My second Generation ipod touch is not being recognized by the computer and is not charging.
I plug it in but it wont charge and windows says the device has malfunctioned. help please.
Try the following and then try a restore:
- A reset.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Placing the iPod in recovery mode. See:
iPhone and iPod touch: Unable to update or restore
- Placing in DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Similar Messages
-
My ipod is not being recognized by my computer AND itunes
When i connect my ipod, its not getting recognized by the computer AND itunes. i've read all the troubleshooting things and nothing works. is there someone who could help me please? i can't put any music, movies or anything on my ipod and just a while ago, all my songs got deleted so i'm listening to very little music now. please help me!
from,
troubled traviesoDid you try using another usb port? my hardrive has two maybe yours does. And if you have a game console, some of those have usb ports so plug your ipod in there and see if that reconizes it.
-
My external HD of 1TB is not being recognized by the iMac and when after a long waiting period it does, the whole computer becomes extremely slow. Do I need any particular add-on to make it workable?
Before I updated to OS X Mavericks I was using another external disk that was getting disconnected ocasionally so I bought a new ADATA HD710 portable 1TB Drive and moved the files to it. This new drive which is supposed to be OS X Mavericks compatible takes minutes to show the files especially when opening second and third level folders which has made mu iMac unusable
What should I do?Your Mac should be able to recognize many different types of drives (including Windows-formatted drives) immediately for Reading, provided they are in good working condition and not damaged. There should be no need to transfer to a different type of drive.
If there is no recognition of this drive, see if it can be seen in Disk Utility.
If your aim is to transfer the data on it DO NOT use ERASE or PARTITION as these will completely erase all the information on the Drive.
If the drive is present while the Mac sleeps, it is likely to drop out and not be seen any longer, especially if it is a USB-powered drive. -
My iPad is not being recognized by the computer, therefore, cannot sync. It charges when plugged to the wall, but not when pugged to iMac.
Most common culprits include the cable. Try swapping it out for a different one.. or not having the most recent version of itunes. I once even solved this problem by shutting down the computer for 2 minutes. (the longer the better), with the ipad plugged in. starting it up... then itunes recognizes it, launches, and syncs.
Apple has a troubleshooting assistant on this topic:
http://www.apple.com/support/ipad/assistant/itunes/
It will advise you to reboot. I recommend shutting down instead.
--Sam
P.S The ipad should charge when asleep and plugged into your Mac. The charging behavior is normal. There isn't enough power out the USB ports to charge the ipad while it is on on some older Macs and nearly all PCs. -
Anyone elses contacts not being recognized by the Phone and Message apps?
Anyone elses contacts not being recognized by the Phone and Message apps? Updated to 5.0.1 on my 4S and this is what happened
am having the same problem on verizon. never had this issue on my 3G...
-
I need help. I have a Window's 8 computer and a 6th generation Ipod nano. I have reinstalled Itunes multiple times and have read all the troubleshooting ideas to do it, but my ipod is still not being recognized. This is not the first time I've plugged the Ipod in. I need help
This came from another thread, but worked for me. Problem is with newest iTunes 4.62. Unistall iTunes, as well as its helper programs (Apple Application Support, Apple Mobile Device Support, and Apple Software Update). Reboot, and reinstall iTunes. It will reinstall all the other ones and you should be able to connect your nano. Good luck.
-
My daughter's Ipod Touch 8gb isn't recognized by itunes or my computer. It keeps asking for an install disc which I don't have and I have basic computer knowledge, but not advanced. What can I do to fix this problem?
Have you been through these at all?
iTunes 7 doesn't recognize the iPod.
Your Windows PC doesn't recognize iPod</font color</a>.
iPod appears in Windows Explorer but does not appear in iTunes.
iPod does not appear in iTunes.
Fast user switching in Windows XP is not supported.
Strange iPod behavior. -
I am trying to import from the camera into an I-MAC. I'm told the I-mac does not have the firewire port, but has thunderbolt. Is the only way to get video from the camera via a firewire port? Is someone giving me bad information as to the firewire port not being on the I-MAC? The camera is not being recognized. Thanks in advance.
Apple has moved on from Firewire and the current iMacs (and most MBPs) have Thunderbolt, USB3 and USB2.
There are Firewire toThunderbolt adaptors. Here's one. You also want a four pin to nine pin FW cable to run from your camera to the adaptor.
Russ -
My memory sticks are not being recognized by the computer...
I just installed 4 1gb sticks of memory in pairs and all of the same maker. I already had 2.5gb of memory installed. Once I turned on my computer and clicked the apple, it is showing that I only have the 2 gb of memory installed! Why is it not showing the other 4 gigs? It is saying those slots are empty and all 8 slots are occupied. I have a total of 6gbs but am only showing 2gb. I restarted my computer twice and keep getting the same result. All memory sticks are seated firmly in the slots as well.
Any suggestions?
I bought the memory sticks from a reliable vendor that sells Mac products.I don't have the slightest idea of what you are talking about LOL! How do I do cold boot? How do I reset the nvram?
Another thing I noticed that was odd is that I took all memory out of the computer and installed just the 1gb sticks totaling 4gbs. Once I turned on the computer, my desktop screen would not show up on my screen. I got a solid blue screen instead. Once I removed all those sticks and replaced with the sticks previously installed my desktop screen returned! The new memory sticks are brand spanking new. Perhaps I could have had them installed incorrectly as I had them all in the same bank. I Will experiment again tomorrow.
Message was edited by: DVX100Shooter -
Hi... I really need some help from you guys. My ipod touch is not responding whenever I connect it to my PC. It gives no feedback. The battery image that is shown when I charge my ipod touch doesn't show up unlike if I charge it using the wall charger. I have used different kinds of ports and I ended up with similar things. No response! . However, I can still use my ipod and play music with it. The only problem is its syncing ability is gone. I have only used it for a year now and the warranty that came with it is expired. I hope I can get a good answer from you guys. ThanKs!!!
I am afraid that the solution did not work... the ipod touch of mine seems really not functioning. It receives an electric isgnal from the computer but it doesnt sync at all... Whenever I put my ipod touch off and plug it to my computer it turns on but it doesnt sync... .. Moreover, I have used different PCs so as to try it syncing.. I have used mac book pro and windows 7 laptops but it gives similar feedback, which is NO FEEDBACK at all...
-
Help please! My ipod touch has been acting a little funny lately (freezing often, running out of battery even though it's off, skipping or stopping tracks...). Now it's just plain frozen- it will not respond to holding the middle button down for long periods of time or the off button. it is just blank except for up top still has the same text as usual "ipod" with the time in the center and a full battery charge icon. I have tried everything but restoring as I will lose 85% of my music b/c my old files were lost when my old computer died and now are only on the ipod. Any suggestions? Thanks!
have you tried holding down the home + sleep button together? this could possibly work.
-
My ipod touch 5th gen went through the wash the other day while it was on and it came out not working at all. I was wondering if there was a way to get any of my photos and videos off of it so i could put them on my computer. Anything will do, from do it yourself methods to companies that will do it for you.
- If they are in an iPod backup then restore another iPod, iPad or iPhone from that backup. See the restore topic of:
iOS: How to back up
- If they are in the iTunes backup then get them from the backup by:
Recover iPhone, iPad or iPod photos from backups with Picturescue
- If you used PhotoStream then try getting photos (only) from your PhotoStream. See that topic of:
iOS: Importing personal photos and videos from iOS devices to your computer
- A data recovery company can likely get them off the iPod. Be prepared to pay alot. Google for iPhone data recovery -
Malfunctioning iPod, not being recognized by the computer. Why?
Ok, yesterday I wanted to update my iPod so I plugged it in and I got an error message about my USB malfunctioning and then my ipod was frozen on "do not disconnect". I unfroze it and tried again. Same thing. Then I changed ports and same problem. I kept unfreezing and got rid of the songs I added thinking they might be messing it up. I plugged it in and I thought it was fine. When I checked it the next day when I wanted to use it all my songs were gone. I plugged it back in, restored the iPod settings and it still doesn't recognize it. Its telling me "iTunes cannot read the contents of the iPod '__ iPod'. Go to the summary tab in iPod preferences to restore settings it the factory settings." It won't let me restore, though because of an unknown error. What is the problem and how do I fix it?
Have you had a chance to look at these troubleshooting pages? They may be of some help:
iPod missing in My Computer and in iTunes
iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
Microsoft Support - A computer that is running Windows XP cannot detect a USB thumb drive, an Apple iPod, or an external hard disk drive
If you are using a laptop, this page might help: iPod not recognized when connected to Windows laptop over USB -
Has anyone gotten a solution to the issue of the shuffle not being recognized by the computer?
I have an old shuffle and can't get it to show up on my computer. It also won't sync new music that I've bought without going through ridiculous actions (removing iTunes and re-installing). Anyone have a solution?
If "iTunes pops up and shows me what I have on the shuffle," how can it NOT "show up in devices on iTunes." You have to select the shuffle under DEVICES (in iTunes) to see what is on the shuffle. It seems like the two things you said are mutually exclusive.
Also, earlier you said you can't get the shuffle to show up on the computer, but if iTunes pops up when you plug in the shuffle, it seems to be showing up.
I guess your description is not clear to me... -
Having a problem with the DVD drive not being recognized by the computer
Compaq Presario CQ60-215DX NOTEBOOK PC, WINDOWS VISTA, Error 10 when trying to reinstall the driver, says cannot start.
I went thru the HP troubleshooting and it said to see the mfg of drive to solve problem! I finally bought a new DVD drive P/N498479-001 for replacement . uninstalled the old drive & then reinstalled the new drive , restarted the computer & it still will not recognize the DVD player! Same error code, same problem. The problem started when I tried to play a CD that appeared to be scratched pretty badly, however my desk top played the CD with out problems? When you click on "computer" the drive does not show up!
I did install a new router a couple of days before this happened, but I am using a data cable to it, so that should not be a problem. Any Ideas?Apple has moved on from Firewire and the current iMacs (and most MBPs) have Thunderbolt, USB3 and USB2.
There are Firewire toThunderbolt adaptors. Here's one. You also want a four pin to nine pin FW cable to run from your camera to the adaptor.
Russ
Maybe you are looking for
-
my iPod nano 5th generation is not recognized by iTunes. I did update, but still, it won't work. I don't want to uninstall the iTunes cos I don't want to lose my music and audio books. What to do? It started after I updated iTunes.
-
How do I save just the video and audio I need for a project
I typically run 3-4 video cameras at an event that lasts 2 hours, but only want to keep about 30-60 min of the video. I don't always have the time to do more than a rough edit and am looking for a way to: 1 maintain the original quality , and 2 get r
-
Determine the Java Class File Major & Minor Version
Did anyone tried to look at the Major & Minor version of a specific java class file. Our server is running in version 1.3. We are including a third party class file, I like to check before our production move, whether the file is compiled is <= Jdk1.
-
Since the size() method often occupies much resource and slow down speed greatly, why not implement it by "select count(*) from ..." instead of "resultSet.last()"? I think when executing a query, a Query will remember the actual SQL executed, and mod
-
External No range for depreciation documents
Hi Gurus, This is reg dep.doc. no range. Why we need to select depreciaton document no range (AF) with external check box always. Please reply. Thanks and Regards Balu