, instead of it showing production database nodes, but we are doing doing it in test machine.
Test Machine hostname:
db1
db2
Prod machine hostname
prod1
prod2
it showing the prod1 and prod2 only.
please suggest us to solve this
Note:
We copy the oracle_home from prod to test for test database cloning.
Thanks
R.Sundaravel

Then it is highly likely your RAC cluster is not correctly configured.
Open an SR at metalink as the Cluster Verify tool does not exist for your old version.

Labels Not Showing Up Correctly in Workflow Manager Web Page

I have installed the Workflow Server 2.6.3 on Red Hat 7.2 against the Oracle 10g database. When I go to the Workflow Manager web page and login, all the labels appear between brackets "[]" and have incorrect names such as the following:
WF_WORKFLOW_TITLE
WFA_WTITLE
OPEN_NOTIFICATIONS
WFA_FINDTITLE
WFRTG_FIND_TITLE
etc......
I ran the Configuration Assistant again and this didn't solve the problem and I've also verified that the mappings in the server configuration file are correct for OA_JAVA, OA_DOC, OA_MEDIA. Looked through workflow installation log and no errors appear. I installed the web server (Oracle Apache Standalone downloaded from OTN in a separate Oracle Home). Any ideas how to fix these incorrect labels or why they're not showing up correctly??
Thanks in advance,
Rich

Hi,
I've not seen the problem myself, but it seems that the language has not created the correct lookups in the WF_RESOURCES table.
If you look for a name of (for example) 'OPEN_NOTIFICATIONS', there should be an entry for the language you are using (US) which translates the prompt for you. If it's not there then you will probably need to add a language through the installer - I don't think there is a SQL file that you can just run to do it. Alternatively, install it in a new environment and then just extract the resources you need from that system and insert them into this one.
HTH,
Matt
WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
Have you read the blog at http://thoughts.workflowfaq.com ?
WorkflowFAQ support forum: http://forum.workflowfaq.com

Lightroom 4.1 can not show text correctly

lightroom 4.1 can not show text correctly when publish in PDF and blurb format
the text can be show correctly in JPEG format
but lightroom 4.0 can show correctly with the same book.
i cant publish my book on blurb now

I don't think LR4 adjustments can be directly sent to CS4, because CS4 cannot interpret LR4's new processing engine.
I think you have to use Edit In... and create a TIF or PSD and send those to CS4

My storage is not showing the correct space

Hi,
Why my storage is not showing the correct amount of space? I have MBA mid 2013 with 121gb. However my storage show a different value than its suppose to be especially on the apps. I google the problem, mostly its because of the time machine but I never use the time machine. and some of my friend tells its probably a junk. is the third party apps like apps cleaner and clean my mac is helpful? I attached the screen capture of my storage. As you can see the value of apps is 162gb in fact my flash is only 121gb. its doesn't make any sense. Please help.

Do not use third party apps such as CleanMyMac on your Mac. They have no effect what so ever on storage space. Your Mac runs maintenance in the background for you > Mac OS X: About background maintenance tasks
Reindex Spotlight then check the storage > Spotlight: How to re-index folders or volumes

[Nokia N8] Ovi Maps NOT using GPRS data

I recently updated the my Nokia N8 software to PR1.1
I had used Ovi Maps before and it was working properly. The GPRS data was being utilized for positioning. But after updating the software, the counter at the bottom remains 0.0kb and shows "Not connected symbol"
Here is the screenshots:
Other configuration:
http://i52.tinypic.com/mvg2nq.jpg
http://i52.tinypic.com/kci7o8.jpg
http://i54.tinypic.com/14nzfw2.jpg
http://i56.tinypic.com/29yp47d.jpg
http://i53.tinypic.com/2vtw7yc.jpg
http://i53.tinypic.com/15wnomt.jpg
Please help
Solved!
Go to Solution.

farby wrote:
A bit off track.. but can you browse internet thru' your phone.. ? Just to confirm that the Access Point settings haven't been disturbed..as all the settings / configuration for the Maps applications seems to be OK to use the GPRS data..
. Even I had the same thought at first, so I already checked it before I sharted the topic and I even checked now just to be sure.
Yes, I CAN browse the internet, both with the Default browser AND with Opera Mobile.
Also, after I browse the net, I can confirm the data usage in the logs for each session.
But, when I use Ovi Maps, the session for "Vodafone live!" does exist in the log but the usage is 0kB (U/D).
aspergerguy wrote:
@RCL0000ZK
Any particular reason for not upgrading OVI Maps to v3.06_10wk46 on your N8 as OVI Suite has been delivering this version for quite a while?
Here at my side, that update just doesn't show up in Ovi Suite.
I only see "Real Golf 2011" in the Install Device Application section of Ovi Suite.
Just to make sure, is this what you mean?

HELP- Ovi Maps - Not accurate?

Just acquired my X6 phone last week...with importance on choosing this model being the Sat Nav package. First thing I did was downloaded latest Ovi Maps etc and have been trying system out over last few days. (Using UK Maps in Central Scotland) However...I'm having lots of varying problems continuously including:- 1) Routes are often completely wrong...taking you in the wrong direction, miles away from the route that it should calculate. 2) Big lags in messaging and corresponding map data appearing on screen. e.g. You arrive at a roundabout... before you get any voice instruction at all. Then, you've passed through the roundabout and heading merrily on your way...yet the voice instructions are only beginning to tell you that you are approaching the roundabout... and which exit to take. I mean ....way too late. 3) General lags can be as much as 300 meters. e.g. Map is 300 meters behind your actual position. Then it catches up...only to fall back again. 4) Also seems to show up occasional side roads and junctions which don't even exist. 5) Suddenly...for no reason announces "recalculating route" and appears lost for a while before getting back to where it should be. 6) Other spurious, non sensicle voice commands - e.g. turn right - whilst traveling along a stretch of motorway! I've tested running alongside my old Sat Nav system and also a Tom Tom which work perfectly...but Ovi Maps on my X6 is so far out... it's totally usable. Do I have a problem with my phone...or is it the OVI Maps system faulty? Anyone else experienced this. Solutions? HELP PLEASE!

Hi Comodo,
Two examples:-
Trip 1 - from Postcode - G62 6RA to KA12 8RR: Completely wrong route calculated (which I followed out of curiosity) taking me in a very long indirect route. I could find no logic to it at all. Also got badly lost with ridiculous instructions at various sets of junctions and roundabouts when joining the M8 motorway near city centre Glasgow. There were a great number of errors during this journey. (The interesting thing was that it calculated the same journey in the opposite direction correctly)
Route 2- from KA8 9AE to KA12 8RR - various problems and errors including lags and delays in info and incorrect instructions or very late instructions particularly at roundabouts.
Thanks for your interest. What do you reckon?

Ovi map not working in Nokia E63

I have tried to install OVI maps in my Nokia E63 phone, but it is showing as phone is not compatible for the same. Why maps is not compatible for E63 but is working for E55 or other old models. Can anyone tell me the solution so that i can also use navigation service in my phone as i have to travel regularly?

@meetkalsen10
Welcome to the forum!
Are you trying to install this version?
http://static.s2g.gate5.de/nokiamaps-client/nokia_maps_3.01_09wk44_b01_s60_3.1_lm_rom.sis
As E63 has no embedded GPS it would need Bluetooth GPS to act as navigator as network GPS is not accurate enough for this purpose.
Happy to have helped forum with a Support Ratio = 42.5

Current position in ovi maps 3.06

Hi All,
I have N8 with ovi maps 3.06.
I was just wondering how to get current position in current maps, as there is no option as there was in older versions.
I click on maps and then nothing happens
Plese help
Thanks

Once you get the GPS Lock (The Red Dot stops flashing..) and start Navigation.. you will see your Location ( a small arrow ) on the map moving as you travel..
--------------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

My position in OVI map not showing my correct posi...

Similar Messages

Maybe you are looking for