My safari is always shutting off and then a box asking me to fill out a report pops up it happens at least once a day, is there anything i could do to stop this?
my safari is always shutting off and then a box asking me to fill out a report pops up it happens at least once a day, is there anything i could do to stop this?
I think you mean it's crashing or quitting unexpectedly.
Most likely due to third party Safari add ons. Follow the instructions for troubleshooting here > Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
If you can't resolve the issue, post a crash report so we can try and help you get Safari going again.
If Safari has just crashed, press the Report button on the CrashReporter dialog box to view the crash information.
Copy/paste the entire contents of the Crash Reporter window into your reply. If the crash report dialog does not appear or the crash is hard to reproduce, crash logs can be retrieved from the ~/Library/Logs/CrashReporter> folder.
Similar Messages
-
iphone wont turn on. i plug it into charger and it stays at 87% and then i take it out of the charger and it shuts off. and then i try to turn it on and wont turn back on until i plug it back into the charger. HELP ME PLEASE!! how do i fix this?!
Hello StephanieeLovezYou,
Thank you for the details of the issue you are experiencing with your iPhone. I would be concerned too if my iPhone was only turning on when connected to power. I found an article with steps you can take when you encounter an issue like this. I recommend following the steps below:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
My issue is still not resolved. What do I do next?
Contact Apple Support.
You can find the full article here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Thank you for using Apple Support Communities.
Best,
Sheila M. -
after hibernation, when trying to login to MacBook Air, it does not accept my password. I have to shut off and then get prompted with the following: Mac OS X wants to use the "login" keychain. I put in the password there and it works. any suggestions?
Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access. -
Machine randomly shuts off and then comes back on.
Hello! Basically whats happening is my computer randomly shuts off (No blue screen just powers off) and then immediately comes back on.
I am running three monitors and a single GPU. This has happened in two different cities (I moved) I have the same surge protector - however, other things on the protector do not reset / go off (alarm clock no battery).
Here are the crash dumps that microsoft said happened. (I uploaded three different ones)
http://www.mediafire.com/download/juwuzck8wpq6j0r/issues.rar
I'm a pretty avid builder but I'm a bit stumped with this issue. The machine will, at random, shut off completely (including lights) and then come back on, during normal activities and gameplay.
The temps do not appear to be reaching astronomic levels, maxing out at around 60-65c (cpu) and 45c for the GPU.
Parts:
cpu - i7 3960x (turbo enabled normal at 3.3, w/ turbo at 3.9ghz)
mobo - MSI X79A-GD45 /// Intel DX79SI (have tried both, it still happens with either, MSI is a new board.
psu - 750 Antec Gold High Current Pro
gpu - MSI Lightning 680 (no OC)
sdd - samsung 840 pro
hdd - Black 1TB
case - HAF 942-x
cooler - x40 kraken
ram - G.SKILL Ripjaws Z Series 32GB (DDR1600)
Here's what I tried
1. Bought a new motherboard (MSI $260) to see if the issue would go away. - Failed.
2. Was able to reproduce the issue VERY quickly when using the OC Genie2 on the MSI board, with teh button pressed, I could boot up OCCT and have it reproduce the issue with the power-off in around 2 minutes of the test. - Failed
3. Attempted PSU and GPU stress test with stock BIOS, tests ran 1 hr+ each with no issues. Shut down my machine and restarted it this morning and the issue came back within 5 minutes of use just sitting at the Windows Desktop. - Failed.
4. Turned the 32 GB of ram to 1600 and enabled XMP, crashed after 3-5 days.
5. Attempting to test each DIMM individually.
6. Issue happened again after about two weeks of not happening.
I've run OCCT for an hour with the "stock" bios and it didn't crash for an entire hour. I've also attempted to use the "OC genie2" overclock function and that triggered a crash within 2 minutes of the run.
Can anyone give me some more things to try? I'm thinking its possible it could be the PSU, but after running OCCT PSU test for 30+ minutes it had no issues.* Bugcheck Analysis *
BAD_POOL_HEADER (19)
The pool is already corrupt at the time of the current request.
This may or may not be due to the caller.
The internal pool links must be walked to figure out a possible cause of
the problem, and then special pool applied to the suspect tags or the driver
verifier to a suspect driver.
Arguments:
Arg1: 0000000000000020, a pool block header size is corrupt.
Arg2: fffffa802224f9e0, The pool entry we were looking for within the page.
Arg3: fffffa802224fa50, The next pool entry.
Arg4: 0000000004070006, (reserved)
Debugging Details:
TRIAGER: Could not open triage file : e:\dump_analysis\program\triage\modclass.ini, error 2
BUGCHECK_STR: 0x19_20
POOL_ADDRESS: GetPointerFromAddress: unable to read from fffff800036ca100
GetUlongFromAddress: unable to read from fffff800036ca1c0
fffffa802224f9e0 Nonpaged pool
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
PROCESS_NAME: chrome.exe
++++++++++++++++++===============================++++++++++++++++++++++==========4
* Bugcheck Analysis *
VIDEO_TDR_TIMEOUT_DETECTED (117)
The display driver failed to respond in timely fashion.
(This code can never be used for real bugcheck).
Arguments:
Arg1: fffffa80262bc4e0, Optional pointer to internal TDR recovery context (TDR_RECOVERY_CONTEXT).
Arg2: fffff8800fa2be20, The pointer into responsible device driver module (e.g owner tag).
Arg3: 0000000000000000, The secondary driver specific bucketing key.
Arg4: 0000000000000000, Optional internal context dependent data.
Debugging Details:
TRIAGER: Could not open triage file : e:\dump_analysis\program\triage\modclass.ini, error 2
FAULTING_IP:
nvlddmkm+153e20
fffff880`0fa2be20 ?? ??? -
How does one shut off and reboot an I Pad? I think you have to hold button to the right for several or more seconds until a red arrow appears. I am not sure and I want to resume my connection to I tunes store and heard this is the best way for them to get back to me with certain info.
Thanks. I tried every method to reconnect to the I Tunes store since the error was cannot connect and I could not update or download apps, even tho the I Pad worked fine otherwise. When it re booted and re set the I tunes store message popped up and asked me for some credit card and other info. When they got it I was back in business and apps could download as before. I tried every other suggestion online and this was my last chance and it worked great. My router had to be re set the other day by turning it off and then on, and that's when all this started happening. Probably changed the I Tunes setting but I never thought it would affect the IPad in any way since all my othe computers worked just fine.
Again, many thanks.
Happyharv -
My phone is basically a paper weight. I have tried to restore it and it won't restore. It did restore for about 2 mins and then it shut off and everything was erased again. I am at my wits end I just want to throw this thing against a way. Any suggestions would be great!! Thank you in advance
Device not detected in iTunes for Windows
-
My MacBook Pro shuts off and then Internet won't work!
Okay so my MacBook Pro used to work perfect but then one day it just shut off then didn't turn back on for like 10 mins! And my charger didn't work so I figured I just had to unplug the middle part! But when I start it back up there are pop ups asking if I should accept or deny! And my clock is set to 2008 and I try to connect to the Internet but it gets an exclamation mark and never works! I've tried restarting it but no change! And sometimes it will work but it won't work for like a week then it does this like every week
I would take your machine into your local Apple Store or an AASP and have them run diagnostics on it and give you an estimate on what it would cost to fix the entire machine. This will be free. If the estimate sounds outrageous, you can always ask about the Apple falt rate repair policy - you could have a 'like new' machine for less than $350US.
Clinton -
Slowness only after switching networks until airport is shut off and then..
Hello. I am asking this for a friend. I did do a search but did not come up with much. When she opens Safari (or Firefox) it is extremely slow at loading pages. If she shuts off the airport utility, waits a second then turns airport back on it seems to work just fine. Seems to happen after she moves to another network, but all of the networks that she moves to are her "known" networks.
Any Ideas???
Thanks everyone.
SteveHi
Did the person at the Apple store test her Airport card?
OpenDNS is an organization providing server codes that work in addition to those supplied by the IP. This helps speed up the flow of information to the computer. Also, provide protection against fraudulent sites (phishing).
Creating a new location rather than using the "automatic" function makes Safari more specific when accessing web sites. By contrast, the Automatic function searches for available networks, so theoretically there is an inherent lag in the process. I have a specific location set up for my Home. When traveling I switch back to Automatic.
You create a separate location by clicking on the Location drop down menu in the System Preferences>Network panel and selecting "edit". When the location panel appears, click on the + button to add a new one to the list. The gear icon on the panel allows you to duplicate or rename a location.
Here's how to enter the DNS codes in Leopard:
In the Network panel select your connection, then select "advanced". In the DNS panel add these codes:
208.67.222.222
208.67.220.220
In the Network panel, if Airport is not at the top of the list, click on the "gear icon" at the left bottom. Select "set service order". When the help box opens drag Airport to the top of the list. Select "apply" when complete.
Restart Safari. -
I have a Macbook Pro 13", that was purchased in 2010-2011. So randomly yesterday, when I boot up my computer I got to the boot screen, then code popped up on my screen. ** I have attached an image of the code below.** But after the code pops up, my computer shuts down, and tries to boot up again. This is an endless loop and doesn't get passed the boot screen. The code shows up everytime.
I personally believe this might be a software issue and not a hardware. Please feel free to shoot out any ideas or a translation of what the code is referring to.
THINGS I HAVE ALREADY DONE:
- Reset the PRAM by holding CMD+Option+P+R
- Gone into Safemode and tired to verify the Harddrive.
- Please don't comment saying, "take out the battery." , "hold the power button for.." , None of that sh#* works.
Below is three different links for the same image. (just in case, **** breaks).
[IMG]http://i57.tinypic.com/2z82stl.jpg[/IMG]
<a href="http://tinypic.com?ref=2z82stl" target="_blank"><img src="http://i57.tinypic.com/2z82stl.jpg" border="0" alt="Image and video hosting by TinyPic"></a>
http://tinypic.com/view.php?pic=2z82stl&s=8#.U0LJidy4nFIWhat happens if you boot holding the command S keys down?
If it stays running in single user mode
try the command
fsck -fy
You could try holding the option key on bootup, to see if presents you with a startup disk however
It looks as if you need to reistall the OS. -
My iphone will shut off and then turn itself back on
I plugged my Iphone in( at60%) and then made a facetime call during the call I noticed my phone was still stuck on 60% after the call I unplugged the phone,plugged it back in nothing happend. So then I hard reset it and it said I had 97% then I decied to turn it off and back off and it went down to 92% now it keeps randomly shutting itself off and turning itself back on every 5-10 minutes. I tried restoring it but Itunes says it cant connect to the update server and to try again.What do I do?
You should try backing up the data, restoring the device as new and try if that solves the problem. NB: set up as NEW device, don't restore with backup, because a software issue will also be in the backup. If the issue persists after restoring as new, the device needs service.
For the steps: http://support.apple.com/kb/HT4137
Good luck! ! -
My macbook pro says Shockwave Flash plug-in has crashed pretty much every day. I have to shut the computer down and restart to fix it. Is there any way I can keep this from happening?
Download the latest version from here ONLY:
http://get.adobe.com/flashplayer/
also, make certain your Mac OS X software is completely up-to-date. There is a Trojan Horse that pretended to be a Flash update, and installed Flash with malware included. The latest security updates removes the malware and all older versions. -
It's not even a month old, but as soon as I turn it on, the fan turns right on and my computer sounds like it is going to explode. It also gets very warm. Any ideas?
check to see what you have loading in your login items. delete the ones you don't need.
open activity monitor, and under all processes, see what's using most of your cpu resources. highlight the ones using the highest % cpu and hit quit process.
see if the sorts it out for you. -
Enter parameters and then click on the option to fill out data
I have a form for entering a start date and end date then click Open report button. The use wants to add a default option on this form to pull out data based on a condition (i.e., only class 1, 2, and 3 to be pulled out
by default). If uncheck the option, the report will show ALL data (i.e., all classes). How can I do that? I think I should change the user requirement so that when he or she clicks on the button, class 1, 2, or 3 to be pulled (by default). And I
will create an option button to pull out all students on that report. Can you please show me which way is better and how to do it? Thank you in advance.Thanks, Karl for your idea. But currently the form has nothing except the Start Date and End Date parameters and a button "open report". Once click, it will open the report with ALL classes.
Now the user wants to add an option control on the form and by default it will pull out records that meet the condition of class =1, class = 2 and class =3. Then after the user enters the dates parameters, and click
on "open report" button, since it's default, the report shows only mentioned data.
If the user uncheck the box, and click on the "open report" button, all classes will show up. How can I deal with this one? Thank you -
When i connect my iPhone to my laptop it will only come up with the option to restore from backup, this has happened 3 times tonight
Can anyone help?The error message you're seeing is likely the other way around -- i.e. something like "This iPhone has previously been synced with a different computer". There's no problem syncing multiple iOS devices to the same computer.
However, the reverse is not true for the iPhone -- you cannot connect an iPhone to another computer without it being erased, even if you manually manage music and video. So, it sounds like you've been syncing your iPhone to a different computer?
Also, 5.1 (not 5.0.1) is the latest iOS. -
My movie wont export to camera roll, it keeps crashing is there anything i can do to stop this?
How can i solve the problem of my ipad crashing when it trys to save my 30min long imovie project?
Are you restoring from backup or as a new device? If from backup, restore as new. Follow this by syncing your content back to the phone. If no change after doing so, make an appointment at any Apple store. There are no more user troubleshooting steps available.
Maybe you are looking for
-
I can no longer login to my router web interface from Safari on iPad.
I made a mistake today. After accidentally opening up the web interface login screen to my router in Safari, I just pressed cancel in the login box. Since then, Safari just hangs on 192.168.0.1 when I want to access the router and the login box no lo
-
Hello Guys, I am new to Microsoft Technologies. Recently i build an C# application using REST service. In this i used ParamQuery Grid to display data in UI. The problem i faced is the Jquery Datepicker is not working. I wrote a function like below:
-
Cd drive doesn't work after upgrade
why doesnt the cd drive work after upgrade to mountain lion 10.8.5
-
Object Id from address SMON trace file
Hi Friends, We have a block corruption in undo TBS ( I guess as SMON crashes while dp ) in one of our database ,10.2.0.5.0. In the trace file generated, I saw the following lines Block header dump: 0x0297ce55 Object id on Block? Y seg/obj: 0x508f3
-
Studio Creator - Pointbase database - ApplicationModel - AppModel4 - DDL ?
Hello, Does anyone know how i can get the DDL text from the Pointbase database for the AppModel4 tutorial. Basically, i want to use that DDL to create some tables in Oracle. In Creator, i see where you can write SQL to query specific tables, but the