My printer menu is no longer displaying in English. I can't read the display to try to troubleshoot

My boss' printer HP Color LaserJet CP2025 - menu no longer displays in English. I can't read the display to troubleshoot or reset. Is there another way to change the setting?

I have not verified these steps, but this is what I located:
A. To change the display language back to English, please perform the following steps:
1. Press the right arrow 2 times, press the OK button (you should be in the System Setup menu).
2. Press the OK button again (you should be in Language). 
3. Press the right arrow until you see something that may be English, press OK button. The menu is a continuous loop, so if you miss it the first time the option will return.
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Similar Messages

  • Web pages don't display properly and I can't read the text on the web pages

    so annoying i use chrome.
    try to use safari 2-3 times a year and it makes me want to throw my computer across the room.

         Start up in Safe Mode.
         http://support.apple.com/kb/PH11212

  • In iPhoto how do I stop files from auto resizing as they import? I don't want my files reduced to 72. The option to choose size on the export menu not suitable for up sizing, as you can't restore the quality removed?

    in iPhoto how do I stop files from auto resizing as they import? I don't want my files reduced to 72. The option to choose size on the export menu not suitable for up sizing, as you can't restore the quality removed.

    Short answer: They are not resizing, there is no quality lost. The dpi is only set when you decide what size you're printing at
    Longer answer:  Dpi means nothing in the digital world of your computer. There are no "inches" to have "dots per..." Size is measured in pixels. That's the same on your camera. It doesn't take 10 x 8 or 6 x 4 shots. It takes shots measured in megapixels. For instance 4,000 x 3,000 is a 12 megapixel camera.
    Using that example, that shot from that camera has 12 million pixels. So that's how many "Dots" there are. To decide the ratio of dots per inch, you now need to decide the "inches" part. And that's printing. Print at 10 x 8 and the dpi will be 4,000/10 or about 400 dpi. At 6 x 4 then it's 4,000/6 or 660 dpi. Work the other way: Print at 300 dpi and the resulting image will be about 13 inches on the longer side.
    So, your photo as a fixed number of pixels. Changing the dimensions of the print will vary the dpi, changing the dpi will vary the dimensions of the print.
    For more see http://www.rideau-info.com/photos/mythdpi.html
    Regards
    TD

  • Can Not Calibrate the display. The factory profile for the display...

    I have an apple cinema display 20" and a mac powerbook g4 (1.25 GHx PowerPC g4, 1.25 GB DDR SDRAM) with os 10.4.9. All of my software is up to is date.
    I used to be able to calibrate my colorsync profiles. My computer's hard drive recently failed and I had it replaced and the system re-installed (If any of you live in NYC, I took it to tek Serve, and they know what they are doing).
    Now when I try to calinbrate my monitor I get the error "Can Not Calibrate the display. The factory profile for the display could not be found." Like I said I have updated to 10.4.9 but this hasnt solved my problem. I have restarted my computer, and this has also not solved my problem.
    Any help!?! Please! This is important to me as I do color work for print and I need to see colors accurately When I use my computer.

    I fixed it already. There was indeed a problem in the preferences. In my case I removed the whole preferences folrder to the desktop (which forces the computer to rebuild it fresh) and it worked fine! Then one at a time 'as it was needed, I put back the preferences for other applications (mail, itunes etc). Turns out no preferences was better than whatever corrupted preference was in there causing the problem. You know what I mean. If no preferences are there the applications start over building it new automatically. So it was like a preferences restart. sorta.
    Unfortunately, since I dont have applecare I had to spend 50 bucks on the phone with apple to figure this out. It's amazing how long it took them to actually pinpoint the problem. Hopefully if anyone gets that error in the future they'll find this post on google and save some bucks.

  • Firefox 4 -- just downloaded and menu & top bars are in some strange language - not english. I can't seem to get to a tools menu to change the language because I can't read the top menu.

    Just downloaded Firefox4 and can't read the top line menu because it's in some strange language with symbols instead of letters. How do I get it to display English in the top line menu?
    If I could read the menu, I'd go to tools and see if there were an option to change the menu language, but since I can't read the menu choices, I'd only be pushing meaningless buttons.
    [email protected]

    Thanks. I tried it and get the attached screen. I don't see anything which lets me change the language in the menu.
    Before I give up completely & just stick with Chrome or IE, I'll bring my laptop which has a correctly configured version of firefox 4 side by side with my desktop & use it as a template for clicking on the correct gibberish lines. I still don't see an option for changing menu bar language, but I'll search around a bit.
    It would help if I could get phone contact with someone at Mozilla, but they don't seem to list a phone number on their help page ----
    Alan Taplow
    844 John Fowler Road
    Plainfield VT 05667
    802-454-4675 Cell: 813-230-3940 [email protected]

  • How can I avoid the display of ORA-31684 during impdp import?

    Hello,
    I'm working on a cross-platform tablespace migration (from SunOS to RedHat Enterprise Linux).
    During the import with DataPump, I have several ORA-31684 error messages ("Object type TYPE : "OWNER"."OBJ_NAME" already exists"). Some of my TYPE objects exist already in the Linux instance of the DB. The messages appear only for 4-5 TYPE objects, while overall I have around 180 TYPE objects owned by the schema owner.
    How can I avoid the display of these error messages? I don't want to drop the TYPE objects individually from the Linux instance, as the object list may vary in time.
    Thank you,
    Adrian

    Hi,
    There is no way to tell the impdp to ignore those errors. They will be printed to the error log and to the screen where the job is being run.
    Dean

  • How can I change the display of Inbox in my iPad's mail app- so that it takes up the full screen?

    How can I change the display of Inbox in my iPad's mail app- so that it takes up the whole screen, as opposed to just about one third; the other two thirds display the full text of the selected email?

    You can't change the display in the Mail app, if you are holding the iPad in landscape orientation then the left-hand third will be for navigation, and the right-hand two-thirds will be an email. If you hold the iPad in portrait orientation then the navigation section becomes a drop-down section.

  • I am using a mini display to hdmi with my macbook and the display works fine. However, the sound will only play iTunes such as music and movies but when i go online to watch movies on youtube it will not play any sound. Please help

    I am using a mini display to hdmi with my macbook and the display works fine. However, the sound will only play iTunes such as music and movies but when i go online to watch movies on youtube it will not play any sound. Please help

    HDCP maybe? Read this http://www.macnn.com/articles/08/11/26/displayport.drm.conflict/

  • After upgrading to ios 6.1, I experienced the following problem: I am no longer able to read the magazine I subscribed (The New Yorker) if I don't have access to internet. If the iPad is on FlightMode I can't read the magazine or the books in iBooks

    After upgrading to ios 6.1, I experienced the following problem: I am no longer able to read the magazine I subscribed (The New Yorker) if I don't have access to internet. If the iPad is on FlightMode I can't read the magazine or the books in iBooks. Can you help me?

    I am having the same problem.  I have a 2nd generation ipad wi-fi only.  All was working great until I upgraded.  NONE of my downloaded magazines or rss-feeds are accessible.    For the magazines, their icons show up on the "shelves" but once you click on one it wont even take you to the "issues" i have downloaded.  it jumps back to the shelf page. 

  • Unable to connect to my printer HP LaserJet Professional P1102w as keep getting message  Can't install the software because it is not currently available from the Software Update server.

    Unable to connect to my printer HP LaserJet Professional P1102w as keep getting message  Can't install the software because it is not currently available from the Software Update server. Please help.

    Installing an HP network printer

  • How can you modify the displayed columns on a Related Information List?

    How can you modify the displayed columns on a Related Information List? For example, how could you add the "Type" column to the List of columns displayed for Service Requests when you are viewing the Contacts Detail page?
    Thanks

    I'd have to say I think this is one of the biggest flaws in the OnDemand system currently. The solution I have come up with is to create reports and put them in webapplets showing the data I want to show. I have then removed the standard Related Info List Objects and added weblinks to create new records as the button on the List object is also gone.
    Keep in mind that doing this does slow things down a little, so it may not work if you have a big user base.
    RWB.

  • How do I install custom printer profiles in Mac os mountain lion. I can.t fine the icc profiles directory (if that's what it is).

    How do I install custom printer profiles in Mac os mountain lion. I can't find the icc profiles directory (if that's what it is).

    NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder. You'll need to do it again after each system update that's applied.
    OT

  • How can I read the printer snapshot file printers.xml

    How can I read the printer snapshot file printers.xml

    XML files are typically viewed using a web browser.
    Open the XML file and the default program should open it automatically.  If you are prompted to select a program, use the option that lets you choose a program and brows through the directories for your browser (for example, use Internet Explorer, Firefox, etc.).
    If need be, you should be able to right-click the file and select open with to choose the program to open it with.
    There are other XML viewers out ther, but web browsers are typically the default as XML is a web language.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • How do I change language if I can't read the menu?

    How do I change the language if I can't read the menu?

    Hello Mminge,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Apple TV: Changing language settings for system and playback
    http://support.apple.com/kb/HT5255
    Change the system language
    Settings > General > Language
    Best of luck,
    Mario

  • How can I alter the display colours on ios7

    How can I alter the display colours on my iphone and iPad. The new white grey with some bright colours is driving me mad. I have vision problems and this new theme is making it very difficult to use. Turning brightness down doesn't help.

    Thanks fro y reply,
    The problem is that the nr. 3131 dosen't have a MAC/IP address, it was created in Directory Nr. not on the Device/add device, the nr was created to be able to call Avaya agents and the user to not see the personal agent nr ( 3131 ), only the name. The problem is  when a place a call the nr from forwarding appears on the display instead the name I put ( Test ).
    Thanks

Maybe you are looking for

  • Exchange rate gain /loss is not posted in the contract

    Hi Sap People, Exchange rate gain /loss is not posted in the contract(cashflows). This is w.r.t  SAP Banking Module. The open items are posted with a certain exchange rate in the contract at the time of disburesment,while clearing thru FF68(incoming

  • TREX 7.0 (Single/Multiple) Host Configuration Guide

    Dear All, We are going to Configure TREX 7.0 and integration with the CRM 5.0 can anyone guide me in this regard with links or document if any.  This is a bit urgent task need to perform please help me. My mail ID [email protected] Regards, Rao

  • Constant Crashing in Indesign

    I am running Indesign CC on a Windows 7 PC. I am a magazine designer and i build 100 page documents and work on a single document for 2 months at a time. Of late i am constantly having problems with my files crashing when i am trying to move content

  • Upgrade issue from 11.5.3300 to 11.5.3700

    I currently have Crystal Reports Server 11.5.3300.0, and was looking to upgrade to 11.5.3700.0.  When I login to the support site, I  only see the full download for 11.5.3700.  Is there a Serivce Pack or Fix Pack that will allow the upgrade?

  • I web download pages from the internet

    Hi, I recently had to replace my Mac and the time machine backup hasn' had the very latest version of my homepage. Is there an option to download the missing webpages from the homepage to avoid doing them all again? Thank you for your ideas.