My screen change from white to off-white, before that it was looking like water has been poured inside then it started fading away to off-white [creamish]

My screen change from white to off-white, before that it was looking like water has been poured inside then it started fading away to off-white [creamish]

Try here:
iOS: Not responding or does not turn on
If you can't turn it off then let the battery fully drain. After charging for at least an hour try the article again.
If still problem time for an appointment at the Genius Bar of an Apple store. It appears you have a hardware problem.

Similar Messages

  • My search box in the upper right side of the screen changed from Google to Ebay without intentional action on my part and I have been unable to find a way to get rid of the ebay search tool and get google back.

    When I first went to do a search using the search box on the right side of the toolbar I noticed it had a different icon. It was so so small I did not recognize it as Ebay until I hit search and it was then I realized my search tool had somehow been changed. The only use my wife had made of the computer since the prior evening was to view an email from the president of a local charity sending an updated roster of officers. I did look at the user profile file and saw that it showed the profile changed as of 7:46 am which was when my wife looked at the email. I tried deleting the file but firefox would not run without it so I restored the file. Our internet security program is Avast.

    Here's a simple explanation of how to fix the problem:
    https://support.mozilla.com/en-US/kb/Search%20bar
    Worked for me today!! (Even when opening a new browser window.)
    Cheers!
    Shaunalei

  • Background color changed from white to yellow and =25% changed to %% on email

    I type =25% on my email and sent out, background color changed from white to yellow and =25% changed to %%.

    Try leaving a space after the =
    Thus: = 25%
    Where and when did it change? Did it change inside Thunderbird? Did it change in the Sent folder? Or in a reply to you?
    = and % are used in certain types of email encoding; =20% often appears, meaning character 0x20 which is 32 denary or the space character. It is often used where an explicit space would be illegal, and this is common in URLs and other links. I'm thinking that =25% similarly has a special meaning. It ''shouldn't'' get decoded, but software is buggy.
    I can't reproduce it here, which is why I'm asking about how and when it changes. Where does the Microsoft software come into it?

  • Opened Notes and screen changed from listing my notes to no notes. How do I recover them?  TY

    Opened Notes and screen changed from listing my notes to no notes. How do I recover the missing notes?

    Would you please explain how you did this? Most of my Notes dissapeared after the latest update. I tried restoring them from TM, but nothing shows up and QuickLook only shows (null). I took them from the IMAPnote file under (eventually) CoreData (~Library/Containers...), but that is not working for me. My Notes are synced with iCloud, so my solution may be different from yours.
    Thank you.

  • Since itunes 2.0.4 has been downloaded. My ipod doesn't synchronize properly/ at all.The LED screen shows  "copy 1 or 2 from 101" and it will remain like that. It looks like sync but there's nothing to happen. It doesn't stop by it self. How to solve?

    Since itunes 2.0.4 has been downloaded my ipod doesn't synchronize properly/ at all. The LED screen shows çopying 1 or 2 from 101' and itt will remain like that.
    It looks like sync but nothing is happening. The sync doesn't stop by itself. Is there anybody to solve this problem? In previous versions never a problem.

    I have exactly the same issues with my new 80G iPOD. I have found that when connecting to my PC, the iPOD does not start iTUNES 7. This can be resolved by stopping the iPOD Service in Computer Management, connecting the iPOD and then starting it again. Then when you start iTUNES it finds the iPOD. - http://docs.info.apple.com/article.html?artnum=93716
    Seems like a stupid long-winded way to do things, but at least you can get some stuff on to your iPOD.
    As far as using Restore goes - I just get the restoring iPOD message you described, which it blatantly isn't :((
    DELL   Windows XP Pro  

  • How can I send scanned files, which are documents changed from doc to PDF, as documents that can be edited if the recipient doesn't have Adobe capabilities?

    How can I send scanned files, which are documents changed from doc to PDF, as documents that can be edited if the recipient doesn't have Adobe capabilities?

    Hi flaviusjack,
    If you still have the .doc files, it might be best to send those to your recipients so they can be edited. Otherwise, you can use ExportPDF to convert the PDF files back to .doc format. But, again, that step would be unnecessary if you have the .doc files.
    Best,
    Sara

  • HT1926 When I click on the iTunes icon or iTunes from programs I get this: the item 'itunes.exe that this short cut refers to has been changed or moved.

    When I click on the iTunes icon or iTunes from programs I get this: the item 'itunes.exe that this short cut refers to has been changed or moved. So this short cut will no longer work.

    Let's try a repair install of iTunes first.
    Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", click "Change" and then click "Repair".
    Can you launch your iTunes now?

  • HT201441 I am from Kosovo, in Kosovo there isn't any apple store, I took my phone to fix in a shop and they changed my Icloud, my phone is now deactivated accidentally but the shops password has been hacked. I dont know what to do about it.

    I am from Kosovo, in Kosovo there isn't any apple store, I took my phone to fix in a shop and they changed my Icloud, my phone is now deactivated accidentally but the shops password has been hacked. I dont know what to do about it. If there was an apple store here i could take my phone there and fix it but i dont know what to do since i can't find the Icloud password. My phone remains deactivated. The people from mobi shop dont take the responisibility they say its not their fault the Icloud got hacked. Please help me because Iphones are very expensive here I had to work alot to get one. And when i finally got one it doesnt work.

    Well we know whose fault it is but we cant do anything about it because of the hackers but i was hoping someone could help me in some other way. if i send You the apple id and everything could the apple stores there do anything about my problem. Cuz in kosovo i can never fix it.

  • I was looking at a tanning website today and then I logged off and went to eat lunch.  When I came back, I got on Facebook and on the side were ads for tanning.  What do I do so that this won't happen?  I feel like something is wrong.

    I was looking at a tanning website today and then I logged off and went to eat lunch.  When I came back, I got on Facebook and on the side were ads for tanning.  What do I do so that this won't happen?  I feel like something is wrong.  I have heard Macs don't get viruses, but I still have Norton Virus Protection.  What is this and how do I make it not do it again!
    On another note, my trash can all of the sudden started asking for my password when I move something to it.  It is extremely annoying when I want to delete more than one thing.  Is there a way to make that not happen too?    Thank ya'll!

    1. Triple-click the line below to select it:
    ~/.Trash
    2. Right-click or control-click the highlighted line and select
    Services ▹ Show Info
    from the contextual menu.* An Info dialog should open.
    3. The dialog should show "You can read and write" in the Sharing & Permissions section. If that's not what it shows, click the padlock icon in the lower right corner of the window and enter your password when prompted. Use the plus- and minus-sign buttons to give yourself Read & Write access and "everyone" No Access. Delete any other entries in the access list.
    4. In the General section, uncheck the box marked Locked if it's checked.
    5. From the action menu (gear icon) at the bottom of the dialog, select Apply to enclosed items and confirm.
    6. Close the Info window and test.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.
    Remove the Norton/Symantec product by following the instructions on either of these pages:
    Uninstalling your Norton product for Mac
    Removing Symantec programs for Macintosh
    If you have a different version of the product, the procedure may be different. Back up all data before making any changes.
    From the Safari menu bar, select
    Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
    and confirm. Consider installing an ad-blocker and/or a selective cookie block such as the "Ghostery" Safari extension.

  • Iphone4 would not restore Error -50. I have tried to restore and it restored it to the point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out.

    Iphone would not restore---- Error -50. I have tried to restore, and it restored it to the new point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out. I can see earlier backups in my C:\Documents and Settings\user\Application Data\Apple Computer\MobileSync\Backup folder. There are four subfolders in this address. I need my contacts, photos, and messages back. I know this is a common error but I can not figure it out. I have ran the other troublshoot items in the error steps for 13 and 14 like apple says. Is there a way to call apple and get a step by step of how to restore from another restore point? Does anybody have a solution????

    It tells you to go to Error 13 and 14 if you receive error (-50).
    Here is what I have tried...
    Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
    Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting. I have moved it around to different ports.
    Put a USB 2.0 hub between the device and the computer. Didn't change anything.
    Try a different USB 30-pin dock-connector cable.
    Eliminate third-party security software conflicts. Removed all virus protection and firewall.
    There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.Used the Microsoft fix it.
    Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online. Doesn't matter.
    Try to restore from another known-good computer and network. I do not know how to do this or how to find the correct/full/complete restore point. There should be more information for this.

  • Can't figure out why colors don't totally change when you select type with curser? It looks like it has by looking at it, but when you highlight the area after the old color is still there. It happens with objects to. Driving me NUTZ. Help!

    Can't figure out why colors don't totally change when you select type with curser? It looks like it has by looking at it, but when you highlight the area after the old color is still there. It happens with objects to. Driving me NUTZ. Help!

    Select the text, and open the Appearance palette (Come on guys, text highlight is irrelevant, it happens to objects too says the OP), and see what's listed there.  For a simple text object, there should only be a line item "Type", followed by "Characters", and when double-clicked the Characters line item expands to tell you the stroke and fill color.  For a basic object, there should be a fill and/or stroke.
    What happens sometimes, is that you end up adding extra strokes/fills to objects or text, and the appearance palette is where that will be noted.  Especially when you are dealing with groups, and/or picking up a color with the eyedropper, you may inadvertently be adding a fill or stroke on top of something.  You can drag those unwanted thingies from the Appearance palette into its own little trash can.

  • My iphone4s's screen was broken.The ups has been taken away to repaire,i want to know is not all free?

    Hello,
    My iphone4s's screen was broken.The ups has been taken away to repaire, maybe change a new one for me. I want to know is that all free? Thank you, have a nice day.

    I'm in France, after my iphone screen broken, I asked the official website to repair. Then ups contact me and pick up my phone. Just tell me within 48 hours of mobile phone back to me.

  • Hello, I would like to buy an I Pod Classic 160 GB and have heard that the volume limit in Europe has been reduced from the factory. Are the devices in the U.S.A also affected?

    Hello, I would like to buy an I Pod Classic 160 GB and have heard that the volume limit in Europe has been reduced from the factory.
    Are the devices in the U.S.A also affected?
    Volker

    No, they are not. But getting round this is not that simple.
    Until recently, the European Volume Limit that you're referring to affected iPods sold within the EU (European Union countries), so one purchased in the US would not be affected by this. Nor, in theory, would an iPod purchased in Norway or Russia, since neither of them are in the EU.
    However, iPod Classics now sold within the UK (where I live) now appear to have an option to disable the EU Volume Limit. I would assume therefore, that this option is available on an iPod Classic bought anywhere within the EU. The firmware on an iPod Classic that can turn off the EU volume Limit is 2.0.5.
    iPod Classics running earlier versions of the firmware (including 2.0.4) cannot be upgraded. I have personally seen one with 2.0.5 Mac on it in an Apple Store and the EU limit could be turned off. Check the picture from Badgorr in this thread New Option to turn off EU Volume Cap?  (It's towards the bottom of the page.) However, non-Apple stores may still have older stock, so be aware of this when you go shopping.
    Experience tells me that buying an iPod from outside the European Union area is not that simple and you are unlikely to manage it. Apple will not ship goods to another country. So either you travel to the US to buy one from a shop (that's a bit extravagant) or you persuade someone else to buy one and send it to you. However, not only will you have the cost of shipping, but in either case, your country's tax department will almost certainly add tax to it when it comes into the country. The service delivering it will apply the tax and charge you for doing so as well or you get charged by the customs department at the airport.

  • HT201077 After updating my iPhone4s to the lastest update my photostream stopped updated onto my comuter.  From my phone it looks like pictures have been moved into the photostream folder... but they are not showing up on my computer.  Help!

    After updating my iPhone4s to the lastest update my photostream stopped updated onto my comuter.  From my phone it looks like pictures have been moved into the photostream folder... but they are not showing up on my computer.  Help!
    I have signed out then back into the cloud.  I have comfirmed location of the photostream folder.  I have have even restored settings on my phone.  any ideas on what I can do to get it working again?  or do I have to accept defect, and manually save my photos?

    There's a whole lot to read in your post, and frankly I have not read it all.
    Having said that, this troubleshooting guide should help:
    http://support.apple.com/kb/TS1538
    In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

  • I have changed my PC and want to authorise it on itunes match, it looks like it has but still says i have 5 machines authorise

    i have changed my PC and want to authorise it on itunes match, it looks like it has but still says i have 5 machines authorise    

    Sign-in to your iTunes Account, you can see which computers are authorised.  If necessary de-authorise all and authorise those again that you need.

Maybe you are looking for

  • How to print BAR CODE in SAP SMART FORMS

    Hi, I want to print inspection lot's BAR CODE in the smart form, but i dont know the way how to print this into the smartform. if anyone have any idea, please suggest me how to print this as it is urgent for me to complete the object. Thanks in advan

  • Error while deploying the application to remote server

    Dear All, I am trying to deploy the application to remote server directly from jdeveloper ide.The server is on LAN and installed on other PC,I can also access the console and login correctly to console. After doing application server connection and t

  • Disk Utility Freezes...

    Along with other standard Mac apps, like calculator.... I am getting so annoyed with my Powerbook G4 (running OS X Panther)... I recently had a problem with what I believe started because of a faulty downloaded font which ended up in me having to re-

  • Lightroom 4 and Raw RAW 7

    I have Lightroom 4.3 and want to use Camera RAW 7.1 for RAW/DNG editing/conversion. I downloaded the latest build of ACR 7.1 and attempted to install; I needed Adobe Application Manager 6, the installation said. I downloaded and installed that, insta

  • Rp_provide_from_last   regarding doubts

    Dear All,                 I am using rp_provide_from_last to fetch a record from the  infotype. I am getting only the last record  from the infotype by  i need all the record between the valid date range. my date range is      01.04.2005  to 31.03.20