My programs don't work anymore with Lion!!!! Help me! Should I wait for patches or reinstall Leopard????

My programs don't work anymore with Lion!!!! Help me! Should I wait for patches or reinstall Leopard????

Which programs?  If they are very old (PowerPC) applications they will never work on Lion.

Similar Messages

  • Video's on apple site don't work anymore after Lion. Help?

    Hi,
    I have a macbook pro, a ipad(1) and iphone 4. You could say I like Apple products. Temted by the advertising I upgraded my operating system to Lion. Now I have problems with some apps that don't work properly anymore and I can't make back-ups on my NAS (Lacie NetworkSpace 2) because Time Machine can't communicate anymore with my NAS. Problems that will probably be solved within weeks or months (that's what Lacie helpdesk says). Let's hope that nothing bad happens in the meantime, because I cannot make back-ups anymore and time capsule is not working anymore.
    Now to my question. I discovered another bug after installing Lion. Visiting the apple.com site with my Macbook Pro I tried to look at a video on this site but the video doesn't start. When I use my iPad I can watch these video's. Also video's in iTunes work on my Macbook. Only the turorial or explanation video's on the apple site don't work anymore. Does somebody know how I can solve this problem?
    I am still a happy Apply user but Lion disappoints a bit (untill now). A lot of people have problems I read. Let's hope the guys at Apple and other firms will solve them all very swiftly. For the time being I would not advise you to upgrade to Lion.
    Peter.

    Sounds like you need to restore your Apple TV to factory settings.
    See this Apple document:
    http://support.apple.com/kb/HT4367
    You will need to use the "Micro USB Cable" to restore it to factory settings.
    See the article shown above.
    You must unplug the power cord before connecting the ATV to your computer....

  • Some font families don't work anymore with Firefox 4 - why?

    Since upgrading to Firefox 4 some font families (like for example "Script") don't work anymore though they were working with Firefox 3.6. How can one solve this?

    You can see it for example here in [http://en.wikipedia.org/wiki/Font_family_%28HTML%29 Wikipedia] where (at least on my screen) most font-families look the same now. I have also attached a screenshot of the table in the article so you can see.
    I don't actually know which font I have installed as I didn't install any in addition. It was propably some system font (is suppose Lucida Handwritig oder Lucida Calligraphy from the looking).
    If there are any special installments required please tell me because I have absolutely no idea about such things.

  • Help, please... all OS-related options/programs don't work anymore

    Hi all,
    the OS-related options are no longer available on my Mac. I cannot start TextEdit, nor can I open the system preferences, the help system or Safari. And it does not shut down. But I can use Quark and Acrobat as usual and create print files etc. Would you know any possibility of how to revive the OS commands? I don't know if there is a connection, but while I was working on very large files I often received the message that the startup volume was nearly full. But I could not believe it because there were 200 or 300 MB still available, and just kept on working. (Now I know that the system needs about 1-2 GB of free space...)
    Thanks for your help!
    iMac   Mac OS X (10.3.9)  
    iMac   Mac OS X (10.3.9)  

    Do this:
    Extended Hard Drive Preparation
    1. Boot from your OS X Installer Disk. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Installer menu (Utilities menu for Tiger.)
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
    3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
    The above is a full extended partition and erase. If you prefer you can do a "quickie" by omitting the Zero Data option. It's there for three reasons: (a) checks and spares any bad blocks on the hard drive; (b) recommended when switching operating systems; and, (c) prevent access to personal data when you sell the computer.

  • Are you kidding us? My passwords don´t work anymore with Firefox, but they do with other browsers! What a shame!

    I have 4 e-mail accounts and I always relied on Firefox because I just love it. All of a sudden, a few hours ago, all my accounts have become inaccessible on Firefox. When I tried to login I was received with a window entitled "Firefox - Choose User Profile" giving one of 2 choices "default - (13 digits)" and "default - (13 others digits)". None of them is known to me and no explanations were given as to what would happen if I choose the one or the other. My blind choice gave me a horrific experience: I have become totally unknown to Firefox and all my data is gone!
    Well, it´s OK with me if Firefox wants to quit business, but why in such a rude way to us who trusted you?
    It is fully possible to access all my accounts with any other browser, but all my data, my favorites, my routines are gone!
    It needs a very convincing apology for me to go back to Firefox.
    Even if this is an accidental failure, it will be hard to trust you again. I am loosing much time and must re-organize myself and my mail. You cannot imagine what this will cost me!
    How can you do this?

    First, calm down. No need to throw a rampage. Go to options > Security: Under passwords make sure remember passwords is checked. If it is go to saved passwords, find the websites in question delete them and then re-enter your login info. It seems that another Firefox profile has been created on your machine, I would suggesting clicking on one to see if it is your original profile if not, then choose the other. Please read this article. (https://support.mozilla.org/en-US/kb/profile-manager-create-and-remove-firefox-profiles)

  • (M-audio) Fast Track Pro - don't work anymore with 4.09

    Hello,
    I use a M-Audio Fast Track Pro as audio interface, and, until yesterday it was working perfect.
    When I installed the Maverick 4.09, my audio interface just stop working!!
    Do you know what could be happening, and how can I solve this?
    Thanks a lot!
    Fernando.

    I had the same problem (Fast Track Pro + Mavericks 10.9.2 > no output sound).
    After trying several combinations, I found out an non logical solution, but it did work
    What I did:
    1) Download the most recent driver update 1.9.4 (http://avid.force.com/pkb/articles/en_US/Download/Fast-Track-Pro-Drivers)
    2) Uninstall Fast Track Pro Drive and restart computer
    3) After restar, do NOT install again. Just go to the System Preferences/Sound and set Fast Track as your in/output port
    Hope it helps!

  • SBH 52 app don't work anymore with Android 4.3

    C6833 unlocked Aus version
    after updating to 4.3 via PC Companion, SBH52 app will no longer trigger from connecting with SBH52. The two devices are connected and can be use for phone, but extra functions like call history, speed dial, "New Events" and the clock on SBH52 no longer displays. 
    Already did the following -
    Reinstall the SBH52 app
    Reinstall SBH52's firmware
    My only speculation is the app requires update.
    Update - Uninstall "Smart Connect" (you cant fully uninstall it bcoz is native) and update it again, this seems to solve the issue. 

    That's very strange.
    Could you both send me a PM with the following information so that i can forward this for further investigation:
    Name:
    Phone nr:
    E-mail:
    Country:
    Operator:
    IMEI nr:
    Build number:
    Smart Connection version
    SBH52 version:
    @oracine
    Could you also try to uninstall updates for Smart Connect under Settings -> Apps -> Smart Connect and let me know if that makes any difference.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Burning video DVD's from any program doesn't work anymore... help!

    Here's the situation:
    I have tried to burn a DVD in idvd and Popcorn, both failed.
    Error message in IDVD was:
    idvd: errors were found during the burning process
    then... there was a problem during multiplexing/burning
    Popcorn reported:
    Drive error:
    The drive reported an error
    Sense Key = Medium Error
    Sense Code = 0x73, 0x03
    I also tried using popcorn to burn from a disk image. I can create a disk image in idvd, but burning from a disk image failed.
    I tried a different video, just in case my files were corrupted. No go.
    I tried a different user. No go.
    I used disk utility, emptied caches and still nothing.
    Then I tried using the finder to burn just data onto the DVD. That worked.
    The media is Maxell DVD-R 16X.
    Please Help!!!!! I am out of warrantee and am not sure what to do here.

    Ditto to the above (slower media may help). Maxell is great media but i'd also try Verbatim DVD-R Minus media....just to see if it works any better.

  • My wife and Iare newbies with iPhone 5s. (Should have waited for the 6.) I have usediTunes for a long time for my iPods, but now we both want to use the iCloud do access different music up there. Any help in doing that? If we can do it, we will be ad

    I'm running iTunes on a PC laptop and ready to move music to an independent hard drive. We want to add more music to it. I have used iTunes for a while for iPods. My wife and I have new iPhone 5S and would like to access the cloud for different types of music, but I will maintain the music in the cloud. (That's my job.) Can 2 iPhones use the same iCloud? We each have different Apple ID's. Thanks.

    Music in the cloud is managed by the separate iTunes Match service ($25/year US). You would sign up to it on the PC, and your music library would be matched with the iTunes Store, and high quality versions of all songs would become available to you on any device also signed into iTunes Match. You should not delete your local copy from the PC, since you should retain a master version of all songs for safety.
    You can use the same iTunes Match service, but you'd see the same music (you say you "would like to access the cloud for different types of music", but I'm not sure what you mean by that).
    Matt

  • Will it mess up my 2010 MBP to upgrade to OS X Lion now or should I wait for 10.7.2?

    Hey Everyone
         I have a 2010 Mac Book Pro and I am wanting to upgrade tothe OS X Lion but I am hearing (and reading online) that several other MBPowners are having massive issues, so I am wondering now that a month has passed since Lion came out is it safe to upgrade yet, or will it mess up my computer like it has to several other users? Also I was wondering is this a problem all MBP owners are having or is it just a small group? Thanks

    Italianldsguy wrote:
    Hey Everyone
         I have a 2010 Mac Book Pro and I am wanting to upgrade tothe OS X Lion but I am hearing (and reading online) that several other MBPowners are having massive issues,
    Several? Please read through this forum, and the Lion forums.
    so I am wondering now that a month has passed since Lion came out is it safe to upgrade yet, or will it mess up my computer like it has to several other users?
    There is absolutely no way to discern that without installing Lion. If/when I install Lion, it will be at least 7.2. Make sure you have two current, tested SL backups before attempting.
    Also I was wondering is this a problem all MBP owners are having or is it just a small group?
    It's not all, and it's far more than a small group.

  • I can't seem to get my iMac (late 2009 model) into automatic sleep mode.  If I manually put it into sleep I don't have any issues.  I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion.

    I can't seem to get my iMac (late 2009 model) into automatic sleep mode.  If I manually put it into sleep I don't have any issues.
    I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion. I now want to fix the underlying problem.
    I'm not running any weird background processes and in my energy saver settings I've tagged "put the hard disk to sleep when possible:, "allow power button to put computer to sleep" and "automatically reduce brigthness". All pretty standard.
    Is there anyone who can give me some pointers ?

    Today I solved the same problem for my iMac running Snow Leopard. See https://discussions.apple.com/thread/3008791#15947706. The method may help you, too.
    For me it was the DynDNS Updater preventing my iMac from automatically entering sleep mode.
    To my knowledge the cause of this sleep problem can only be a peripheral device or a process. So I suggest to first unplug all peripherals and test whether that's the cause. If not, I suggest to terminate one process after another and to test automatic entering of sleep mode after each. Start with user processes; continue with system process if necessary.
    At least that's the way I found the offending process. Fortunately, I was able to change the configuration of that process to allow again automatic entering of sleep mode.
    Good luck!

  • If I upgrade to LION and Word, PP, EpsonScan, Dropbox etc. don't work anymore - what can I do?

    If I upgrade to Lion, and Word, PowerPoint, EpsonScan, Dropbox etc. don't work anymore - what can I do?

    Even if you could upgrade, Lion does not support Power PC apps / Rosetta.
    Lion upgrade questions and answers:  Apple Support Communities
    New Macs come with Lion pre installed. If you can purchase one at some point that way you'd still be able to use the apps you mentioned on the PBook and have another Mac running Lion.

  • Volume and brightness buttons don't work anymore

    I did a complete restore from factory DVD and since then the volume and brightness buttons don't work anymore.  I have an All-in-One AE1900.  Anybody can help me fix this problem?  Since I do not have the original keyboard anymore, I can't use the hot key combination to do it.  Thanks for your help.

    I've had this same problem, but when I am using "Parallels" to run windows programs on my new Macbook Air, with an external Mac LED Cinema Display, the brightness keys on the external apple keyboard do not work.  Sound seems to work fine.  They work fine in Mac mode. 
    Any solutions?

  • Keyboard (hardware & onscreen) suddenly don't work anymore - only factory reset helps

    I have my Passport for about a month now and just experienced the following problem for the second time: all of sudden the keyboard (both hardware and onscreen) don't work anymore. I cannot enter my device password anymore, I can focus the password dialog, but then simply nothing happens when I press keys.
    After a restart of the Passport it asks me for my SIM card PIN. Again, I can focus the text field in the dialog, and I can touch numbers of the onscreen keyboard, and the number keys light up, but no input gets to the dialog.
    There is simply no way to activate the device anymore. I can do a backup using BlackBerry Link, and I can access the device with BlackBerry Blend - but the device itself is useless. No kind of restart or reset helps. The only solution is to do a factory reset, after that the device works fine again - for some time.
    Once this happened while I was on the road, without doing anything with the device. The second time it happened when I was trying to deploy a self written app using the Momentics IDE.
    Additional information:
    - development mode is on (needed since I want to develop Apps for BB10)
    - Snap is installed
    - a handful of Android apps from Google Play store are installed
    - two BlackBerry World apps are installed (whatsapp and HUB++LED)
    Did anyone experienced similar issues or has an idea what might cause this problem?
    Thanks!

    Quote from: Svenomous on 25-September-06, 23:08:26
    Have you tried using a usb keyboard/mouse?
    I don't use any usb, only use PS2. Maybe it is possible to use some sort of a PS2 to usb converter, but I would rather like the PS2 to work.

  • Xperia Neo media server doesn't work anymore with Sony Bravia TV after ICS update!

    Xperia Neo (MT15i) updated from 2.3.4 to 4.0.4 (4.1.B.0.431). I did not perform any reset (factory settings) after the update.
    Media server does not work anymore with Sony Bravia TV KDL40-NX700. With 2.3.4 it worked correctly before.
    When I start the media server on my Xperia Neo and try to view my photos on my Bravia TV it shows connection, I am also able to view different folders on the Smartphone but when it tries to load the photos in any folder on the Smartphone it stops working after a while. Feedback on TV is "cannot connect to media sever". The same procedure worked without any problems when using 2.3.4 before.
    Is this a known issue and is there any solution for this?

    Wow that is a new one, great find!
    I wish I had tested that with my Ray, as I had used the media server feature quite a bit with my DirecTV receiver when on Gingerbread.  But too late, it's on the way back to Sony to get rolled back to Gingerbread.
    Too many other problems with ICS that have crippled my device.
    1) Wi-Fi Hotspot does not work anymore
    2) USB tethering does not work anymore
    3) LED notification issues for incoming SMS
    4) Dialer slow to load
    5) HD Video recording skip frames and jitter.
    6) Bluetooth AVRCP profile broke (can't use the play/pause button on my car stereo anymore)
    If you have not done so take a look at the above features and see what you turn up.
    ~Cheers~
    Bob H
    Minneapolis, MN
    USA
    ST18a  Ray

Maybe you are looking for